Jump to content

Refreshig script

tempman
 Share

Recommended Posts

tempman Adventurer

tempman

Posted
Posted

This script read ipconfig but only once

#NoTrayIcon
#include <GuiConstants.au3>

GuiCreate("IPset", 400, 400)

GuiCtrlCreateTab(5, 5, 390, 350)
GuiCtrlCreateTabItem("IP address")
#Region
$ip = Run(@ComSpec & " /c ipconfig","",@SW_HIDE, 2)
$ip_output=StdoutRead($ip)
GUICtrlCreateLabel ($ip_output, 80, 50, 0, 0)
#EndRegion

GuiSetState()

While 1
    $msg = GUIGetMsg()
        Select
        Case $msg = $GUI_EVENT_CLOSE
        ExitLoop
    EndSelect
WEnd

GUIDelete()
Exit

How to refresh script after seting another IP without restarting?

Link to comment
Share on other sites
monoceres Universalist

monoceres

Posted
Posted (edited)

This script read ipconfig but only once

How to refresh script after seting another IP without restarting?

Do you mean that the label will be updated? Then GUICtrlSetData() will do fine, I added it to your script, so now F2 refresh it.

#NoTrayIcon
#include <GuiConstants.au3>
GuiCreate("IPset", 400, 400)
GuiCtrlCreateTab(5, 5, 390, 350)
GuiCtrlCreateTabItem("IP address")
#Region
$ip = Run(@ComSpec & " /c ipconfig","",@SW_HIDE, 2)
$ip_output=StdoutRead($ip)
$label=GUICtrlCreateLabel ($ip_output, 80, 50, 0, 0) ; Added control id
HotKeySet("{F2}","_refresh") ; add hotkey
#EndRegion

GuiSetState()

While 1
    $msg = GUIGetMsg()
        Select
        Case $msg = $GUI_EVENT_CLOSE
        ExitLoop
    EndSelect
WEnd

GUIDelete()
Exit

Func _refresh() ; Function that will be executed when pressing F2
    $ip = Run(@ComSpec & " /c ipconfig","",@SW_HIDE, 2)
    $ip_output=StdoutRead($ip)
    GUICtrlSetData($label,$ip)
EndFunc

Hope it helped :)

Edited by monoceres

Broken link? PM me and I'll send you the file!

Link to comment
Share on other sites
monoceres Universalist

monoceres

Posted
Posted

:)

But can be done without F2?

something like Send({F2}) for GUI?

The simpliest way is to just call the function in the loop.

The problem is that when you use GUIGetMsg() the loop sometimes sleep to much and sometimes too little, therefore I always use OnEventMode this gives IMO more control over your program.

#NoTrayIcon
#include <GuiConstants.au3>
Opt("GUIOnEventMode",1)
GuiCreate("IPset", 400, 400)
GUISetOnEvent(-3,"close")
GuiCtrlCreateTab(5, 5, 390, 350)
GuiCtrlCreateTabItem("IP address")
#Region
$ip = Run(@ComSpec & " /c ipconfig","",@SW_HIDE, 2)
$ip_output=StdoutRead($ip)
$label=GUICtrlCreateLabel ($ip_output, 80, 50, 0, 0) ; Added control id
HotKeySet("{F2}","_refresh") ; add hotkey
#EndRegion

GuiSetState()

While 1
sleep(1000)
_refresh()
WEnd



Func _refresh() ; Function that will be executed when pressing F2
    $ip = Run(@ComSpec & " /c ipconfig","",@SW_HIDE, 2)
    $ip_output=StdoutRead($ip)
    GUICtrlSetData($label,$ip_output)
EndFunc

Func close ()
    Exit
EndFunc

This will update once every second :(

Broken link? PM me and I'll send you the file!

