duketrapp Posted April 14, 2006 Share Posted April 14, 2006 (edited) Hi again... I have a small prob with a listview item.. cant find any threads about that...maybe u can help me out.. prob is: i have a listview filled with some listviewitems.. when the user select an item of the listview, different other controls get there specific settings.. = works great ..BUT.. when u click on an item in listview, than hold the mousebutton down and move the mouse in any direction (curser change to drag/drop icon) over the listview and release the selected item, the other controls DONT get there settings!!!.. i thnk the prob is that the listview dont send the id from the click on the listviewitem, when u click,drag and release the listviewitem... the listview thnks its an drag/drop action and dont notice the click... ..so i thinked about it and best possible choice for me is to completely DISABLE the DRAG ABILITY of the listview.. how can i do that???... i found some comands that set the ability to accept droped files but no comands for disable the ability of a control to be "draggable"... .. i hope u understand my prob.. maybe u know a hint... thnks for help.. salute.. Edited April 14, 2006 by duketrapp AVIfileLength,WMPSendKeycontrolled,... Link to comment Share on other sites More sharing options...
duketrapp Posted April 14, 2006 Author Share Posted April 14, 2006 thnks for help..salute.. no ideas?!?!?!.... AVIfileLength,WMPSendKeycontrolled,... Link to comment Share on other sites More sharing options...
Valuater Posted April 14, 2006 Share Posted April 14, 2006 from stylesWS_EX_ACCEPTFILES 0x00000010 Allow an edit or input control within the created GUI window to receive filenames via drag and drop. The control must have also the $GUI_DROPACCEPTED state set by GUICtrlSetState.make sure that this "WS_EX_ACCEPTFILES" is NOT in the create line8) Link to comment Share on other sites More sharing options...
duketrapp Posted April 15, 2006 Author Share Posted April 15, 2006 (edited) from styles make sure that this "WS_EX_ACCEPTFILES" is NOT in the create line 8) hey man.. ive seen that in docu but it says "Allow an edit or input control within the created GUI window to >>>!!!!"""RECEIVE"""!!!!<<< filenames".. Thats not my prob.....i want to kill the ability to GRAB an item out of the list.... check this out... #include <GUIConstants.au3> GUICreate("check", 300, 300, 1, 1) GUICtrlSetState( -1, $GUI_SHOW) $check_list = GUICtrlCreateListView("col1|col2|col3", 5, 5, 290, 150, $LVS_SHOWSELALWAYS+$LVS_SINGLESEL) $1 = GUICtrlCreateListViewItem ( "text1|text1|text1", $check_list ) $2 = GUICtrlCreateListViewItem ( "text2|text2|text2", $check_list ) $getit = GUICtrlCreateLabel("test", 5, 200, 290, 20) GUISetState () Do $msg = GuiGetMsg () Select Case $msg = $1 GUICtrlSetData($getit, GUICtrlRead($1)) Case $msg = $2 GUICtrlSetData($getit, GUICtrlRead($2)) EndSelect Until $msg = $GUI_EVENT_CLOSE ..u see i try to create without "WS_EX_ACCEPTFILES" and it still not workin.... click on "text1" listviewitem, DONT release the mousebutton and pull the item under the list... label text will not change... voila... still shit.. .. other ideas?.. Edited April 15, 2006 by duketrapp AVIfileLength,WMPSendKeycontrolled,... Link to comment Share on other sites More sharing options...
