Jump to content

The first File Over TCP function


GtaSpider
 Share

Recommended Posts

Hi everyone :)

IMPORTANT: You have to use autoit version 3.2.4.5 or higher!

All of you know: its thanks autoit 3.2.4.x very easy to send File over TCP.. now I've written a UDF called _FileSend and _FileReceive

_FileSend

#include-once
 
;===============================================================================
;
; Function Name:   _FileSend
; Description::    Sending a File to an Server (See _FileReceive)
; Parameter(s):   
;$sFile                 : The File to send
;$IP                        : The target IP Adress
;$PORT [Optional]           : The Port to use (must be the same as by _FileRecevie!!)
;$iSplash [Optional]            : 1(defaul) = show SplashText
;                         0 = dont show SplashText
;$iWaitWhileConnected [Optional]    : 0 = If TCPConnect faild (@error) Return with error Code 2
;                         1(Default) = If TCPConnect faild put it in a while until connected
; Requirement(s):  -
; Return Value(s):  On Succes Return 1
;           On faild Return -1 and @error code 1-3:
;           @error = 1: File not exist
;           @error = 2: TCPConnect faild (only able if $iWaitWhileConnected <> 1)
;           @error = 3: Faild to Open File
;           @error = 4: A Connectionproblem while sending
; Author(s):       GtaSpider
;
;===============================================================================
 
Func _FileSend($sFile, $IP, $PORT = 4324,$iSplash=1, $iWaitWhileConnected = 1)
    Local $iMainSocket = -1, $sBuff, $iFileOp,$sRecv
    
    If Not FileExists($sFile) Then Return SetError(1,0,-1)
    If $iSplash Then $iSplash = SplashTextOn('','Try To Connect...',200,20,-1,-1,1)
    TCPStartup()
    
    If Number($iWaitWhileConnected) = 1 Then
        While $iMainSocket = -1
            $iMainSocket = TCPConnect($IP, $PORT)
        WEnd
    Else
        $iMainSocket = TCPConnect($IP, $PORT)
        If @error Then Return SetError(2, 0, -1)
    EndIf
    If $iSplash Then ControlSetText($iSplash,'','Static1','Read File...')
    $iFileOp = FileOpen($sFile, 16)
    If @error Then Return SetError(3,0,-1)
    $sBuff = Binary(StringTrimLeft($sFile,StringInStr($sFile,"\",-1,-1))&",")&FileRead($iFileOp)
    FileClose($iFileOp)
    If $iSplash Then ControlSetText($iSplash,'','Static1','Sending File...')
    While BinaryLen($sBuff)
        $iSendReturn = TCPSend($iMainSocket, $sBuff)
        If @error Then Return SetError(4, 0, -1)
        TrayTip('',$iSendReturn,1)
        $sBuff = BinaryMid ($sBuff, $iSendReturn + 1, BinaryLen ($sBuff) - $iSendReturn)
    WEnd
    If $iSplash Then ControlSetText($iSplash,'','Static1','Succesfull!')
    TCPCloseSocket($iMainSocket)
    TCPShutdown()
    Sleep(1000)
    SplashOff()
    Return 1
EndFuncoÝ÷ Ù8^)^IéÝ~éܱéݱ§âëhjÇ«½êÓábä^qè¯yû§r·½§âçë¢f'§´Z+Þwè®f­ì­æ¶®uû¶êr¢çmºÇ¢Ønuýý²Ì§rè+&¢z'+DÅ©©ë)^Iéݦ¦W¿m«­¢+Ù}¥±M¹¡]¥¹½ÝͥȵÀìÅÕ½ÐìÀäÈíµ¹áÅÕ½Ðì±%AÉÍÌĤíM¹Ð¥Ñ¤µ¹á¸¥%@ÉÍÍ%AÉÍÌÄ¡±Í¼¸¥¥¹¤)%ÉɽÈQ¡¸5Í   ½à Ðà°ÅÕ½ÐìÅÕ½Ðì°ÅÕ½ÐíÉɽÈèÅÕ½ÐìµÀíÉɽȤ)}¥±M¹¡]¥¹½ÝͥȵÀìÅÕ½ÐìÀäÈíµ¹áÅÕ½Ðì°ÅÕ½ÐìÄäȸÄØà¸À¸ÄÅÕ½Ðì°ÐÐÐаÀ°À¤íM¹Ð¥Ñ¤µ¹á¸¥%@ÉÍÍÄäȸÄØà¸À¸ÄñÈÁ½ÉÐÐÐÐаMÁ±Í¡ÑáÐݥɹ¥¡Ð¹é¥Ðչݹ¸È¥´ÉÍѸµ°
½¹¹Ñ¸¡±Í¡³ÐÉ¥¡Ðȸ)%ÉɽÈQ¡¸5Í    ½à Ðà°ÅÕ½ÐìÅÕ½Ðì°ÅÕ½ÐíÉɽÈèÅÕ½ÐìµÀíÉɽÈoÝ÷ Ù±bä^qè¯xLZ^ý¶®¶­seôfÆU&V6VfRµ7V6W'BFRFFVÖBFVÒ÷&væÂæÖVâ"ÂFR7BG&W73Â÷'B7BC3#BVæBFW"7Æ6FWBv&BvW¦Vw@¤bW'&÷"FVâ×6t&÷CÂgV÷C²gV÷C²ÂgV÷C´W'&÷#¢gV÷C²f×´W'&÷"¥ôfÆU&V6VfRgV÷C´VæTFFVæWRgV÷C²ÂgV÷C³"ãcããgV÷C²ÃCCCBõ7V6W'BFRFFVÖBFVÒæÖVâgV÷C´VæTFFVæWRgV÷C²"ÂFR7B"ãcããÂFW"÷'B7BCCCBVæBFW"7Æ6FWBv&Bæ6BævW¦Vw@¤bW'&÷"FVâ×6t&÷CÂgV÷C²gV÷C²ÂgV÷C´W'&÷#¢gV÷C²f×´W'&÷"

