slightly_abnormal Posted May 2, 2006 Share Posted May 2, 2006 (edited) hi, how do i get this to display a message in the statusbar when i hover over a button? expandcollapse popup#include <GUIConstants.au3> $Form2 = GUICreate("Blash", 716, 561, 155, 134, BitOR($WS_MAXIMIZEBOX,$WS_SIZEBOX,$WS_THICKFRAME,$WS_OVERLAPPEDWINDOW,$WS_TILEDWINDOW,$WS_TABSTOP)) $status= GUICtrlCreateLabel("Welcome to Blash", 24, 528, 651, 17) $Button1 = GUICtrlCreateButton("Notepad", 48, 88, 89, 41) $Button2 = GUICtrlCreateButton("MSpaint", 152, 88, 89, 41) $Button3 = GUICtrlCreateButton("Regedit", 256, 88, 89, 41) $Button4 = GUICtrlCreateButton("The Gimp", 360, 88, 89, 41) $Button5 = GUICtrlCreateButton("My Computer", 360, 152, 89, 41) $Button6 = GUICtrlCreateButton("AButton1", 464, 88, 89, 41) $Button7 = GUICtrlCreateButton("AButton1", 48, 152, 89, 41) $Button8 = GUICtrlCreateButton("AButton1", 152, 152, 89, 41) $Button9 = GUICtrlCreateButton("AButton1", 256, 152, 89, 41) $Button10 = GUICtrlCreateButton("AButton1", 464, 152, 89, 41) $Button11 = GUICtrlCreateButton("AButton1", 576, 88, 89, 41) $Button12 = GUICtrlCreateButton("AButton1", 576, 152, 89, 41) GUISetState(@SW_SHOW) While 1 $msg = GuiGetMsg() Select Case $msg = $GUI_EVENT_CLOSE ExitLoop Case $msg = $Button1 GUICtrlSetData($status,"Open Notepad, for text editing.") Case $msg = $Button2 GUICtrlSetData($status,"Open MSPaint, for basic photo editing.") Case $msg = $Button3 GUICtrlSetData($status,"Open Regedit, for regestry editing.") Case $msg = $Button4 GUICtrlSetData($status,"Open The Gimp, for Photo manipulation, and editing.") Case $msg = $Button5 GUICtrlSetData($status,"Open My Computer, for no particular reason.") Case $msg = $Button6 GUICtrlSetData($status,"Nothing yet") Case $msg = $Button7 GUICtrlSetData($status,"Nothing yet") Case $msg = $Button8 GUICtrlSetData($status,"Nothing yet") Case $msg = $Button9 GUICtrlSetData($status,"Nothing yet") Case $msg = $Button10 GUICtrlSetData($status,"Nothing yet") Case $msg = $Button11 GUICtrlSetData($status,"Nothing yet") Case $msg = $Button12 GUICtrlSetData($status,"Nothing yet") Case Else ;;;;;;; EndSelect WEnd Exit Edited May 2, 2006 by slightly_abnormal Link to comment Share on other sites More sharing options...
forever Posted May 2, 2006 Share Posted May 2, 2006 You could create a function that checks for the mousecords. Like _IsMouseIn(xLeft,yLeftTop,xRight,yRightBottom) That Funcs checks if x => xLeft, x <= xRight & y => yLeftTop & <= yLeftBottom then it could return 1/0 if thatds done just put some _IsMouseIN(cords) in a loop to check where the mouse is. Don't know if this is the fastest/best/or even a good solution, but atleast it is one. Link to comment Share on other sites More sharing options...