GaryFrost Posted April 15, 2006 Share Posted April 15, 2006 Requires beta and uses listview events expandcollapse popup; Events - ListView #include <GuiConstants.au3>;Inclusion file for the GUI interface controls #include <GuiListView.au3> Global $ListView Global Const $WM_NOTIFY = 0x004E Global Const $DebugIt = 1 ;ListView Events Global Const $NM_FIRST = 0 Global Const $NM_LAST = (-99) Global Const $NM_OUTOFMEMORY = ($NM_FIRST - 1) Global Const $NM_CLICK = ($NM_FIRST - 2) Global Const $NM_DBLCLK = ($NM_FIRST - 3) ;~ Global Const $NM_RETURN = ($NM_FIRST - 4) ;~ Global Const $NM_RCLICK = ($NM_FIRST - 5) ;~ Global Const $NM_RDBLCLK = ($NM_FIRST - 6) ;~ Global Const $NM_SETFOCUS = ($NM_FIRST - 7) ;~ Global Const $NM_KILLFOCUS = ($NM_FIRST - 8) ;~ Global Const $NM_CUSTOMDRAW = ($NM_FIRST - 12) ;~ Global Const $NM_HOVER = ($NM_FIRST - 13) ;~ Global Const $NM_NCHITTEST = ($NM_FIRST - 14) ;~ Global Const $NM_KEYDOWN = ($NM_FIRST - 15) ;~ Global Const $NM_RELEASEDCAPTURE = ($NM_FIRST - 16) ;~ Global Const $NM_SETCURSOR = ($NM_FIRST - 17) ;~ Global Const $NM_CHAR = ($NM_FIRST - 18) ;~ Global Const $NM_TOOLTIPSCREATED = ($NM_FIRST - 19) Global Const $LVN_FIRST = -100 Global Const $LVN_BEGINDRAG = ($LVN_FIRST - 9) #endregion End Global variables Opt("WinTitleMatchMode", 2) $main_GUI = GUICreate("GuiRegisterMsg Test", 225, 400, 300, 10, BitOR($WS_THICKFRAME, $WS_SIZEBOX)) $ListView = GUICtrlCreateListView("Entry Name|Category", 5, 75, 195, 280, BitOR($LVS_SORTASCENDING, $LVS_SINGLESEL)) _GUICtrlListViewSetColumnWidth ($ListView, 0, 100) _GUICtrlListViewSetColumnWidth ($ListView, 1, 100) GUICtrlSendMsg($ListView, $LVM_SETEXTENDEDLISTVIEWSTYLE, $LVS_EX_GRIDLINES, $LVS_EX_GRIDLINES) GUICtrlSendMsg($ListView, $LVM_SETEXTENDEDLISTVIEWSTYLE, $LVS_EX_FULLROWSELECT, $LVS_EX_FULLROWSELECT) GUICtrlCreateListViewItem("Name 1|Category 1", $ListView) GUICtrlCreateListViewItem("Name 2|Category 2", $ListView) GUISetState() ;Register WM_NOTIFY events GUIRegisterMsg($WM_NOTIFY, "WM_Notify_Events") While 1 $msg = GUIGetMsg() Switch $msg ;----------------------------------------------------------------------------------------- ;This case statement exits and updates code if needed Case $GUI_EVENT_CLOSE Exit ;----------------------------------------------------------------------------------------- ;put all the misc. stuff here Case Else ;;; EndSwitch WEnd Func ListView_Click() ;---------------------------------------------------------------------------------------------- If $DebugIt Then ConsoleWrite (_DebugHeader ("$NM_CLICK")) ;---------------------------------------------------------------------------------------------- EndFunc ;==>ListView_Click Func ListView_DoubleClick() ;---------------------------------------------------------------------------------------------- If $DebugIt Then ConsoleWrite (_DebugHeader ("$NM_DBLCLK")) ;---------------------------------------------------------------------------------------------- MsgBox(0,"Double Clicked", _GUICtrlListViewGetItemText ($ListView, _GUICtrlListViewGetSelectedIndices($ListView))) EndFunc ;==>ListView_DoubleClick ; ; WM_NOTIFY event handler Func WM_Notify_Events($hWndGUI, $MsgID, $wParam, $lParam) #forceref $hWndGUI, $MsgID, $wParam Local $tagNMHDR, $event, $hwndFrom, $code, $tagNMLISTVIEW $tagNMHDR = DllStructCreate("int;int;int", $lParam);NMHDR (hwndFrom, idFrom, code) If @error Then Return $event = DllStructGetData($tagNMHDR, 3) Select Case $wParam = $ListView Select Case $event = $NM_CLICK ListView_Click () Case $event = $NM_DBLCLK ListView_DoubleClick () Case Else $tagNMLISTVIEW = DllStructCreate("int;int;int;int;int;uint;uint;uint;int;int;int", $lParam) Select Case $event = $LVN_BEGINDRAG ConsoleWrite("Drag Event:" & @LF) ConsoleWrite("Item: " & _GUICtrlListViewGetItemText ($ListView, DllStructGetData($tagNMLISTVIEW,4)) & @LF) EndSelect EndSelect EndSelect $tagNMHDR = 0 $event = 0 $lParam = 0 EndFunc ;==>WM_Notify_Events Func _DebugHeader($s_text) Return _ "!===========================================================" & @LF & _ "+===========================================================" & @LF & _ "-->" & $s_text & @LF & _ "+===========================================================" & @LF EndFunc ;==>_DebugHeader SciTE for AutoItDirections for Submitting Standard UDFs Don't argue with an idiot; people watching may not be able to tell the difference. Link to comment Share on other sites More sharing options...
