LimeSeed Posted April 30, 2008 Share Posted April 30, 2008 I am making a script that is supposed to assign a password by the user moving a mouse across the gui's surface for 2 seconds. the user can than login by repeating a similar motion that has similar coordinates on the mouse axis. It does this by taking mouse coordinates every 10th of a second for 2 seconds (20 coodinates in total) then stores the x and y's separatly in an ini file. it would than randomly pick numbers from 1-20 and try to match up 5 x coordinates from the login to the user, and 5 y coordinates from the login to the user. here is my script. for some reason it just wont work, and i am asking for advice on how to get it to work! This would be an awesome script to post in the example script section. expandcollapse popup#Notrayicon guicreate("Login", 200, 100) guisetstate(@SW_SHOW) $start = guictrlcreatebutton("Start", 145, 5, 50, 40) $login = guictrlcreatebutton("Login", 145, 50, 50, 40) $1=1 $s = 0 IniWrite("login.ini", "1", "1", $1) Iniwrite("login.ini", "1", "2", "2") While 1 if $s = 1 Then msgbox(0, "Login", "Please Perform an Action in 3 seconds", 1) sleep(3000) $m1 = mousegetpos() sleep(100) $m2 = mousegetpos() sleep(100) $m3 = mousegetpos() sleep(100) $m4 = mousegetpos() sleep(100) $m5 = mousegetpos() sleep(100) $m6 = mousegetpos() sleep(100) $m7 = mousegetpos() sleep(100) $m8 = mousegetpos() sleep(100) $m9 = mousegetpos() sleep(100) $m10 = mousegetpos() sleep(100) $m11 = mousegetpos() sleep(100) $m12 = mousegetpos() sleep(100) $m13 = mousegetpos() sleep(100) $m14 = mousegetpos() sleep(100) $m15 = mousegetpos() sleep(100) $m16 = mousegetpos() sleep(100) $m17 = mousegetpos() sleep(100) $m18 = mousegetpos() sleep(100) $m19 = mousegetpos() sleep(100) $m20 = mousegetpos() iniwrite("l.ini", "1", "1", $m1[0]) iniwrite("l.ini", "1", "2", $m2[0]) iniwrite("l.ini", "1", "3", $m3[0]) iniwrite("l.ini", "1", "4", $m4[0]) iniwrite("l.ini", "1", "5", $m5[0]) iniwrite("l.ini", "1", "6", $m6[0]) iniwrite("l.ini", "1", "7", $m7[0]) iniwrite("l.ini", "1", "8", $m8[0]) iniwrite("l.ini", "1", "9", $m9[0]) iniwrite("l.ini", "1", "10", $m10[0]) iniwrite("l.ini", "1", "11", $m11[0]) iniwrite("l.ini", "1", "12", $m12[0]) iniwrite("l.ini", "1", "13", $m13[0]) iniwrite("l.ini", "1", "14", $m14[0]) iniwrite("l.ini", "1", "15", $m15[0]) iniwrite("l.ini", "1", "16", $m16[0]) iniwrite("l.ini", "1", "17", $m17[0]) iniwrite("l.ini", "1", "18", $m18[0]) iniwrite("l.ini", "1", "19", $m19[0]) iniwrite("l.ini", "1", "20", $m20[0]) ;_____________________________________________ iniwrite("l.ini", "2", "1", $m1[1]) iniwrite("l.ini", "2", "2", $m2[1]) iniwrite("l.ini", "2", "3", $m3[1]) iniwrite("l.ini", "2", "4", $m4[1]) iniwrite("l.ini", "2", "5", $m5[1]) iniwrite("l.ini", "2", "6", $m6[1]) iniwrite("l.ini", "2", "7", $m7[1]) iniwrite("l.ini", "2", "8", $m8[1]) iniwrite("l.ini", "2", "9", $m9[1]) iniwrite("l.ini", "2", "10", $m10[1]) iniwrite("l.ini", "2", "11", $m11[1]) iniwrite("l.ini", "2", "12", $m12[1]) iniwrite("l.ini", "2", "13", $m13[1]) iniwrite("l.ini", "2", "14", $m14[1]) iniwrite("l.ini", "2", "15", $m15[1]) iniwrite("l.ini", "2", "16", $m16[1]) iniwrite("l.ini", "2", "17", $m17[1]) iniwrite("l.ini", "2", "18", $m18[1]) iniwrite("l.ini", "2", "19", $m19[1]) iniwrite("l.ini", "2", "20", $m20[1]) $s = 0 msgbox(0, "Login", "End of Sequence") EndIf if $s = 2 Then msgbox(0, "login", "Please Perform an Action in 3 seconds", 1) sleep(3000) $l1 = mousegetpos() sleep(100) $l2 = mousegetpos() sleep(100) $l3 = mousegetpos() sleep(100) $l4 = mousegetpos() sleep(100) $l5 = mousegetpos() sleep(100) $l6 = mousegetpos() sleep(100) $l7 = mousegetpos() sleep(100) $l8 = mousegetpos() sleep(100) $l9 = mousegetpos() sleep(100) $l10 = mousegetpos() sleep(100) $l11 = mousegetpos() sleep(100) $l12 = mousegetpos() sleep(100) $l13 = mousegetpos() sleep(100) $l14 = mousegetpos() sleep(100) $l15 = mousegetpos() sleep(100) $l16 = mousegetpos() sleep(100) $l17 = mousegetpos() sleep(100) $l18 = mousegetpos() sleep(100) $l19 = mousegetpos() sleep(100) $l20 = mousegetpos() iniwrite("l.ini", "3", "1", $l1[0]) iniwrite("l.ini", "3", "2", $l2[0]) iniwrite("l.ini", "3", "3", $l3[0]) iniwrite("l.ini", "3", "4", $l4[0]) iniwrite("l.ini", "3", "5", $l5[0]) iniwrite("l.ini", "3", "6", $l6[0]) iniwrite("l.ini", "3", "7", $l7[0]) iniwrite("l.ini", "3", "8", $l8[0]) iniwrite("l.ini", "3", "9", $l9[0]) iniwrite("l.ini", "3", "10", $l10[0]) iniwrite("l.ini", "3", "11", $l11[0]) iniwrite("l.ini", "3", "12", $l12[0]) iniwrite("l.ini", "3", "13", $l13[0]) iniwrite("l.ini", "3", "14", $l14[0]) iniwrite("l.ini", "3", "15", $l15[0]) iniwrite("l.ini", "3", "16", $l16[0]) iniwrite("l.ini", "3", "17", $l17[0]) iniwrite("l.ini", "3", "18", $l18[0]) iniwrite("l.ini", "3", "19", $l19[0]) iniwrite("l.ini", "3", "20", $l20[0]) ;_____________________________________________ iniwrite("l.ini", "4", "1", $l1[1]) iniwrite("l.ini", "4", "2", $l2[1]) iniwrite("l.ini", "4", "3", $l3[1]) iniwrite("l.ini", "4", "4", $l4[1]) iniwrite("l.ini", "4", "5", $l5[1]) iniwrite("l.ini", "4", "6", $l6[1]) iniwrite("l.ini", "4", "7", $l7[1]) iniwrite("l.ini", "4", "8", $l8[1]) iniwrite("l.ini", "4", "9", $l9[1]) iniwrite("l.ini", "4", "10", $l10[1]) iniwrite("l.ini", "4", "11", $l11[1]) iniwrite("l.ini", "4", "12", $l12[1]) iniwrite("l.ini", "4", "13", $l13[1]) iniwrite("l.ini", "4", "14", $l14[1]) iniwrite("l.ini", "4", "15", $l15[1]) iniwrite("l.ini", "4", "16", $l16[1]) iniwrite("l.ini", "4", "17", $l17[1]) iniwrite("l.ini", "4", "18", $l18[1]) iniwrite("l.ini", "4", "19", $l19[1]) iniwrite("l.ini", "4", "20", $l20[1]) $s = 0 msgbox(0, "login", "End of Sequence") progresson("Login", "Processing...") progressset(10) sleep(150) progressset(20) sleep(150) progressset(30) sleep(150) progressset(40) sleep(150) progressset(50) sleep(150) progressset(60) sleep(150) progressset(70) sleep(150) progressset(80) sleep(150) progressset(90) sleep(150) progressset(100) sleep(150) progressoff() $R1= RANDOM(1, 20, 1) $R2= RANDOM(1, 20, 1) $R3= RANDOM(1, 20, 1) $R4= RANDOM(1, 20, 1) $R5= RANDOM(1, 20, 1) $matchupx1 = iniread("l.ini", "1", $R1, "0") $matchupx2 = iniread("l.ini", "1", $R2, "0") $matchupx3 = iniread("l.ini", "1", $R3, "0") $matchupx4 = iniread("l.ini", "1", $R4, "0") $matchupx5 = iniread("l.ini", "1", $R5, "0") $matchupx6 = iniread("l.ini", "3", $R1, "0") $matchupx7 = iniread("l.ini", "3", $R2, "100000") $matchupx8 = iniread("l.ini", "3", $R3, "0") $matchupx9 = iniread("l.ini", "3", $R4, "0") $matchupx10 = iniread("l.ini", "3", $R5, "0") $matchupy1 = iniread("l.ini", "2", $R1, "0") $matchupy2 = iniread("l.ini", "2", $R2, "0") $matchupy3 = iniread("l.ini", "2", $R3, "0") $matchupy4 = iniread("l.ini", "2", $R4, "0") $matchupy5 = iniread("l.ini", "2", $R5, "0") $matchupy6 = iniread("l.ini", "4", $R1, "0") $matchupy7 = iniread("l.ini", "4", $R2, "100000") $matchupy8 = iniread("l.ini", "4", $R3, "0") $matchupy9 = iniread("l.ini", "4", $R4, "0") $matchupy10 = iniread("l.ini", "4", $R5, "0") if (($matchupx1 + $matchupx2 + $matchupx3 + $matchupx4 + $matchupx5) - ($matchupx6 + $matchupx10 + $matchupx10 + $matchupx10 + $matchupx10))-1 <= 100 Then msgbox(0, "Login", "X axis confirmed!") EndIf if not ($matchupx1 + $matchupx2 + $matchupx3 + $matchupx4 + $matchupx5) - ($matchupx6 + $matchupx10 + $matchupx10 + $matchupx10 + $matchupx10) >=100 Then msgbox(0, "Login", "X axis denied!") EndIf EndIf $msg = guigetmsg() Select case($msg = $start) $s = 1 case($msg = $login) if fileexists("l.ini") then $s = 2 EndIf if not fileexists("l.ini") then msgbox(0, "Login", "Please create a login template", 1) EndIf Case($msg = -3) Exit EndSelect WEnd global $warming = true Link to comment Share on other sites More sharing options...
covaks Posted April 30, 2008 Share Posted April 30, 2008 I'm pretty tired, so I might have messed some things up. I tried to rewrite this my own way. Try it out and see what you think. It doesn't use any files, it's just a quick example. I originally started writing one that recorded mouse coords to file, but after running it a few times, it had some issues, so I just decided to try a different method (I can post it though if you want to see it). expandcollapse popup#include <GuiConstants.au3> #include <Array.au3> #include <File.au3> GuiCreate("",200,150) $hButtonstart = GuiCtrlCreateButton("Start",5,5,60) $hButtonLogin = GuiCtrlCreateButton("Login",5,40,60) $hLabel = GuiCtrlCreateLabel("",5,80,100) GUISetState() Global $iTolerance = 20 Global $iSnapShot = 100 Global $GestureTime = 5000 Global $sGesture = "" Global $sLogin = "" While 1 $msg = GuiGetMsg() Switch $msg Case $GUI_EVENT_CLOSE Exit Case $hButtonstart StartRecording() Case $hButtonLogin LoginTest() EndSwitch WEnd Func StartRecording($mode = 0) Local $pos1, $pos2, $pos3, $DirectionX, $DirectionY, $start, $sRecord = "" If $mode = 0 Then $sGesture = "" If $mode = 1 Then $sLogin = "" Msgbox(0,"","Click ok, then make your mouse gesture" & @CRLF & _ "You will have " & $GestureTime /1000 & " seconds after clicking") $start = TimerInit() Do $pos1 = MouseGetPos() Sleep($iSnapShot) $pos2 = MouseGetPos() Sleep($iSnapShot) $pos3 = MouseGetPos() $DirectionX = Int((($pos1[0] - $pos2[0]) + ($pos2[0] - $pos3[0])) /2) $DirectionY = Int((($pos1[1] - $pos2[1]) + ($pos2[1] - $pos3[1])) /2) ConsoleWrite($DirectionX & "," & $DirectionY & @CRLF) If Abs($DirectionX) < $iTolerance AND Abs($DirectionY) > $iTolerance Then If $DirectionY < 0 Then GuiCtrlSetData($hLabel,"Down") $sRecord &= "Down," Else GuiCtrlSetData($hLabel,"Up") $sRecord &= "Up," EndIf