polto Posted June 18, 2006 Share Posted June 18, 2006 I tried to download a script from this forum, to work whit Internet Explorer. I saw that I needed this include:http://www.autoitscript.com/forum/index.ph...25629&hl=ie.au3So I download it and saved (with the name IE.au3) it in the directory "Include".But when I try to start the script, it give me this error:Error reading the file: IE.au3I searched in forum but it seems nobody has had the same problem.Can someone help me? Link to comment Share on other sites More sharing options...
Moderators SmOke_N Posted June 18, 2006 Moderators Share Posted June 18, 2006 I tried to download a script from this forum, to work whit Internet Explorer. I saw that I needed this include:http://www.autoitscript.com/forum/index.ph...25629&hl=ie.au3So I download it and saved (with the name IE.au3) it in the directory "Include".But when I try to start the script, it give me this error:Error reading the file: IE.au3I searched in forum but it seems nobody has had the same problem.Can someone help me?Are you using Beta? Did you include it in the Beta Include Directory? Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer. Link to comment Share on other sites More sharing options...
polto Posted June 18, 2006 Author Share Posted June 18, 2006 Are you using Beta? Did you include it in the Beta Include Directory?I'm using Beta, but I included the file in the Include Directory, and not in Beta Include Directory...Now it works, many many thanks Link to comment Share on other sites More sharing options...
Moderators SmOke_N Posted June 18, 2006 Moderators Share Posted June 18, 2006 I'm using Beta, but I included the file in the Include Directory, and not in Beta Include Directory...Now it works, many many thanks Good deal, I've done that a time or 2 Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer. Link to comment Share on other sites More sharing options...
polto Posted June 18, 2006 Author Share Posted June 18, 2006 Good deal, I've done that a time or 2 I've another problem now..I was able (...) to write a script (with a little GUI) that read a web page, search a value and return me this value on a message box. What I can't do is: it's possible to make the scripts return me this value in a part of the GUI and not in a msgbox?PS: when the scripts finds the value, it save this value on a file; this is the part of code:FileWrite("C:\1\myfile.txt",$value )MsgBox(1, "word to search", $value) Link to comment Share on other sites More sharing options...
Moderators SmOke_N Posted June 18, 2006 Moderators Share Posted June 18, 2006 Well, I'm not a mind reader, have no idea what your GUI is (so the question is rather annoying really)... GUICtrlSetData() would be my answer then. Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer. Link to comment Share on other sites More sharing options...
