Shadowpp Posted August 24, 2007 Share Posted August 24, 2007 I am running a WINPE based boot CD (not writable, tho not sure if that applies to my problem) which contains the bmp (verified from doing a DIR) with my script in the same directory. Everything works great except my pic does not display. When I run the script on another pc running XP (full version, not PE) everything works fine. Anyone have any thoughts as to why this isnt displaying the pic? Help is greatly appreciated.....I am completely frustrated. Here is my code expandcollapse popup#include <GuiConstants.au3> ; This value must be updated whenever the script is modified Dim $Ver = "2.7" ; Declares Global variables Dim $FULL, $USERID, $COMPNAME, $TIMEZONE = "" Beep(500, 2000) #region --- GUI Window Layout --- GUICreate("Test", 415, 430, -1, -1, BitOR($WS_OVERLAPPEDWINDOW, $WS_CLIPSIBLINGS)) $Pic1 = GUICtrlCreatePic("Logo.bmp", 20, 10, 100, 100) $Label = GUICtrlCreateLabel("Unattended Windows XP Install" & @CRLF & "Non-Store" & @CRLF & "Ver. " & $Ver, 230, 20, 150, 80) GUICtrlSetFont($Label, 12, 700, "", "Comic Sans") $Combo_1 = GUICtrlCreateInput("", 20, 150, 155, 20, BitOR($ES_UPPERCASE, $ES_NUMBER)) GUICtrlSetFont($Combo_1, 10, 600, "", "Comic Sans") GUICtrlSetLimit($Combo_1, 5, 5) $Label_1 = GUICtrlCreateLabel("Enter the Asset Tag Number", 20, 130, 155, 20) $Combo_5 = GUICtrlCreateCombo("", 230, 150, 155, 20, $CBS_DROPDOWNLIST) GUICtrlSetData(-1, "Eastern Time (U.S. & Canada)|Central Time (U.S. & Canada)|Mountain Time (U.S. & Canada)|Arizona|Pacific Time (U.S. & Canada)|Alaska|Hawaii") GUICtrlSetFont($Combo_5, 10, 600, "", "Comic Sans") $Label_5 = GUICtrlCreateLabel("Pick the Time Zone", 230, 130, 155, 20) $Combo_2 = GUICtrlCreateInput("", 20, 210, 155, 20, $ES_UPPERCASE) GUICtrlSetFont($Combo_2, 10, 600, "", "Comic Sans") GUICtrlSetLimit($Combo_2, 8, 8) $Label_2 = GUICtrlCreateLabel("Enter the User ID", 20, 190, 155, 20) $Combo_6 = GUICtrlCreateCombo("", 230, 210, 155, 20, $CBS_DROPDOWNLIST) GUICtrlSetData(-1, "Albuquerque, NM - Operations|Tolson, AZ - AZ Distribution Center|Phoenix, AZ - Washington Street|Altamonte Springs, FL - Operations|Boca Raton, FL - Operations|Ft. Mills, SC - Southeast Region|Corona, CA - West Coast Region|New Orleans, LA - Operations|Tempe, AZ - Warner Crossing|Pensacola, FL - Operations|El Paso, TX - West Coast Region|Shreveport, LA - Operations|Sarasota, FL - Operations|Tampa, FL - Florida/Gulf Coast Region|Tucson, AZ - Operations") GUICtrlSetFont($Combo_6, 10, 600, "", "Comic Sans") $Label_6 = GUICtrlCreateLabel("Pick the Build Site", 230, 190, 155, 20) $Combo_3 = GUICtrlCreateInput("", 20, 270, 155, 20, $ES_UPPERCASE) GUICtrlSetFont($Combo_3, 10, 600, "", "Comic Sans") $Label_3 = GUICtrlCreateLabel("Enter the the Full Name", 20, 250, 155, 20) $Combo_7 = GUICtrlCreateCombo("", 230, 270, 155, 20, $CBS_DROPDOWNLIST) GUICtrlSetData(-1, "Denver, CO - Operations|Oklahoma City, OK - Operations|Albuquerque, NM - Operations|Tolson, AZ - AZ Distribution Center|Phoenix, AZ - Washington Street|Altamonte Springs, FL - Operations|Boca Raton, FL - Operations|Ft. Mills, SC - Southeast Region|Corona, CA - West Coast Region|New Orleans, LA - Operations|Tempe, AZ - Warner Crossing|Pensacola, FL - Operations|El Paso, TX - West Coast Region|Shreveport, LA - Operations|Sarasota, FL - Operations|Tampa, FL - Florida/Gulf Coast Region|Tucson, AZ - Operations|All Market Managers") GUICtrlSetFont($Combo_7, 10, 600, "", "Comic Sans") $Label_7 = GUICtrlCreateLabel("Pick the Destination Site", 230, 250, 155, 20) $Combo_4 = GUICtrlCreateCombo("", 20, 330, 155, 20, $CBS_DROPDOWNLIST) GUICtrlSetData(-1, "Desktop|Laptop") GUICtrlSetFont($Combo_4, 10, 600, "", "Comic Sans") $Label_4 = GUICtrlCreateLabel("Pick the Machine Type", 20, 310, 155, 20) $Button = GUICtrlCreateButton("Start Install", 160, 400, 100, 20, $BS_DEFPUSHBUTTON) #endregion --- GUI Window Layout End --- GUISetState() While 1 $msg = GUIGetMsg() Select Case $msg = $GUI_EVENT_CLOSE ExitLoop Case $msg = $Button MsgBox (0, "Results", "You pressed the button!") ExitLoop EndSelect WEnd Exit Link to comment Share on other sites More sharing options...