Moderators SmOke_N Posted May 2, 2006 Moderators Share Posted May 2, 2006 Here this seemed to work:expandcollapse popup#include <GUIConstants.au3> Global $Hovered = 0 Local $Focus[13], $Button[13] For $i = 1 To 12 $Focus[$i] = 'Button' & $i Next Local $SetStatus[13] = ['', "Open Notepad, for text editing.", "Open MSPaint, for basic photo editing.", "Open Regedit, for regestry editing.", _ "Open The Gimp, for Photo manipulation, and editing.", "Open My Computer, for no particular reason.", "Nothing yet", "Nothing yet", "Nothing yet", _ "Nothing yet", "Nothing yet", "Nothing yet", "Nothing yet"] $Form2 = GUICreate("Blash", 716, 561, 155, 134, BitOR($WS_MAXIMIZEBOX,$WS_SIZEBOX,$WS_THICKFRAME,$WS_OVERLAPPEDWINDOW,$WS_TILEDWINDOW,$WS_TABSTOP)) $status= GUICtrlCreateLabel("Welcome to Blash", 24, 528, 651, 17) $Button[1] = GUICtrlCreateButton("Notepad", 48, 88, 89, 41) $Button[2] = GUICtrlCreateButton("MSpaint", 152, 88, 89, 41) $Button[3] = GUICtrlCreateButton("Regedit", 256, 88, 89, 41) $Button[4] = GUICtrlCreateButton("The Gimp", 360, 88, 89, 41) $Button[5] = GUICtrlCreateButton("My Computer", 360, 152, 89, 41) $Button[6] = GUICtrlCreateButton("AButton1", 464, 88, 89, 41) $Button[7] = GUICtrlCreateButton("AButton1", 48, 152, 89, 41) $Button[8] = GUICtrlCreateButton("AButton1", 152, 152, 89, 41) $Button[9] = GUICtrlCreateButton("AButton1", 256, 152, 89, 41) $Button[10] = GUICtrlCreateButton("AButton1", 464, 152, 89, 41) $Button[11] = GUICtrlCreateButton("AButton1", 576, 88, 89, 41) $Button[12] = GUICtrlCreateButton("AButton1", 576, 152, 89, 41) GUISetState(@SW_SHOW) While 1 $msg = GuiGetMsg() _ChangeStatus($Form2, $Button, $Focus, $status, $SetStatus) Select Case $msg = $GUI_EVENT_CLOSE ExitLoop Case $msg = $Button[1] Case $msg = $Button[2] Case $msg = $Button[3] Case $msg = $Button[4] Case $msg = $Button[5] Case $msg = $Button[6] Case $msg = $Button[7] Case $msg = $Button[8] Case $msg = $Button[9] Case $msg = $Button[10] Case $msg = $Button[11] Case $msg = $Button[12] Case Else ;;;;;;; EndSelect WEnd Exit Func _ChangeStatus($Hwnd_GUI, $Hwnd_CTRLID, $v_ClassNameNN, $Hwnd_StatusID, $v_SetStatus) $OptMCoord = Opt('MouseCoordMode', 2) Local $Mpos = MouseGetPos() For $x = 1 To 12 $Cpos = ControlGetPos($Hwnd_GUI, '',$Hwnd_CTRLID[$x]) If $Mpos[0] >= $Cpos[0] And $Mpos[0] <= $Cpos[0] + $Cpos[2] And $Mpos[1] >= $Cpos[1] And $Mpos[1] <= $Cpos[1] + $Cpos[3] And $Hovered <> $x Then ControlFocus($Hwnd_GUI, '', $v_ClassNameNN[$x]) GUICtrlSetData($Hwnd_StatusID, $v_SetStatus[$x]) $Hovered = $x Opt('MouseCoordMode', $OptMCoord) Return 1 EndIf Next Opt('MouseCoordMode', $OptMCoord) Return 0 EndFunc Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer. Link to comment Share on other sites More sharing options...
slightly_abnormal Posted May 2, 2006 Author Share Posted May 2, 2006 thanks smoken!!.. been trying to get it to reset back to to the default message "Welcome to Blash" when the buttons aren't hovered.. so far it just blinks the message now.. expandcollapse popup#include <GUIConstants.au3> Global $Hovered = 0 Local $Focus[13], $Button[13] For $i = 1 To 12 $Focus[$i] = 'Button' & $i Next Local $SetStatus[13] = ['', "Open Notepad, for text editing.", "Open MSPaint, for basic photo editing.", "Open Regedit, for regestry editing.", _ "Open The Gimp, for Photo manipulation, and editing.", "Open My Computer, for no particular reason.", "Nothing yet", "Nothing yet", "Nothing yet", _ "Nothing yet", "Nothing yet", "Nothing yet", "Nothing yet"] $Form2 = GUICreate("Blash", 716, 561, 155, 