polto Posted June 18, 2006 Author Share Posted June 18, 2006 (edited) Well, I'm not a mind reader, have no idea what your GUI is (so the question is rather annoying really)... GUICtrlSetData() would be my answer then. This is the code: expandcollapse popup#include <GuiConstants.au3> #include <Array.au3> #include <GuiListView.au3> #include <GuiTab.au3> ;GUI GuiCreate("Programma di borsa", 1000, 700,0, 0 , _ $WS_OVERLAPPEDWINDOW + $WS_VISIBLE + $WS_CLIPSIBLINGS ) GuiSetIcon(@SystemDir & "\notepad.exe", 0) $filemenu = GuiCtrlCreateMenu("File") $fileitem = GuiCtrlCreateMenuItem("Apri", $filemenu) $fileitem2 = GuiCtrlCreateMenuItem("Salva", $filemenu) $fileitem3 = GuiCtrlCreateMenuItem("Salva con nome", $filemenu) $fileitem4 = GuiCtrlCreateMenuItem("Chiudi", $filemenu) $fileitem5 = GuiCtrlCreateMenuItem("Esci", $filemenu) $modificamenu = GuiCtrlCreateMenu("Modifica") $modificaitem = GuiCtrlCreateMenuItem("Annulla", $modificamenu) $modificaitem2 = GuiCtrlCreateMenuItem("Taglia", $modificamenu) $modificaitem3 = GuiCtrlCreateMenuItem("Copia", $modificamenu) $modificaitem4 = GuiCtrlCreateMenuItem("Incolla", $modificamenu) $modificaitem5 = GuiCtrlCreateMenuItem("Seleziona tutto", $modificamenu) $button1 = GuiCtrlCreateButton("1", 0, 0, 40, 40, $BS_ICON) GuiCtrlSetImage (-1, "shell32.dll", 5) $button2 = GuiCtrlCreateButton("2", 0, 40, 40, 40, $BS_ICON) GuiCtrlSetImage (-1, "shell32.dll", 6) $button3 = GuiCtrlCreateButton("2", 0, 80, 40, 40, $BS_ICON) GuiCtrlSetImage (-1, "shell32.dll", 2) $button4 = GuiCtrlCreateButton("2", 0, 120, 40, 40, $BS_ICON) GuiCtrlSetImage (-1, "shell32.dll", 8) $button5 = GuiCtrlCreateButton("2", 0, 160, 40, 40, $BS_ICON) GuiCtrlSetImage (-1, "shell32.dll", 1) $button6 = GuiCtrlCreateButton("2", 0, 200, 40, 40, $BS_ICON) GuiCtrlSetImage (-1, "shell32.dll", 10) $button7 = GuiCtrlCreateButton("2", 0, 240, 40, 40, $BS_ICON) GuiCtrlSetImage (-1, "shell32.dll", 11) $button8 = GuiCtrlCreateButton("2", 0, 280, 40, 40, $BS_ICON) GuiCtrlSetImage (-1, "shell32.dll", 8) $button9 = GuiCtrlCreateButton("2", 0, 320, 40, 40, $BS_ICON) GuiCtrlSetImage (-1, "shell32.dll", 2) $button10 = GuiCtrlCreateButton("2", 0, 360, 40, 40, $BS_ICON) GuiCtrlSetImage (-1, "shell32.dll", 14) GUICtrlCreateLabel("", 41, 0, 960, 700) GUICtrlSetBkColor(-1, 0x000000) GuiSetState() While GuiGetMsg() $msg=GuiGetMsg() Select Case $msg = $GUI_EVENT_CLOSE or $msg = $fileitem5 ExitLoop Case $msg = $fileitem FileOpenDialog("Apri file", @DesktopDir, "All (*.*)") Case $msg = $button1 $file2 = FileOpenDialog("Apri file", @DesktopDir, "All (*.*)") EndSelect Wend If FileExists("C:\prova\") Then filedelete("C:\prova\*.txt") Real() Else filedelete("C:\prova\*.txt") Real() EndIf Func Real() InetGet ( "http://www.borsaitalia.it/bitApp/scheda.bit?target=IndexDetail&isin=IS945&lang=it", "c:\prova\pagina.txt", 1) $fil = FileRead("C:\prova\pagina.txt", 100000) $cerca = StringInStr ( $fil, "Ultimo Valore:") $parti = StringMid ( $fil, $cerca, 42); $valore = StringMid($parti, 31, 6) FileWrite("C:\prova\ultimo.txt",$valore ) MsgBox(1, "Ultimo prezzo", $valore) filedelete("C:\prova\pagina.txt") EndFunc Exit ; GUI MESSAGE LOOP GuiSetState() While GuiGetMsg() <> $GUI_EVENT_CLOSE WEnd Edited June 18, 2006 by polto Link to comment Share on other sites More sharing options...
