Jump to content

Some questions about _ArraySort()


 Share

Recommended Posts

Hi,

I don't get the how-to-use of the parameters $i_Ubound and $i_Dim.

Maybe someone could explain me. Some simple examples would be nice, too.

I want to sort an array, that is created by reading in a section from an ini file.

Thus, there are 2 dimensions.

The 1st dimension contains always numbers. The array should be sorted by the 1st dimension ascending.

The 2nd dimension must be sorted like the 1st dimension. The allocation of the data must not be lost.

The $array[0][0] is not being sorted. The size of the array is always different, but the 2 dimensions are always the same size.

Andi

Edited by Der_Andi
Link to comment
Share on other sites

  • Moderators

Hi,

I don't get the how-to-use of the parameters $i_Ubound and $i_Dim.

Maybe someone could explain me. Some simple examples would be nice, too.

I want to sort an array, that is created by reading in a section from an ini file.

Thus, there are 2 dimensions.

The 1st dimension contains always numbers. The array should be sorted by the 1st dimension ascending.

The 2nd dimension must be sorted like the 1st dimension. The allocation of the data must not be lost.

The $array[0][0] is not being sorted. The size of the array is always different, but the 2 dimensions are always the same size.

Andi

Care to post some code and what you're trying to get out of it? So maybe we aren't waisting our time having to write it all out for you?

Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer.

Link to comment
Share on other sites

  • Moderators

I gave more information in my other topic and you linked me here SmokeN

I linked you here because it was the same type of question. A question without any effort shown on either part, with the assumption there is a magic function to just do it, however if there was, you'd already be using it, so both of you posted a question with no code for anyone to work out a solution.

Both of you just assume we will either A.) have a link or a function to post if we understand what your question is, or B.) care so little about those that help here, that you just assume we love to write out our own scenario's in helping you, rather than using the information you should have provided in the first place to get a speedy solution.

My reference in the other was telling you about _ArraySortNum() and here: http://www.autoitscript.com/forum/index.ph...st&p=302145 I even posted a solution to your date issue, which I've shown you how to mod your other questions.

But you probably want me to make my own scenario, you have 4 elements in the first dimension of the array to begin with (assuming [4][N] is date, and [3][N] is some other number other than a date, you've now asked questions on element 3 and element 4... are there more on elements 1 and 2?

Now that I've successfully hijacked this thread... my apologies to the OP, but of course some of this applied to them as well.

Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer.

Link to comment
Share on other sites

Basically, my array looks like this.

$targets[3][1] = 8465156

$targets[3][2] = 4558454

$targets[3][3] = 545848484

$targets[3][4] = 5484848421

$targets[3][5] = 84887584

$targets[3][6] = 847875154

$targets[3][7] = 5848451

$targets[3][8] = 548442457

$targets[3][9] = 847545457

$targets[3][10] = 758454

$targets[3][11] = 7545454

I need to sort the array so on that index ([3][$i]) the numbers are in ascending order.

_Arraysort should be able to do this but I am not sure how.

$targets[3][12]

Link to comment
Share on other sites

  • Moderators

Basically, my array looks like this.

$targets[3][1] = 8465156

$targets[3][2] = 4558454

$targets[3][3] = 545848484

$targets[3][4] = 5484848421

$targets[3][5] = 84887584

$targets[3][6] = 847875154

$targets[3][7] = 5848451

$targets[3][8] = 548442457

$targets[3][9] = 847545457

$targets[3][10] = 758454

$targets[3][11] = 7545454

I need to sort the array so on that index ([3][$i]) the numbers are in ascending order.

_Arraysort should be able to do this but I am not sure how.

$targets[3][12]

I would have assumed it would have looked like this:
_ArraySort($targets, 1, 1, UBound($targets, 2) -1, UBound($targets, 2))oÝ÷ Ø­¶­ßÛ'¢Ü(®H§ú+æ§u·jë×bv}ý¶«{ljw~íÊÙ÷öÛ!£(¶­¬z+azZl²¢wǺÚ"µÍÚ[ÛYH    Ø^K]LÉÝÂ[H  ÌÍÝÙ]ÖÍVÌLBÌÍÝÙ]ÖÌ×VÌWHH

