mattw112 Posted May 27, 2006 Share Posted May 27, 2006 Hi, I'm having problems getting this to work. I'm pretty new to this as well. I've seen the simple examples in the help and in a few other places as well, but what I want to do is a whole script full of stuff, but just have this running in case somethign pops up. It seems like when I try it though it doesn't do my script of stuff and just waits for this guy? I don't have the specific code, but high level I was trying this: Run a setup program AdlibEnable("myadlib1") Code for dialogs to watch for for the install program myadlib1 watch for other stuff, close if they show up) Exit Any suggestions or places I should go look at examples? Thanks, Terry Link to comment Share on other sites More sharing options...
MFerris Posted May 27, 2006 Share Posted May 27, 2006 According to the documentation for Adlibenable, your main script is paused when this is running. Also, Adlibenable should be very short and not run too frequently, otherwise your main script will continue to be paused every time Adlibenable launches your function. So, by your example above, every 250 milliseconds (default time for AdlibEnable), your main scripting is being paused while 'myadlib1' runs - when it completes, your main script resumes only to be paused another 250 milliseconds later. Link to comment Share on other sites More sharing options...
herewasplato Posted May 29, 2006 Share Posted May 29, 2006 myadlib1watch for other stuff, close if they show up)ExitIt would help if you posted all of your code or at least all of the adlib code. Did you happen to use a WinWait in your adlib? You might want If WinExists... then do something [size="1"][font="Arial"].[u].[/u][/font][/size] Link to comment Share on other sites More sharing options...
mattw112 Posted May 29, 2006 Author Share Posted May 29, 2006 It would help if you posted all of your code or at least all of the adlib code. Did you happen to use a WinWait in your adlib? You might want If WinExists... then do somethingBelow is what I was trying...AutoItSetOption ( "TrayIconDebug", 1)Opt ( "WinTitleMatchMode", 2 )Opt ( "WinTextMatchMode", 2 )Run ("rundll32 C:\PROGRA~1\Novell\NOVELL~1\nippppi.dll,iPrintAdminRightsCheck", "", @SW_MAXIMIZE)AdlibEnable("myadlib1")Sleep (2000)WinWait ("iPrint", "This will remove iPrint from your computer. Do you wish to proceed?", 600)WinActivate ("iPrint", "This will remove iPrint from your computer. Do you wish to proceed?")Sleep (500)Send ("{TAB}")Send ("{ENTER}")WinWait ("iPrint", "iPrint has been successfully uninstalled from your machine.", 600)WinActivate ("iPrint", "iPrint has been successfully uninstalled from your machine.")Sleep (500)Send ("{ENTER}")Func myadlib1() If WinWait("Novell iPrint Uninstall", "The system cannot find the file specified.", ) Then WinActivate("Novell iPrint Uninstall", "The system cannot find the file specified.", ) WinWaitActive("Novell iPrint Uninstall", "The system cannot find the file specified.", ) Sleep (500) Send("{ENTER}") Exit EndIfEndFuncExitAdlibEnable("myadlib2")Func myadlib2() If WinWait("RUNDLL", "Error loading C:\PROGRA~1\Novell\NOVELL~1\nippppi.dll", ) Then WinActivate("RUNDLL", "Error loading C:\PROGRA~1\Novell\NOVELL~1\nippppi.dll", ) WinWaitActive("RUNDLL", "Error loading C:\PROGRA~1\Novell\NOVELL~1\nippppi.dll", ) Sleep (500) Send("{ENTER}") Exit EndIfEndFuncExit Link to comment Share on other sites More sharing options...
mattw112 Posted May 29, 2006 Author Share Posted May 29, 2006 Below is what I was trying...AutoItSetOption ( "TrayIconDebug", 1)Opt ( "WinTitleMatchMode", 2 )Opt ( "WinTextMatchMode", 2 )Run ("rundll32 C:\PROGRA~1\Novell\NOVELL~1\nippppi.dll,iPrintAdminRightsCheck", "", @SW_MAXIMIZE)AdlibEnable("myadlib1")Sleep (2000)WinWait ("iPrint", "This will remove iPrint from your computer. Do you wish to proceed?", 600)WinActivate ("iPrint", "This will remove iPrint from your computer. Do you wish to proceed?")Sleep (500)Send ("{TAB}")Send ("{ENTER}")WinWait ("iPrint", "iPrint has been successfully uninstalled from your machine.", 600)WinActivate ("iPrint", "iPrint has been successfully uninstalled from your machine.")Sleep (500)Send ("{ENTER}")Func myadlib1() If WinWait("Novell iPrint Uninstall", "The system cannot find the file specified.", ) Then WinActivate("Novell iPrint Uninstall", "The system cannot find the file specified.", ) WinWaitActive("Novell iPrint Uninstall", "The system cannot find the file specified.", ) Sleep (500) Send("{ENTER}") Exit EndIfEndFuncExitAdlibEnable("myadlib2")Func myadlib2() If WinWait("RUNDLL", "Error loading C:\PROGRA~1\Novell\NOVELL~1\nippppi.dll", ) Then WinActivate("RUNDLL", "Error loading C:\PROGRA~1\Novell\NOVELL~1\nippppi.dll", ) WinWaitActive("RUNDLL", "Error loading C:\PROGRA~1\Novell\NOVELL~1\nippppi.dll", ) Sleep (500) Send("{ENTER}") Exit EndIfEndFuncExitI see what you mean about if winexists... I'll add that instead...Thanks,Terry Link to comment Share on other sites More sharing options...
