Jump to content

Imperial To Metric Converter

RazerM

By RazerM,
in AutoIt Example Scripts

 Share

Recommended Posts

RazerM Universalist

RazerM

Posted
Posted (edited)

It isn't finished yet, i will add metric to imperial conversion(done). I will also add temperature(done),area and volume conversion. 

#include "trans.au3"
$language = IniRead(@ScriptDir & "\config.ini", "Language", "Lang", "UK English")
If Not FileExists(@ScriptDir & "\config.ini") Then
    IniWrite(@ScriptDir & "\config.ini", "Language", "Lang", "UK English")
    IniWrite(@ScriptDir & "\config.ini", "Notes", "NOTE:", "Use 'UK English' OR 'American English'")
EndIf
Global $LANG = GetLangArray($language)
#include <GUIConstants.au3>

GUICreate("Imperial to Metric Converter", 600, 300)
$tab=GUICtrlCreateTab(10, 10, 580, 280)
;length
GUICtrlCreateTabItem("Length")
GUICtrlCreateLabel("Imperial:", 20, 35)
$imperial = GUICtrlCreateInput("", 20, 50, 150)
GUICtrlCreateLabel("Metric:", 270, 35)
$metric = GUICtrlCreateInput("", 270, 50, 150)
$convert = GUICtrlCreateButton("Convert", 180, 50, 80, 25);, $BS_DEFPUSHBUTTON)
$iunits = GUICtrlCreateCombo("Inches", 20, 80)
GUICtrlSetData($iunits, "Feet|Yards|Miles")
$munits = GUICtrlCreateCombo($LANG[1], 270, 80);$munits = GUICtrlCreateCombo("Centimetres", 270, 80)
GUICtrlSetData($munits, $LANG[2]);GUICtrlSetData($munits, "Millimetres|Metres|Kilometres")
;length a
GUICtrlCreateLabel("Imperial:", 270, 130)
$imperiala = GUICtrlCreateInput("", 20, 145, 150)
GUICtrlCreateLabel("Metric:", 20, 130)
$metrica = GUICtrlCreateInput("", 270, 145, 150)
$converta = GUICtrlCreateButton("Convert", 180, 145, 80, 25);, $BS_DEFPUSHBUTTON)
$iunitsa = GUICtrlCreateCombo("Inches", 270, 175)
GUICtrlSetData($iunitsa, "Feet|Yards|Miles")
$munitsa = GUICtrlCreateCombo($LANG[3], 20, 175);$munitsa = GUICtrlCreateCombo("Centimetres", 20, 175)
GUICtrlSetData($munitsa, $LANG[4]);GUICtrlSetData($munitsa, "Millimetres|Metres|Kilometres")

;mass
GUICtrlCreateTabItem("Mass")
GUICtrlCreateLabel("Imperial:", 20, 35)
$imperial2 = GUICtrlCreateInput("", 20, 50, 150)
GUICtrlCreateLabel("Metric:", 270, 35)
$metric2 = GUICtrlCreateInput("", 270, 50, 150)
$convert2 = GUICtrlCreateButton("Convert", 180, 50, 80, 25);, $BS_DEFPUSHBUTTON)
$iunits2 = GUICtrlCreateCombo("Ounces", 20, 80)
GUICtrlSetData($iunits2, "Pounds|Stone")
$munits2 = GUICtrlCreateCombo("Kilograms", 270, 80)
GUICtrlSetData($munits2, "Milligrams|Grams")
;mass a
GUICtrlCreateLabel("Imperial:", 270, 130)
$imperial2a = GUICtrlCreateInput("", 20, 145, 150)
GUICtrlCreateLabel("Metric:", 20, 130)
$metric2a = GUICtrlCreateInput("", 270, 145, 150)
$convert2a = GUICtrlCreateButton("Convert", 180, 145, 80, 25);, $BS_DEFPUSHBUTTON)
$iunits2a = GUICtrlCreateCombo("Ounces", 270, 175)
GUICtrlSetData($iunits2a, "Pounds|Stone")
$munits2a = GUICtrlCreateCombo("Kilograms", 20, 175)
GUICtrlSetData($munits2a, "Milligrams|Grams")

