Jump to content

n help about sending to web


 Share

Recommended Posts

hello, i have a ini document and i want to send some of the information in it to some where i can find it on the internet (where only i can see it) how do i do? plz come witha n example.

i need to get the Reg_Key send to some cind of server. how do i do? (it have to be an extern script that i can set into another)

and if key is accepted i will run the program)

;==============================================================================

;========= Manus-Magnus Diablo2 Lod Global MM.BOT.5.xx configuration ==========

;================= ........................................... =====================

;==============================================================================

; This file can be case sensitive, pay attention to write "Yes" and not "yes".

; All lines starting with a ";" are comments... All others are real variables.

; Commented information is important: Read all whatever is your bot experience.

;==============================================================================

[Processes]

;##############################################################################

;

; PROCESSES & KEYS USAGE

;

; * D2_Path => Specify your Diablo II path here (C:\Program Files\Diablo II)

; * D2_MultiKeys => <Yes> or <No>. If you got multiple Diablo2 keys for botting

; write Yes here and go complete the config\mm.MultiKeys.ini file. Simply!

;==============================================================================

D2_Path =C:\Program Files\Diablo II

D2_MultiKeys = No

;==============================================================================

[Extra]

;##############################################################################

;

; EXTRA DELAYS & SCRIPTS SETTINGS

;

;==============================================================================

; *Extra_CreateGameDelay => Delay in milliseconds before each game creation.

;------------------------------------------------------------------------------

Extra_CreateGameDelay = 10000

;------------------------------------------------------------------------------

; *Extra_RunsAmount => Maximum of runs before PAUSE the bot and apply the

; Extra_RunsAmountSleepTime. If you got more than 1 Cd-Keys set the bot will

; swap Keys sets each time the Extra_RunsAmount is reached!

; *Extra_RunsAmountSleepTime => This is the PAUSE Delay in minutes that apply

; once the Extra_RunsAmount is reached.

;------------------------------------------------------------------------------

Extra_RunsAmount = 30

Extra_RunsAmountSleepTime = 5

;------------------------------------------------------------------------------

; *Extra_RDGNE_SleepTime => PAUSE in minutes when IP BAN/Realm Down happen.

; NOTE: If you got more than 1 Cd-Keys set: the bot will swap Keys each time

; A IP BAN/Realm Down happen!

;------------------------------------------------------------------------------

Extra_RDGNE_SleepTime = 5

;------------------------------------------------------------------------------

; *Extra_RDGNE_Executable => Will execute this file ( example: IpReset.vbs )

; *Extra_RDGNE_ExecutablePath => Full path of this File ( example: C:\tests )

; NOTE:Executable & ExecutablePath are here for IP RESET Scripts...

;------------------------------------------------------------------------------

Extra_RDGNE_Executable = No

Extra_RDGNE_ExecutablePath = No

;------------------------------------------------------------------------------

; *Extra_D2LogsDelete => If "Yes" will delete systematicly D2 logs files...

;------------------------------------------------------------------------------

Extra_D2LogsDelete = No

;==============================================================================

; Fast help about settings above...

;==============================================================================

; CONSIDERING AROUND 1 MINUTE / RUN: (TWEAK IF YOUR RUN TIME IS DIFFERENT...)

;------------------------------------------------------------------------------

; 1/ IF YOU GOT ONLY 1 CD KEY SET:

; - Use the default settings above: the bot will make 10/ runs and sleep 15/

; minutes. If a Realm Down or IP ban happen it will sleep 20/ minutes...

; 2/ IF YOU GOT 2 CD KEY SETs: try 13/10/20

; 3/ IF YOU GOT 3 CD KEY SETs or more: 15/0/20

; 4/ IF YOU WANT TO GO MORE FAST, using IP reset script : 16+/0/0

; Note: if you got an Ip Reset Script you can setup Extra_RDGNE_SleepTime = 0

;------------------------------------------------------------------------------

; DONT FORGET THAT BLIZZARD ALLOWING A MAXIMUM OF 20 GAMES / HOUR / KEY SET...

;==============================================================================

;##############################################################################

;

; Optional scripts settings...

;

; Dedicated to third party or specific operations. Centralized in \Scripts.

; To simplify the whole things all scripts must be in the \Scripts folder, the

; working directory will be \Scripts. Example: PreLogin_Executable = Test.vbs

; Put "No" if you dont wanna use the option. Note: RUN WAIT is done.

