Kademlia Posted February 4, 2008 Share Posted February 4, 2008 (edited) Yea, a simple question:Is it possible to change the Microphone Input Volume via the DllCall("winmm.dll" [...])?Just can´t get it to work.Everything i can get is Output volume and which inputdevice should be selected; not the volume. Edited February 4, 2008 by Kademlia Link to comment Share on other sites More sharing options...
Zedna Posted February 8, 2008 Share Posted February 8, 2008 Look here for useful links Resources UDF ResourcesEx UDF AutoIt Forum Search Link to comment Share on other sites More sharing options...
Kademlia Posted February 13, 2008 Author Share Posted February 13, 2008 (edited) Thanks for the answer but i already checked those links. My mainproblem is controling the Input Microphone Volume (and if possible setting the Micboost). As most Computers i got to see use OnboardSonund and "Realtek AC97 Audio" is often used i can´t get around optimizing for that device. The Mainproblem here is: None of the Scripts if found were able to change the Input Volume. Only the Output. Here are some examples of the structure of Mixerdevices i got from some friends (computerlanguage:german) I tried to sneak around this problem with the "VolumeLine" tool but this is just a realy bad way so i will try again on the DllCalls. CODEVolumeLine version 1.0 © 2002 by Slava Glory, Omsk, Russia ------------------------------------------------------------ [mixer:0] Conexant HD Audio output [group:0] Lautstärkeregelung [control:-1] Master Volume volume:100% mute:off Master Volume [control: 0] Wave volume: 44% mute:off Wave [control: 1] SW-Synthesizer volume:100% mute:off SW-Synthesizer [control: 2] CD-Audio volume:100% mute:off CD-Audio [control: 3] Line-Eingangslautstärkevolume:100% mute:off Line-Eingangslautstärke [control: 4] Mikrofon-Eingangslautstärkevolume: 86% mute:off Mikrofon-Eingangslautstärke [control: 5] PC-Lautsprecher volume: 0% mute:on PC-Lautsprecher [mixer:1] Conexant HD Audio input [group:0] Aufnahme [control:-1] Master Volume volume: 0% mute:on Master Volume [control: 0] CD-Audio volume: 50% select:off CD-Audio [control: 1] Mikrofon volume: 0% select:off Mikrofon [control: 2] Line-In volume: 50% select:off Line-In [control: 3] Waveausg.-Mix volume: 78% select:on Waveausg.-Mix CODEVolumeLine version 1.0 © 2002 by Slava Glory, Omsk, Russia ------------------------------------------------------------ [mixer:0] Realtek AC97 Audio [group:0] Lautstärkeregelung [control:-1] Master Volume volume:100% mute:off [control: 0] Wave volume: 12% mute:off [control: 1] SW-Synthesizer volume:100% mute:off [control: 2] Front volume:100% mute:on [control: 3] Subwoofer volume:100% mute:on [control: 4] Center volume:100% mute:on [control: 5] Rear volume:100% mute:on [control: 6] SPDIF volume: 0% mute:off [control: 7] Aux volume: 50% mute:off [control: 8] TV-Empfänger (Audio)volume: 50% mute:off [control: 9] CD-Player volume: 16% mute:off [control:10] Line-In volume: 50% mute:off [control:11] Mikrofon volume: 45% mute:on [control:12] Telefonleitung volume: 50% mute:off [control:13] PC-Lautsprecher volume: 50% mute:off [group:1] Aufnahme [control: 0] Mono Mix volume: 7% select:off [control: 1] Stereo Mix volume: 7% select:off [control: 2] SPDIF volume: 0% mute:on [control: 3] Aux volume: 7% select:off [control: 4] TV-Empfänger (Audio)volume: 7% select:off [control: 5] CD-Player volume: 7% select:off [control: 6] Line-In volume: 7% select:off [control: 7] Mikrofon volume: 92% select:on [control: 8] Telefonleitung volume: 7% select:off CODEVolumeLine version 1.0 © 2002 by Slava Glory, Omsk, Russia ------------------------------------------------------------ [mixer:0] Realtek HD Audio output [group:0] Summe [control:-1] Master Volume volume: 56% mute:off [control: 0] Wave volume: 84% mute:off [control: 1] SW-Synthesizer volume: 57% mute:off [control: 2] CD-Player volume: 76% mute:off [control: 3] Mikrofon volume: 22% mute:off [control: 4] PC Beep volume: 34% mute:off [mixer:1] Realtek HD Audio input [group:0] Aufnahme [control:-1] Master Volume volume: 72% mute:off [control: 0] Mikrofon volume: 0% mute:off [control: 1] Stereomix volume: 0% mute:on CODEVolumeLine version 1.0 © 2002 by Slava Glory, Omsk, Russia ------------------------------------------------------------ [mixer:0] Realtek AC97 Audio [group:0] Lautstärkeregelung [control:-1] Master Volume volume:100% mute:off Master Volume [control: 0] Wave volume:100% mute:off Wave [control: 1] SW-Synthesizer volume:100% mute:off SW-Synthesizer [control: 2] Front volume:100% mute:on Front [control: 3] Side volume:100% mute:on Side [control: 4] Subwoofer volume:100% mute:on Subwoofer [control: 5] Center volume:100% mute:on Center [control: 6] Rear volume:100% mute:on Rear [control: 7] SPDIF volume: 0% mute:off SPDIF [control: 8] CD-Player volume: 88% mute:off CD-Player [control: 9] Line-In volume:100% mute:off Line-In [control:10] Mikrofon volume: 33% mute:on Mikrofon [control:11] Telefonleitung volume: 50% mute:off Telefonleitung [control:12] PC-Lautsprecher volume: 28% mute:off PC-Lautsprecher [group:1] Aufnahme [control: 0] Mono Mix volume: 7% select:off Mono Mix [control: 1] Stereo Mix volume: 47% select:off Stereo Mix [control: 2] SPDIF volume: 0% mute:on SPDIF [control: 3] CD-Player volume:100% select:off CD-Player [control: 4] Line-In volume:100% select:off Line-In [control: 5] Mikrofon volume: 32% select:on Mikrofon [control: 6] Telefonleitung volume: 7% select:off Telefonleitung Edited February 13, 2008 by Kademlia Link to comment Share on other sites More sharing options...