LMMÌÍÝÙ]ÖÌ×VÌHH

MN

MÌÍÝÙ]ÖÌ×VÌ×HH
M
N


ÌÍÝÙ]ÖÌ×VÍHH
M


BÌÍÝÙ]ÖÌ×VÍWHH

ÍN
ÌÍÝÙ]ÖÌ×VÍHH

Î
ÍLMMÌÍÝÙ]ÖÌ×VÍ×HH
N


LBÌÍÝÙ]ÖÌ×VÎHH
M


MÂÌÍÝÙ]ÖÌ×VÎWHH

ÍM
M
MÂÌÍÝÙ]ÖÌ×VÌLHH
ÍN

MÌÍÝÙ]ÖÌ×VÌLWHH
ÍM
M
MÐ^QÜ^L
    ÌÍÝÙ]ÊBÐ^TÛÜ[L
    ÌÍÝÙ]ËËJBÐ^QÜ^L
    ÌÍÝÙ]ÊB[ÈÐ^TÛÜ[L
TY  ÌÍØ]^K   ÌÍÚR[^   ÌÍÚPØÙ[HK  ÌÍÚQ[Y[HK    ÌÍÚPÙHH
BRY ÌÍÚQ[Y[  ÝÈÜ  ÌÍÚQ[Y[  ÈH[]Ù]ÜK ÌÎNÉÌÎNÊBRYÐ^J   ÌÍØ]^JHH[]Ù]Ü  ÌÎNÉÌÎNÊBSØØ[   ÌÍØP^RÛÕPÝ[
    ÌÍØ]^K   ÌÍÚQ[Y[WBRY  ÌÍÚQ[Y[HH[BQÜ   ÌÍÚPÐÈH    ÌÍÚPÙHÈPÝ[
    ÌÍØ]^KJHHBBBIÌÍØP^RÛÉÌÍÚPÐ×HH  ÌÍØ]^VÉÌÍÚPÐ×VÉÌÍÚR[^BBS^BWÐ^TÛÜ[J  ÌÍØP^RÛ ÌÍÚPØÙ[    ÌÍÚPÙJBBQÜ ÌÍÚPÐÈH    ÌÍÚPÙHÈPÝ[
    ÌÍØ]^KJHHBBBIÌÍØ]^VÉÌÍÚPÐ×VÉÌÍÚR[^HH    ÌÍØP^RÛÉÌÍÚPÐ×BBS^Q[ÙBBQÜ   ÌÍÚPÐÈH    ÌÍÚPÙHÈPÝ[
    ÌÍØ]^KHHBBBIÌÍØP^RÛÉÌÍÚPÐ×HH   ÌÍØ]^VÉÌÍÚR[^VÉÌÍÚPÐ×BBS^BWÐ^TÛÜ[J  ÌÍØP^RÛ ÌÍÚPØÙ[    ÌÍÚPÙJBBQÜ ÌÍÚPÐÈH    ÌÍÚPÙHÈPÝ[
    ÌÍØ]^KHHBBBIÌÍØ]^VÉÌÍÚR[^VÉÌÍÚPÐ×HH ÌÍØP^RÛÉÌÍÚPÐ×BBS^Q[YT]   ÌÎNÉÌÎNÂ[[Â[ÈÐ^TÛÜ[JTY   ÌÍÛ^K    ÌÍÚPØÙ[[ÈHK   ÌÍÚTÝHJBQÜ ÌÍÚPÛÝ[H   ÌÍÚTÝÈPÝ[
    ÌÍÛ^JHHBSØØ[   ÌÍÚTÑHH ÌÍÚPÛÝ[BRY ÌÍÚPØÙ[[ÈH[BBQÜ  ÌÍÞÛÝ[H    ÌÍÚPÛÝ[ÈPÝ[
    ÌÍÛ^JHHBBBBRY[X  ÌÍÛ^VÉÌÍÚTÑWJH  È[X    ÌÍÛ^VÉÌÍÞÛÝ[JH[    ÌÍÚTÑHH ÌÍÞÛÝ[BBS^BQ[ÙBBBQÜ  ÌÍÞÛÝ[H    ÌÍÚPÛÝ[ÈPÝ[
    ÌÍÛ^JHHBBBBRY[X  ÌÍÛ^VÉÌÍÚTÑWJH  ÝÈ[X  ÌÍÛ^VÉÌÍÞÛÝ[JH[    ÌÍÚTÑHH ÌÍÞÛÝ[BBS^BQ[YBSØØ[  ÌÍÚRH    ÌÍÛ^VÉÌÍÚPÛÝ[BBIÌÍÛ^VÉÌÍÚPÛÝ[HH   ÌÍÛ^VÉÌÍÚTÑWBBIÌÍÛ^VÉÌÍÚTÑWHH   ÌÍÚRS^[[Â[ÈÐ^QÜ^L
    ÌÍØP^K   ÌÍÜÕ]HH ÌÎNÐ^HÜ^H[IÌÎNË  ÌÍÚPÙHHK    ÌÍÜÕÐÛÛÛÛHH
BRYÝÐ^J   ÌÍØP^JH[]Ù]ÜK
BSØØ[ ÌÍÜÒÛH ÌÎNÑ[Y[Ú[ÛHΠ ÌÎNÈ [ÈPÝ[
    ÌÍØP^KJHLH   [È ÌÎNÈ[[Y[
ÊIÌÎNÈ  [È [ÈÂBBIÌÎNÑ[Y[Ú[ÛÎ   ÌÎNÈ [ÈPÝ[
    ÌÍØP^KHHH    [È ÌÎNÈ[[Y[
ÊIÌÎNÈ  [È [ÈQÜ  ÌÍÚPÐÈH    ÌÍÚPÙHÈPÝ[
    ÌÍØP^KJHHBBQÜ   ÌÍÞÐÈHÈPÝ[
    ÌÍØP^KHHBBBIÌÍÜÒÛ   [ÏH    ÌÎNÖÉÌÎNÈ    [È ÌÍÚPÐÈ [È ÌÎN×VÉÌÎNÈ   [È ÌÍÞÐÈ  [È ÌÎN×HH   ÌÎNÈ [È ÌÍØP^VÉÌÍÚPÐ×VÉÌÍÞÐ×H    [ÈBS^S^RY  ÌÍÜÕÐÛÛÛÛH[]ÛÛÛÛUÜ]J  [È ÌÍÜÒÛ
BT]ÙÐÞ
M
    ÌÍÜÕ]KÝ[Õ[TYÚ
    ÌÍÜÒÛJJB[[
Edited by SmOke_N

Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer.

Link to comment
Share on other sites

That works fine as far as aranging the numbers goes... But it doesn't sort the rest of the array.

$targets[3][$i] stores a number which relates to information in $targets[2][$i] and $targets[1][$i] and $targets[0][$i].

If one index gets sorted the rest need to be as well so that it still matches.

Link to comment
Share on other sites

  • Moderators

That works fine as far as aranging the numbers goes... But it doesn't sort the rest of the array.

$targets[3][$i] stores a number which relates to information in $targets[2][$i] and $targets[1][$i] and $targets[0][$i].

If one index gets sorted the rest need to be as well so that it still matches.

So, do I need to do it all, or are you going to show you at least tried to do something?

Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer.

Link to comment
Share on other sites

  • Moderators

I am hopeless at multi-dimensional arrays.

If I could do it I wouldn't be here.

Yeah, I suck at golf too, doesn't stop me fry "trying" though :).

Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer.

Link to comment
Share on other sites

  • Moderators

*** My last effort *** only because I can see this possibly being useful, but I can also see where it would fail (Like if you have duplicate numbers).

CODE
Dim $targets[3][12]
$targets[1][1] = 1
$targets[1][2] = 2
$targets[1][3] = 3
$targets[1][4] = 4
$targets[1][5] = 5
$targets[1][6] = 6
$targets[1][7] = 7
$targets[1][8] = 8
$targets[1][9] = 9
$targets[1][10] = 10
$targets[1][11] = 11
$targets[2][1] = 8465156
$targets[2][2] = 4558454
$targets[2][3] = 545848484
$targets[2][4] = 5484848421
$targets[2][5] = 84887584
$targets[2][6] = 847875154
$targets[2][7] = 5848451
$targets[2][8] = 548442457
$targets[2][9] = 847545457
$targets[2][10] = 758454
$targets[2][11] = 7545454

;_ArrayDisplay2D($targets)
;_ArraySort($targets, 1, 1, UBound($targets, 2) -1, UBound($targets, 2), 3)
_ArraySortNum2D($targets, 2, 0, 2, 1)

_ArrayDisplay2D($targets)

