MaxNMB Posted April 25, 2008 Share Posted April 25, 2008 I posted the similar question in other section and i apologize with admin, my be this is the right section. The question is: In refer at code that i founded in other section that i report following: expandcollapse popup$WM_CAP_START = 0x400 $WM_CAP_UNICODE_START = $WM_CAP_START +100 $WM_CAP_PAL_SAVEA = $WM_CAP_START + 81 $WM_CAP_PAL_SAVEW = $WM_CAP_UNICODE_START + 81 $WM_CAP_UNICODE_END = $WM_CAP_PAL_SAVEW $WM_CAP_ABORT = $WM_CAP_START + 69 $WM_CAP_DLG_VIDEOCOMPRESSION = $WM_CAP_START + 46 $WM_CAP_DLG_VIDEODISPLAY = $WM_CAP_START + 43 $WM_CAP_DLG_VIDEOFORMAT = $WM_CAP_START + 41 $WM_CAP_DLG_VIDEOSOURCE = $WM_CAP_START + 42 $WM_CAP_DRIVER_CONNECT = $WM_CAP_START + 10 $WM_CAP_DRIVER_DISCONNECT = $WM_CAP_START + 11 $WM_CAP_DRIVER_GET_CAPS = $WM_CAP_START + 14 $WM_CAP_DRIVER_GET_NAMEA = $WM_CAP_START + 12 $WM_CAP_DRIVER_GET_NAMEW = $WM_CAP_UNICODE_START + 12 $WM_CAP_DRIVER_GET_VERSIONA = $WM_CAP_START + 13 $WM_CAP_DRIVER_GET_VERSIONW = $WM_CAP_UNICODE_START + 13 $WM_CAP_EDIT_COPY = $WM_CAP_START + 30 $WM_CAP_END = $WM_CAP_UNICODE_END $WM_CAP_FILE_ALLOCATE = $WM_CAP_START + 22 $WM_CAP_FILE_GET_CAPTURE_FILEA = $WM_CAP_START + 21 $WM_CAP_FILE_GET_CAPTURE_FILEW = $WM_CAP_UNICODE_START + 21 $WM_CAP_FILE_SAVEASA = $WM_CAP_START + 23 $WM_CAP_FILE_SAVEASW = $WM_CAP_UNICODE_START + 23 $WM_CAP_FILE_SAVEDIBA = $WM_CAP_START + 25 $WM_CAP_FILE_SAVEDIBW = $WM_CAP_UNICODE_START + 25 $WM_CAP_FILE_SET_CAPTURE_FILEA = $WM_CAP_START + 20 $WM_CAP_FILE_SET_CAPTURE_FILEW = $WM_CAP_UNICODE_START + 20 $WM_CAP_FILE_SET_INFOCHUNK = $WM_CAP_START + 24 $WM_CAP_GET_AUDIOFORMAT = $WM_CAP_START + 36 $WM_CAP_GET_CAPSTREAMPTR = $WM_CAP_START + 1 $WM_CAP_GET_MCI_DEVICEA = $WM_CAP_START + 67 $WM_CAP_GET_MCI_DEVICEW = $WM_CAP_UNICODE_START + 67 $WM_CAP_GET_SEQUENCE_SETUP = $WM_CAP_START + 65 $WM_CAP_GET_STATUS = $WM_CAP_START + 54 $WM_CAP_GET_USER_DATA = $WM_CAP_START + 8 $WM_CAP_GET_VIDEOFORMAT = $WM_CAP_START + 44 $WM_CAP_GRAB_FRAME = $WM_CAP_START + 60 $WM_CAP_GRAB_FRAME_NOSTOP = $WM_CAP_START + 61 $WM_CAP_PAL_AUTOCREATE = $WM_CAP_START + 83 $WM_CAP_PAL_MANUALCREATE = $WM_CAP_START + 84 $WM_CAP_PAL_OPENA = $WM_CAP_START + 80 $WM_CAP_PAL_OPENW = $WM_CAP_UNICODE_START + 80 $WM_CAP_PAL_PASTE = $WM_CAP_START + 82 $WM_CAP_SEQUENCE = $WM_CAP_START + 62 $WM_CAP_SEQUENCE_NOFILE = $WM_CAP_START + 63 $WM_CAP_SET_AUDIOFORMAT = $WM_CAP_START + 35 $WM_CAP_SET_CALLBACK_CAPCONTROL = $WM_CAP_START + 85 $WM_CAP_SET_CALLBACK_ERRORA = $WM_CAP_START + 2 $WM_CAP_SET_CALLBACK_ERRORW = $WM_CAP_UNICODE_START + 2 $WM_CAP_SET_CALLBACK_FRAME = $WM_CAP_START + 5 $WM_CAP_SET_CALLBACK_STATUSA = $WM_CAP_START + 3 $WM_CAP_SET_CALLBACK_STATUSW = $WM_CAP_UNICODE_START + 3 $WM_CAP_SET_CALLBACK_VIDEOSTREAM = $WM_CAP_START + 6 $WM_CAP_SET_CALLBACK_WAVESTREAM = $WM_CAP_START + 7 $WM_CAP_SET_CALLBACK_YIELD = $WM_CAP_START + 4 $WM_CAP_SET_MCI_DEVICEA = $WM_CAP_START + 66 $WM_CAP_SET_MCI_DEVICEW = $WM_CAP_UNICODE_START + 66 $WM_CAP_SET_OVERLAY = $WM_CAP_START + 51 $WM_CAP_SET_PREVIEW = $WM_CAP_START + 50 $WM_CAP_SET_PREVIEWRATE = $WM_CAP_START + 52 $WM_CAP_SET_SCALE = $WM_CAP_START + 53 $WM_CAP_SET_SCROLL = $WM_CAP_START + 55 $WM_CAP_SET_SEQUENCE_SETUP = $WM_CAP_START + 64 $WM_CAP_SET_USER_DATA = $WM_CAP_START + 9 $WM_CAP_SET_VIDEOFORMAT = $WM_CAP_START + 45 $WM_CAP_SINGLE_FRAME = $WM_CAP_START + 72 $WM_CAP_SINGLE_FRAME_CLOSE = $WM_CAP_START + 71 $WM_CAP_SINGLE_FRAME_OPEN = $WM_CAP_START + 70 $WM_CAP_STOP = $WM_CAP_START + 68 #include <GUIConstants.au3> #include "Misc.au3" $avi = DllOpen("avicap32.dll") $user = DllOpen("user32.dll") $snapfile = @ScriptDir & "\scrshot.bmp" $Main = GUICreate("Camera",350,270) $cap = DllCall($avi, "int", "capCreateCaptureWindow", "str", "cap", "int", BitOR($WS_CHILD,$WS_VISIBLE), "int", 15, "int", 15, "int", 320, "int", 240, "hwnd", $Main, "int", 1) DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_DRIVER_CONNECT, "int", 0, "int", 0) DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_SCALE, "int", 1, "int", 0) DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_OVERLAY, "int", 1, "int", 0) DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_PREVIEW, "int", 1, "int", 0) DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_PREVIEWRATE, "int", 1, "int", 0) GUISetState(@SW_SHOW) HotKeySet("{INSERT}", "SnapShot"); Press 'Insert' to make a SnapShot ! While 1 $msg = GUIGetMsg() If $msg = $GUI_EVENT_CLOSE Then ;DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_CALLBACK_FRAME, "int", 0, "int", 0) DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_END, "int", 0, "int", 0) DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_DRIVER_DISCONNECT, "int", 0, "int", 0) ;DllClose($avi) DllClose($user) Exit EndIf Sleep(1) Wend Func SnapShot() DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_GRAB_FRAME_NOSTOP, "int", 0, "int", 0) DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_FILE_SAVEDIBA, "int", 0, "str", $snapfile) EndFunc I believe to find a function named SnapShot(), that grab the image from webcam. Well, if is true how can put into a clipboard? I tryed to ad this code ClipPut($snapfile) , but when i make ctrl+v in other application I obtain this text "C:\DATI MAX\MAX\Auto_IT\scrshot.bmp", instead of image. I understand that the var $snapfile is the path at file and not the image, so wich is the var that Ihave to put in clipboard? There is someone that can help me please? thanks MaxNMB Link to comment Share on other sites More sharing options...
monoceres Posted April 25, 2008 Share Posted April 25, 2008 Have a look under ClipBoard management in the helpfile. It will provide what you need Broken link? PM me and I'll send you the file! Link to comment Share on other sites More sharing options...
