FireLordZi Posted February 16, 2008 Share Posted February 16, 2008 (edited) I'm using XSkin and just added scroll bar functionality to my program but the scrollbars are on the "outside" of the XSkin window. What is the cause of this and how do I get the scroll bar on the inside of the skin? Edited February 16, 2008 by FireLordZi While Alive() { DrinkWine(); }AutoIt Programmer Link to comment Share on other sites More sharing options...
FireLordZi Posted February 17, 2008 Author Share Posted February 17, 2008 bump While Alive() { DrinkWine(); }AutoIt Programmer Link to comment Share on other sites More sharing options...
BrettF Posted February 17, 2008 Share Posted February 17, 2008 (edited) Took a while... But it works expandcollapse popup;Scrollable Child GUI with XSkin example by Bert. ; To run, use the LATEST BETA! #include <XSkin.au3> #include <WindowsConstants.au3> #include <StructureConstants.au3> #include <GUIScrollBars.au3> #include <ScrollBarConstants.au3> #include <GUIConstantsEx.au3> ; folder of skin $Skin_Folder = @ScriptDir & "\Skins\Black-Yellow" Opt("MustDeclareVars", 1) _Main() Func _Main() Local $nFileMenu, $nExititem, $GUIMsg, $hGUI, $h_cGUI, $h_cGUI2 Local $listview, $button, $button2 GUIRegisterMsg($WM_SIZE, "WM_SIZE") $hGUI = XSkinGUICreate("My GUI", 400, 400, $Skin_Folder) $h_cGUI = GUICreate("Child GUI 1", 295, 295, 50, 50, BitOR($WS_CHILD,$WS_HSCROLL,$WS_VSCROLL), $WS_EX_CLIENTEDGE, $hGUI) GUISetBkColor(0X006400) $listview = GUICtrlCreateListView("col1 |col2|col3 ", 10, 10, 200, 150);,$LVS_SORTDESCENDING) $button = GUICtrlCreateButton("Value?", 75, 170, 70, 20) For $x = 1 To 30 GUICtrlCreateListViewItem("item" & $x & "|col2|col3", $listview) Next GUISetState(@SW_SHOW, $h_cGUI) GUISwitch($hGUI) GUIRegisterMsg($WM_VSCROLL, "WM_VSCROLL") GUIRegisterMsg($WM_HSCROLL, "WM_HSCROLL") GUISetState(@SW_SHOW, $hGUI) _GUIScrollBars_Init($h_cGUI) Local $RangeMinMax = _GUIScrollBars_GetScrollRange($h_cGUI, $SB_VERT) ConsoleWrite("Vert Min/Max: " & $RangeMinMax[0] & "/" & $RangeMinMax[1] & @LF) $RangeMinMax = _GUIScrollBars_GetScrollRange($h_cGUI, $SB_HORZ) ConsoleWrite("Horz Min/Max: " & $RangeMinMax[0] & "/" & $RangeMinMax[1] & @LF) While 1 $GUIMsg = GUIGetMsg() Switch $GUIMsg Case $GUI_EVENT_CLOSE ExitLoop EndSwitch WEnd Exit EndFunc ;==>_Main Func WM_SIZE($hWnd, $Msg, $wParam, $lParam) #forceref $Msg, $wParam Local $index = -1, $yChar, $xChar, $xClientMax, $xClient, $yClient, $ivMax For $x = 0 To UBound($aSB_WindowInfo) - 1 If $aSB_WindowInfo[$x][0] = $hWnd Then $index = $x $xClientMax = $aSB_WindowInfo[$index][1] $xChar = $aSB_WindowInfo[$index][2] $yChar = $aSB_WindowInfo[$index][3] $ivMax = $aSB_WindowInfo[$index][7] ExitLoop EndIf Next If $index = -1 Then Return 0 Local $tSCROLLINFO = DllStructCreate($tagSCROLLINFO) ; Retrieve the dimensions of the client area. $xClient = BitAND($lParam, 0x0000FFFF) $yClient = BitShift($lParam, 16) $aSB_WindowInfo[$index][4] = $xClient $aSB_WindowInfo[$index][5] = $yClient ; Set the vertical scrolling range and page size DllStructSetData($tSCROLLINFO, "fMask", BitOR($SIF_RANGE, $SIF_PAGE)) DllStructSetData($tSCROLLINFO, "nMin", 0) DllStructSetData($tSCROLLINFO, "nMax", $ivMax) DllStructSetData($tSCROLLINFO, "nPage", $yClient / $yChar) _GUIScrollBars_SetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO) ; Set the horizontal scrolling range and page size DllStructSetData($tSCROLLINFO, "fMask", BitOR($SIF_RANGE, $SIF_PAGE)) DllStructSetData($tSCROLLINFO, "nMin", 0) DllStructSetData($tSCROLLINFO, "nMax", 2 + $xClientMax / $xChar) DllStructSetData($tSCROLLINFO, "nPage", $xClient / $xChar) _GUIScrollBars_SetScrollInfo($hWnd, $SB_HORZ, $tSCROLLINFO) Return $GUI_RUNDEFMSG EndFunc ;==>WM_SIZE Func WM_HSCROLL($hWnd, $Msg, $wParam, $lParam) #forceref $Msg, $lParam Local $nScrollCode = BitAND($wParam, 0x0000FFFF) Local $index = -1, $xChar, $xPos Local $Min, $Max, $Page, $Pos, $TrackPos For $x = 0 To UBound($aSB_WindowInfo) - 1 If $aSB_WindowInfo[$x][0] = $hWnd Then $index = $x $xChar = $aSB_WindowInfo[$index][2] ExitLoop EndIf Next If $index = -1 Then Return 0 ;~; Get all the horizontal scroll bar information Local $tSCROLLINFO = _GUIScrollBars_GetScrollInfoEx($hWnd, $SB_HORZ) $Min = DllStructGetData($tSCROLLINFO, "nMin") $Max = DllStructGetData($tSCROLLINFO, "nMax") $Page = DllStructGetData($tSCROLLINFO, "nPage") ; Save the position for comparison later on $xPos = DllStructGetData($tSCROLLINFO, "nPos") $Pos = $xPos $TrackPos = DllStructGetData($tSCROLLINFO, "nTrackPos") #forceref $Min, $Max Switch $nScrollCode Case $SB_LINELEFT; user clicked left arrow DllStructSetData($tSCROLLINFO, "nPos", $Pos - 1) Case $SB_LINERIGHT; user clicked right arrow DllStructSetData($tSCROLLINFO, "nPos", $Pos + 1) Case $SB_PAGELEFT; user clicked the scroll bar shaft left of the scroll box DllStructSetData($tSCROLLINFO, "nPos", $Pos - $Page) Case $SB_PAGERIGHT; user clicked the scroll bar shaft right of the scroll box DllStructSetData($tSCROLLINFO, "nPos", $Pos + $Page) Case $SB_THUMBTRACK; user dragged the scroll box DllStructSetData($tSCROLLINFO, "nPos", $TrackPos) EndSwitch ;~ // Set the position and then retrieve it. Due to adjustments ;~ // by Windows it may not be the same as the value set. DllStructSetData($tSCROLLINFO, "fMask", $SIF_POS) _GUIScrollBars_SetScrollInfo($hWnd, $SB_HORZ, $tSCROLLINFO) _GUIScrollBars_GetScrollInfo($hWnd, $SB_HORZ, $tSCROLLINFO) ;// If the position has changed, scroll the window and update it $Pos = DllStructGetData($tSCROLLINFO, "nPos") If ($Pos <> $xPos) Then _GUIScrollBars_ScrollWindow($hWnd, $xChar * ($xPos - $Pos), 0) Return $GUI_RUNDEFMSG EndFunc ;==>WM_HSCROLL Func WM_VSCROLL($hWnd, $Msg, $wParam, $lParam) #forceref $Msg, $wParam, $lParam Local $nScrollCode = BitAND($wParam, 0x0000FFFF) Local $index = -1, $yChar, $yPos Local $Min, $Max, $Page, $Pos, $TrackPos For $x = 0 To UBound($aSB_WindowInfo) - 1 If $aSB_WindowInfo[$x][0] = $hWnd Then $index = $x $yChar = $aSB_WindowInfo[$index][3] ExitLoop EndIf Next If $index = -1 Then Return 0 ; Get all the vertial scroll bar information Local $tSCROLLINFO = _GUIScrollBars_GetScrollInfoEx($hWnd, $SB_VERT) $Min = DllStructGetData($tSCROLLINFO, "nMin") $Max = DllStructGetData($tSCROLLINFO, "nMax") $Page = DllStructGetData($tSCROLLINFO, "nPage") ; Save the position for comparison later on $yPos = DllStructGetData($tSCROLLINFO, "nPos") $Pos = $yPos $TrackPos = DllStructGetData($tSCROLLINFO, "nTrackPos") Switch $nScrollCode Case $SB_TOP; user