duketrapp Posted April 15, 2006 Author Share Posted April 15, 2006 (edited) Requires beta and uses listview events .. .. i thnk its a lot of goodlookin stuff over there but can u give ur hint a bit more transparency.. .. im still learnin autoit.. so... beta is ok.. im usin it... and the code u posted... when i look at it i thnk my problem should be killed here : Select Case $event = $LVN_BEGINDRAG ConsoleWrite("Drag Event:" & @LF) ConsoleWrite("Item: " & _GUICtrlListViewGetItemText ($ListView, DllStructGetData($tagNMLISTVIEW,4)) & @LF) EndSelect ..but... ..i realy dont know what to do with this.. :"> .. so maybe u can give me a small advise... ..btw .. i thought this would be easy.. but.. when its that kínda difficult to kill the ability i thnk i can survive with this small bug in my script.. cause i dont want start and change anythng in the autoit standards or includes if this affects any other control devices... maybe i need drag and drop ability later in an listview... Edited April 15, 2006 by duketrapp AVIfileLength,WMPSendKeycontrolled,... Link to comment Share on other sites More sharing options...
GaryFrost Posted April 15, 2006 Share Posted April 15, 2006 .. .. i thnk its a lot of goodlookin stuff over there but can u give ur hint a bit more transparency.. .. im still learnin autoit.. so... beta is ok.. im usin it... and the code u posted... when i look at it i thnk my problem should be killed here : Select Case $event = $LVN_BEGINDRAG ConsoleWrite("Drag Event:" & @LF) ConsoleWrite("Item: " & _GUICtrlListViewGetItemText ($ListView, DllStructGetData($tagNMLISTVIEW,4)) & @LF) EndSelect ..but... ..i realy dont know what to do with this.. :"> .. so maybe u can give me a small advise... ..btw .. i thought this would be easy.. but.. when its that kínda difficult to kill the ability i thnk i can survive with this small bug in my script.. cause i dont want start and change anythng in the autoit standards or includes if this affects any other control devices... maybe i need drag and drop ability later in an listview... I don't know how to kill the ability, maybe Holger does, but you said the info wasn't filling in when the user clicked and dragged, I was showing you that you could get the info, then it would be up to you to use that info to fill in what needs to be done. SciTE for AutoItDirections for Submitting Standard UDFs Don't argue with an idiot; people watching may not be able to tell the difference. Link to comment Share on other sites More sharing options...
duketrapp Posted April 15, 2006 Author Share Posted April 15, 2006 ...it would be up to you to use that info to fill in what needs to be done.y..... i knowed that u say somethng like that... .. i can do a lot with the autoit comands and scite till now... but this code above looks like chinese for me.. ..but thnks a lot for ur hint... maybe ill find a way when im deeper in autoit AVIfileLength,WMPSendKeycontrolled,... Link to comment Share on other sites More sharing options...