;temp
GUICtrlCreateTabItem("Temperature")
GUICtrlCreateLabel("Fahrenheit:", 20, 35)
$imperial3 = GUICtrlCreateInput("", 20, 50, 150)
GUICtrlCreateLabel("Celsius:", 270, 35)
$metric3 = GUICtrlCreateInput("", 270, 50, 150)
$convert3 = GUICtrlCreateButton("Convert", 180, 50, 80, 25);, $BS_DEFPUSHBUTTON)
GUICtrlCreateLabel("Fahrenheit:", 270, 130)
$imperial3a = GUICtrlCreateInput("", 20, 145, 150)
GUICtrlCreateLabel("Celsius:", 20, 130)
$metric3a = GUICtrlCreateInput("", 270, 145, 150)
$convert3a = GUICtrlCreateButton("Convert", 180, 145, 80, 25);, $BS_DEFPUSHBUTTON)
GUICtrlCreateTabItem("")
GUISetState()
;~ $change = 1
; the commented lines below were meant to change default button on each tab. There is two buttons on each tab so it isn't needed
While 1
;~  If GUICtrlRead($tab) = 0 And $change <> GUICtrlRead($tab) Then GUICtrlSetStyle($convert, $BS_DEFPUSHBUTTON)
;~  If GUICtrlRead($tab) = 1 And $change <> GUICtrlRead($tab) Then GUICtrlSetStyle($convert2, $BS_DEFPUSHBUTTON)
;~  If GUICtrlRead($tab) = 2 And $change <> GUICtrlRead($tab) Then GUICtrlSetStyle($convert3, $BS_DEFPUSHBUTTON)
;~  $change = GUICtrlRead($tab)
    Switch GUIGetMsg()
    Case $GUI_EVENT_CLOSE
        Exit
    Case $convert
        Length(0)
    Case $converta
        Length(1)
    Case $convert2
        Mass(0)
    Case $convert2a
        Mass(1)
    Case $convert3
        GUICtrlSetData($metric3, (GUICtrlRead($imperial3)-32)*(5/9) & " °c")
    Case $convert3a
        GUICtrlSetData($metric3a, GUICtrlRead($imperial3a)*(9/5)+32 & " °F")
;~  Case 
    EndSwitch
WEnd