clicked the HOME keyboard key DllStructSetData($tSCROLLINFO, "nPos", $Min) Case $SB_BOTTOM; user clicked the END keyboard key DllStructSetData($tSCROLLINFO, "nPos", $Max) Case $SB_LINEUP; user clicked the top arrow DllStructSetData($tSCROLLINFO, "nPos", $Pos - 1) Case $SB_LINEDOWN; user clicked the bottom arrow DllStructSetData($tSCROLLINFO, "nPos", $Pos + 1) Case $SB_PAGEUP; user clicked the scroll bar shaft above the scroll box DllStructSetData($tSCROLLINFO, "nPos", $Pos - $Page) Case $SB_PAGEDOWN; user clicked the scroll bar shaft below the scroll box DllStructSetData($tSCROLLINFO, "nPos", $Pos + $Page) Case $SB_THUMBTRACK; user dragged the scroll box DllStructSetData($tSCROLLINFO, "nPos", $TrackPos) EndSwitch ;~ // Set the position and then retrieve it. Due to adjustments ;~ // by Windows it may not be the same as the value set. DllStructSetData($tSCROLLINFO, "fMask", $SIF_POS) _GUIScrollBars_SetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO) _GUIScrollBars_GetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO) ;// If the position has changed, scroll the window and update it $Pos = DllStructGetData($tSCROLLINFO, "nPos") If ($Pos <> $yPos) Then _GUIScrollBars_ScrollWindow($hWnd, 0, $yChar * ($yPos - $Pos)) $yPos = $Pos EndIf Return $GUI_RUNDEFMSG EndFunc ;==>WM_VSCROLL Just remember to use the latest beta. Cheers Brett Edited February 17, 2008 by Bert Vist my blog!UDFs: Opens The Default Mail Client | _LoginBox | Convert Reg to AU3 | BASS.au3 (BASS.dll) (Includes various BASS Libraries) | MultiLang.au3 (Multi-Language GUIs!)Example Scripts: Computer Info Telnet Server | "Secure" HTTP Server (Based on Manadar's Server)Software: AAMP- Advanced AutoIt Media Player | WorldCam | AYTU - Youtube Uploader Tutorials: Learning to Script with AutoIt V3Projects (Hardware + AutoIt): ArduinoUseful Links: AutoIt 1-2-3 | The AutoIt Downloads Section: | SciTE4AutoIt3 Full Version! Link to comment Share on other sites More sharing options...
FireLordZi Posted February 17, 2008 Author Share Posted February 17, 2008 Ok, it looks good, but how come I can't change the size of the child gui? While Alive() { DrinkWine(); }AutoIt Programmer Link to comment Share on other sites More sharing options...
FireLordZi Posted February 17, 2008 Author Share Posted February 17, 2008 Is there a certain limit of space that has to be between the child gui and parent gui? My gui is really f***** up right now when I'm trying to make scroll bars in my XSkin gui so I create a child gui to put the scroll bars in but its not working. While Alive() { DrinkWine(); }AutoIt Programmer Link to comment Share on other sites More sharing options...
Moderators SmOke_N Posted February 17, 2008 Moderators Share Posted February 17, 2008 Lets keep questions on the same subject in the same thread so it's easier for others to find... I merged your new topic with the old one. Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer. Link to comment Share on other sites More sharing options...
FireLordZi Posted February 17, 2008 Author Share Posted February 17, 2008 my damn controls aren't even appearing. While Alive() { DrinkWine(); }AutoIt Programmer Link to comment Share on other sites More sharing options...