GaryFrost Posted April 15, 2006 Share Posted April 15, 2006 y..... i knowed that u say somethng like that... .. i can do a lot with the autoit comands and scite till now... but this code above looks like chinese for me.. ..but thnks a lot for ur hint... maybe ill find a way when im deeper in autoit Sorry it looks chinese for you, but you didn't provide any code to adapt it to.Gary SciTE for AutoItDirections for Submitting Standard UDFs Don't argue with an idiot; people watching may not be able to tell the difference. Link to comment Share on other sites More sharing options...
duketrapp Posted April 16, 2006 Author Share Posted April 16, 2006 Sorry it looks chinese for you, but you didn't provide any code to adapt it to. Gary .. look above.. #include <GUIConstants.au3> GUICreate("check", 300, 300, 1, 1) GUICtrlSetState( -1, $GUI_SHOW) $check_list = GUICtrlCreateListView("col1|col2|col3", 5, 5, 290, 150, $LVS_SHOWSELALWAYS+$LVS_SINGLESEL) $1 = GUICtrlCreateListViewItem ( "text1|text1|text1", $check_list ) $2 = GUICtrlCreateListViewItem ( "text2|text2|text2", $check_list ) $getit = GUICtrlCreateLabel("test", 5, 200, 290, 20) GUISetState () Do $msg = GuiGetMsg () Select Case $msg = $1 GUICtrlSetData($getit, GUICtrlRead($1)) Case $msg = $2 GUICtrlSetData($getit, GUICtrlRead($2)) EndSelect Until $msg = $GUI_EVENT_CLOSE ..no code?... AVIfileLength,WMPSendKeycontrolled,... Link to comment Share on other sites More sharing options...
GaryFrost Posted April 16, 2006 Share Posted April 16, 2006 expandcollapse popup; Events - ListView #include <GuiConstants.au3>;Inclusion file for the GUI interface controls #include <GuiListView.au3> Global $ListView Global Const $WM_NOTIFY = 0x004E Global Const $DebugIt = 1 ;ListView Events Global Const $NM_FIRST = 0 Global Const $NM_LAST = (-99) Global Const $NM_OUTOFMEMORY = ($NM_FIRST - 1) Global Const $NM_CLICK = ($NM_FIRST - 2) Global Const $NM_DBLCLK = ($NM_FIRST - 3) ;~ Global Const $NM_RETURN = ($NM_FIRST - 4) ;~ Global Const $NM_RCLICK = ($NM_FIRST - 5) ;~ Global Const $NM_RDBLCLK = ($NM_FIRST - 6) ;~ Global Const $NM_SETFOCUS = ($NM_FIRST - 7) ;~ Global Const $NM_KILLFOCUS = ($NM_FIRST - 8) ;~ Global Const $NM_CUSTOMDRAW = ($NM_FIRST - 12) ;~ Global Const $NM_HOVER = ($NM_FIRST - 13) ;~ Global Const $NM_NCHITTEST = ($NM_FIRST - 14) ;~ Global Const $NM_KEYDOWN = ($NM_FIRST - 15) ;~ Global Const $NM_RELEASEDCAPTURE = ($NM_FIRST - 16) ;~ Global Const $NM_SETCURSOR = ($NM_FIRST - 17) ;~ Global Const $NM_CHAR = ($NM_FIRST - 18) ;~ Global Const $NM_TOOLTIPSCREATED = ($NM_FIRST - 19) Global Const $LVN_FIRST = -100 Global Const $LVN_BEGINDRAG = ($LVN_FIRST - 9) #endregion End Global variables Opt("WinTitleMatchMode", 2) $main_GUI = GUICreate("GuiRegisterMsg Test", 225, 400, -1,-1, BitOR($WS_THICKFRAME, $WS_SIZEBOX)) $ListView = GUICtrlCreateListView("Entry Name|Category", 5, 5, 215, 280, BitOR($LVS_SORTASCENDING, $LVS_SINGLESEL)) _GUICtrlListViewSetColumnWidth ($ListView, 0, 100) _GUICtrlListViewSetColumnWidth ($ListView, 1, 100) GUICtrlSendMsg($ListView, $LVM_SETEXTENDEDLISTVIEWSTYLE, $LVS_EX_GRIDLINES, $LVS_EX_GRIDLINES) GUICtrlSendMsg($ListView, $LVM_SETEXTENDEDLISTVIEWSTYLE, $LVS_EX_FULLROWSELECT, $LVS_EX_FULLROWSELECT) GUICtrlCreateListViewItem("Name 1|Category 1", $ListView) GUICtrlCreateListViewItem("Name 2|Category 2", $ListView) $getit = GUICtrlCreateLabel("test", 5, 290, 215, 20) GUISetState() ;Register WM_NOTIFY