MaxNMB Posted April 27, 2008 Author Share Posted April 27, 2008 Have a look under ClipBoard management in the helpfile. It will provide what you need Great..thanks for help. But i asked if someone can tell me wich is the variable where is put the "snapshot" in the script that i reported before. This for an eventual change code and add code that put the snapshot in clipboard before save on disk. I readed th help file that you suggest me..but there is not help for transfer an IMAGE in the clipboard. All sample (and i tried and work fine) is with text and not with IMAGE. I tried thhis code: _ClipBoard_Open(0) _ClipBoard_SetData($snapfile,2); or how is writer in HELP _ClipBoard_SetData($snapfile,$CF_BITMAP) _ClipBoard_Close() I used also ClipPut() and _ClipPutFile() but when I'll go to make a simple "paste" with CTRLv in other application the result is the text of path. I used also ClipPut() and _ClipPutFile(), but with the same result. As I said before i do not study the manual at all, I'm started right 2 day ago and i Find the AutoIT can resolve my problem for my application; I create a DB with FilemakerPro, and i need simple to get a Foto by webcam and put in a field. Is for my work and not a joke. Please, can someone help me? Thanks Max Link to comment Share on other sites More sharing options...
MaxNMB Posted April 27, 2008 Author Share Posted April 27, 2008 There is someone out there that can respond? Link to comment Share on other sites More sharing options...
flip209 Posted April 27, 2008 Share Posted April 27, 2008 _ClipBoard_SetData -------------------------------------------------------------------------------- Places data on the clipboard in a specified clipboard format #Include <Clipboard.au3> _ClipBoard_SetData($vData[, $iFormat = 1]) Parameters $hMemory Handle to the data in the specified format. This parameter can be NULL, indicating that the window provides data in the specified clipboard format upon request. If a window delays rendering, it must process the $WM_RENDERFORMAT and $WM_RENDERALLFORMATS messages. If this function succeeds, the system owns the object identified by the $hMemory parameter. The application may not write to or free the data once ownership has been transferred to the system, but it can lock and read from the data until the _ClipBoard_Close function is called. The memory must be unlocked before the clipboard is closed. If the $hMemory parameter identifies a memory object, the object must have been allocated using the function with the $GMEM_MOVEABLE flag. $iFormat Specifies a clipboard format: $CF_TEXT - Text format $CF_BITMAP - Handle to a bitmap (HBITMAP) $CF_METAFILEPICT - Handle to a metafile picture (METAFILEPICT) $CF_SYLK - Microsoft Symbolic Link (SYLK) format $CF_DIF - Software Arts' Data Interchange Format $CF_TIFF - Tagged image file format $CF_OEMTEXT - Text format containing characters in the OEM character set $CF_DIB - BITMAPINFO structure followed by the bitmap bits $CF_PALETTE - Handle to a color palette $CF_PENDATA - Data for the pen extensions to Pen Computing $CF_RIFF - Represents audio data in RIFF format $CF_WAVE - Represents audio data in WAVE format $CF_UNICODETEXT - Unicode text format $CF_ENHMETAFILE - Handle to an enhanced metafile (HENHMETAFILE) $CF_HDROP - Handle to type HDROP that identifies a list of files $CF_LOCALE - Handle to the locale identifier associated with text in the clipboard $CF_DIBV5 - BITMAPV5HEADER structure followed by bitmap color and the bitmap bits $CF_OWNERDISPLAY - Owner display format $CF_DSPTEXT - Text display format associated with a private format $CF_DSPBITMAP - Bitmap display format associated with a private format $CF_DSPMETAFILEPICT - Metafile picture display format associated with a private format $CF_DSPENHMETAFILE - Enhanced metafile display format associated with a private format Directly out of the help file... " I haven't failed. I've just found 10,000 ways that won't work." Thomas Edison "You cannot help men permanently by doing for them what they could and should do for themselves." Abraham Lincoln Link to comment Share on other sites More sharing options...
MaxNMB Posted April 27, 2008 Author Share Posted April 27, 2008 Ok, thank i readed the manual!! so the corect to put data in clipboard is _ClipBoard_Open(0) _ClipBoard_SetData($snapfile,$CF_BITMAP) _ClipBoard_Close() but...AGAIN...noone respond to my question: WHERE is stored( mean which varible had used, in the script that i report in my first post, the snapshot of image from webcam? thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now