ElseIf Abs($DirectionX) > $iTolerance AND Abs($DirectionY) < $iTolerance Then If $DirectionX < 0 Then GuiCtrlSetData($hLabel,"Right") $sRecord &= "Right," Else GuiCtrlSetData($hLabel, "Left") $sRecord &= "Left," EndIf ElseIf $DirectionX > $iTolerance AND $DirectionY > $iTolerance Then GuiCtrlSetData($hLabel,"Up Left") $sRecord &= "Up Left," ElseIf $DirectionX < -$iTolerance AND $DirectionY < -$iTolerance Then GUICtrlSetData($hLabel,"Down Right") $sRecord &= "Down Right," ElseIf $DirectionX > $iTolerance and $DirectionY < -$iTolerance Then GUICtrlSetData($hLabel,"Down Left") $sRecord &= "Down Left," ElseIf $DirectionX < -$iTolerance And $DirectionY > $iTolerance Then GUICtrlSetData($hLabel,"Up Right") $sRecord &= "Up Right," EndIf Until TimerDiff($start) > $GestureTime SplashTextOn("","Gesture Recorded",300,50,-1,-1,33,"Arial",16,800) Sleep(1000) SplashOff() CleanupGesture($sRecord, $mode) EndFunc Func CleanupGesture($str, $mode) Local $s, $sTemp, $sCleaned $s = StringSplit($str,",") $sTemp = $s[1] For $x = 2 to $s[0] ConsoleWrite("Comparing: " & $sTemp & " - " & $s[$x] & @CRLF) If $sTemp == $s[$x] Then Else $sCleaned &= $sTemp & "," EndIf $sTemp = $s[$x] Next Switch $mode Case 0 $sGesture = $sCleaned Case 1 $sLogin = $sCleaned EndSwitch EndFunc Func LoginTest() If $sGesture = "" Then msgbox(1,"","You haven't recorded a gesture..") Return EndIf StartRecording(1) If StringCompare($sGesture, $sLogin) = 0 Then msgbox(1,"","Gesture password correct!") Else msgbox(1,"","Sorry, no dice.") EndIf EndFunc Link to comment Share on other sites More sharing options...
LimeSeed Posted April 30, 2008 Author Share Posted April 30, 2008 (edited) Yea, i edited mine, thanks for the rewrite, but i ended up using mine, as i would prefer it to be written to an external file so it could be used after the program is closed, then opened again! yours is much better, but it does not allow file writing, so i think i will use mine:P expandcollapse popup#Notrayicon guicreate("Login", 200, 100) guisetstate(@SW_SHOW) $start = guictrlcreatebutton("Start", 145, 5, 50, 40) $login = guictrlcreatebutton("Login", 145, 50, 50, 40) $1=1 guisetbkcolor(0xE0FFFF) if fileexists("l.ini") then msgbox(0, "login", "Config Loaded!", 1) EndIf While 1 $msg = guigetmsg() Select case($msg = $start) $pword = inputbox("Login", "Please Type Admin Password", "", "*") if $pword <> "heart" Then msgbox(0, "Login", "Sorry you do not have administrative rights.") Exit EndIf msgbox(0, "Login", "Please create a mouse pattern when background turns red", 1) sleep(3000) guisetbkcolor(0xFF0000) $m1 = mousegetpos() sleep(100) $m2 = mousegetpos() sleep(100) $m3 = mousegetpos() sleep(100) $m4 = mousegetpos() sleep(100) $m5 = mousegetpos() sleep(100) $m6 = mousegetpos() sleep(100) $m7 = mousegetpos() sleep(100) $m8 = mousegetpos() sleep(100) $m9 = mousegetpos() sleep(100) $m10 = mousegetpos() sleep(100) $m11 = mousegetpos() sleep(100) $m12 = mousegetpos() sleep(100) $m13 = mousegetpos() sleep(100) $m14 = mousegetpos() sleep(100) $m15 = mousegetpos() sleep(100) $m16 = mousegetpos() sleep(100) $m17 = mousegetpos() sleep(100) $m18 = mousegetpos() sleep(100) $m19 = mousegetpos() sleep(100) $m20 = mousegetpos() iniwrite("l.ini", "1", "1", $m1[0]) iniwrite("l.ini", "1", "2", $m2[0]) iniwrite("l.ini", "1", "3", $m3[0]) iniwrite("l.ini", "1", "4", $m4[0]) iniwrite("l.ini", "1", "5", $m5[0]) iniwrite("l.ini", "1", "6", $m6[0]) iniwrite("l.ini", "1", "7", $m7[0]) iniwrite("l.ini", "1", "8", $m8[0]) iniwrite("l.ini", "1", "9", $m9[0]) iniwrite("l.ini", "1", "10", $m10[0]) iniwrite("l.ini", "1", "11", $m11[0]) iniwrite("l.ini", "1", "12", $m12[0]) iniwrite("l.ini", "1", "13", $m13[0]) iniwrite("l.ini", "1", "14", $m14[0]) iniwrite("l.ini", "1", "15", $m15[0]) iniwrite("l.ini", "1", "16", $m16[0]) iniwrite("l.ini", "1", "17", $m17[0]) iniwrite("l.ini", "1", "18", $m18[0]) iniwrite("l.ini", "1", "19", $m19[0]) iniwrite("l.ini", "1", "20", $m20[0]) ;_____________________________________________ iniwrite("l.ini", "2", "1", $m1[1]) iniwrite("l.ini", "2", "2", $m2[1]) iniwrite("l.ini", "2", "3", $m3[1]) iniwrite("l.ini", "2", "4", $m4[1]) iniwrite("l.ini", "2", "5", $m5[1]) iniwrite("l.ini", "2", "6", $m6[1]) iniwrite("l.ini", "2", "7", $m7[1]) iniwrite("l.ini", "2", "8", $m8[1]) iniwrite("l.ini", "2", "9", $m9[1]) iniwrite("l.ini", "2", "10", $m10[1]) iniwrite("l.ini", "2", "11", $m11[1]) iniwrite("l.ini", "2", "12", $m12[1]) iniwrite("l.ini", "2", "13", $m13[1]) iniwrite("l.ini", "2", "14", $m14[1]) iniwrite("l.ini", "2", "15", $m15[1]) iniwrite("l.ini", "2", "16", $m16[1]) iniwrite("l.ini", "2", "17", $m17[1]) iniwrite("l.ini", "2", "18", $m18[1]) iniwrite("l.ini", "2", "19", $m19[1]) iniwrite("l.ini", "2", "20", $m20[1]) msgbox(0, "Login", "End of Sequence") guisetbkcolor(0xE0FFFF) ;________________________________________________ case($msg = $login) if fileexists("l.ini") then msgbox(0, "login", "Please recreate your password", 1) if not fileexists("l.ini") then msgbox(0, "Login", "Please create a login template.", 1) EndIf EndIf sleep(3000) guisetbkcolor(0xFF0000) $l1 = mousegetpos() sleep(100) $l2 = mousegetpos() sleep(100) $l3 = mousegetpos() sleep(100) $l4 = mousegetpos() sleep(100) $l5 = mousegetpos() sleep(100) $l6 = mousegetpos() sleep(100) $l7 = mousegetpos() sleep(100) $l8 = mousegetpos() sleep(100) $l9 = mousegetpos() sleep(100) $l10 = mousegetpos() sleep(100) $l11 = mousegetpos() sleep(100) $l12 = mousegetpos() sleep(100) $l13 = mousegetpos() sleep(100) $l14 = mousegetpos() sleep(100) $l15 = mousegetpos() sleep(100) $l16 = mousegetpos() sleep(100) $l17 = mousegetpos() sleep(100) $l18 = mousegetpos() sleep(100) $l19 = mousegetpos() sleep(100) $l20 = mousegetpos() iniwrite("l.ini", "3", "1", $l1[0]) iniwrite("l.ini", "3", "2", $l2[0]) iniwrite("l.ini", "3", "3", $l3[0]) iniwrite("l.ini", "3", "4", $l4[0]) iniwrite("l.ini", "3", "5", $l5[0]) iniwrite("l.ini", "3", "6", $l6[0]) iniwrite("l.ini", "3", "7", $l7[0]) iniwrite("l.ini", "3", "8", $l8[0]) iniwrite("l.ini", "3", "9", $l9[0]) iniwrite("l.ini", "3", "10", $l10[0]) iniwrite("l.ini", "3", "11", $l11[0]) iniwrite("l.ini", "3", "12", $l12[0]) iniwrite("l.ini", "3", "13", $l13[0]) iniwrite("l.ini", "3", "14", $l14[0]) iniwrite("l.ini", "3", "15", $l15[0]) iniwrite("l.ini", "3", "16", $l16[0]) iniwrite("l.ini", "3", "17", $l17[0]) iniwrite("l.ini", "3", "18", $l18[0]) iniwrite("l.ini", "3", "19", $l19[0]) iniwrite("l.ini", "3", "20", $l20[0]) ;_____________________________________________ iniwrite("l.ini", "4", "1", $l1[1]) iniwrite("l.ini", "4", "2", $l2[1]) iniwrite("l.ini", "4", "3", $l3[1]) iniwrite("l.ini", "4", "4", $l4[1]) iniwrite("l.ini", "4", "5", $l5[1]) iniwrite("l.ini", "4", "6", $l6[1]) iniwrite("l.ini", "4", "7", $l7[1]) iniwrite("l.ini", "4", "8", $l8[1]) iniwrite("l.ini", "4", "9", $l9[1]) iniwrite("l.ini", "4", "10", $l10[1]) iniwrite("l.ini", "4", "11", $l11[1]) iniwrite("l.ini", "4", "12", $l12[1]) iniwrite("l.ini", "4", "13", $l13[1]) iniwrite("l.ini", "4", "14", $l14[1]) iniwrite("l.ini", "4", "15", $l15[1]) iniwrite("l.ini", "4", "16", $l16[1]) iniwrite("l.ini", "4", "17", $l17[1]) iniwrite("l.ini", "4", "18", $l18[1]) iniwrite("l.ini", "4", "19", $l19[1]) iniwrite("l.ini", "4", "20", $l20[1]) $s = 0 msgbox(0, "login", "End of Sequence") guisetbkcolor(0xE0FFFF) progresson("Login", "Processing...") progressset(10) sleep(150) progressset(20) sleep(150) progressset(30) sleep(150) progressset(40) sleep(150) progressset(50) sleep(150) progressset(60) sleep(150) progressset(70) sleep(150) progressset(80) sleep(150) progressset(90) sleep(150) progressset(100) sleep(150) progressoff() $R1= RANDOM(1, 20, 1) $R2= RANDOM(1, 20, 1) $R3= RANDOM(1, 20, 1) $R4= RANDOM(1, 20, 1) $R5= RANDOM(1, 20, 1) $matchupx1 = iniread("l.ini", "1", $R1, "0") $matchupx2 = iniread("l.ini", "1", $R2, "0") $matchupx3 = iniread("l.ini", "1", $R3, "0") $matchupx4 = iniread("l.ini", "1", $R4, "0") $matchupx5 = iniread("l.ini", "1", $R5, "0") $matchupx6 = iniread("l.ini", "3", $R1, "0") $matchupx7 = iniread("l.ini", "3", $R2, "100000") $matchupx8 = iniread("l.ini", "3", $R3, "0") $matchupx9 = iniread("l.ini", "3", $R4, "0") $matchupx10 = iniread("l.ini", "3", $R5, "0") $matchupy1 = iniread("l.ini", "2", $R1, "0") $matchupy2 = iniread("l.ini", "2", $R2, "0") $matchupy3 = iniread("l.ini", "2", $R3, "0") $matchupy4 = iniread("l.ini", "2", $R4, "0") $matchupy5 = iniread("l.ini", "2", $R5, "0") $matchupy6 = iniread("l.ini", "4", $R1, "0") $matchupy7 = iniread("l.ini", "4", $R2, "100000") $matchupy8 = iniread("l.ini", "4", $R3, "0") $matchupy9 = iniread("l.ini", "4", $R4, "0") $matchupy10 = iniread("l.ini", "4", $R5, "0") if abs(($matchupx1 + $matchupx2 + $matchupx3 + $matchupx4 + $matchupx5) - ($matchupx6 + $matchupx7 + $matchupx8 + $matchupx9 + $matchupx10)) < 90 Then If abs(($matchupy1 + $matchupy2 + $matchupy3 + $matchupy4 + $matchupy5) - ($matchupy6 + $matchupy7 + $matchupy8 + $matchupy9 + $matchupy10)) < 90 Then msgbox(0, "Login", "Coordinates Confirmed") run("cmd.exe") EndIf EndIf if abs(($matchupx1 + $matchupx2 + $matchupx3 + $matchupx4 + $matchupx5) - ($matchupx6 + $matchupx10 + $matchupx10 + $matchupx10 + $matchupx10)) >= 90 Then if abs(($matchupy1 + $matchupy2 + $matchupy3 + $matchupy4 + $matchupy5) - ($matchupy6 + $matchupy7 + $matchupy8 + $matchupy9 + $matchupy10)) >= 90 Then msgbox(0, "Login", "Coordinates Denied!") EndIf EndIf Case($msg = -3) Exit EndSelect WEnd Edited April 30, 2008 by LimeSeed global $warming = true Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now