Shadowpp Posted August 24, 2007 Author Share Posted August 24, 2007 After much additional reading and testing I am still unable to get the pic to display. The bmp is present in the directory that the script is executing from so my understanding is that I do not required the FileInstall() command. My testing so far: 1) I compiled the script and injected it and my bmp into a WINPE CD then booted it. After booting to the WINPE CD I executed the script from the directory containing the bmp. The pic did not appear. 2) I compiled the script and injected it and my bmp into a WINPE CD then booted it. After booting to the WINPE CD I then copied the script and bmp to a RAM drive and executed the script from there. The pic did not appear. 3) I built a WINPE bootable thumbdrive and copied my script and bmp to it. After booting to the thumbdrive and executing the script the pic DID appear. GUICreate("Test", 415, 430, -1, -1, BitOR($WS_OVERLAPPEDWINDOW, $WS_CLIPSIBLINGS)) $Pic1 = GUICtrlCreatePic("Logo.bmp", 20, 10, 100, 100) Has anyone experienced this? Any suggestions? Link to comment Share on other sites More sharing options...
Zedna Posted August 24, 2007 Share Posted August 24, 2007 Try to specify full path to picture: $Pic1 = GUICtrlCreatePic(@ScriptDir & "\Logo.bmp", 20, 10, 100, 100) Resources UDF Â ResourcesEx UDF Â AutoIt Forum Search Link to comment Share on other sites More sharing options...
Shadowpp Posted August 25, 2007 Author Share Posted August 25, 2007 First off, Thank you for your assistance! I did modify my script as you advised but was met with the same result. No pic displayed. I'm beginning to wonder if this is somehow related to booting to WINPE from CD versus some read/write media (tho it seems a stretch to me) as I cannot get the pic to dislpay when booting to CD but can when booting to thumb or running on my desktop. Link to comment Share on other sites More sharing options...
Richard Robertson Posted August 25, 2007 Share Posted August 25, 2007 You said it didn't work on a RAM drive, so read/write isn't the issue here. Did you check with a FileExists to see if the script maybe can't access the file? Link to comment Share on other sites More sharing options...
Shadowpp Posted August 27, 2007 Author Share Posted August 27, 2007 While I had previously confirmed the file existed in the scriptdir via explorer, I have added the following to my script before the form displays: $FOUND = FileExists(@ScriptDir & "\Logo.bmp") If $FOUND = "1" Then MsgBox(0, "Results", "File Present") Else MsgBox(0, "Results", "File Not Present") EndIf The result was the file is detected in the @ScriptDir but the form still does not display the bmp when the script is run from within WINPE. Running the script outside of a WINPE environment results in the bmp being displayed in the form. Link to comment Share on other sites More sharing options...
Shadowpp Posted August 27, 2007 Author Share Posted August 27, 2007 Using Filemon before executing my script from the thumbdrive or from my desktop has shown that a .tmp file is created when my form displays. Captuerd when ran on desktop: nonstore.exe:2744 QUERY INFORMATION C:\DOCUME~1\spelosi\LOCALS~1\Temp SUCCESS Attributes: D nonstore.exe:2744 QUERY INFORMATION C:\DOCUME~1\spelosi\LOCALS~1\Temp\~DF5B07.tmp SUCCESS Length: 0 nonstore.exe:2744 QUERY INFORMATION C:\DOCUME~1\spelosi\LOCALS~1\Temp\~DF5B07.tmp SUCCESS Length: 512 nonstore.exe:2744 QUERY INFORMATION C:\DOCUME~1\spelosi\LOCALS~1\Temp\~DF5B07.tmp SUCCESS Attributes: A nonstore.exe:2744 LOCK C:\DOCUME~1\spelosi\LOCALS~1\Temp\~DF5B07.tmp SUCCESS Excl: Yes Offset: 2147483538 Length: 1 nonstore.exe:2744 LOCK C:\DOCUME~1\spelosi\LOCALS~1\Temp\~DF5B07.tmp SUCCESS Excl: Yes Offset: 2147483539 Length: 20 nonstore.exe:2744 UNLOCK C:\DOCUME~1\spelosi\LOCALS~1\Temp\~DF5B07.tmp SUCCESS Offset: 2147483539 Length: 20 <snipped> Captuerd when ran on Thumbdrive: nonstore.exe:928 QUERY INFORMATION X:\minint\~DFC477.tmp SUCCESS Length: 0 nonstore.exe:928 QUERY INFORMATION X:\minint\~DFC477.tmp SUCCESS Length: 512 nonstore.exe:928 QUERY INFORMATION X:\minint\~DFC477.tmp SUCCESS Attributes: A nonstore.exe:928 LOCK X:\minint\~DFC477.tmp SUCCESS Excl: Yes Offset: 2147483538 Length: 1 nonstore.exe:928 LOCK X:\minint\~DFC477.tmp SUCCESS Excl: Yes Offset: 2147483539 Length: 20 nonstore.exe:928 UNLOCK X:\minint\~DFC477.tmp SUCCESS Offset: 2147483539 Length: 20 nonstore.exe:928 LOCK X:\minint\~DFC477.tmp SUCCESS Excl: Yes Offset: 2147483559 Length: 20 <snipped> Filemon shows no .tmp file when running from my WINPE boot cd. I executed a SET command to see what the current TEMP and TMP values were for the thumbdrive and WINPE environment but nither had any value set. I am thinking that my problem is related to the creation of the tmp file - or failure to do so - when executing from the WINPE cd. Link to comment Share on other sites More sharing options...
Shadowpp Posted August 28, 2007 Author Share Posted August 28, 2007 Additional searching of the forum has turned up a solution.Hereand here Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now