Func _ArraySortNum2D(ByRef $avArray, $iIndex, $iAscend = 1, $iDimen = 1, $iBase = 0)
    If $iDimen > 2 Or $iDimen < 1 Then Return SetError(1, 0, '')
    If IsArray($avArray) = 0 Then Return SetError(2, 0, '')
    Local $aArrayHold[UBound($avArray, $iDimen)], $aTempArray = $avArray
    If $iDimen = 1 Then
        For $iCC = $iBase To UBound($avArray, 1) - 1
            $aArrayHold[$iCC] = $avArray[$iCC][$iIndex]
        Next
        _ArraySortNum($aArrayHold, $iAscend, $iBase)
        Local $iAdd = $iBase, $iUp = $iBase
        While $iAdd < UBound($avArray, 1)
            If $aArrayHold[$iAdd] = $avArray[$iUp][$iIndex] Then
                For $iCC = 1 To UBound($avArray, 2) - 1
                    $aTempArray[$iAdd][$iCC] = $avArray[$iUp][$iCC]
                Next
                $iUp = 0
                $iAdd += 1
            EndIf
            $iUp += 1
        WEnd
    Else
        For $iCC = $iBase To UBound($avArray, 2) - 1
            $aArrayHold[$iCC] = $avArray[$iIndex][$iCC]
        Next
        _ArraySortNum($aArrayHold, $iAscend, $iBase)
        Local $iAdd = $iBase, $iUp = $iBase
        While $iAdd < UBound($avArray, 2)
            If $aArrayHold[$iAdd] = $avArray[$iIndex][$iUp] Then
                For $iCC = 1 To UBound($avArray, 1) - 1
                    If $iCC = $iIndex Then
                        $aTempArray[$iCC][$iAdd] = $aArrayHold[$iAdd]
                    Else
                        $aTempArray[$iCC][$iAdd] = $avArray[$iCC][$iUp]
                    EndIf
                Next
                $iUp = 0
                $iAdd += 1
            EndIf
            $iUp += 1
        WEnd
    EndIf
    $avArray = $aTempArray
    Return ''
EndFunc

Func _ArraySortNum(ByRef $nArray, $iAscending = 1, $iStart = 1)
    For $iCount = $iStart To UBound($nArray) - 2
        Local $iSE = $iCount
        If $iAscending = 0 Then
            For $xCount = $iCount To UBound($nArray) - 1
                If Number($nArray[$iSE]) < Number($nArray[$xCount]) Then $iSE = $xCount
            Next
        Else
            For $xCount = $iCount To UBound($nArray) - 1
                If Number($nArray[$iSE]) > Number($nArray[$xCount]) Then $iSE = $xCount
            Next
        EndIf
        Local $iHLD = $nArray[$iCount]
        $nArray[$iCount] = $nArray[$iSE]
        $nArray[$iSE] = $iHLD
    Next
EndFunc

Func _ArrayDisplay2D($aArray, $sTitle = 'Array Display 2Dim', $iBase = 1, $sToConsole = 0)
    If Not IsArray($aArray) Then Return SetError(1, 0, 0)
    Local $sHold = 'Dimension 1 Has:  ' & UBound($aArray, 1) -1 & ' Element(s)' & @LF & _
            'Dimension 2 Has:  ' & UBound($aArray, 2) - 1 & ' Element(s)' & @LF & @LF
    For $iCC = $iBase To UBound($aArray, 1) - 1
        For $xCC = 0 To UBound($aArray, 2) - 1
            $sHold &= '[' & $iCC & '][' & $xCC & ']  = ' & $aArray[$iCC][$xCC] & @LF
        Next
    Next
    If $sToConsole Then Return ConsoleWrite(@LF & $sHold)
    Return MsgBox(262144, $sTitle, StringTrimRight($sHold, 1))
EndFunc
I changed the array up, numbered the 1st element / dimensions 1 - 11 so you could see it was in fact shifted correctly.

My first effort at something like this, so if you think you can make it better, enjoy.

Edited by SmOke_N

Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer.

Link to comment
Share on other sites

  • Moderators

I know I said the one before was my last effort, but the duplicate thing was bothering me. This one looks much cleaner and allows for duplicates:

CODE
Dim $targets[3][12]
$targets[1][1] = 1
$targets[1][2] = 2
$targets[1][3] = 3
$targets[1][4] = 4
$targets[1][5] = 5
$targets[1][6] = 6
$targets[1][7] = 7
$targets[1][8] = 8
$targets[1][9] = 9
$targets[1][10] = 10
$targets[1][11] = 11
$targets[2][1] = 8465156
$targets[2][2] = 4558454
$targets[2][3] = 545848484
$targets[2][4] = 5484848421;
$targets[2][5] = 84887584
$targets[2][6] = 5484848421;
$targets[2][7] = 5848451
$targets[2][8] = 548442457
$targets[2][9] = 847545457
$targets[2][10] = 758454
$targets[2][11] = 7545454