134, BitOR($WS_MAXIMIZEBOX,$WS_SIZEBOX,$WS_THICKFRAME,$WS_OVERLAPPEDWINDOW,$WS_TILEDWINDOW,$WS_TABSTOP)) $status= GUICtrlCreateLabel("Welcome to Blash", 24, 528, 651, 17) $Button[1] = GUICtrlCreateButton("Notepad", 48, 88, 89, 41) $Button[2] = GUICtrlCreateButton("MSpaint", 152, 88, 89, 41) $Button[3] = GUICtrlCreateButton("Regedit", 256, 88, 89, 41) $Button[4] = GUICtrlCreateButton("The Gimp", 360, 88, 89, 41) $Button[5] = GUICtrlCreateButton("My Computer", 360, 152, 89, 41) $Button[6] = GUICtrlCreateButton("AButton1", 464, 88, 89, 41) $Button[7] = GUICtrlCreateButton("AButton1", 48, 152, 89, 41) $Button[8] = GUICtrlCreateButton("AButton1", 152, 152, 89, 41) $Button[9] = GUICtrlCreateButton("AButton1", 256, 152, 89, 41) $Button[10] = GUICtrlCreateButton("AButton1", 464, 152, 89, 41) $Button[11] = GUICtrlCreateButton("AButton1", 576, 88, 89, 41) $Button[12] = GUICtrlCreateButton("AButton1", 576, 152, 89, 41) GUISetState(@SW_SHOW) While 1 $msg = GuiGetMsg() _ChangeStatus($Form2, $Button, $Focus, $status, $SetStatus) Select Case $msg = $GUI_EVENT_CLOSE ExitLoop Case $msg = $Button[1] Case $msg = $Button[2] Case $msg = $Button[3] Case $msg = $Button[4] Case $msg = $Button[5] Case $msg = $Button[6] Case $msg = $Button[7] Case $msg = $Button[8] Case $msg = $Button[9] Case $msg = $Button[10] Case $msg = $Button[11] Case $msg = $Button[12] Case Else ;;;;;;; EndSelect WEnd Exit Func _ChangeStatus($Hwnd_GUI, $Hwnd_CTRLID, $v_ClassNameNN, $Hwnd_StatusID, $v_SetStatus) $OptMCoord = Opt('MouseCoordMode', 2) Local $Mpos = MouseGetPos() For $x = 1 To 12 $Cpos = ControlGetPos($Hwnd_GUI, '',$Hwnd_CTRLID[$x]) If $Mpos[0] >= $Cpos[0] And $Mpos[0] <= $Cpos[0] + $Cpos[2] And $Mpos[1] >= $Cpos[1] And $Mpos[1] <= $Cpos[1] + $Cpos[3] And $Hovered <> $x Then ControlFocus($Hwnd_GUI, '', $v_ClassNameNN[$x]) GUICtrlSetData($Hwnd_StatusID, $v_SetStatus[$x]) $Hovered = $x Opt('MouseCoordMode', $OptMCoord) Return 1 Else;<--- added to reset when no button is hovered GUICtrlSetData($status,"Welcome to Blash");<--- EndIf Next Opt('MouseCoordMode', $OptMCoord) Return 0 EndFunc Link to comment Share on other sites More sharing options...
Moderators SmOke_N Posted May 2, 2006 Moderators Share Posted May 2, 2006 I guess you could store all the x and y positions of the controls ahead of time if you are not going to change positions of them, and then you could do another true if statement. The reason it keeps flashing, is it's going through 12 loops, and it's changing at least 11 times each loop it takes in that function. Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer. Link to comment Share on other sites More sharing options...
Valuater Posted May 2, 2006 Share Posted May 2, 2006 maybe button #1 and #2 only... you can finish it expandcollapse popup#include <GUIConstants.au3> HotkeySet("{Esc}", "GetPos"); use to get control info ************************** Global $Hovered = 0 Local $Focus[13], $Button[13] For $i = 1 To 12 $Focus[$i] = 'Button' & $i Next Local $SetStatus[13] = ['', "Open Notepad, for text editing.", "Open MSPaint, for basic photo editing.", "Open Regedit, for regestry editing.", _ "Open The Gimp, for Photo manipulation, and editing.", "Open My Computer, for no particular reason.", "Nothing yet", "Nothing yet", "Nothing yet", _ "Nothing yet", "Nothing yet", "Nothing yet", "Nothing yet"] $Form2 = GUICreate("Blash", 716, 561, 155, 134, BitOR($WS_MAXIMIZEBOX,$WS_SIZEBOX,$WS_THICKFRAME,$WS_OVERLAPPEDWINDOW,$WS_TILEDWINDOW,$WS_TABSTOP)) $status= GUICtrlCreateLabel("Welcome to Blash", 24, 528, 651, 17, $SS_SUNKEN + $SS_CENTER) $Button[1] = GUICtrlCreateButton("Notepad", 48, 88, 89, 41) $Button[2] = GUICtrlCreateButton("MSpaint", 152, 88, 89, 41) $Button[3] = GUICtrlCreateButton("Regedit", 256, 88, 89, 41) $Button[4] = GUICtrlCreateButton("The Gimp", 360, 88, 89, 41) $Button[5] = GUICtrlCreateButton("My Computer", 360, 152, 89, 41) $Button[6] = GUICtrlCreateButton("AButton1", 464, 88, 89, 41) $Button[7] = GUICtrlCreateButton("AButton1", 48, 152, 89, 41) $Button[8] = GUICtrlCreateButton("AButton1", 152, 152, 89, 41) $Button[9] = GUICtrlCreateButton("AButton1", 256, 152, 89, 41) $Button[10] = GUICtrlCreateButton("AButton1", 464, 152, 89, 41) $Button[11] = GUICtrlCreateButton("AButton1", 576, 88, 89, 41) $Button[12] = GUICtrlCreateButton("AButton1", 576, 152, 89, 41) GUISetState(@SW_SHOW) While 1 $msg = GuiGetMsg() ; _ChangeStatus($Form2, $Button, $Focus, $status, $SetStatus) Select Case $msg = $GUI_EVENT_CLOSE ExitLoop Case $msg = $Button[1] Case $msg = $Button[2] Case $msg = $Button[3] Case $msg = $Button[4] Case $msg = $Button[5] Case $msg = $Button[6] Case $msg = $Button[7] Case $msg = $Button[8] Case $msg = $Button[9] Case $msg = $Button[10] Case $msg = $Button[11] Case $msg = $Button[12] Case Else ;;;;;;; EndSelect $pos = "" $pos=GUIGetCursorInfo() If $pos[4] = 4 Then GUICtrlSetData($status, "This labe info #1") Do $msg1 = GUIGetMsg() If $msg1 = $Button[1] Then MsgBox(64, " Item Found"," Item #1 - Program will now Run "); call the function $pos1=GUIGetCursorInfo() Sleep(10) Until $pos1[4] <> 4 GUICtrlSetData($status, "Welcome to Blash") EndIf If $pos[4] = 5 Then GUICtrlSetData($status, "This labe info #2") Do $msg1 = GUIGetMsg() If $msg1 = $Button[2] Then MsgBox(64, " Item Found"," Item #2 - Program will now Run "); call the function $pos1=GUIGetCursorInfo() Sleep(10) Until $pos1[4] <> 5 GUICtrlSetData($status, "Welcome to Blash") EndIf WEnd Func GetPos() $a=GUIGetCursorInfo() MsgBox(0,"","left = " & $a[0] & @CRLF & "top = " & $a[1] & @CRLF & " control = " & $a[4]) EndFunc 8) Link to comment Share on other sites More sharing options...
Moderators SmOke_N Posted May 3, 2006 Moderators Share Posted May 3, 2006 I forgot about this post after I went out last night, just messed with it a bit, this should work:expandcollapse popup#include <GUIConstants.au3> Global $Hovered = 0 Local $Focus[13], $Button[13] For $i = 1 To 12 $Focus[$i] = 'Button' & $i Next Local $SetStatus[13] = ['', "Open Notepad, for text editing.", "Open MSPaint, for basic photo editing.", "Open Regedit, for regestry editing.", _ "Open The Gimp, for Photo manipulation, and editing.", "Open My Computer, for no particular reason.", "Nothing yet", "Nothing yet", "Nothing yet", _ "Nothing yet", "Nothing yet", "Nothing yet", "Nothing yet"] $Form2 = GUICreate("Blash", 716, 561, 155, 134, BitOR($WS_MAXIMIZEBOX,$WS_SIZEBOX,$WS_THICKFRAME,$WS_OVERLAPPEDWINDOW,$WS_TILEDWINDOW,$WS_TABSTOP)) $status= GUICtrlCreateLabel("Welcome to Blash", 24, 528, 651, 17) $Button[1] = GUICtrlCreateButton("Notepad", 48, 88, 89, 41) $Button[2] = GUICtrlCreateButton("MSpaint", 152, 88, 89, 41) $Button[3] = GUICtrlCreateButton("Regedit", 256, 88, 89, 41) $Button[4] = GUICtrlCreateButton("The Gimp", 360, 88, 89, 41) $Button[5] = GUICtrlCreateButton("My Computer", 360, 152, 89, 41) $Button[6] = GUICtrlCreateButton("AButton1", 464, 88, 89, 41) $Button[7] = GUICtrlCreateButton("AButton1", 48, 152, 89, 41) $Button[8] = GUICtrlCreateButton("AButton1", 152, 152, 89, 41) $Button[9] = GUICtrlCreateButton("AButton1", 256, 152, 89, 41) $Button[10] = GUICtrlCreateButton("AButton1", 464, 152, 89, 