Jump to content

Always had this problem..

Innovative
 Share

Recommended Posts

Innovative Universalist

Innovative

Posted
Posted

Clicked on the connect button , but nothing came out =.=

This is the frequent problem im having.. 

#include <GUIConstants.au3>
#include <Constants.au3>
#include <IE.au3>
#include <inet.au3>
#include <Array.au3>

Opt("GUIDataSeparatorChar", @LF) ; Some people have | in their names.. Ex.: Manadar|Away
Opt("TrayMenuMode", 1) ; 1 = no default menu - I need this later
Opt("TrayOnEventMode", 1)
Opt("GUIOnEventMode", 1)
Opt("GUIResizeMode", $GUI_DOCKAUTO)

Global $Target_IP = _INetGetSource("http://xandaire.no-ip.org/bu/GETIP.php")
Global $sock, $version = 0.1
Global $port = 6667


$GUIOpt = GUICreate("Connect to XandaireAssist", 225, 223)
GUISetOnEvent($GUI_EVENT_CLOSE, "_Opt_Close")
; Start of Login Informations
GUICtrlCreateGroup("Login Information", 5, 5, 215, 105)
GUICtrlCreateLabel("Username :", 15, 28, 52, 17)
$InputUsername = GUICtrlCreateInput("", 75, 25, 126, 21)
GUICtrlCreateLabel("Password :", 15, 55, 52, 17)
$InputPassword = GUICtrlCreateInput("", 75, 55, 126, 21)
$ButtonRegister = GUICtrlCreateButton("Register", 15, 80, 55, 20)
$ButtonConnect = GUICtrlCreateButton("Connect", 85, 80, 55, 20)
; End of Login Informations
GUICtrlCreateGroup("Application Options", 5, 115, 215, 105)
$CheckboxMultiple = GUICtrlCreateCheckbox("Multiple Assist Connection", 15, 130)
$CheckboxSkipUpdate = GUICtrlCreateCheckbox("Skip Application Update (premium)", 15, 150)
$CheckboxRemotely = GUICtrlCreateCheckbox("Assist connected System (premium)", 15, 170)
$CheckboxConnectState = GUICtrlCreateCheckbox("Connect anonymously (premium)", 15, 190)
GUICtrlSetState($CheckboxConnectState, $GUI_DISABLE)
GUICtrlSetState($CheckboxSkipUpdate, $GUI_DISABLE)
GUICtrlSetState($CheckboxRemotely, $GUI_DISABLE)
GUISetState(@SW_SHOW)

While 1
$msg = GUIGetMsg()
    Switch $msg
        Case $ButtonConnect
            MsgBox(0, "", "")
EndSwitch

WEnd
Link to comment
Share on other sites
zackrspv Universalist

zackrspv

Posted
Posted (edited)

Clicked on the connect button , but nothing came out =.=

This is the frequent problem im having.. 

#include <GUIConstants.au3>
#include <Constants.au3>
#include <IE.au3>
#include <inet.au3>
#include <Array.au3>

Opt("GUIDataSeparatorChar", @LF) ; Some people have | in their names.. Ex.: Manadar|Away
Opt("TrayMenuMode", 1) ; 1 = no default menu - I need this later
Opt("TrayOnEventMode", 1)
Opt("GUIOnEventMode", 1)
Opt("GUIResizeMode", $GUI_DOCKAUTO)

Global $Target_IP = _INetGetSource("http://xandaire.no-ip.org/bu/GETIP.php")
Global $sock, $version = 0.1
Global $port = 6667


$GUIOpt = GUICreate("Connect to XandaireAssist", 225, 223)
GUISetOnEvent($GUI_EVENT_CLOSE, "_Opt_Close")
; Start of Login Informations
GUICtrlCreateGroup("Login Information", 5, 5, 215, 105)
GUICtrlCreateLabel("Username :", 15, 28, 52, 17)
$InputUsername = GUICtrlCreateInput("", 75, 25, 126, 21)
GUICtrlCreateLabel("Password :", 15, 55, 52, 17)
$InputPassword = GUICtrlCreateInput("", 75, 55, 126, 21)
$ButtonRegister = GUICtrlCreateButton("Register", 15, 80, 55, 20)
$ButtonConnect = GUICtrlCreateButton("Connect", 85, 80, 55, 20)
; End of Login Informations
GUICtrlCreateGroup("Application Options", 5, 115, 215, 105)
$CheckboxMultiple = GUICtrlCreateCheckbox("Multiple Assist Connection", 15, 130)
$CheckboxSkipUpdate = GUICtrlCreateCheckbox("Skip Application Update (premium)", 15, 150)
$CheckboxRemotely = GUICtrlCreateCheckbox("Assist connected System (premium)", 15, 170)
$CheckboxConnectState = GUICtrlCreateCheckbox("Connect anonymously (premium)", 15, 190)
GUICtrlSetState($CheckboxConnectState, $GUI_DISABLE)
GUICtrlSetState($CheckboxSkipUpdate, $GUI_DISABLE)
GUICtrlSetState($CheckboxRemotely, $GUI_DISABLE)
GUISetState(@SW_SHOW)