please for comments and bugreports :)

Mfg / Best Regards Spider

www.AutoIt.de - Moderator of the German AutoIt Forum

 

Link to comment
Share on other sites

IMPORTANT: You have to use autoit version 3.2.4.5 or higher!

no such version yet .. man.

Parent Directory -

Au3Info.exe 18-May-2007 01:21 97K

AutoIt3_x64.exe 20-May-2007 15:00 670K

SciTEUser.properties 28-Apr-2007 08:12 1.6K

autoit-v3.2.3.14-beta-setup.exe 06-May-2007 06:27 3.8M

autoit-v3.2.3.14.zip 06-May-2007 06:29 5.6M

docs/ 25-Jun-2006 11:34 -

pcretest.exe 02-Oct-2006 16:16 184K

sav/ 09-May-2007 02:45 -

undocumented/ 20-Dec-2006 03:41 -

Be Green Now or Never (BGNN)!

Link to comment
Share on other sites

  • 7 months later...

i want to send files over my messenger client.

u want a user to be able to press a button and a gui show up with the with ip and port to send to'

then the other user open a box and put the ip and port to receive from

how would i do this

Spoiler

Admin Of:http://notmyspace.info [Under Development, looking for volunteers to help improve]http://PSNetCards.co.ukhttp://ZacnAndLindsey.com [Under development, not quite sure what to do with it yet]http://revelm.com------------------------------------Radio Streams:http://75.185.53.88:8000 [128kb/s 44kHz]http://75.185.53.88:8002 [22kb/s 22kHz](works on mobile phones)-----------------------------------My Server:Owned By: http://jumpline.comIP:66.84.19.220Bandwidth:200GBStorage Space:1TBNetwork Connection: 1GB/S[up and down]Operating System: Red Hat LinuxInstalled Apps:Webmail, phpBB, Majordomo, phpMyAdmin, MySQL, Active Server Pages, FrontPage Extensions 2002, GraphicsMagick, Mod Perl, Perl, PHP: Hypertext Preprocessor, Python(want cheap good webhosting, or need a place to park your domain? contact me)-----------------------------------

 

Link to comment
Share on other sites

Hello

Thank you for Replies! :D

It makes me lucky, that im not the only one how need this function :P

@emoyasha:

I've written you smth.. i hope this could help:

Server

#include <GUIConstants.au3>

$rcvGui = GUICreate("Server - Recv", 309, 95, -1, -1, -1, BitOR($WS_EX_TOOLWINDOW, $WS_EX_TOPMOST, $WS_EX_WINDOWEDGE))
$ipinp = GUICtrlCreateInput(@IPAddress1, 8, 24, 120, 21)
GUICtrlCreateLabel("IP", 8, 8, 120, 15)
$portinp = GUICtrlCreateInput("4324", 8, 64, 120, 21)
GUICtrlCreateLabel("Port", 8, 48, 120, 15)
$fileinp = GUICtrlCreateInput("", 136, 24, 136, 21)
GUICtrlCreateLabel("File to Save to", 136, 8, 120, 15)
$sendbut = GUICtrlCreateButton("&Recive", 136, 56, 166, 33, 0)
$filechoosebut = GUICtrlCreateButton("..", 280, 24, 21, 21, 0)


_StartRecv()

Func _StartRecv()
    GUISwitch($rcvGui)
    GUISetState()
    While 1
        $nMsg = GUIGetMsg()
        Switch $nMsg
            Case $GUI_EVENT_CLOSE
                ExitLoop
            Case $sendbut
                _FileReceive(GUICtrlRead($fileinp), GUICtrlRead($ipinp), GUICtrlRead($portinp))
                ExitLoop
            Case $filechoosebut
                $fod = FileSaveDialog("","","All (*.*)",16)
                If @error Then ContinueLoop
                If Not FileExists(StringLeft($fod,StringInStr($fod,"\",0,-1)-1)) Then DirCreate(StringLeft($fod,StringInStr($fod,"\",0,-1)-1))
                GUICtrlSetData($fileinp,$fod)
        EndSwitch
    WEnd
    GUISetState(@SW_HIDE)
EndFunc   ;==>_StartSend
 
;===============================================================================
;
; Function Name:   _FileReceive
; Description::    Receives a File from an Client (See _FileSend)
; Parameter(s):   
;$sFileName [Optional]      : The Filename to save (if default or "" then using the original File Name)
;$IP [Optional]    : The IP where the Server run, Default = @IPAdress1
;$PORT [Optional]         : The Port to use (must be the same as by _FileSend!!)
;$iSplash [Optional]            : 1(defaul) = show SplashText
; Requirement(s):  -
; Return Value(s):  On Succes Return 1
;         On faild Return -1 and @error code 1-3:
;         @error = 1: Error creating Listening socket on IP
;         @error = 2: Faild to open file
;         @error = 3: Faild to write file
; Author(s):       GtaSpider
;
;===============================================================================
 
Func _FileReceive($sFileName = '', $IP = @IPAddress1, $PORT = 4324,$iSplash=1)
    Local $iMainSocket, $iAccSocket = -1, $sBuff, $sRecv = "", $i = 0, $iFirstWhile = True
    TCPStartup()
 
    $iMainSocket = TCPListen($IP, $PORT)
    If @error Then Return SetError(1,0,-1)
    If $iSplash Then $iSplash = SplashTextOn('','Wait For Incoming...',200,20,-1,-1,1)
    While $iAccSocket = -1
        $iAccSocket = TCPAccept($iMainSocket)
        Sleep(50)
    WEnd
    $sBuff = Binary ($sBuff)
   
    If $iSplash Then ControlSetText($iSplash,'','Static1','Incoming...')
   