41) $Button[11] = GUICtrlCreateButton("AButton1", 576, 88, 89, 41) $Button[12] = GUICtrlCreateButton("AButton1", 576, 152, 89, 41) GUISetState(@SW_SHOW) While 1 $msg = GuiGetMsg() _ChangeStatus($Form2, $Button, $Focus, $status, $SetStatus) Select Case $msg = $GUI_EVENT_CLOSE ExitLoop Case $msg = $Button[1] Case $msg = $Button[2] Case $msg = $Button[3] Case $msg = $Button[4] Case $msg = $Button[5] Case $msg = $Button[6] Case $msg = $Button[7] Case $msg = $Button[8] Case $msg = $Button[9] Case $msg = $Button[10] Case $msg = $Button[11] Case $msg = $Button[12] Case Else ;;;;;;; EndSelect WEnd Exit Func _ChangeStatus($Hwnd_GUI, $Hwnd_CTRLID, $v_ClassNameNN, $Hwnd_StatusID, $v_SetStatus) $OptMCoord = Opt('MouseCoordMode', 2) Local $Mpos = MouseGetPos(), $True = 0 For $x = 1 To 12 $Cpos = ControlGetPos($Hwnd_GUI, '',$Hwnd_CTRLID[$x]) If IsArray($Cpos) And IsArray($Mpos) Then If $Mpos[0] >= $Cpos[0] And $Mpos[0] <= $Cpos[0] + $Cpos[2] And $Mpos[1] >= $Cpos[1] And $Mpos[1] <= $Cpos[1] + $Cpos[3] And $Hovered <> $x Then ControlFocus($Hwnd_GUI, '', $v_ClassNameNN[$x]) GUICtrlSetData($Hwnd_StatusID, $v_SetStatus[$x]) $Hovered = $x $True = 1 Opt('MouseCoordMode', $OptMCoord) Return 1 EndIf EndIf Next If $True = 0 Then $Cpos2 = ControlGetPos($Hwnd_GUI, '', $Hwnd_CTRLID[$Hovered]) If IsArray($Cpos2) And IsArray($Mpos) Then If $Mpos[0] < $Cpos2[0] Or $Mpos[0] > $Cpos2[0] + $Cpos2[2] Or $Mpos[1] < $Cpos2[1] Or $Mpos[1] > $Cpos2[1] + $Cpos2[3] Then If GUICtrlRead($status) <> "Welcome to Blash" Then GUICtrlSetData($status, "Welcome to Blash") $Hovered = 0 EndIf EndIf EndIf EndIf Opt('MouseCoordMode', $OptMCoord) Return 0 EndFunc Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer. Link to comment Share on other sites More sharing options...
Valuater Posted May 3, 2006 Share Posted May 3, 2006 i actually used that script i wrote to show a picture on a mouse-overhttp://www.autoitscript.com/forum/index.ph...4&hl=wow++menu#8) Link to comment Share on other sites More sharing options...
GaryFrost Posted May 3, 2006 Share Posted May 3, 2006 (edited) requires beta, minimum OS Win XP expandcollapse popup#include <GUIConstants.au3> Opt("MustDeclareVars", 1) Global Const $DebugIt = 1 Global Const $WM_NOTIFY = 0x004E Global Const $BCN_HOTITEMCHANGE = -1249 Global $Hovered = 0 Global $Button[13][2], $status _Main() Func _Main() Local $x = 48, $y = 88, $msg, $Form2 Local $SetStatus[13] = [12, "Open Notepad, for text editing.", "Open MSPaint, for basic photo editing.", "Open Regedit, for regestry editing.", _ "Open The Gimp, for Photo manipulation, and editing.", "Open My Computer, for no particular reason.", "Nothing yet", "Nothing yet", "Nothing yet", _ "Nothing yet", "Nothing yet", "Nothing yet", "Nothing yet"] Local $Btn_Text[13] = [12, "Notepad", "MSpaint", "Regedit", "The Gimp", "My Computer", _ "AButton1", "AButton1", "AButton1", "AButton1", "AButton1", "AButton1", "AButton1"] $Form2 = GUICreate("Blash", 716, 561, 155, 134, BitOR($WS_MAXIMIZEBOX, $WS_SIZEBOX, $WS_THICKFRAME, $WS_OVERLAPPEDWINDOW, $WS_TILEDWINDOW, $WS_TABSTOP)) $status = GUICtrlCreateLabel("Welcome to Blash", 24, 528, 651, 17) $Button[0][0] = 12 For $i = 1 To 6 $Button[$i][0] = GUICtrlCreateButton($Btn_Text[$i], $x, $y, 89, 41) $Button[$i][1] = $SetStatus[$i] $Button[$i + 6][0] = GUICtrlCreateButton($Btn_Text[$i + 6], $x, $y + 64, 89, 41) $Button[$i + 6][1] = $SetStatus[$i+6] $x += 104 Next ;Register WM_NOTIFY events GUIRegisterMsg($WM_NOTIFY, "WM_Notify_Events") GUISetState(@SW_SHOW) While 1 $msg = GUIGetMsg() Select Case $msg = $GUI_EVENT_CLOSE ExitLoop