Func Length($type)
    If $type = 0 Then
        If GUICtrlRead($iunits) = "Inches" Then
            $metrictemp = GUICtrlRead($munits)
            If $metrictemp = $LANG[5] Then;         If $metrictemp = "Centimetres" Then
                GUICtrlSetData($metric, GUICtrlRead($imperial)*2.54 & " cm")
            ElseIf $metrictemp = $LANG[6] Then;         ElseIf $metrictemp = "Millimetres" Then
                GUICtrlSetData($metric, GUICtrlRead($imperial)*25.4 & " mm")
            ElseIf $metrictemp = $LANG[7] Then;         ElseIf $metrictemp = "Metres" Then
                GUICtrlSetData($metric, GUICtrlRead($imperial)*0.0254 & " m")
            ElseIf $metrictemp = $LANG[8] Then;         ElseIf $metrictemp = "Kilometres" Then
                If GUICtrlRead($imperial) <= 3 Then GUICtrlSetData($metric, StringFormat("%0.5f",GUICtrlRead($imperial)*0.00003) & " km")
                If GUICtrlRead($imperial) > 3 Then GUICtrlSetData($metric, GUICtrlRead($imperial)*0.00003 & " km")
            EndIf
        ElseIf GUICtrlRead($iunits) = "Feet" Then
            $metrictemp = GUICtrlRead($munits)
            If $metrictemp = $LANG[9] Then;         If $metrictemp = "Centimetres" Then
                GUICtrlSetData($metric, GUICtrlRead($imperial)*30.48 & " cm")
            ElseIf $metrictemp = $LANG[10] Then;            ElseIf $metrictemp = "Millimetres" Then
                GUICtrlSetData($metric, GUICtrlRead($imperial)*304.8 & " mm")
            ElseIf $metrictemp = $LANG[11] Then;            ElseIf $metrictemp = "Metres" Then
                GUICtrlSetData($metric, GUICtrlRead($imperial)*0.3048 & $LANG[12]);             GUICtrlSetData($metric, GUICtrlRead($imperial)*0.3048 & " m")
            ElseIf $metrictemp = $LANG[13] Then;            ElseIf $metrictemp = "Kilometres" Then
                GUICtrlSetData($metric, GUICtrlRead($imperial)*0.0003 & " km")
            EndIf
        ElseIf GUICtrlRead($iunits) = "Yards" Then
            $metrictemp = GUICtrlRead($munits)
            If $metrictemp = $LANG[14] Then;            If $metrictemp = "Centimetres" Then
                GUICtrlSetData($metric, GUICtrlRead($imperial)*91.44 & " cm")
            ElseIf $metrictemp = $LANG[15] Then;            ElseIf $metrictemp = "Millimetres" Then
                GUICtrlSetData($metric, GUICtrlRead($imperial)*914.4 & " mm")
            ElseIf $metrictemp = $LANG[16] Then;            ElseIf $metrictemp = "Metres" Then
                GUICtrlSetData($metric, GUICtrlRead($imperial)*0.9144 & " m")
            ElseIf $metrictemp = $LANG[17] Then;            ElseIf $metrictemp = "Kilometres" Then
                GUICtrlSetData($metric, GUICtrlRead($imperial)*0.00091 & " km")
            EndIf
        ElseIf GUICtrlRead($iunits) = "Miles" Then
            $metrictemp = GUICtrlRead($munits)
            If $metrictemp = $LANG[18] Then;            If $metrictemp = "Centimetres" Then
                GUICtrlSetData($metric, GUICtrlRead($imperial)*160930 & " cm")
            ElseIf $metrictemp = $LANG[19] Then;            ElseIf $metrictemp = "Millimetres" Then
                GUICtrlSetData($metric, GUICtrlRead($imperial)*1609300 & " mm")
            ElseIf $metrictemp = $LANG[20] Then;            ElseIf $metrictemp = "Metres" Then
                GUICtrlSetData($metric, GUICtrlRead($imperial)*1609.3 & " m")
            ElseIf $metrictemp = $LANG[21] Then;            ElseIf $metrictemp = "Kilometres" Then
                GUICtrlSetData($metric, GUICtrlRead($imperial)*1.6093 & " km")
            EndIf
        Else
            GUICtrlSetData($metric, "")
        EndIf
    ElseIf $type = 1 Then
        If GUICtrlRead($iunitsa) = "Inches" Then
            $metricatemp = GUICtrlRead($munitsa)
            If $metricatemp = $LANG[22] Then;           If $metricatemp = "Centimetres" Then
                GUICtrlSetData($metrica, GUICtrlRead($imperiala)/2.54 & " in")
            ElseIf $metricatemp = $LANG[23] Then;           ElseIf $metricatemp = "Millimetres" Then
                GUICtrlSetData($metrica, GUICtrlRead($imperiala)/25.4 & " in")
            ElseIf $metricatemp = $LANG[24] Then;           ElseIf $metricatemp = "Metres" Then
                GUICtrlSetData($metrica, GUICtrlRead($imperiala)/0.0254 & " in")
            ElseIf $metricatemp = $LANG[25] Then;           ElseIf $metricatemp = "Kilometres" Then
                If GUICtrlRead($imperiala) <= 3 Then GUICtrlSetData($metrica, StringFormat("%0.5f",GUICtrlRead($imperiala)/0.00003) & " in")
                If GUICtrlRead($imperiala) > 3 Then GUICtrlSetData($metrica, GUICtrlRead($imperiala)/0.00003 & " in")
            EndIf
        ElseIf GUICtrlRead($iunitsa) = "Feet" Then
            $metricatemp = GUICtrlRead($munitsa)
            If $metricatemp = $LANG[26] Then;           If $metricatemp = "Centimetres" Then
                GUICtrlSetData($metrica, GUICtrlRead($imperiala)/30.48 & " ft")
            ElseIf $metricatemp = $LANG[27] Then;           ElseIf $metricatemp = "Millimetres" Then
                GUICtrlSetData($metrica, GUICtrlRead($imperiala)/304.8 & " ft")
            ElseIf $metricatemp = $LANG[28] Then;           ElseIf $metricatemp = "Metres" Then
                GUICtrlSetData($metrica, GUICtrlRead($imperiala)/0.3048 & " ft")
            ElseIf $metricatemp = $LANG[29] Then;           ElseIf $metricatemp = "Kilometres" Then
                GUICtrlSetData($metrica, GUICtrlRead($imperiala)/0.0003 & " ft")
            EndIf
        ElseIf GUICtrlRead($iunitsa) = "Yards" Then
            $metricatemp = GUICtrlRead($munitsa)
            If $metricatemp = $LANG[30] Then;           If $metricatemp = "Centimetres" Then
                GUICtrlSetData($metrica, GUICtrlRead($imperiala)/91.44 & " yds")
            ElseIf $metricatemp = $LANG[31] Then;           ElseIf $metricatemp = "Millimetres" Then
                GUICtrlSetData($metrica, GUICtrlRead($imperiala)/914.4 & " yds")
            ElseIf $metricatemp = $LANG[32] Then;           ElseIf $metricatemp = "Metres" Then
                GUICtrlSetData($metrica, GUICtrlRead($imperiala)/0.9144 & " yds")
            ElseIf $metricatemp = $LANG[33] Then;           ElseIf $metricatemp = "Kilometres" Then
                GUICtrlSetData($metrica, GUICtrlRead($imperiala)/0.00091 & " yds")
            EndIf
        ElseIf GUICtrlRead($iunitsa) = $LANG[34] Then;      ElseIf GUICtrlRead($iunitsa) = "Miles" Then
            $metricatemp = GUICtrlRead($munitsa)
            If $metricatemp = $LANG[35] Then;           If $metricatemp = "Centimetres" Then
                GUICtrlSetData($metrica, GUICtrlRead($imperiala)/160930 & " mi")
            ElseIf $metricatemp = $LANG[36] Then;           ElseIf $metricatemp = "Millimetres" Then
                GUICtrlSetData($metrica, GUICtrlRead($imperiala)/1609300 & " mi")
            ElseIf $metricatemp = $LANG[37] Then;           ElseIf $metricatemp = "Metres" Then
                GUICtrlSetData($metrica, GUICtrlRead($imperiala)/1609.3 & " mi")
            ElseIf $metricatemp = $LANG[38] Then;           ElseIf $metricatemp = "Kilometres" Then
                GUICtrlSetData($metrica, GUICtrlRead($imperiala)/1.6093 & " mi")
            EndIf
        Else
            GUICtrlSetData($metrica, "")
        EndIf
    EndIf
EndFunc ;==>Length