    While $sRecv = ""
        $sRecv = TCPRecv($iAccSocket, 2048, 1)
        $sRecv = BinaryToString ($sRecv)
    WEnd
    If $iSplash Then ControlSetText($iSplash,'','Static1','Receive File...')
    While $sRecv <> ""
        If StringInStr($sRecv, ',') And $iFirstWhile Then
            $sTmp = StringLeft($sRecv, StringInStr($sRecv, ",") - 1)
            $sRecv = StringTrimLeft($sRecv, StringLen($sTmp) + 1)
            If StringLen($sFileName) < 1 Then $sFileName = $sTmp
            $iFirstWhile = False
        EndIf
        $sBuff &= $sRecv
        $sRecv = BinaryToString (TCPRecv($iAccSocket, 2048, 1))
        If @error Then ExitLoop
    WEnd
    If $iSplash Then ControlSetText($iSplash,'','Static1','Write To File...')
    If FileExists($sFileName) Then
        $sTmp = StringSplit($sFileName, ".")
        If $sTmp[0] < 2 Then
            While 1
                $i += 1
                If Not FileExists($sFileName & "(" & $i & ")") Then
                    $sFileName = $sFileName & "(" & $i & ")"
                    ExitLoop
                EndIf
            WEnd
        Else
            While 1
                $i += 1
                If Not FileExists($sTmp[1] & "(" & $i & ")" & $sTmp[2]) Then
                    $sFileName = $sTmp[1] & "(" & $i & ")." & $sTmp[2]
                    ExitLoop
                EndIf
            WEnd
        EndIf
    EndIf
    $iFileOp = FileOpen($sFileName, 16 + 2)
    If @error Then Return SetError(2,0,-1)
    FileWrite($iFileOp, $sBuff)
    If @error Then Return SetError(3,0,-1)
    FileClose($iFileOp)
    If $iSplash Then ControlSetText($iSplash,'','Static1','Succesfull!')
    TCPCloseSocket($iAccSocket)
    TCPShutdown()
    Sleep(1000)
    Return 1
EndFunc   ;==>_FileReceiveoÝ÷ Ù°¥éíý¶®¶­sb6æ6ÇVFRfÇC´uT6öç7FçG2æS2fwC° ¢b33c·6æDwVÒuT7&VFRgV÷C´6ÆVçBÒ6VæBgV÷C²Â3ÂRÂÓÂÓÂÓÂ&Dõ"b33cµu5ôUõDôôÅtäDõrÂb33cµu5ôUõDõÔõ5BÂb33cµu5ôUõtäDõtTDtR¢b33c¶çÒuT7G&Ä7&VFTçWBFG&W73ÂÂ#BÂ#Â#¤uT7G&Ä7&VFTÆ&VÂgV÷C´gV÷C²ÂÂÂ#ÂR¢b33c·÷'FçÒuT7G&Ä7&VFTçWBgV÷C³C3#BgV÷C²ÂÂcBÂ#Â#¤uT7G&Ä7&VFTÆ&VÂgV÷Cµ÷'BgV÷C²ÂÂCÂ#ÂR¢b33c¶fÆVçÒuT7G&Ä7&VFTçWBgV÷C²gV÷C²Â3bÂ#BÂ3bÂ#¤uT7G&Ä7&VFTÆ&VÂgV÷C´fÆRgV÷C²Â3bÂÂ#ÂR¢b33c·6VæF'WBÒuT7G&Ä7&VFT'WGFöâgV÷C²f×µ6VæBgV÷C²Â3bÂSbÂcbÂ32¢b33c¶fÆV6ö÷6V'WBÒuT7G&Ä7&VFT'WGFöâgV÷C²ââgV÷C²Â#Â#BÂ#Â#  ¥õ7F'E6VæB ¤gVæ2õ7F'E6VæB uT7vF6b33c·6æDwV uT6WE7FFR vÆR b33c¶ä×6rÒuTvWD×6r 7vF6b33c¶ä×6p 66Rb33c´uTôUdTåEô4Äõ4P WDÆö÷ 66Rb33c·6VæF'W@ ôfÆU6VæBuT7G&Å&VBb33c¶fÆVçÂuT7G&Å&VBb33c¶çÂuT7G&Å&VBb33c·÷'Fç WDÆö÷ 66Rb33c¶fÆV6ö÷6V'W@ b33c¶föBÒfÆT÷VäFÆörgV÷C²gV÷C²ÂgV÷C²gV÷C²ÂgV÷C´Æ¢â¢gV÷C²Ã2 bW'&÷"FVâ6öçFçVTÆö÷ uT7G&Å6WDFFb33c¶fÆVçÂb33c¶föB VæE7vF6 tVæ@ uT6WE7FFR5uôDR¤VæDgVæ2³ÓÒfwCµõ7F'E6Væ@ £³ÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓУ°£²gVæ7FöâæÖS¢ôfÆU6Væ@£²FW67&Fö㣢6VæFærfÆRFòâ6W'fW"6VRôfÆU&V6VfR£²&ÖWFW"2 £²b33c·4fÆR¢FRfÆRFò6Væ@£²b33c´¢FRF&vWBG&W70£²b33cµõ%B´÷FöæÅÒ¢FR÷'BFòW6R×W7B&RFR6ÖR2'ôfÆU&V6WfRb333²b333²£²b33c¶7Æ6´÷FöæÅÒ¢FVfVÂÒ6÷r7Æ6FW@£²ÒFöçB6÷r7Æ6FW@£²b33c¶vEvÆT6öææV7FVB´÷FöæÅÒ¢ÒbD56öææV7BfÆBW'&÷"&WGW&âvFW'&÷"6öFR £²FVfVÇBÒbD56öææV7BfÆBWBBâvÆRVçFÂ6öææV7FV@£²&WV&VÖVçB2¢Ð£²&WGW&âfÇVR2¢öâ7V66W2&WGW&⣲öâfÆB&WGW&âÓæBW'&÷"6öFRÓ3 £²W'&÷"Ò¢fÆRæ÷BW7@£²W'&÷"Ò#¢D56öææV7BfÆBöæÇ&ÆRbb33c¶vEvÆT6öææV7FVBfÇC²fwC²£²W'&÷"Ò3¢fÆBFò÷VâfÆP£²W'&÷"ÒC¢6öææV7Föç&ö&ÆVÒvÆR6VæFæp£²WF÷"2¢wF7FW £°£³ÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÐ ¤gVæ2ôfÆU6VæBb33c·4fÆRÂb33c´Âb33cµõ%BÒC3#BÂb33c¶7Æ6ÒÂb33c¶vEvÆT6öææV7FVBÒ Æö6Âb33c¶Öå6ö6¶WBÒÓÂb33c·4'VfbÂb33c¶fÆT÷Âb33c·5&V7`  bæ÷BfÆTW7G2b33c·4fÆRFVâ&WGW&â6WDW'&÷"ÂÂÓ bb33c¶7Æ6FVâb33c¶7Æ6Ò7Æ6FWDöâb33²b33²Âb33µG'Fò6öææV7Bâââb33²Â#Â#ÂÓÂÓ D57F'GW  bçVÖ&W"b33c¶vEvÆT6öææV7FVBÒFVà vÆRb33c¶Öå6ö6¶WBÒÓ b33c¶Öå6ö6¶WBÒD56öææV7Bb33c´Âb33cµõ%B tVæ@ VÇ6P b33c¶Öå6ö6¶WBÒD56öææV7Bb33c´Âb33cµõ%B bW'&÷"FVâ&WGW&â6WDW'&÷""ÂÂÓ VæD` bb33c¶7Æ6FVâ6öçG&öÅ6WEFWBb33c¶7Æ6Âb33²b33²Âb33µ7FF3b33²Âb33µ&VBfÆRâââb33² b33c¶fÆT÷ÒfÆT÷Vâb33c·4fÆRÂb bW'&÷"FVâ&WGW&â6WDW'&÷"2ÂÂÓ b33c·4'VfbÒ&æ'7G&æuG&ÔÆVgBb33c·4fÆRÂ7G&ætå7G"b33c·4fÆRÂgV÷C²b3#²gV÷C²ÂÓÂÓfײgV÷C²ÂgV÷C²fײfÆU&VBb33c¶fÆT÷ fÆT6Æ÷6Rb33c¶fÆT÷ bb33c¶7Æ6FVâ6öçG&öÅ6WEFWBb33c¶7Æ6Âb33²b33²Âb33µ7FF3b33²Âb33µ6VæFærfÆRâââb33² vÆR&æ'ÆVâb33c·4'Vfb b33c¶6VæE&WGW&âÒD56VæBb33c¶Öå6ö6¶WBÂb33c·4'Vfb bW'&÷"FVâ&WGW&â6WDW'&÷"BÂÂÓ G&Fb33²b33²Âb33c¶6VæE&WGW&â b33c·4'VfbÒ&æ'ÖBb33c·4'VfbÂb33c¶6VæE&WGW&â²Â&æ'ÆVâb33c·4'VfbÒb33c¶6VæE&WGW&â tVæ@ bb33c¶7Æ6FVâ6öçG&öÅ6WEFWBb33c¶7Æ6Âb33²b33²Âb33µ7FF3b33²Âb33µ7V66W6gVÆÂb333²b33² D56Æ÷6U6ö6¶WBb33c¶Öå6ö6¶WB D56WFF÷vâ 6ÆVW 7Æ6öfb &WGW&â¤VæDgVæ2³ÓÒfwCµôfÆU6Væ