Link to comment
Share on other sites
weaponx Universalist

weaponx

Posted
Posted 

; Generated by AutoIt Scriptomatic

$wbemFlagReturnImmediately = 0x10
$wbemFlagForwardOnly = 0x20
$colItems = ""
$strComputer = "localhost"

$Output=""
$Output = $Output & "Computer: " & $strComputer  & @CRLF
$Output = $Output & "==========================================" & @CRLF
$objWMIService = ObjGet("winmgmts:\\" & $strComputer & "\root\CIMV2")
$colItems = $objWMIService.ExecQuery("SELECT * FROM Win32_NetworkAdapterConfiguration", "WQL", _
                                          $wbemFlagReturnImmediately + $wbemFlagForwardOnly)

If IsObj($colItems) then
   For $objItem In $colItems
      $Output = $Output & "ArpAlwaysSourceRoute: " & $objItem.ArpAlwaysSourceRoute & @CRLF
      $Output = $Output & "ArpUseEtherSNAP: " & $objItem.ArpUseEtherSNAP & @CRLF
      $Output = $Output & "Caption: " & $objItem.Caption & @CRLF
      $Output = $Output & "DatabasePath: " & $objItem.DatabasePath & @CRLF
      $Output = $Output & "DeadGWDetectEnabled: " & $objItem.DeadGWDetectEnabled & @CRLF
      $strDefaultIPGateway = $objItem.DefaultIPGateway(0)
      $Output = $Output & "DefaultIPGateway: " & $strDefaultIPGateway & @CRLF
      $Output = $Output & "DefaultTOS: " & $objItem.DefaultTOS & @CRLF
      $Output = $Output & "DefaultTTL: " & $objItem.DefaultTTL & @CRLF
      $Output = $Output & "Description: " & $objItem.Description & @CRLF
      $Output = $Output & "DHCPEnabled: " & $objItem.DHCPEnabled & @CRLF
      $Output = $Output & "DHCPLeaseExpires: " & WMIDateStringToDate($objItem.DHCPLeaseExpires) & @CRLF
      $Output = $Output & "DHCPLeaseObtained: " & WMIDateStringToDate($objItem.DHCPLeaseObtained) & @CRLF
      $Output = $Output & "DHCPServer: " & $objItem.DHCPServer & @CRLF
      $Output = $Output & "DNSDomain: " & $objItem.DNSDomain & @CRLF
      $strDNSDomainSuffixSearchOrder = $objItem.DNSDomainSuffixSearchOrder(0)
      Consolewrite($strDNSDomainSuffixSearchOrder & @CRLF)
      $Output = $Output & "DNSDomainSuffixSearchOrder: " & $strDNSDomainSuffixSearchOrder & @CRLF
      $Output = $Output & "DNSEnabledForWINSResolution: " & $objItem.DNSEnabledForWINSResolution & @CRLF
      $Output = $Output & "DNSHostName: " & $objItem.DNSHostName & @CRLF
      $strDNSServerSearchOrder = $objItem.DNSServerSearchOrder(0)
      $Output = $Output & "DNSServerSearchOrder: " & $strDNSServerSearchOrder & @CRLF
      $Output = $Output & "DomainDNSRegistrationEnabled: " & $objItem.DomainDNSRegistrationEnabled & @CRLF
      $Output = $Output & "ForwardBufferMemory: " & $objItem.ForwardBufferMemory & @CRLF
      $Output = $Output & "FullDNSRegistrationEnabled: " & $objItem.FullDNSRegistrationEnabled & @CRLF
      $strGatewayCostMetric = $objItem.GatewayCostMetric(0)
      $Output = $Output & "GatewayCostMetric: " & $strGatewayCostMetric & @CRLF
      $Output = $Output & "IGMPLevel: " & $objItem.IGMPLevel & @CRLF
      $Output = $Output & "Index: " & $objItem.Index & @CRLF
      $strIPAddress = $objItem.IPAddress(0)
      $Output = $Output & "IPAddress: " & $strIPAddress & @CRLF
      $Output = $Output & "IPConnectionMetric: " & $objItem.IPConnectionMetric & @CRLF
      $Output = $Output & "IPEnabled: " & $objItem.IPEnabled & @CRLF
      $Output = $Output & "IPFilterSecurityEnabled: " & $objItem.IPFilterSecurityEnabled & @CRLF
      $Output = $Output & "IPPortSecurityEnabled: " & $objItem.IPPortSecurityEnabled & @CRLF