events GUIRegisterMsg($WM_NOTIFY, "WM_Notify_Events") While 1 $msg = GUIGetMsg() Switch $msg ;----------------------------------------------------------------------------------------- ;This case statement exits and updates code if needed Case $GUI_EVENT_CLOSE Exit ;----------------------------------------------------------------------------------------- ;put all the misc. stuff here Case Else ;;; EndSwitch WEnd Func ListView_Click() ;---------------------------------------------------------------------------------------------- If $DebugIt Then ConsoleWrite (_DebugHeader ("$NM_CLICK")) ;---------------------------------------------------------------------------------------------- EndFunc ;==>ListView_Click Func ListView_DoubleClick() ;---------------------------------------------------------------------------------------------- If $DebugIt Then ConsoleWrite (_DebugHeader ("$NM_DBLCLK")) ;---------------------------------------------------------------------------------------------- MsgBox(0,"Double Clicked", _GUICtrlListViewGetItemText ($ListView, _GUICtrlListViewGetSelectedIndices($ListView))) EndFunc ;==>ListView_DoubleClick ; ; WM_NOTIFY event handler Func WM_Notify_Events($hWndGUI, $MsgID, $wParam, $lParam) #forceref $hWndGUI, $MsgID, $wParam Local $tagNMHDR, $event, $hwndFrom, $code, $tagNMLISTVIEW $tagNMHDR = DllStructCreate("int;int;int", $lParam);NMHDR (hwndFrom, idFrom, code) If @error Then Return $event = DllStructGetData($tagNMHDR, 3) Select Case $wParam = $ListView Select Case $event = $NM_CLICK ListView_Click () Case $event = $NM_DBLCLK ListView_DoubleClick () Case Else $tagNMLISTVIEW = DllStructCreate("int;int;int;int;int;uint;uint;uint;int;int;int", $lParam) Select Case $event = $LVN_BEGINDRAG GUICtrlSetData($getit,_GUICtrlListViewGetItemText ($ListView, DllStructGetData($tagNMLISTVIEW,4))) EndSelect EndSelect EndSelect $tagNMHDR = 0 $event = 0 $lParam = 0 EndFunc ;==>WM_Notify_Events Func _DebugHeader($s_text) Return _ "!===========================================================" & @LF & _ "+===========================================================" & @LF & _ "-->" & $s_text & @LF & _ "+===========================================================" & @LF EndFunc ;==>_DebugHeader SciTE for AutoItDirections for Submitting Standard UDFs Don't argue with an idiot; people watching may not be able to tell the difference. Link to comment Share on other sites More sharing options...
duketrapp Posted April 17, 2006 Author Share Posted April 17, 2006 .. y works fine.. thnks for ur help... there r still few chinese parameters for me, but i thnks ill get this after a time... btw... the debug part... is that just for testin output or is it needed for this to run correctly?.. AVIfileLength,WMPSendKeycontrolled,... Link to comment Share on other sites More sharing options...
GaryFrost Posted April 17, 2006 Share Posted April 17, 2006 .. y works fine.. thnks for ur help... there r still few chinese parameters for me, but i thnks ill get this after a time... btw... the debug part... is that just for testin output or is it needed for this to run correctly?..debug or not to debug, just for testing, if you take it out, make sure you remove all references to it. SciTE for AutoItDirections for Submitting Standard UDFs Don't argue with an idiot; people watching may not be able to tell the difference. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now