MHz Posted May 30, 2006 Share Posted May 30, 2006 I see a layout issue with your code. As I can only guess of how the windows are showing and the errors appearing, then this is perhaps my best guess. Normally only 1 Adlib function is enough. expandcollapse popupOpt("TrayIconDebug", 1) Opt("WinTitleMatchMode", 2) Opt("WinTextMatchMode", 2) Run("rundll32 C:\PROGRA~1\Novell\NOVELL~1\nippppi.dll,iPrintAdminRightsCheck", "", @SW_MAXIMIZE) AdlibEnable("myadlib") Sleep(2000) If WinWait("iPrint", "This will remove iPrint from your computer. Do you wish to proceed?", 600) Then WinActivate("iPrint", "This will remove iPrint from your computer. Do you wish to proceed?") Sleep(500) Send("{TAB}") Send("{ENTER}") If WinWait("iPrint", "iPrint has been successfully uninstalled from your machine.", 600) Then WinActivate("iPrint", "iPrint has been successfully uninstalled from your machine.") Sleep(500) Send("{ENTER}") EndIf EndIf Exit Func myadlib() If WinExists("Novell iPrint Uninstall", "The system cannot find the file specified.") Then WinActivate("Novell iPrint Uninstall", "The system cannot find the file specified.") WinWaitActive("Novell iPrint Uninstall", "The system cannot find the file specified.") Sleep(500) Send("{ENTER}") Exit ElseIf WinExists("RUNDLL", "Error loading C:\PROGRA~1\Novell\NOVELL~1\nippppi.dll") Then WinActivate("RUNDLL", "Error loading C:\PROGRA~1\Novell\NOVELL~1\nippppi.dll") WinWaitActive("RUNDLL", "Error loading C:\PROGRA~1\Novell\NOVELL~1\nippppi.dll") Sleep(500) Send("{ENTER}") Exit EndIf EndFunc I removed the extra comma's in the function call of the adlib function. AutoIt does not accept empty parameters and since they are optional parameters, then just omit them. Link to comment Share on other sites More sharing options...
mattw112 Posted June 1, 2006 Author Share Posted June 1, 2006 (edited) I see a layout issue with your code. As I can only guess of how the windows are showing and the errors appearing, then this is perhaps my best guess. Normally only 1 Adlib function is enough. expandcollapse popupOpt("TrayIconDebug", 1) Opt("WinTitleMatchMode", 2) Opt("WinTextMatchMode", 2) Run("rundll32 C:\PROGRA~1\Novell\NOVELL~1\nippppi.dll,iPrintAdminRightsCheck", "", @SW_MAXIMIZE) AdlibEnable("myadlib") Sleep(2000) If WinWait("iPrint", "This will remove iPrint from your computer. Do you wish to proceed?", 600) Then WinActivate("iPrint", "This will remove iPrint from your computer. Do you wish to proceed?") Sleep(500) Send("{TAB}") Send("{ENTER}") If WinWait("iPrint", "iPrint has been successfully uninstalled from your machine.", 600) Then WinActivate("iPrint", "iPrint has been successfully uninstalled from your machine.") Sleep(500) Send("{ENTER}") EndIf EndIf Exit Func myadlib() If WinExists("Novell iPrint Uninstall", "The system cannot find the file specified.") Then WinActivate("Novell iPrint Uninstall", "The system cannot find the file specified.") WinWaitActive("Novell iPrint Uninstall", "The system cannot find the file specified.") Sleep(500) Send("{ENTER}") Exit ElseIf WinExists("RUNDLL", "Error loading C:\PROGRA~1\Novell\NOVELL~1\nippppi.dll") Then WinActivate("RUNDLL", "Error loading C:\PROGRA~1\Novell\NOVELL~1\nippppi.dll") WinWaitActive("RUNDLL", "Error loading C:\PROGRA~1\Novell\NOVELL~1\nippppi.dll") Sleep(500) Send("{ENTER}") Exit EndIf EndFunc I removed the extra comma's in the function call of the adlib function. AutoIt does not accept empty parameters and since they are optional parameters, then just omit them. Thanks I've used a lot of this, along with some suggestions from others to get what's shown below... AutoItSetOption("TrayIconDebug", 1) Opt("WinTitleMatchMode", 2 ) Opt("WinTextMatchMode", 2 ) Run ("rundll32 C:\PROGRA~1\Novell\NOVELL~1\nippppi.dll,iPrintAdminRightsCheck", "", @SW_MAXIMIZE) Sleep(15000) WinWait("iPrint", "This will remove iPrint from your computer. Do you wish to proceed?", 120) If WinExists("iPrint", "This will remove iPrint from your computer. Do you wish to proceed?") Then WinActivate ("iPrint", "This will remove iPrint from your computer. Do you wish to proceed?") Sleep(100) ControlFocus("iPrint", "This will remove iPrint from your computer. Do you wish to proceed?", 6) ControlClick("iPrint", "This will remove iPrint from your computer. Do you wish to proceed?", 6) Sleep (200) WinWait("iPrint", "iPrint has been successfully uninstalled from your machine.", 240) If WinExists("iPrint", "iPrint has been successfully uninstalled from your machine.") Then WinActivate ("iPrint", "iPrint has been successfully uninstalled from your machine.") Sleep(100) ControlFocus("iPrint", "iPrint has been successfully uninstalled from your machine.", 2) ControlClick("iPrint", "iPrint has been successfully uninstalled from your machine.", 2) Sleep(200) EndIf EndIf Exit You'll notice I took out the adlib stuff... instead in my other script I'm verifying those files exist first before launching this so that I don't get those errors. Terry Edited June 1, 2006 by mattw112 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now