Func Mass($type)
    If $type = 0 Then
        If GUICtrlRead($iunits2) = "Ounces" Then
            $metric2temp = GUICtrlRead($munits2)
            If $metric2temp = "Kilograms" Then
                GUICtrlSetData($metric2, GUICtrlRead($imperial2)*0.02835 & " kg")
            ElseIf $metric2temp = "Milligrams" Then
                GUICtrlSetData($metric2, GUICtrlRead($imperial2)*28350 & " mg")
            ElseIf $metric2temp = "Grams" Then
                GUICtrlSetData($metric2, GUICtrlRead($imperial2)*28.35 & " g")
            EndIf
        ElseIf GUICtrlRead($iunits2) = "Pounds" Then
            $metric2temp = GUICtrlRead($munits2)
            If $metric2temp = "Kilograms" Then
                GUICtrlSetData($metric2, GUICtrlRead($imperial2)*0.4536 & " kg")
            ElseIf $metric2temp = "Milligrams" Then
                GUICtrlSetData($metric2, GUICtrlRead($imperial2)*453600 & " mg")
            ElseIf $metric2temp = "Grams" Then
                GUICtrlSetData($metric2, GUICtrlRead($imperial2)*453.6 & " g")
            EndIf
        ElseIf GUICtrlRead($iunits2) = "Stone" Then
            $metric2temp = GUICtrlRead($munits2)
            If $metric2temp = "Kilograms" Then
                GUICtrlSetData($metric2, GUICtrlRead($imperial2)*6.5303 & " kg")
            ElseIf $metric2temp = "Milligrams" Then
                GUICtrlSetData($metric2, GUICtrlRead($imperial2)*6350300 & " mg")
            ElseIf $metric2temp = "Grams" Then
                GUICtrlSetData($metric2, GUICtrlRead($imperial2)*6350.3 & " g")
            EndIf
        Else
            GUICtrlSetData($metric2, "")
        EndIf
    ElseIf $type = 1 Then
                If GUICtrlRead($iunits2a) = "Ounces" Then
            $metric2atemp = GUICtrlRead($munits2a)
            If $metric2atemp = "Kilograms" Then
                GUICtrlSetData($metric2a, GUICtrlRead($imperial2a)/0.02835 & " oz")
            ElseIf $metric2atemp = "Milligrams" Then
                GUICtrlSetData($metric2a, GUICtrlRead($imperial2a)/28350 & " oz")
            ElseIf $metric2atemp = "Grams" Then
                GUICtrlSetData($metric2a, GUICtrlRead($imperial2a)/28.35 & " oz")
            EndIf
        ElseIf GUICtrlRead($iunits2a) = "Pounds" Then
            $metric2atemp = GUICtrlRead($munits2a)
            If $metric2atemp = "Kilograms" Then
                GUICtrlSetData($metric2a, GUICtrlRead($imperial2a)/0.4536 & " lbs")
            ElseIf $metric2atemp = "Milligrams" Then
                GUICtrlSetData($metric2a, GUICtrlRead($imperial2a)/453600 & " lbs")
            ElseIf $metric2atemp = "Grams" Then
                GUICtrlSetData($metric2a, GUICtrlRead($imperial2a)/453.6 & " lbs")
            EndIf
        ElseIf GUICtrlRead($iunits2a) = "Stone" Then
            $metric2atemp = GUICtrlRead($munits2a)
            If $metric2atemp = "Kilograms" Then
                GUICtrlSetData($metric2a, GUICtrlRead($imperial2a)/6.5303 & " stone")
            ElseIf $metric2atemp = "Milligrams" Then
                GUICtrlSetData($metric2a, GUICtrlRead($imperial2a)/6350300 & " stone")
            ElseIf $metric2atemp = "Grams" Then
                GUICtrlSetData($metric2a, GUICtrlRead($imperial2a)/6350.3 & " stone")
            EndIf
        Else
            GUICtrlSetData($metric2a, "")
        EndIf
    EndIf
EndFunc ;==>Mass
tell me what you think