Case Else For $x = 1 To $Button[0][0] If $msg = $Button[$x][0] Then ; do something, could be another array ExitLoop EndIf Next EndSelect WEnd EndFunc ;==>_Main ; WM_NOTIFY event handler Func WM_Notify_Events($hWndGUI, $MsgID, $wParam, $lParam) #forceref $hWndGUI, $MsgID, $wParam Local Const $HICF_ENTERING = 0x10 Local Const $HICF_LEAVING = 0x20 Local $tagNMBCHOTITEM, $event, $hwndFrom, $code, $dwFlags, $i $tagNMBCHOTITEM = DllStructCreate("int;int;int;dword", $lParam) $hwndFrom = DllStructGetData($tagNMBCHOTITEM, 1) $code = DllStructGetData($tagNMBCHOTITEM, 3) $dwFlags = DllStructGetData($tagNMBCHOTITEM, 4) Select Case $code = $BCN_HOTITEMCHANGE ;---------------------------------------------------------------------------------------------- If $DebugIt Then ConsoleWrite (_DebugHeader("$BCN_HOTITEMCHANGE")) ;---------------------------------------------------------------------------------------------- If BitAND($dwFlags, $HICF_LEAVING) = $HICF_LEAVING Then ;---------------------------------------------------------------------------------------------- If $DebugIt Then ConsoleWrite (_DebugHeader("Leaving Button Area")) ;---------------------------------------------------------------------------------------------- GUICtrlSetData($status, "Welcome to Blash") ElseIf BitAND($dwFlags, $HICF_ENTERING) = $HICF_ENTERING Then ;---------------------------------------------------------------------------------------------- If $DebugIt Then ConsoleWrite (_DebugHeader("Entering Button Area")) ;---------------------------------------------------------------------------------------------- For $i = 1 To $Button[0][0] If $hwndFrom = ControlGetHandle($hWndGUI, "", $Button[$i][0]) Then GUICtrlSetData($status, $Button[$i][1]) ExitLoop EndIf Next EndIf EndSelect $tagNMBCHOTITEM = 0 $event = 0 $lParam = 0 EndFunc ;==>WM_Notify_Events Func _DebugHeader($s_text) Return _ "!===========================================================" & @LF & _ "+===========================================================" & @LF & _ "-->" & $s_text & @LF & _ "+===========================================================" & @LF EndFunc ;==>_DebugHeader Edited May 4, 2006 by gafrost SciTE for AutoItDirections for Submitting Standard UDFs  Don't argue with an idiot; people watching may not be able to tell the difference.  Link to comment Share on other sites More sharing options...
Valuater Posted May 3, 2006 Share Posted May 3, 2006 they all work great.. lots of choices gary, i noticed yours didn't return status to "Welcome to Blash" 8) Link to comment Share on other sites More sharing options...
GaryFrost Posted May 3, 2006 Share Posted May 3, 2006 they all work great.. lots of choicesgary, i noticed yours didn't return status to "Welcome to Blash"8)Does now... SciTE for AutoItDirections for Submitting Standard UDFs  Don't argue with an idiot; people watching may not be able to tell the difference.  Link to comment Share on other sites More sharing options...
Moderators SmOke_N Posted May 4, 2006 Moderators Share Posted May 4, 2006 If the Minimum PC is XP then this option given by Gary is MUUUUUUUUUCH nicer then what I did... For 1, it doesn't matter if the script is tied up doing something else, I put Sleep(20000) in mine under GUIGetMsg(), and it had to wait for the sleep to be over to change, put it in to change, with Gary's it doesn't. This to me is much more efficient, as your probably doing other things (I always do) that you can't break away from, almost seems like multithreading Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now