Moderators SmOke_N Posted June 18, 2006 Moderators Share Posted June 18, 2006 This is the code: expandcollapse popup#include <GuiConstants.au3> #include <Array.au3> #include <GuiListView.au3> #include <GuiTab.au3> ;GUI GuiCreate("Programma di borsa", 1000, 700,0, 0 , _ $WS_OVERLAPPEDWINDOW + $WS_VISIBLE + $WS_CLIPSIBLINGS ) GuiSetIcon(@SystemDir & "\notepad.exe", 0) $filemenu = GuiCtrlCreateMenu("File") $fileitem = GuiCtrlCreateMenuItem("Apri", $filemenu) $fileitem2 = GuiCtrlCreateMenuItem("Salva", $filemenu) $fileitem3 = GuiCtrlCreateMenuItem("Salva con nome", $filemenu) $fileitem4 = GuiCtrlCreateMenuItem("Chiudi", $filemenu) $fileitem5 = GuiCtrlCreateMenuItem("Esci", $filemenu) $modificamenu = GuiCtrlCreateMenu("Modifica") $modificaitem = GuiCtrlCreateMenuItem("Annulla", $modificamenu) $modificaitem2 = GuiCtrlCreateMenuItem("Taglia", $modificamenu) $modificaitem3 = GuiCtrlCreateMenuItem("Copia", $modificamenu) $modificaitem4 = GuiCtrlCreateMenuItem("Incolla", $modificamenu) $modificaitem5 = GuiCtrlCreateMenuItem("Seleziona tutto", $modificamenu) $button1 = GuiCtrlCreateButton("1", 0, 0, 40, 40, $BS_ICON) GuiCtrlSetImage (-1, "shell32.dll", 5) $button2 = GuiCtrlCreateButton("2", 0, 40, 40, 40, $BS_ICON) GuiCtrlSetImage (-1, "shell32.dll", 6) $button3 = GuiCtrlCreateButton("2", 0, 80, 40, 40, $BS_ICON) GuiCtrlSetImage (-1, "shell32.dll", 2) $button4 = GuiCtrlCreateButton("2", 0, 120, 40, 40, $BS_ICON) GuiCtrlSetImage (-1, "shell32.dll", 8) $button5 = GuiCtrlCreateButton("2", 0, 160, 40, 40, $BS_ICON) GuiCtrlSetImage (-1, "shell32.dll", 1) $button6 = GuiCtrlCreateButton("2", 0, 200, 