and trans.au3 is 

#include <array.au3>

Func GetLangArray($language)
    If $language = "UK English" Then
        local $i = 1
        local $aLang[1]
        local $tempvar
            
        while 1
            $tmpvar = IniRead(@ScriptDir & "\lang.lng","Data",$i, "e_r_r_0_r")
            $i += 1
            if $tmpvar <> "e_r_r_0_r" Then
                _ArrayAdd($aLang,$tmpvar)
            Else
                ExitLoop
            EndIf
        WEnd
        
        Return $aLang
    ElseIf $language = "American English" Then
        local $i = 1
        local $aLang[1]
        local $tempvar
            
        while 1
            $tmpvar = IniRead(@ScriptDir & "\lang2.lng","Data",$i, "e_r_r_0_r")
            $i += 1
            if $tmpvar <> "e_r_r_0_r" Then
                _ArrayAdd($aLang,$tmpvar)
            Else
                ExitLoop
            EndIf
        WEnd
        
        Return $aLang
    EndIf
EndFunc

imperial_metric.zip Download that it has all files in it including the two language files(can't upload here). After running read config.ini to change language

Edited by RazerM
My Programs:AInstall - Create a standalone installer for your programUnit Converter - Converts Length, Area, Volume, Weight, Temperature and Pressure to different unitsBinary Clock - Hours, minutes and seconds have 10 columns each to display timeAutoIt Editor - Code Editor with Syntax Highlighting.Laserix Editor & Player - Create, Edit and Play Laserix LevelsLyric Syncer - Create and use Synchronised Lyrics.Connect 4 - 2 Player Connect 4 Game (Local or Online!, Formatted Chat!!)MD5, SHA-1, SHA-256, Tiger and Whirlpool Hash Finder - Dictionary and Brute Force FindCool Text Client - Create Rendered ImageMy UDF's:GUI Enhance - Enhance your GUIs visually.IDEA File Encryption - Encrypt and decrypt files easily! File Rename - Rename files easilyRC4 Text Encryption - Encrypt text using the RC4 AlgorithmPrime Number - Check if a number is primeString Remove - remove lots of strings at onceProgress Bar - made easySound UDF - Play, Pause, Resume, Seek and Stop.
Link to comment
Share on other sites
RazerM Universalist

RazerM

Posted
  • Author
Posted

So what did you actually write lol. Anyway how is it?