FireLordZi Posted February 17, 2008 Author Share Posted February 17, 2008 I'd really like to know if it is possible to have a child gui set at coords 0,0 in its parent window. Because I can't get mine to do that! While Alive() { DrinkWine(); }AutoIt Programmer Link to comment Share on other sites More sharing options...
FireLordZi Posted February 17, 2008 Author Share Posted February 17, 2008 In the image attached if you take a look at it, it is relatively in the center of the parent gui. How do I make it where it is lined up perfectly where it's top left starts at 0,0 in its parent and its aligns and fits in the parent perfectly? image.bmp While Alive() { DrinkWine(); }AutoIt Programmer Link to comment Share on other sites More sharing options...
BrettF Posted February 17, 2008 Share Posted February 17, 2008 How in God's name are we able to help you if we don't have any code? expandcollapse popup;Scrollable Child GUI with XSkin example by Bert. ; To run, use the LATEST BETA! #include <XSkin.au3> #include <WindowsConstants.au3> #include <StructureConstants.au3> #include <GUIScrollBars.au3> #include <ScrollBarConstants.au3> #include <GUIConstantsEx.au3> ; folder of skin $Skin_Folder = @ScriptDir & "\Skins\Black-Yellow" Opt("MustDeclareVars", 1) _Main() Func _Main() Local $nFileMenu, $nExititem, $GUIMsg, $hGUI, $h_cGUI, $h_cGUI2 Local $listview, $button, $button2 ;Create Skinned GUI $hGUI = XSkinGUICreate("My GUI", 400, 400, $Skin_Folder) ;Create ChildGUI to hold controls, and to be scrollable. $h_cGUI = GUICreate("Child GUI 1", 295, 300, 50, 50, BitOR($WS_CHILD,$WS_HSCROLL,$WS_VSCROLL), -1, $hGUI) ;Set the background to be the same as in the Skin.dat folder. $bkg_color = IniRead($Skin_Folder & "\Skin.dat", "color", "background", 0xD9F6FF) GUISetBkColor($bkg_color) ;=============== ; Add all of your controls below here ;=============== $listview = GUICtrlCreateListView("col1 |col2|col3 ", 10, 10, 200, 150);,$LVS_SORTDESCENDING) $button = GUICtrlCreateButton("Value?", 75, 170, 70, 20) For $x = 1 To 30 GUICtrlCreateListViewItem("item" & $x & "|col2|col3", $listview) Next ;=============== ; Show the GUI & Other NECESSARY tid-bits ;=============== GUISetState(@SW_SHOW, $h_cGUI) GUISwitch($hGUI) GUIRegisterMsg($WM_VSCROLL, "WM_VSCROLL") GUIRegisterMsg($WM_HSCROLL, "WM_HSCROLL") GUISetState(@SW_SHOW, $hGUI) _GUIScrollBars_Init($h_cGUI) While 1 $GUIMsg = GUIGetMsg() Switch $GUIMsg Case $GUI_EVENT_CLOSE ExitLoop Case $button MsgBox (0, "", "$button was pressed!") EndSwitch WEnd Exit EndFunc ;==>_Main ;=============== ; Internal Functions. DO NOT MODIFY, 9 times out of 10, it probably won't work as you expect if you don't know what you're doing. ;=============== Func WM_SIZE($hWnd, $Msg, $wParam, $lParam) #forceref $Msg, $wParam Local $index = -1, $yChar, $xChar, $xClientMax, $xClient, $yClient, $ivMax For $x = 0 To UBound($aSB_WindowInfo) - 1 If $aSB_WindowInfo[$x][0] = $hWnd Then $index = $x $xClientMax = $aSB_WindowInfo[$index][1] $xChar = $aSB_WindowInfo[$index][2] $yChar = $aSB_WindowInfo[$index][3] $ivMax = $aSB_WindowInfo[$index][7] ExitLoop EndIf Next If $index = -1 Then Return 0 Local $tSCROLLINFO = DllStructCreate($tagSCROLLINFO) ; Retrieve the dimensions of the client area. $xClient = BitAND($lParam, 0x0000FFFF) $yClient = BitShift($lParam, 16) $aSB_WindowInfo[$index][4] = $xClient $aSB_WindowInfo[$index][5] = $yClient ; Set the vertical scrolling range and page size DllStructSetData($tSCROLLINFO, "fMask", BitOR($SIF_RANGE, $SIF_PAGE)) DllStructSetData($tSCROLLINFO, "nMin", 0) DllStructSetData($tSCROLLINFO, "nMax", $ivMax) DllStructSetData($tSCROLLINFO, "nPage", $yClient / $yChar) _GUIScrollBars_SetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO) ; Set the horizontal scrolling range and page size DllStructSetData($tSCROLLINFO, "fMask", BitOR($SIF_RANGE, $SIF_PAGE)) DllStructSetData($tSCROLLINFO, "nMin", 0) DllStructSetData($tSCROLLINFO, "nMax", 2 + $xClientMax / $xChar) DllStructSetData($tSCROLLINFO, "nPage", $xClient / $xChar) _GUIScrollBars_SetScrollInfo($hWnd, $SB_HORZ, $tSCROLLINFO) Return $GUI_RUNDEFMSG EndFunc ;==>WM_SIZE Func WM_HSCROLL($hWnd, $Msg, $wParam, $lParam) #forceref $Msg, $lParam Local $nScrollCode = BitAND($wParam, 0x0000FFFF) Local $index = -1, $xChar, $xPos Local $Min, $Max, $Page, $Pos, $TrackPos For $x = 0 To UBound($aSB_WindowInfo) - 1 If $aSB_WindowInfo[$x][0] = $hWnd Then $index = $x $xChar = $aSB_WindowInfo[$index][2] ExitLoop EndIf Next If $index = -1 Then Return 0 ;~ ; Get all the horizontal scroll bar information Local $tSCROLLINFO = _GUIScrollBars_GetScrollInfoEx($hWnd, $SB_HORZ) $Min = DllStructGetData($tSCROLLINFO, "nMin") $Max = DllStructGetData($tSCROLLINFO, "nMax") $Page = DllStructGetData($tSCROLLINFO, "nPage") ; Save the position for comparison later on $xPos = DllStructGetData($tSCROLLINFO, "nPos") $Pos = $xPos $TrackPos = DllStructGetData($tSCROLLINFO, "nTrackPos") #forceref $Min, $Max Switch $nScrollCode Case $SB_LINELEFT; user clicked left arrow DllStructSetData($tSCROLLINFO, "nPos", $Pos - 1) Case $SB_LINERIGHT; user clicked right arrow DllStructSetData($tSCROLLINFO, "nPos", $Pos + 1) Case $SB_PAGELEFT; user clicked the scroll bar shaft left of the scroll box DllStructSetData($tSCROLLINFO, "nPos", $Pos - $Page) Case $SB_PAGERIGHT; user clicked the scroll bar shaft right of the scroll box DllStructSetData($tSCROLLINFO, "nPos", $Pos + $Page) Case $SB_THUMBTRACK; user dragged the scroll box DllStructSetData($tSCROLLINFO, "nPos", $TrackPos) EndSwitch ;~ // Set the position and then retrieve it. Due to adjustments ;~ // by Windows it may not be the same as the value set. DllStructSetData($tSCROLLINFO, "fMask", $SIF_POS) _GUIScrollBars_SetScrollInfo($hWnd, $SB_HORZ, $tSCROLLINFO) _GUIScrollBars_GetScrollInfo($hWnd, $SB_HORZ, $tSCROLLINFO) ;// If the position has changed, scroll the window and update it $Pos = DllStructGetData($tSCROLLINFO, "nPos") If ($Pos <> $xPos) Then _GUIScrollBars_ScrollWindow($hWnd, $xChar * ($xPos - $Pos), 0) Return $GUI_RUNDEFMSG EndFunc ;==>WM_HSCROLL Func WM_VSCROLL($hWnd, $Msg, $wParam, $lParam) #forceref $Msg, $wParam, $lParam Local $nScrollCode = BitAND($wParam, 0x0000FFFF) Local $index = -1, $yChar, $yPos Local $Min, $Max, $Page, $Pos, $TrackPos For $x = 0 To UBound($aSB_WindowInfo) - 1 If $aSB_WindowInfo[$x][0] = $hWnd Then $index = $x $yChar = $aSB_WindowInfo[$index][3] ExitLoop EndIf Next If $index = -1 Then Return 0 ; Get all the vertial scroll bar information Local $tSCROLLINFO = _GUIScrollBars_GetScrollInfoEx($hWnd, $SB_VERT) $Min = DllStructGetData($tSCROLLINFO, "nMin") $Max = DllStructGetData($tSCROLLINFO, "nMax") $Page = DllStructGetData($tSCROLLINFO, "nPage") ; Save the position for comparison later on $yPos = DllStructGetData($tSCROLLINFO, "nPos") $Pos = $yPos $TrackPos = DllStructGetData($tSCROLLINFO, "nTrackPos") Switch $nScrollCode Case $SB_TOP; user clicked the HOME keyboard key DllStructSetData($tSCROLLINFO, "nPos", $Min) Case $SB_BOTTOM; user clicked the END keyboard key DllStructSetData($tSCROLLINFO, "nPos", $Max) Case $SB_LINEUP; user clicked the top arrow DllStructSetData($tSCROLLINFO, "nPos", $Pos - 1) Case $SB_LINEDOWN; user clicked the bottom arrow DllStructSetData($tSCROLLINFO, "nPos", $Pos + 1) Case $SB_PAGEUP; user clicked the scroll bar shaft above the scroll box DllStructSetData($tSCROLLINFO, "nPos", $Pos - $Page) Case $SB_PAGEDOWN; user clicked the scroll bar shaft below the scroll box DllStructSetData($tSCROLLINFO, "nPos", $Pos + $Page) Case $SB_THUMBTRACK; user dragged the scroll box DllStructSetData($tSCROLLINFO, "nPos", $TrackPos) EndSwitch ;~ // Set the position and then retrieve it. Due to adjustments ;~ // by Windows it may not be the same as the value set. DllStructSetData($tSCROLLINFO, "fMask", $SIF_POS) _GUIScrollBars_SetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO) _GUIScrollBars_GetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO) ;// If the position has changed, scroll the window and update it $Pos = DllStructGetData($tSCROLLINFO, "nPos") If ($Pos <> $yPos) Then _GUIScrollBars_ScrollWindow($hWnd, 0, $yChar * ($yPos - $Pos)) $yPos = $Pos EndIf Return $GUI_RUNDEFMSG EndFunc ;==>WM_VSCROLL Vist my blog!UDFs: Opens The Default Mail Client | _LoginBox | Convert Reg to AU3 | BASS.au3 (BASS.dll) (Includes various BASS Libraries) | MultiLang.au3 (Multi-Language GUIs!)Example Scripts: Computer Info Telnet Server | "Secure" HTTP Server (Based on Manadar's Server)Software: AAMP- Advanced AutoIt Media Player | WorldCam | AYTU - Youtube Uploader Tutorials: Learning to Script with AutoIt V3Projects (Hardware + AutoIt): ArduinoUseful Links: AutoIt 1-2-3 | The AutoIt Downloads Section: | SciTE4AutoIt3 Full Version! Link to comment Share on other sites More sharing options...
FireLordZi Posted February 18, 2008 Author Share Posted February 18, 2008 Yea, I believe you gave me that already and it still doesn't answer my last post. While Alive() { DrinkWine(); }AutoIt Programmer Link to comment Share on other sites More sharing options...
BrettF Posted February 18, 2008 Share Posted February 18, 2008 That ain't no XSkin GUI I've ever seen. Now I will say it again, as you didn't answer my question.How in God's name are we able to help you if we don't have any code? Vist my blog!UDFs: Opens The Default Mail Client | _LoginBox | Convert Reg to AU3 | BASS.au3 (BASS.dll) (Includes various BASS Libraries) | MultiLang.au3 (Multi-Language GUIs!)Example Scripts: Computer Info Telnet Server | "Secure" HTTP Server (Based on Manadar's Server)Software: AAMP- Advanced AutoIt Media Player | WorldCam | AYTU - Youtube Uploader Tutorials: Learning to Script with AutoIt V3Projects (Hardware + AutoIt): ArduinoUseful Links: AutoIt 1-2-3 | The AutoIt Downloads Section: | SciTE4AutoIt3 Full Version! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now