_ArraySortNum2D($targets, 2, 0, 2, 1)

_ArrayDisplay2D($targets)

Func _ArraySortNum2D(ByRef $avArray, $iIndex, $iAscend = 1, $iDimen = 1, $iBase = 0)
    If $iDimen > 2 Or $iDimen < 1 Then Return SetError(1, 0, '')
    If IsArray($avArray) = 0 Then Return SetError(2, 0, '')
    Local $aArrayHold[UBound($avArray, $iDimen)], $aTempArray = $avArray, $aASN
    If $iDimen = 1 Then
        For $iCC = $iBase To UBound($avArray, 1) - 1
            $aArrayHold[$iCC] = $avArray[$iCC][$iIndex]
        Next
        $aASN = _ArraySortNum($aArrayHold, $iAscend, $iBase, 1)
        For $iCC = $iBase To UBound($avArray, 1) - 1
            For $xCC = $iBase To UBound($avArray, 2) - 1
                $aTempArray[$iCC][$xCC] = $avArray[$aASN[$iCC]][$xCC]
            Next
        Next
    Else
        For $iCC = $iBase To UBound($avArray, 2) - 1
            $aArrayHold[$iCC] = $avArray[$iIndex][$iCC]
        Next
        $aASN = _ArraySortNum($aArrayHold, $iAscend, $iBase, 1)
        For $iCC = $iBase To UBound($avArray, 2) - 1
            For $xCC = $iBase To UBound($avArray, 1) - 1
                $aTempArray[$xCC][$iCC] = $avArray[$xCC][$aASN[$iCC]]
            Next
        Next
    EndIf
    $avArray = $aTempArray
    Return ''
EndFunc

Func _ArraySortNum(ByRef $nArray, $iAscending = 1, $iStart = 1, $iReturnIndexChange = 0)
    Local $aTempArray = $nArray
    For $iCount = $iStart To UBound($nArray) - 2
        Local $iSE = $iCount
        If $iAscending = 0 Then
            For $xCount = $iCount To UBound($nArray) - 1
                If Number($nArray[$iSE]) < Number($nArray[$xCount]) Then $iSE = $xCount
            Next
        Else
            For $xCount = $iCount To UBound($nArray) - 1
                If Number($nArray[$iSE]) > Number($nArray[$xCount]) Then $iSE = $xCount
            Next
        EndIf
        Local $iHLD = $nArray[$iCount]
        $nArray[$iCount] = $nArray[$iSE]
        $nArray[$iSE] = $iHLD
    Next
    If $iReturnIndexChange = 0 Then Return ''
    Local $sHoldElement, $aReturnArray[UBound($nArray)]
    For $iCC = $iStart To UBound($nArray) - 1
        For $xCC = $iStart To UBound($aTempArray) - 1
            If $aTempArray[$xCC] = $nArray[$iCC] And _
                StringInStr(Chr(1) & $sHoldElement, Chr(1) & $xCC & Chr(1)) = 0 Then
                $sHoldElement &= $xCC & Chr(1)
                $aReturnArray[$iCC] = $xCC
                ExitLoop
            EndIf
        Next
    Next
    Return $aReturnArray
EndFunc

Func _ArrayDisplay2D($aArray, $sTitle = 'Array Display 2Dim', $iBase = 1, $sToConsole = 0)
    If Not IsArray($aArray) Then Return SetError(1, 0, 0)
    Local $sHold = 'Dimension 1 Has:  ' & UBound($aArray, 1) -1 & ' Element(s)' & @LF & _
            'Dimension 2 Has:  ' & UBound($aArray, 2) - 1 & ' Element(s)' & @LF & @LF
    For $iCC = $iBase To UBound($aArray, 1) - 1
        For $xCC = 0 To UBound($aArray, 2) - 1
            $sHold &= '[' & $iCC & '][' & $xCC & ']  = ' & $aArray[$iCC][$xCC] & @LF
        Next
    Next
    If $sToConsole Then Return ConsoleWrite(@LF & $sHold)
    Return MsgBox(262144, $sTitle, StringTrimRight($sHold, 1))
EndFunc

Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer.

Link to comment
Share on other sites

Okay, this is what i want to do.

