jennico Posted December 30, 2008 Share Posted December 30, 2008 and a word to TheSaint: i really dislike the way how he tries to hijack this thread. his proggy is completely different and moreover quite primitive and ugly.this is really bad behaviour !j. Spoiler I actively support Wikileaks | Freedom for Julian Assange ! | Defend freedom of speech ! | Fight censorship ! | I will not silence.Don't forget this IP: 213.251.145.96 Link to comment Share on other sites More sharing options...
TheSaint Posted December 30, 2008 Share Posted December 30, 2008 and a word to TheSaint: i really dislike the way how he tries to hijack this thread. his proggy is completely different and moreover quite primitive and ugly.this is really bad behaviour !j.You're entitled to your opinion of course, but it seems to me you've got a bee in your bonnet about me ... why I'm not sure ... maybe you just like to be a troublemaker? As you can see above, Volly didn't take exception to my program being mentioned, and even made nice comments about it. When the time was appropriate, I removed my screenshots from his post ... I didn't have to, but I thought it the right thing to do. If you've been using this forum for any time, you'll have noticed that others often list alternatives to programs on that program post. You'll have noticed maybe, that Valuater also mentioned his toolbar program. Both my program & Volly's are for SciTE, while my mine should also work with other Editors, etc. Both are toolbar programs, so I cannot see where you getoff calling them completely different? The only bad behaviour here, is your completely unjustified insinuations and insults! P.S. If you are really serious with your complaints, then address the issues I raise here and at TheSaint's Toolbox, where you made other ridiculous complaints. Make sure brain is in gear before opening mouth! Remember, what is not said, can be just as important as what is said. Spoiler What is the Secret Key? Life is like a Donut If I put effort into communication, I expect you to read properly & fully, or just not comment. Ignoring those who try to divert conversation with irrelevancies. If I'm intent on insulting you or being rude, I will be obvious, not ambiguous about it. I'm only big and bad, to those who have an over-active imagination. I may have the Artistic Liesense to disagree with you. TheSaint's Toolbox (be advised many downloads are not working due to ISP screwup with my storage) Link to comment Share on other sites More sharing options...
avery Posted February 5, 2009 Share Posted February 5, 2009 How do I get this to install. I copied the code by jennico which I should add was a total pain to copy.. CTRL+A doesn't work and the scrolling is glitched or something. I like the screen shots but where are the instructions please+thanks. avery *bang head here* www.abox.orgAvery HowellVisit My AutoIt Websitehttp://www.abox.org Link to comment Share on other sites More sharing options...
mdwerne Posted March 11, 2009 Share Posted March 11, 2009 How do I get this to install. I copied the code by jennico which I should add was a total pain to copy.. CTRL+A doesn't work and the scrolling is glitched or something.I like the screen shots but where are the instructions please+thanks.avery*bang head here*Check the first post... Link to comment Share on other sites More sharing options...
Capoeirista Posted August 16, 2014 Share Posted August 16, 2014 Error Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted August 16, 2014 Moderators Share Posted August 16, 2014 Capoeirista,Welcome to the AutoIt forum. The code is now over 5 years old - AutoIt has advanced enormously in this time and you cannot expect old code to run without problems in the current release. In this case, I presume that particular constant has now been added to one of the standard #include files - just comment out the offending line and the immediate problem should be solved. Although I fear you will find many other such conflicts given the changes in AutoIt syntax and functions to which I referred above. >M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
BrewManNH Posted August 16, 2014 Share Posted August 16, 2014 I modified this script a year or so ago, it can be found >here, it might still need some minor tweaking, but should be easier to work with. If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag GudeHow to ask questions the smart way! I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from. Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays. - ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script. - Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label. - _FileGetProperty - Retrieve the properties of a file - SciTE Toolbar - A toolbar demo for use with the SciTE editor - GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI. - Latin Square password generator Link to comment Share on other sites More sharing options...
kcvinu Posted August 7, 2015 Share Posted August 7, 2015 Hi, i have found this today. Interesting. I have changed my Run button with a new icon. Now i need to add a stop button. How to do it. If it was discribed in earlier comments, I will sure search for it. Spoiler My Contributions Glance GUI Library - A gui library based on Windows api functions. Written in Nim programming language. UDF Link Viewer --- A tool to visit the links of some most important UDFs Includer_2 ----- A tool to type the #include statement automatically Digits To Date ----- date from 3 integer values PrintList ----- prints arrays into console for testing. Alert ------ An alternative for MsgBox MousePosition ------- A simple tooltip display of mouse position GRM Helper -------- A littile tool to help writing code with GUIRegisterMsg function Access_UDF -------- An UDF for working with access database files. (.*accdb only) Link to comment Share on other sites More sharing options...
BrewManNH Posted August 8, 2015 Share Posted August 8, 2015 You would use $IDM_STOPEXECUTE as the variable needed to stop executing the script. $IDM_GO is what is used to run the script in the toolbar. kcvinu 1 If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag GudeHow to ask questions the smart way! I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from. Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays. - ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script. - Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label. - _FileGetProperty - Retrieve the properties of a file - SciTE Toolbar - A toolbar demo for use with the SciTE editor - GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI. - Latin Square password generator Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now