40, 40, $BS_ICON) GuiCtrlSetImage (-1, "shell32.dll", 10) $button7 = GuiCtrlCreateButton("2", 0, 240, 40, 40, $BS_ICON) GuiCtrlSetImage (-1, "shell32.dll", 11) $button8 = GuiCtrlCreateButton("2", 0, 280, 40, 40, $BS_ICON) GuiCtrlSetImage (-1, "shell32.dll", 8) $button9 = GuiCtrlCreateButton("2", 0, 320, 40, 40, $BS_ICON) GuiCtrlSetImage (-1, "shell32.dll", 2) $button10 = GuiCtrlCreateButton("2", 0, 360, 40, 40, $BS_ICON) GuiCtrlSetImage (-1, "shell32.dll", 14) GUICtrlCreateLabel("", 41, 0, 960, 700) GUICtrlSetBkColor(-1, 0x000000) GuiSetState() While GuiGetMsg() $msg=GuiGetMsg() Select Case $msg = $GUI_EVENT_CLOSE or $msg = $fileitem5 ExitLoop Case $msg = $fileitem FileOpenDialog("Apri file", @DesktopDir, "All (*.*)") Case $msg = $button1 $file2 = FileOpenDialog("Apri file", @DesktopDir, "All (*.*)") EndSelect Wend If FileExists("C:\prova\") Then filedelete("C:\prova\*.txt") Real() Else filedelete("C:\prova\*.txt") Real() EndIf Func Real() InetGet ( "http://www.borsaitalia.it/bitApp/scheda.bit?target=IndexDetail&isin=IS945&lang=it", "c:\prova\pagina.txt", 1) $fil = FileRead("C:\prova\pagina.txt", 100000) $cerca = StringInStr ( $fil, "Ultimo Valore:") $parti = StringMid ( $fil, $cerca, 42); $valore = StringMid($parti, 31, 6) FileWrite("C:\prova\ultimo.txt",$valore ) MsgBox(1, "Ultimo prezzo", $valore) filedelete("C:\prova\pagina.txt") EndFunc Exit ; GUI MESSAGE LOOP GuiSetState() While GuiGetMsg() <> $GUI_EVENT_CLOSE WEnd See, that's much easier... 