Mfg / Best Regarsd Spider

www.AutoIt.de - Moderator of the German AutoIt Forum

 

Link to comment
Share on other sites

thanks much. i am starting to learn c++ and have realised the two launguges are very similar...

Spoiler

Admin Of:http://notmyspace.info [Under Development, looking for volunteers to help improve]http://PSNetCards.co.ukhttp://ZacnAndLindsey.com [Under development, not quite sure what to do with it yet]http://revelm.com------------------------------------Radio Streams:http://75.185.53.88:8000 [128kb/s 44kHz]http://75.185.53.88:8002 [22kb/s 22kHz](works on mobile phones)-----------------------------------My Server:Owned By: http://jumpline.comIP:66.84.19.220Bandwidth:200GBStorage Space:1TBNetwork Connection: 1GB/S[up and down]Operating System: Red Hat LinuxInstalled Apps:Webmail, phpBB, Majordomo, phpMyAdmin, MySQL, Active Server Pages, FrontPage Extensions 2002, GraphicsMagick, Mod Perl, Perl, PHP: Hypertext Preprocessor, Python(want cheap good webhosting, or need a place to park your domain? contact me)-----------------------------------

 

Link to comment
Share on other sites

  • 1 month later...
Link to comment
Share on other sites

  • 1 month later...

It's great useful for me.

Thanks very much.

But i get a problem when i transfered a pic.

The process of transferring is successful but the data is destroy.

Because i can't see anything when opening the pic.

Wait for your help.

Thanks again. :D

Link to comment
Share on other sites

I edited it to a real udf script, removed a lot of code, and the functions work in client And server:

Recieve:

; _FileRecieve($sFileName, $iAccSocket)
;
;   $sFileName = Path to the new file
;   $iAccSocket = Socket (from TCPConnect or TCPAccept)

Func _FileReceive($sFileName, $iAccSocket)
    Local $sBuff, $sRecv = "", $i = 0, $iFirstWhile = True
    
    If @error Then Return 0
    
    $sBuff = Binary ($sBuff)
    
    While $sRecv = ""
        $sRecv = TCPRecv($iAccSocket, 2048, 1)
        $sRecv = BinaryToString ($sRecv)
    WEnd
    
    While $sRecv <> ""
        If StringInStr($sRecv, ',') And $iFirstWhile Then
            $sTmp = StringLeft($sRecv, StringInStr($sRecv, ",") - 1)
            $sRecv = StringTrimLeft($sRecv, StringLen($sTmp) + 1)
            If StringLen($sFileName) < 1 Then $sFileName = $sTmp
            $iFirstWhile = False
        EndIf
        $sBuff &= $sRecv
        $sRecv = BinaryToString (TCPRecv($iAccSocket, 2048, 1))
        If @error Then ExitLoop
    WEnd
    
    $iFileOp = FileOpen($sFileName, 16 + 2)
    If @error Then Return 0
    FileWrite($iFileOp, $sBuff)
    If @error Then Return 0
    FileClose($iFileOp)
    
    Return 1
EndFunc  ;==>_FileReceive

Send:

; _FileSend($sFile, $iMainSocket)
;
;   $sFile = Path to the file to send
;   $iMainSocket = Socket (from TCPConnect or TCPAccept)

Func _FileSend($sFile, $iMainSocket)
    Local $sBuff, $iFileOp,$sRecv
    
    $iFileOp = FileOpen($sFile, 16)
    If @error Then Return 0
    $sBuff = Binary(StringTrimLeft($sFile,StringInStr($sFile,"\",-1,-1))&",")&FileRead($iFileOp)
    FileClose($iFileOp)
    
    While BinaryLen($sBuff)
        $iSendReturn = TCPSend($iMainSocket, $sBuff)
        If @error Then Return 0
        
        $sBuff = BinaryMid ($sBuff, $iSendReturn + 1, BinaryLen ($sBuff) - $iSendReturn)
    WEnd

    Return 1
EndFunc
Link to comment
Share on other sites

  • 2 weeks later...
  • 4 months later...

First I would like to say thank you for this but I'm having some issues

I transferred a file (regedit as an example) and when transferring over local LAN it worked perfect however when I transferred over the internet (all ports open) the server detected and received the file but it was less then half the correct size and obviously not working, any clue what I may have done wrong?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...