;==============================================================================

; *PreLogin_Executable => Will be executed just before click "Connect to Bnet".

;------------------------------------------------------------------------------

PreLogin_Executable = No

;------------------------------------------------------------------------------

; *PostLogin_Executable => Will be executed after character selection.

;------------------------------------------------------------------------------

PostLogin_Executable = No

;------------------------------------------------------------------------------

; *GameStart_Executable => Will be executed at the very start of each new game.

; Only the corpse check/recovery and optional Server IP check are done before.

;------------------------------------------------------------------------------

GameStart_Executable = No

;==============================================================================

[Character]

;##############################################################################

;

; GLOBAL CHARACTER & GAME PARAMETERS

;

; * Char_Mode => Mode <Single> for single player or <Battle> for battle.net.

; ==> <SEQ> special mode will help for sequences building: the bot will

; directly run the sequences that are in the mm.BOT.Sequences.ini file. Thats

; means you have launch Diablo 2 yourself (via a shortcut with the correct

; parameters: -direct -txt -w -ns -title "Diablo II" ) and to put your char

; just after the desired TP or WP. Once done; launch the mm.bot.5xx.exe.

; * Char_Account => Your account (Only required if <Battle> mode selected)

; * Char_Password => Your password (Only required if <Battle> mode selected)

; * Char_Slot => Character position in account screen (<1> to <8>)

; * Char_Difficulty => Difficulty: <Normal>, <Nightmare> or <Hell>

; * Char_BNGamePass_String => Suit of keys the bot will use randomly

; to create your games names and passes. You can put the same key multiple

; times (not too much). Set 20+ characters, Personalize it, dont use spaces.

; * Char_BNGameName_Perso => If the parameter is different than "No" the bot

; will take the passed string adding incremented number behind it (1,2..etc..)

; as the new game name creation string, ignoring Char_BNGamePass_String.

; Char_BNGamePass_Perso => Will take this string as default game password

; if Char_BNGameName_Perso is different than "No"... Attention: Personalized

; Game Pass must contains more than 2 alpha numeric characters (a-z / 0-9)

; * Char_MessageSent => /dnd is recommended since messages from wispers have

; colors that -will- disturb the bot! Will be applied at each new cycle.

; Default is here /o igw that should be used with the \tools\FList utility.

; * Char_StartRunDelay => Hightly randomised delay at the absolute start of

; each run, when -in game- status is detected. (50-150)

;==============================================================================

Char_Mode = Battle

Char_Account =

Char_Password =

Char_Slot = 1

Char_Difficulty = Nightmare

Char_BNGamePass_String = 123456789-abcdefghijklmnopqrstuvwxyz

Char_BNGameName_Perso = No

Char_BNGamePass_Perso = No

Char_MessageSent = /dnd

Char_StartRunDelay = 150

;==============================================================================

[Key]

Reg_Key = xxxxxxxxxxx

;##############################################################################

;

; LIFE AND MERC PREFERENCES

;

; * Char_MalahHealLifePercent AND Char_MalahHealManaPercent => The life or

; Mana needed to heal at Heal NPC (10% step precision, minimum 10% mana,

; less than 10% will make the bot ignore mana need, and minimum 50% for life)

; * Char_DrinkPotionLifePercent AND Char_DrinkPotionManaPercent => The Life or

; Mana percent needed to drink Potion (10% step precision....)

; * Char_UseMerc => Detect and ressurrect merc if dead <Yes> or <No>

; * Char_HealMerc => Will gave rejuv to merc if life is ~1/3 <Yes> or <No>

; * Char_PreventiveChicken => Chicken if, after a drink the bot see there

; is only 1 column of potions left ? <Yes> or <No>

; * Char_StopIfNoPots => Stop the bot if no more pots in belt ? <Yes> or <No>

; * Char_MaxDrinks => Maximum of drinks allowed per sequence (ie: Eldritch

; attack sequence) if this number is overrided the bot will chicken.

; * Char_CharHealTimer => Minimum time interval in ms between 2 char drinks.

; * Char_MercHealTimer => Minimum time interval in ms between 2 merc drinks.

; * Char_MercWeaponSwitch => Will switch merc weapon when resurrect (infinity!)

;==============================================================================

Char_MalahHealLifePercent = 90

Char_MalahHealManaPercent = 90

Char_DrinkPotionLifePercent = 40

Char_DrinkPotionManaPercent = 20

Char_UseMerc = Yes

Char_HealMerc = Yes

Char_PreventiveChicken = Yes

Char_StopIfNoPots = No

Char_MaxDrinks = 4

Char_CharHealTimer = 400

Char_MercHealTimer = 800

Char_MercWeaponSwitch = Yes

;==============================================================================

;##############################################################################

;

; GAMBLE & DIABLO CLONE PREFERENCES

;

; * Char_StashGold => How much in inventory before stashing it ?

; * Char_GambleItem => Gambled item can be <Rings> OR <Amulets> OR <Circlets>

; * Char_GambleGoldStart => Gold amount to start gamble at Gamble NPC

; * Char_GambleGoldStop => Gold amount to stop gamble at Gamble NPC (>200k)

; * Char_GambleDelay => Delay before scan & iding, dont go below 800...

;==============================================================================

; * Char_IpFinderLastByte1,2,3 => Last byte of the server you are looking for.

; If good server is detected the bot will repeat the Precast Sequence Over &

; Over: thats means you need to have "cast in town" sequence to allow IDLE.

; As example Holy shield for pala, frozen armor for sorce, or others... Usage

; is No to ALL if you are NOT looking for a specific server. However put simple

; Bytes (ie: 66) if you search server(s). You can check up to 3 different IP.

; * Char_IpFinderExecutable => Name of the executable/script to launch when IP

; is found. (ie: MyWav.wav or MyScript.bat...)

; * Char_IpFinderExecutablePath => full path of the executable (ie: C:\MyFolder)

; NOTE: D2 window is re-maximized once your script/wav terminated to properly

; continue the IDLE using Precast to prevent bot focuse loose. Dont use a script

; or sound that runs too long. If ip found splash screen will spawn automaticly.

; NOTE: Make D2Clone appears at Eldtich and carry him to Shenk (easy kill).

;==============================================================================

Char_StashGold = 300000

Char_GambleItem = Amulets

Char_GambleGoldStart = 55000000

Char_GambleGoldStop = 300000

Char_GambleDelay = 1200

;==============================================================================

Char_IpFinderLastByte1 = No

Char_IpFinderLastByte2 = No

Char_IpFinderLastByte3 = No

Char_IpFinderExecutable = No

Char_IpFinderExecutablePath = No

;==============================================================================

;##############################################################################

;

; DEFAULT INVENTORY & REPAIR PREFERENCES

;

; * Char_MiniFreeSpaces => At how much free spaces letf in inventory the bot

; will stop. Never let the bot continue to run while inventory & stash are full.

; NOTE: If you make multiple monsters and pickup rare you should have 24+ !

; If you are only pickup few uniques you can decrease the value to 12-16.

;==============================================================================

; * Char_ForceRepairCycle => Will force a repair to Larzuk every xx runs.

; If value = 0 auto check repair is activated at the start of each run.

; Damaged armors/Helms/etc... And -melee- weapons are automaticly detected.

; Its recommended to force/define a cycle, since the auto check burn ~500 ms

; If you have a sorce give 100 (repair every 100 runs...It's an example.)

;==============================================================================

Char_MiniFreeSpaces = 24

;==============================================================================

Char_ForceRepairCycle = 150

;==============================================================================

;##############################################################################

;

; KEYBOARD SETTINGS/KEYS

;

; * Char_Key_ClearScreen => The key for "clear screen" (look in controls)

; * Char_Key_Switch => The key you use to switch weapons (CTA or Eshield Switch)

; * Char_Key_AutoMap => The keyboard key you use to show the automap

; * Char_Key_Inventory => The keyboard key you use to view inventory

; * Char_Key_ShowItems => The keyboard key you use to view items on the floor

; * Char_Key_PotionsRow1 => Key for Potion 1 (from left to right)

; * Char_Key_PotionsRow2 => Key for Potion 2 (from left to right)

; * Char_Key_PotionsRow3 => Key for Potion 3 (from left to right)

; * Char_Key_PotionsRow4 => Key for Potion 4 (from left to right)

; NOTE : Example of keys: <SPACE>, <SHIFT>, <ALT>, <CTRL>, <F1>, <z>, <6>...

; NOTE : Use -simple- keys like SPACE or a, b, c, z.. instead of F1, F2, ALT

; if you are experiencing problems. Because -simple- keys can be more 'fast'.