1. I only glanced but this stuck out:$fil = FileRead("C:\prova\pagina.txt", 100000)Since your using Beta you only need expandcollapse popup$fil = FileRead(@HomeDrive & "prova\pagina.txt")oÝ÷ Øëaz»aj{ajÒ+y©eʯzz"uæ°êÞÊ°j{m¢¶¬wè®fí«¢g¬{h¶Pë¢m7êö¥¢·¬ uæ§znµº1¶Êjw!jxj̨»¬l»-²Özg§¶+0«HßÙ ¢)àÂ+aêÞB¶¹RzÐÚµ¨ÊìاÚ&jGB"Ë^iÚÈ£az|¨ºwvÚæy©è¶«B"«¥êÚµçîËb¢yb쨺¯y©Ýq©eا¦Vz̲hÅ«¢+Ø¥¹±Õ±ÐíÕ¥ ½¹ÍѹÑ̹ÔÌÐì(¥¹±Õ±ÐíÉÉä¹ÔÌÐì(¥¹±Õ±ÐíÕ¥1¥ÍÑY¥Ü¹ÔÌÐì(¥¹±Õ±ÐíÕ¥Q¹ÔÌÐì((íU$)Õ¥ ÉÑ ÅÕ½ÐíAɽɵµ¤½ÉÍÅÕ½Ðì°ÄÀÀÀ°ÜÀÀ°À°À°|(ÀÌØí]M}=YI1AA]%9=¬ÀÌØí]M}Y%M% 1¬ÀÌØí]M} 1%AM% 1%9L¤)Õ¥MÑ%½¸¡MåÍѵ¥ÈµÀìÅÕ½ÐìÀäÈí¹½ÑÁ¹áÅÕ½Ðì°À¤((ÀÌØí¥±µ¹ÔôÕ¥ Ñɱ ÉÑ5¹Ô ÅÕ½Ðí¥±ÅÕ½Ðì¤(ÀÌØí¥±¥Ñ´ôÕ¥ Ñɱ ÉÑ5¹Õ%Ñ´ ÅÕ½ÐíÁɤÅÕ½Ðì°ÀÌØí¥±µ¹Ô¤(ÀÌØí¥±¥Ñ´ÈôÕ¥ Ñɱ ÉÑ5¹Õ%Ñ´ ÅÕ½ÐíM±ÙÅÕ½Ðì°ÀÌØí¥±µ¹Ô¤(ÀÌØí¥±¥Ñ´ÌôÕ¥ Ñɱ ÉÑ5¹Õ%Ñ´ ÅÕ½ÐíM±Ù½¸¹½µÅÕ½Ðì°ÀÌØí¥±µ¹Ô¤(ÀÌØí¥±¥Ñ´ÐôÕ¥ Ñɱ ÉÑ5¹Õ%Ñ´ ÅÕ½Ðí ¡¥Õ¤ÅÕ½Ðì°ÀÌØí¥±µ¹Ô¤(ÀÌØí¥±¥Ñ´ÔôÕ¥ Ñɱ ÉÑ5¹Õ%Ñ´ ÅÕ½ÐíͤÅÕ½Ðì°ÀÌØí¥±µ¹Ô¤(ÀÌØíµ½¥¥µ¹ÔôÕ¥ Ñɱ ÉÑ5¹Ô ÅÕ½Ðí5½¥¥ÅÕ½Ðì¤(ÀÌØíµ½¥¥¥Ñ´ôÕ¥ Ñɱ ÉÑ5¹Õ%Ñ´ ÅÕ½Ðí¹¹Õ±±ÅÕ½Ðì°ÀÌØíµ½¥¥µ¹Ô¤(ÀÌØíµ½¥¥¥Ñ´ÈôÕ¥ Ñɱ ÉÑ5¹Õ%Ñ´ ÅÕ½ÐíQ±¥ÅÕ½Ðì°ÀÌØíµ½¥¥µ¹Ô¤(ÀÌØíµ½¥¥¥Ñ´ÌôÕ¥ Ñɱ ÉÑ5¹Õ%Ñ´ ÅÕ½Ðí ½Á¥ÅÕ½Ðì°ÀÌØíµ½¥¥µ¹Ô¤(ÀÌØíµ½¥¥¥Ñ´ÐôÕ¥ Ñɱ ÉÑ5¹Õ%Ñ´ ÅÕ½Ðí%¹½±±ÅÕ½Ðì°ÀÌØíµ½¥¥µ¹Ô¤(ÀÌØíµ½¥¥¥Ñ´ÔôÕ¥ Ñɱ ÉÑ5¹Õ%Ñ´ ÅÕ½ÐíM±é¥½¹ÑÕÑѼÅÕ½Ðì°ÀÌØíµ½¥¥µ¹Ô¤((ÀÌØíÕÑѽ¸ÄôÕ¥ Ñɱ ÉÑ ÕÑѽ¸ ÅÕ½ÐìÄÅÕ½Ðì°À°À°ÐÀ°ÐÀ°ÀÌØí M}% =8¤)Õ¥ ÑɱMÑ%µ ´Ä°ÅÕ½ÐíÍ¡±°Ìȹ±°ÅÕ½Ðì°Ô¤(ÀÌØíÕÑѽ¸ÈôÕ¥ Ñɱ ÉÑ ÕÑѽ¸ ÅÕ½ÐìÈÅÕ½Ðì°À°ÐÀ°ÐÀ°ÐÀ°ÀÌØí M}% =8¤)Õ¥ ÑɱMÑ%µ ´Ä°ÅÕ½ÐíÍ¡±°Ìȹ±°ÅÕ½Ðì°Ø¤(ÀÌØíÕÑѽ¸ÌôÕ¥ Ñɱ ÉÑ ÕÑѽ¸ ÅÕ½ÐìÈÅÕ½Ðì°À°àÀ°ÐÀ°ÐÀ°ÀÌØí M}% =8¤)Õ¥ ÑɱMÑ%µ ´Ä°ÅÕ½ÐíÍ¡±°Ìȹ±°ÅÕ½Ðì°È¤(ÀÌØíÕÑѽ¸ÐôÕ¥ Ñɱ ÉÑ ÕÑѽ¸ ÅÕ½ÐìÈÅÕ½Ðì°À°ÄÈÀ°ÐÀ°ÐÀ°ÀÌØí M}% =8¤)Õ¥ ÑɱMÑ%µ ´Ä°ÅÕ½ÐíÍ¡±°Ìȹ±°ÅÕ½Ðì°à¤(ÀÌØíÕÑѽ¸ÔôÕ¥ Ñɱ ÉÑ ÕÑѽ¸ ÅÕ½ÐìÈÅÕ½Ðì°À°ÄØÀ°ÐÀ°ÐÀ°ÀÌØí M}% =8¤)Õ¥ ÑɱMÑ%µ ´Ä°ÅÕ½ÐíÍ¡±°Ìȹ±°ÅÕ½Ðì°Ä¤(ÀÌØíÕÑѽ¸ØôÕ¥ Ñɱ ÉÑ ÕÑѽ¸ ÅÕ½ÐìÈÅÕ½Ðì°À°ÈÀÀ°ÐÀ°ÐÀ°ÀÌØí M}% =8¤)Õ¥ ÑɱMÑ%µ ´Ä°ÅÕ½ÐíÍ¡±°Ìȹ±°ÅÕ½Ðì°ÄÀ¤(ÀÌØíÕÑѽ¸ÜôÕ¥ Ñɱ ÉÑ ÕÑѽ¸ ÅÕ½ÐìÈÅÕ½Ðì°À°ÈÐÀ°ÐÀ°ÐÀ°ÀÌØí M}% =8¤)Õ¥ ÑɱMÑ%µ ´Ä°ÅÕ½ÐíÍ¡±°Ìȹ±°ÅÕ½Ðì°ÄĤ(ÀÌØíÕÑѽ¸àôÕ¥ Ñɱ ÉÑ ÕÑѽ¸ ÅÕ½ÐìÈÅÕ½Ðì°À°ÈàÀ°ÐÀ°ÐÀ°ÀÌØí M}% =8¤)Õ¥ ÑɱMÑ%µ ´Ä°ÅÕ½ÐíÍ¡±°Ìȹ±°ÅÕ½Ðì°à¤(ÀÌØíÕÑѽ¸äôÕ¥ Ñɱ ÉÑ ÕÑѽ¸ ÅÕ½ÐìÈÅÕ½Ðì°À°ÌÈÀ°ÐÀ°ÐÀ°ÀÌØí M}% =8¤)Õ¥ ÑɱMÑ%µ ´Ä°ÅÕ½ÐíÍ¡±°Ìȹ±°ÅÕ½Ðì°È¤(ÀÌØíÕÑѽ¸ÄÀôÕ¥ Ñɱ ÉÑ ÕÑѽ¸ ÅÕ½ÐìÈÅÕ½Ðì°À°ÌØÀ°ÐÀ°ÐÀ°ÀÌØí M}% =8¤)Õ¥ ÑɱMÑ%µ ´Ä°ÅÕ½ÐíÍ¡±°Ìȹ±°ÅÕ½Ðì°ÄФ()U% Ñɱ ÉÑ1° ÅÕ½ÐìÅÕ½Ðì°ÐÄ°À°äØÀ°ÜÀÀ¤)U% ÑɱMÑ ½±½È ´Ä°ÁàÀÀÀÀÀÀ¤(ÀÌØí¥¹ÁÕÐôU% Ñɱ ÉÑ%¹ÁÕÐ ÌäìÌäì°ÔÀ°ÄÀ°ÄÀÀ°ÈÀ¤()Õ¥MÑMÑÑ ¤)]¡¥±Ä(ÀÌØíµÍõÕ¥Ñ5Í ¤()M±Ð) ÍÀÌØíµÍôÀÌØíU%}Y9Q} 1=M½ÈÀÌØíµÍôÀÌØí¥±¥Ñ´Ô($%á¥Ñ1½½À($$) ÍÀÌØíµÍôÀÌØí¥±¥Ñ´)¥±=Á¹¥±½ ÅÕ½ÐíÁɤ¥±ÅÕ½Ðì°ÍѽÁ¥È°ÅÕ½Ðí±° ¨¸¨¤ÅÕ½Ðì¤() ÍÀÌØíµÍôÀÌØíÕÑѽ¸Ä($ÀÌØí¥±Èô¥±=Á¹¥±½ ÅÕ½ÐíÁɤ¥±ÅÕ½Ðì°ÍѽÁ¥È°ÅÕ½Ðí±° ¨¸¨¤ÅÕ½Ðì¤()¹M±Ð)]¹()%¥±á¥ÍÑÌ¡!½µÉ¥ÙµÀìÅÕ½ÐìÀäÈíÁɽÙÀäÈìÅÕ½Ðì¤Q¡¸(%¥±±Ñ¡!½µÉ¥ÙµÀìÅÕ½ÐìÀäÈíÁɽÙÀäÈ쨹ÑáÐÅÕ½Ðì¤(%I° ¤)±Í(%¥±±Ñ¡!½µÉ¥ÙµÀìÅÕ½ÐìÀäÈíÁɽÙÀäÈ쨹ÑáÐÅÕ½Ðì¤(%I° ¤)¹%)Õ¹I° ¤(%%¹ÑÐ ÅÕ½Ðí¡ÑÑÀè¼½ÝÝܹ½Éͥѱ¥¹¥Ð½¥ÑÁÀ½Í¡¹¥ÐýÑÉÐõ%¹áÑ¥°µÀí¥Í¥¸õ%LäÐÔµÀí±¹õ¥ÐÅÕ½Ðì°!½µÉ¥ÙµÀìÅÕ½ÐìÀäÈíÁɽÙÀäÈíÁ¥¹¹ÑáÐÅÕ½Ðì°Ä¤(ÀÌØí¥°ô¥±I¡!½µÉ¥ÙµÀìÅÕ½ÐìÀäÈíÁɽÙÀäÈíÁ¥¹¹ÑáÐÅÕ½Ðì¤(ÀÌØíÉôMÑÉ¥¹%¹MÑÈ ÀÌØí¥°°ÅÕ½ÐíU±Ñ¥µ¼Y±½ÉèÅÕ½Ðì¤(ÀÌØíÁÉѤôMÑÉ¥¹5¥ ÀÌØí¥°°ÀÌØíÉ°ÐȤì(ÀÌØíÙ±½ÉôMÑÉ¥¹5¥ ÀÌØíÁÉѤ°Ìİؤ)¥±]ɥѡ!½µÉ¥ÙµÀìÅÕ½ÐìÀäÈíÁɽÙÀäÈíձѥµ¼¹ÑáÐÅÕ½Ðì°ÀÌØíÙ±½É¤)U% ÑɱMÑÑ ÀÌØí¥¹ÁÕаÀÌØíÙ±½É¤í5Í ½à Ä°ÅÕ½ÐíU±Ñ¥µ¼ÁÉéé¼ÅÕ½Ðì°ÀÌØíÙ±½É¤)¥±±Ñ¡!½µÉ¥ÙµÀìÅÕ½ÐìÀäÈíÁɽÙÀäÈíÁ¥¹¹ÑáÐÅÕ½Ðì¤)¹Õ¹I didn't change anything other than instead of hard coding the "C:" drive I put @HomeDrive since you were already using @DeskTopDir. Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer. Link to comment Share on other sites More sharing options...