My Programs:AInstall - Create a standalone installer for your programUnit Converter - Converts Length, Area, Volume, Weight, Temperature and Pressure to different unitsBinary Clock - Hours, minutes and seconds have 10 columns each to display timeAutoIt Editor - Code Editor with Syntax Highlighting.Laserix Editor & Player - Create, Edit and Play Laserix LevelsLyric Syncer - Create and use Synchronised Lyrics.Connect 4 - 2 Player Connect 4 Game (Local or Online!, Formatted Chat!!)MD5, SHA-1, SHA-256, Tiger and Whirlpool Hash Finder - Dictionary and Brute Force FindCool Text Client - Create Rendered ImageMy UDF's:GUI Enhance - Enhance your GUIs visually.IDEA File Encryption - Encrypt and decrypt files easily! File Rename - Rename files easilyRC4 Text Encryption - Encrypt text using the RC4 AlgorithmPrime Number - Check if a number is primeString Remove - remove lots of strings at onceProgress Bar - made easySound UDF - Play, Pause, Resume, Seek and Stop.
Link to comment
Share on other sites
Infinitex0 Polymath

Infinitex0

Posted
Posted (edited)

It's very good, why don't you make it so you can convert something of the same system into something else.

Or in understandable terms feet to inches and etc.

Oh and I don't think that you spelled meters right (you have metres)

Edited by Infinitex0

The below statement is False.The above statement is True.a lesson I learned from Greenmachine; give a man a code and he'll solve one problem. Teach a man to code and he'll solve all his problems.P.S please don't use autoIt as a virus creator/spyware maker(keyLogger especially)Cick this and help me[center]My Scripts:[/center][center]Port Scanner[/center]

Link to comment
Share on other sites
RazerM Universalist

RazerM

Posted
  • Author
Posted

i'm in the UK and it is definetely metre.

My Programs:AInstall - Create a standalone installer for your programUnit Converter - Converts Length, Area, Volume, Weight, Temperature and Pressure to different unitsBinary Clock - Hours, minutes and seconds have 10 columns each to display timeAutoIt Editor - Code Editor with Syntax Highlighting.Laserix Editor & Player - Create, Edit and Play Laserix LevelsLyric Syncer - Create and use Synchronised Lyrics.Connect 4 - 2 Player Connect 4 Game (Local or Online!, Formatted Chat!!)MD5, SHA-1, SHA-256, Tiger and Whirlpool Hash Finder - Dictionary and Brute Force FindCool Text Client - Create Rendered ImageMy UDF's:GUI Enhance - Enhance your GUIs visually.IDEA File Encryption - Encrypt and decrypt files easily! File Rename - Rename files easilyRC4 Text Encryption - Encrypt text using the RC4 AlgorithmPrime Number - Check if a number is primeString Remove - remove lots of strings at onceProgress Bar - made easySound UDF - Play, Pause, Resume, Seek and Stop.
Link to comment
Share on other sites
Infinitex0 Polymath

Infinitex0

Posted
Posted

Just searched on wiki here

turns out it's both.

The below statement is False.The above statement is True.a lesson I learned from Greenmachine; give a man a code and he'll solve one problem. Teach a man to code and he'll solve all his problems.P.S please don't use autoIt as a virus creator/spyware maker(keyLogger especially)Cick this and help me[center]My Scripts:[/center][center]Port Scanner[/center]

Link to comment
Share on other sites
RazerM Universalist

RazerM

Posted
  • Author
Posted (edited)

i have added multilingual support thanks to libre's program. Put American English or UK English in the config.ini(it's generated after first run)

Edited by RazerM
My Programs:AInstall - Create a standalone installer for your programUnit Converter - Converts Length, Area, Volume, Weight, Temperature and Pressure to different unitsBinary Clock - Hours, minutes and seconds have 10 columns each to display timeAutoIt Editor - Code Editor with Syntax Highlighting.Laserix Editor & Player - Create, Edit and Play Laserix LevelsLyric Syncer - Create and use Synchronised Lyrics.Connect 4 - 2 Player Connect 4 Game (Local or Online!, Formatted Chat!!)MD5, SHA-1, SHA-256, Tiger and Whirlpool Hash Finder - Dictionary and Brute Force FindCool Text Client - Create Rendered ImageMy UDF's:GUI Enhance - Enhance your GUIs visually.IDEA File Encryption - Encrypt and decrypt files easily! File Rename - Rename files easilyRC4 Text Encryption - Encrypt text using the RC4 AlgorithmPrime Number - Check if a number is primeString Remove - remove lots of strings at onceProgress Bar - made easySound UDF - Play, Pause, Resume, Seek and Stop.
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...