Kademlia Posted February 13, 2008 Author Share Posted February 13, 2008 (edited) And the Mixer.au3 from GaryFrost mentioned here:http://www.autoitscript.com/forum/index.ph...st&p=264605only returns:CODE;~ DST;~ Digital: 0;~ Line: 0;~ Monitor: 0;~ Speakers: 75;~ HeadPhones: 0;~ Phone: 0;~ WaveIn: 0;~ VoiceIn: 0;~ SRC;~ Digital: 0;~ Line: 0;~ Microphone: 54 <- this is OUTPUT microphone;~ Synthesizer: 100;~ CompactDisc: 0;~ Phone: 0;~ PcSpeaker: 0;~ WaveOut: 96;~ Aux: 0;~ Analog: 100Edit: Got it...damn these DLLs nearly killed me Edited February 14, 2008 by Kademlia Link to comment Share on other sites More sharing options...
DavidRogers Posted February 15, 2008 Share Posted February 15, 2008 Hi there, I am trying to find a way of setting the Microphone record or Input setting and have failed. When you say, "Got it", HOW?????? Best regards, David Link to comment Share on other sites More sharing options...
Kademlia Posted February 15, 2008 Author Share Posted February 15, 2008 (edited) I only got the half way, i tought no one was interested so i stopped posting about this topic.I need to be able to to two things:1. Change Mic volume2. Change MIC Boost ON/OFF (This is more important because on most computers you will nearly not hear a person speaking just by changing Mic volume to 100%)to 1: I managed to get he IDs of the InputLines. I stopped at that point because i knew changing the MIC BOOST is more difficult. So i started working there. You can see the IDs for the INPUTLines by doing this to MXSelectInputSrc.au3CODEFunc GetLineConnectionsNames(ByRef $mixers,ByRef $mxInList,$index) Local $i,$x,$n,$hmxobj,$ret If $mixers[0][0] Then $hmxobj=$mixers[$index][$MIX_HMXOBJ] $x=0 For $n=0 To $mixers[$index][$MIX_CCONNECTIONS]-1 zeroline($mxline) $mxline[$dwDestination]=$mixers[$index][$MIX_DWLINEID] $mxline[$dwSource]=$n $ret=MixerGetLineInfo($hmxobj,$mxline,BitOR($MIXER_OBJECTF_HMIXER,$MIXER_GETLINEINFOF_SOURCE)) ;ask for source lines If NOT @error Then $mxInList[$x][$lst_destname]=$mxline[$szName] & " ID= " & $mxline[4] $mxInList[$x][$lst_dwComponentType]=$mxline[$dwComponentType] $x=$x+1 If UBound($mxInList)<$x+1 Then ReDim $mxInList[$x+2][uBound($mxInList,2)] Else SetError(1) Return False EndIf Next ;n $mxInList[0][0]=$x Return True Else SetError(1) Return False EndIfEndFunc2: Tried a long time...but i just cant get it to work - i compared with some examples at codeproject, at expert-exchange aso... just don´t know whats going wrongThe code i tried to port can be found here (bottom of page): http://www.experts-exchange.com/Programmin...l?eeSearch=trueI added this to MXSelectInputSrc_include.au3CODEConst $MIXERCONTROL_CT_CLASS_SWITCH =0x20000000Const $MIXERCONTROL_CT_SC_SWITCH_BOOLEAN = 0Const $MIXERCONTROL_CONTROLTYPE_BOOLEAN = BitOR($MIXERCONTROL_CT_CLASS_SWITCH , $MIXERCONTROL_CT_SC_SWITCH_BOOLEAN , $MIXERCONTROL_CT_UNITS_BOOLEAN)Const $MIXERCONTROL_CONTROLTYPE_ONOFF = ($MIXERCONTROL_CONTROLTYPE_BOOLEAN + 1)Const $MIXERCONTROL_CONTROLTYPE_MUTE = ($MIXERCONTROL_CONTROLTYPE_BOOLEAN + 2)Const $MIXERCONTROL_CONTROLTYPE_MONO = ($MIXERCONTROL_CONTROLTYPE_BOOLEAN + 3)Const $MIXERCONTROL_CONTROLTYPE_LOUDNESS = ($MIXERCONTROL_CONTROLTYPE_BOOLEAN + 4)Const $MIXERCONTROL_CONTROLTYPE_STEREOENH = ($MIXERCONTROL_CONTROLTYPE_BOOLEAN + 5)Attached the not working Micboost :-/Start it and click "TEST" - you will get a consoleoutput including the ControlID. But im not able to change the setting always getting an error (11).MicBoost_notworking.au3 Edited February 15, 2008 by Kademlia Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now