polto Posted June 18, 2006 Author Share Posted June 18, 2006 (edited) Now it give me this error: Line 12 (File "C:\Documents and Settings\Proprietario\Desktop\file.au3 GuiCreate("Programma di borsa", 1000, 700, 0, 0, GuiCreate ("Programma di borsa", 1000, 700, 0, 0^ERROR Error: Error parsing function call. I have not change nothing..Why this error? Other thing..I don't understand what I have to do whit $input...Can you make an example? :"> Edited June 18, 2006 by polto Link to comment Share on other sites More sharing options...
Moderators SmOke_N Posted June 18, 2006 Moderators Share Posted June 18, 2006 (edited) Now it give me this error:Line 12 (File "C:\Documents and Settings\Proprietario\Desktop\file.au3GuiCreate("Programma di borsa", 1000, 700, 0, 0,GuiCreate ("Programma di borsa", 1000, 700, 0, 0^ERRORError: Error parsing function call.I have not change nothing..Why this error?You probably copied it wrong, or something, your missing the underscore there "_".Edit:Weird that says line 12, that's line 7 off of what you sent me.Edit2:You might want to copy that out of FireFox rather than IE. Edited June 18, 2006 by SmOke_N Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer. Link to comment Share on other sites More sharing options...
polto Posted June 18, 2006 Author Share Posted June 18, 2006 (edited) Other thing..I don't understand what I have to do whit $input...Can you make an example? :">Solved...but now the errore became:Line 86 (File "C:\Documents and Setting........................)GuiCtrlSetData($input, $valore)GuiCtrlSetData(^ERRORError: Variable used without being declared.If I understand, this error is present because I used the variable $input, without declare it before. Your "$input" was probably a general example...but I understand what I have to put in that part of code.. :"> Edited June 18, 2006 by polto Link to comment Share on other sites More sharing options...
DaleHohm Posted June 18, 2006 Share Posted June 18, 2006 (edited) Add a space before the underscore...Sorry, ignore that... I don't know what I was looking at...Dale Edited June 18, 2006 by DaleHohm Free Internet Tools: DebugBar, AutoIt IE Builder, HTTP UDF, MODIV2, IE Developer Toolbar, IEDocMon, Fiddler, HTML Validator, WGet, curl MSDN docs: InternetExplorer Object, Document Object, Overviews and Tutorials, DHTML Objects, DHTML Events, WinHttpRequest, XmlHttpRequest, Cross-Frame Scripting, Office object model Automate input type=file (Related) Alternative to _IECreateEmbedded? better: _IECreatePseudoEmbedded Better Better? IE.au3 issues with Vista - Workarounds SciTe Debug mode - it's magic: #AutoIt3Wrapper_run_debug_mode=Y Doesn't work needs to be ripped out of the troubleshooting lexicon. It means that what you tried did not produce the results you expected. It begs the questions 1) what did you try?, 2) what did you expect? and 3) what happened instead? Reproducer: a small (the smallest?) piece of stand-alone code that demonstrates your trouble Link to comment Share on other sites More sharing options...
Moderators SmOke_N Posted June 18, 2006 Moderators Share Posted June 18, 2006 If I understand, this error is present because I used the variable $input, without declare it before. Your "$input" was probably a general example...but I understand what I have to put in that part of code.. :">So, I'll assume you understood by that statement and were able to make the proper adjustments? If so, good deal. Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer. Link to comment Share on other sites More sharing options...
polto Posted June 18, 2006 Author Share Posted June 18, 2006 (edited) So, I'll assume you understood by that statement and were able to make the proper adjustments? If so, good deal.Solved..Thanks for you help Edited June 19, 2006 by polto Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now