; NOTE : Only rejuvenations potions are picked & recongnized by the BOT

; => Fill up the belt with REJUV / FULL REJUV potions before launching the bot.

; => If you want only drink full rejuvs edit the Xrare section of mm.PkId.ini.

;==============================================================================

Char_Key_ClearScreen = SPACE

Char_Key_Switch = w

Char_Key_AutoMap = TAB

Char_Key_Inventory = i

Char_Key_ShowItems = ALT

Char_Key_PotionsRow1 = 1

Char_Key_PotionsRow2 = 2

Char_Key_PotionsRow3 = 3

Char_Key_PotionsRow4 = 4

Char_Key_ShowBelt = ~

;==============================================================================

[Advanced Settings]

;##############################################################################

;

; MOUSE AND KEYBOARD DIABLO 2 DELAYS/SENSIVITY

;

; If you dont know leave these settings as default.

; * (A)D2_FastClickDelaysRange = <mini>,<maxi> => Fast Clicks are most "actions"

; clicks like attacks, moves, hide mouse...etc.. this is the randomized time

; from <mini> to <maxi> in milliseconds mouse will be pressed: down,delay,up.

; * (B)D2_SlowClickDelaysRange = <mini>,<maxi> => Slow Clicks category, same thing

; as above, but this concern only slow speed required delays like out-of-game

; menus, Npc menus, repair button...etc...

; * ©D2_MouseClickDownDelay => Length a click is held down before release (ms).

; This delay is the autoit minimum press time for all clicks.

; * (D)D2_SendKeyDownDelay => Length a key is held down before release (ms).

; This delay is the autoit minimum press time for all keys.

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

; All these delays can be tweaked to fix problems OR to increase performances:

; => Total Click time = © + (A OR :) + little value (internal & randomized)

; => Total Press Key time = (D) + little value (internal & randomized)

; D2 game have a worst sensivity for clicks and keypresses on low speed comps.

; Increasing a few © or/and (D) if you think the game does not receive

; properly the clicks/keys orders, Also search around for all others settings

; like delays in sequences.

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

; Test these delays if you need speed: A = 10,15, B = 120,140, C & D = 15

;==============================================================================

D2_FastClickDelaysRange = 20,30

D2_SlowClickDelaysRange = 120,140

D2_MouseClickDownDelay = 20

D2_SendKeyDownDelay = 20

;==============================================================================

;##############################################################################

;

; INTERACTS DELAYS

;

; If you dont know leave these settings as default.

; * Char_CheckMoveDelay => End of move detection Delay; more is low, more it

; will increase moves reactivity. If too much low the interacts or moves can

; become erratics...(milliseconds). Only concern walk/run moves

; - Try - values starting from 80 to 300 with steps of 20

; NOTE: Char_CheckMoveDelay IS AN IMPORTANT FACTOR OF OPTIMIZATION !!

; * ItemFocusDelay => time to wait before starting an iding scan, too much low

; delay can cause iding errors, too much high is time loss. >5 and <200.

; Usually is as low as computer is fast.

; * Weot_MiniDelay => When using the WEOT command: Minimum delay to wait before

; starting to check if the teleport was done or not. >300 and <800

; * Weot_ScanDelay => When using the WEOT command: Delay between each scan. A

; scan serve to check if teleport was effective or not. >40 and <500

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

; Test this delay if you need speed: Char_CheckMoveDelay = 100

; If you got a sorce with fast cast rate test this: Weot_MiniDelay = 350

;==============================================================================

Char_CheckMoveDelay = 120

ItemFocusDelay = 70

Weot_MiniDelay = 600

Weot_ScanDelay = 100

;==============================================================================

;##############################################################################

;

; MISC & SPECIAL OPTIONS (some of them deserve support)

;

; If you dont know leave these settings as default.

;

; * BotProcessPriority => can be: Normal or Medium or High; default is medium

; but you can select High if you need more iding & pickit speed.

; ATTENTION: This option boost seriously the bot and all delays are impacted.

; * D2_RunStartKey => You can specify a Key that will be pressed at the

; start of each run. Designed to clear all messages from MapHack or any module.

; Must be done when third programs/hacks are used and disturb the bot due to

; screen messages. Leave it to <No> to dont use this option.