      $strIPSecPermitIPProtocols = $objItem.IPSecPermitIPProtocols(0)
      $Output = $Output & "IPSecPermitIPProtocols: " & $strIPSecPermitIPProtocols & @CRLF
      $strIPSecPermitTCPPorts = $objItem.IPSecPermitTCPPorts(0)
      $Output = $Output & "IPSecPermitTCPPorts: " & $strIPSecPermitTCPPorts & @CRLF
      $strIPSecPermitUDPPorts = $objItem.IPSecPermitUDPPorts(0)
      $Output = $Output & "IPSecPermitUDPPorts: " & $strIPSecPermitUDPPorts & @CRLF
      $strIPSubnet = $objItem.IPSubnet(0)
      $Output = $Output & "IPSubnet: " & $strIPSubnet & @CRLF
      $Output = $Output & "IPUseZeroBroadcast: " & $objItem.IPUseZeroBroadcast & @CRLF
      $Output = $Output & "IPXAddress: " & $objItem.IPXAddress & @CRLF
      $Output = $Output & "IPXEnabled: " & $objItem.IPXEnabled & @CRLF
      $strIPXFrameType = $objItem.IPXFrameType(0)
      $Output = $Output & "IPXFrameType: " & $strIPXFrameType & @CRLF
      $Output = $Output & "IPXMediaType: " & $objItem.IPXMediaType & @CRLF
      $strIPXNetworkNumber = $objItem.IPXNetworkNumber(0)
      $Output = $Output & "IPXNetworkNumber: " & $strIPXNetworkNumber & @CRLF
      $Output = $Output & "IPXVirtualNetNumber: " & $objItem.IPXVirtualNetNumber & @CRLF
      $Output = $Output & "KeepAliveInterval: " & $objItem.KeepAliveInterval & @CRLF
      $Output = $Output & "KeepAliveTime: " & $objItem.KeepAliveTime & @CRLF
      $Output = $Output & "MACAddress: " & $objItem.MACAddress & @CRLF
      $Output = $Output & "MTU: " & $objItem.MTU & @CRLF
      $Output = $Output & "NumForwardPackets: " & $objItem.NumForwardPackets & @CRLF
      $Output = $Output & "PMTUBHDetectEnabled: " & $objItem.PMTUBHDetectEnabled & @CRLF
      $Output = $Output & "PMTUDiscoveryEnabled: " & $objItem.PMTUDiscoveryEnabled & @CRLF
      $Output = $Output & "ServiceName: " & $objItem.ServiceName & @CRLF
      $Output = $Output & "SettingID: " & $objItem.SettingID & @CRLF
      $Output = $Output & "TcpipNetbiosOptions: " & $objItem.TcpipNetbiosOptions & @CRLF
      $Output = $Output & "TcpMaxConnectRetransmissions: " & $objItem.TcpMaxConnectRetransmissions & @CRLF
      $Output = $Output & "TcpMaxDataRetransmissions: " & $objItem.TcpMaxDataRetransmissions & @CRLF
      $Output = $Output & "TcpNumConnections: " & $objItem.TcpNumConnections & @CRLF
      $Output = $Output & "TcpUseRFC1122UrgentPointer: " & $objItem.TcpUseRFC1122UrgentPointer & @CRLF
      $Output = $Output & "TcpWindowSize: " & $objItem.TcpWindowSize & @CRLF
      $Output = $Output & "WINSEnableLMHostsLookup: " & $objItem.WINSEnableLMHostsLookup & @CRLF
      $Output = $Output & "WINSHostLookupFile: " & $objItem.WINSHostLookupFile & @CRLF
      $Output = $Output & "WINSPrimaryServer: " & $objItem.WINSPrimaryServer & @CRLF
      $Output = $Output & "WINSScopeID: " & $objItem.WINSScopeID & @CRLF
      $Output = $Output & "WINSSecondaryServer: " & $objItem.WINSSecondaryServer & @CRLF
      if Msgbox(1,"WMI Output",$Output) = 2 then ExitLoop
      $Output=""
   Next
Else
   Msgbox(0,"WMI Output","No WMI Objects Found for class: " & "Win32_NetworkAdapterConfiguration" )
Endif


Func WMIDateStringToDate($dtmDate)

    Return (StringMid($dtmDate, 5, 2) & "/" & _
    StringMid($dtmDate, 7, 2) & "/" & StringLeft($dtmDate, 4) _
    & " " & StringMid($dtmDate, 9, 2) & ":" & StringMid($dtmDate, 11, 2) & ":" & StringMid($dtmDate,13, 2))
EndFunc

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...