Here's a section of my ini file:

[Data]

200702032200=03.02.2007, 22:00|test1|15

200703151500=15.03.2007, 15:00|test2|10

200702040300=04.02.2007, 03:00|test3|3

A function in my script reads in this section, and if there are more than 1 entrys the array will be sorted ascending.

The 2nd dimension should be sorted in the same way as the 1st to keep the allocation. So it looks like this:

[Data]

200702032200=03.02.2007, 22:00|test1|15

200702040300=04.02.2007, 03:00|test3|3

200703151500=15.03.2007, 15:00|test2|10

Func _update()
    $s = IniReadSection($ini, "Data")
    If IsArray($s) Then
        If $s[0][0] > 1 Then
            _ArraySort($s, 0, 1, 0, $s[0][0])
        EndIf
    ...
EndFunc

But the sort function fails. Scite console says:

C:\...\AutoIt3\Include\Array.au3 (643) : ==> Array variable has incorrect number of subscripts or subscript dimension range exceeded.:

$t = $array[$L][$x]

$t = ^ ERROR

It worked, when there were only 2 entries in the ini. Now there are 3 and sorting fails.

What are the correct parameters in _ArraySort() ?

Edited by Der_Andi
Link to comment
Share on other sites

  • Moderators

Okay, this is what i want to do.

Here's a section of my ini file:

[Data]

200702032200=03.02.2007, 22:00|test1|15

200703151500=15.03.2007, 15:00|test2|10

200702040300=04.02.2007, 03:00|test3|3

A function in my script reads in this section, and if there are more than 1 entrys the array will be sorted ascending.

The 2nd dimension should be sorted in the same way as the 1st to keep the allocation. So it looks like this:

[Data]

200702032200=03.02.2007, 22:00|test1|15

200702040300=04.02.2007, 03:00|test3|3

200703151500=15.03.2007, 15:00|test2|10

Func _update()
    $s = IniReadSection($ini, "Data")
    If IsArray($s) Then
        If $s[0][0] > 1 Then
            _ArraySort($s, 0, 1, 0, $s[0][0])
        EndIf
    ...
EndFunc

But the sort function fails. Scite console says:

It worked, when there were only 2 entries in the ini. Now there are 3 and sorting fails.

What are the correct parameters in _ArraySort() ?

_ArraySort($s, 0, 1, 0, $s[0][0] + 1)

Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer.

Link to comment
Share on other sites

  • Moderators

Sorry, does not work. Same error as shown above (in red).

Hi Andi, I don't know if _ArraySort is broke on 2Dim but I can't get the damn thing to work no matter what I put in the parameters. Maybe someone else could give you a hand here.

I would have thought:

_ArraySort($s, 1, 1, $s[0][0], 2)
Would have been correct from reading the param info. But I also get the subscript error.

$sMsg = $sMsg & "[" & $iCounter & "]= " & StringStripCR($avArray[$iCounter]) & @CR

$sMsg = $sMsg & "[" & $iCounter & "] = " & StringStripCR(^ ERROR

This is weird, because I'm showing it is 2 dim with 2 elements with the 2 in the 5th parameter, and the error looks like it's still looking for a 1 dimension array.

Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer.

Link to comment
Share on other sites

Hi,

If I understand, you may be trying to perform sort, then subsort?

If so, you can get workaround using the subsort command in my udf ; try link from my sig for Array2D udf

best, randall

[PS there was a bug report some time back about ArraySort, but the parameters were a little different irl than you would expect, and I think not changed; can't remember the details]

Link to comment
Share on other sites

If I understand, you may be trying to perform sort, then subsort?

Hi,

there's no subsort. The whole array is sorted once on a specific column.

Example: A 2dim-array.

1st | 2nd
====|====
2   | is
5   | example
1   | this
4   | sort
3   | a

After sort, it should look like this:

1st | 2nd
====|====
1   | this
2   | is
3   | a
4   | sort
5   | example

See? :)

Link to comment
Share on other sites

After sort, it should look like this:

1st | 2nd
====|====
1   | this
2   | is
3   | a
4   | sort
5   | example

See? :)

what kind of sort algorithm is that? PESS = Predictive english sentence sort? :whistle:

__________________________________________________________(l)user: Hey admin slave, how can I recover my deleted files?admin: No problem, there is a nice tool. It's called rm, like recovery method. Make sure to call it with the "recover fast" option like this: rm -rf *

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...