; * Misc_ByPassCheckCorpse => ByPass the Check of Corpse <Yes> ONLY if you are

; immortal... Maybe HC. This one will cute ~500 ms of game run time.

; * D2_PickitRescans => number of screen scans after the last pickup (pickit)

; * D2_PickitMaxRetries => max number of clicks done in a whole pickit action.

; * D2_SlowIntMDelay => Mouse Move speed for slow actions (fastest is 0)

; * D2_FastIntMDelay => Mouse Move speed for fast actions (fastest is 0)

; * D2_IdingMouseSpeed => Same thing as D2_Slow/FastIntMDelay usually at the

; same speed than D2_FastIntMDelay, But if you get iding errors set it to 2.

; * D2_MouseClickDelay => Length of the brief pause in between mouse clicks.

; * D2_SendKeyDelay => Length of the brief pause in between sent keystrokes.

; * LogScanDrop => <Yes> or <No> Will log all scanned on the grounds.

; * LogPicked => <Yes> or <No> Will log all picked/clicked on the ground items.

; * LogSold => <Yes> or <No> Will log all sold items and their statistics.

; * SleepMouseMoves => <Yes> or <No> If yes will move the mouse while sleep.

; * D2_WName => Name of the Diablo II window that the bot will look for.

; * D2_Executable => Name the the Diablo II executable file.

; * D2_CmdParameters => Diablo II executable parameters.

; * D2_SplashBotTitle => Defaut title you want for the bot splash window.

; * Bot_STOP_HotKey => HotKey that stop the bot, default is END

; * Bot_PAUSE_HotKey => HotKey that pause the bot, default is PAUSE

; * Bot_INILOAD_HotKey => HotKey that load .ini settings, default is INS

; (Insert key): Near all settings are reloaded, include PkId & Sequences !

; Note: Do not execute the INILOAD while attacking monsters...

;==============================================================================

BotProcessPriority = Medium

D2_RunStartKey = No

Misc_ByPassCheckCorpse = No

D2_PickitRescans = 1

D2_PickitMaxRetries = 8

D2_SlowIntMDelay = 2

D2_FastIntMDelay = 1

D2_IdingMouseSpeed = 1

D2_MouseClickDelay = 5

D2_SendKeyDelay = 5

LogScanDrop = Yes

LogPicked = Yes

LogSold = Yes

SleepMouseMoves = Yes

D2_WName = Diablo II

D2_Executable = Diablo II.exe

D2_CmdParameters = -w -ns -lq -direct -txt -title "Diablo II"

D2_SplashBotTitle =

Bot_STOP_HotKey = END

Bot_PAUSE_HotKey = PAUSE

Bot_INILOAD_HotKey = INS

MMstatusURL = http://www.-x?x-.net/modules/MMstatus/MMstatus.ini

MMnewsURL = http://www.-?x?-.net/modules/MMstatus/MMnews.ini

Version =5.44

;==============================================================================

i need to get the Reg_Key send to some cind of server. how do i do? (it have to be an extern script that i can set into another)

and if key is accepted i will run the program)

Char_BNGameName_Perso = No

Char_BNGamePass_Perso = No

Char_MessageSent = /dnd

Char_StartRunDelay = 150

;==============================================================================

[Key]

Reg_Key = xxxxxxxxxxx

;##############################################################################

;

; LIFE AND MERC PREFERENCES

;

; * Char_MalahHealLifePercent AND Char_MalahHealManaPercent => The life or

; Mana needed to heal at Heal NPC (10% step precision, minimum 10% mana,

; less than 10% will make the bot ignore mana need, and minimum 50% for life)

Link to comment
Share on other sites

If you make *any* attempt at coding this yourself I will help. Oh, and also as long as you never post another several hundred line INI again.

Post the relevant parts and ask specific questions. It helps others help you.

Link to comment
Share on other sites

  • 2 months later...

i wanna know how to write a script for a macro key...

how do i input delays?

this wat i got so far.. but precast was too fast in d2 for chilling armor and battle order and such.... it looks like i scroll a mouse then bnet kicks me out of game...

Send, {F1}

delay 900

MouseClick, right, 176, 430

delay 900

Send, w

delay 900

Send, {F5}

delay 900

MouseClick, right, 176, 430

delay 900

Send, {F6}

delay 900

MouseClick, right, 176, 430

delay 900

Send, {F7}

delay 900

MouseClick, right, 176, 430

delay 900

Send, w

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...