While 1
$msg = GUIGetMsg()
    Switch $msg
        Case $ButtonConnect
            MsgBox(0, "", "")
EndSwitch

WEnd

Why are you using ONEVENTMODE and GUIGETMESSAGE?

From help File:

If the GUIOnEventMode option is set to 1 then the return from GUIGetMsg is always 0 and the @error is set to 1.

If the option GUIEventOptions is set to 1 the minimize, restore and maximize button will not do any action on the window just a simple notification.

This code works:

#include<GUIConstantsEx.au3>
#include<Inet.au3>

Opt("GUIDataSeparatorChar", @LF); Some people have | in their names.. Ex.: Manadar|Away
Opt("TrayMenuMode", 1); 1 = no default menu - I need this later
Opt("TrayOnEventMode", 1)
Opt("GUIResizeMode", $GUI_DOCKAUTO)

Global $Target_IP = _INetGetSource("http://xandaire.no-ip.org/bu/GETIP.php")
Global $sock, $version = 0.1
Global $port = 6667


$GUIOpt = GUICreate("Connect to XandaireAssist", 225, 223)
; Start of Login Informations
GUICtrlCreateGroup("Login Information", 5, 5, 215, 105)
GUICtrlCreateLabel("Username :", 15, 28, 52, 17)
$InputUsername = GUICtrlCreateInput("", 75, 25, 126, 21)
GUICtrlCreateLabel("Password :", 15, 55, 52, 17)
$InputPassword = GUICtrlCreateInput("", 75, 55, 126, 21)
$ButtonRegister = GUICtrlCreateButton("Register", 15, 80, 55, 20)
$ButtonConnect = GUICtrlCreateButton("Connect", 85, 80, 55, 20)
; End of Login Informations
GUICtrlCreateGroup("Application Options", 5, 115, 215, 105)
$CheckboxMultiple = GUICtrlCreateCheckbox("Multiple Assist Connection", 15, 130)
$CheckboxSkipUpdate = GUICtrlCreateCheckbox("Skip Application Update (premium)", 15, 150)
$CheckboxRemotely = GUICtrlCreateCheckbox("Assist connected System (premium)", 15, 170)
$CheckboxConnectState = GUICtrlCreateCheckbox("Connect anonymously (premium)", 15, 190)
GUICtrlSetState($CheckboxConnectState, $GUI_DISABLE)
GUICtrlSetState($CheckboxSkipUpdate, $GUI_DISABLE)
GUICtrlSetState($CheckboxRemotely, $GUI_DISABLE)
GUISetState(@SW_SHOW)

While 1
$msg = GUIGetMsg()
    Switch $msg
        Case $ButtonConnect
            MsgBox(0, "", "")
        Case $GUI_EVENT_CLOSe
            Exit
EndSwitch

WEnd
Edited by zackrspv

-_-------__--_-_-____---_-_--_-__-__-_ ^^€ñ†®øÞÿ ë×阮§ wï†høµ† ƒë@®, wï†høµ† †ïmë, @ñd wï†høµ† @ †ïmïdï†ÿ ƒø® !ïƒë. €×阮 ñø†, bµ† ïñ§†ë@d wï†hïñ, ñ@ÿ, †h®øµghøµ† †hë 맧ëñ§ë øƒ !ïƒë.

Link to comment
Share on other sites
Innovative Universalist

Innovative

Posted
  • Author
Posted

Look at this , i just cant get over TCPAccept

While 1
$msg = GUIGetMsg()
    Switch $msg
        Case $ButtonConnect
            
            
            GUICtrlDelete($ButtonRegister)
            GUICtrlDelete($ButtonConnect)
            GUICtrlCreateLabel("Status : Checking login informations..", 15, 80)
            TCPStartup()
            $s_ConnectSocket = TCPConnect($Target_IP, $port)
            MsgBox(0, "", "Over connect - "& $s_ConnectSocket &"")
            TCPSend($s_ConnectSocket, "<connect>" & _INetGetSource("http://whatismyip.org"))
            $MainSocket = TCPListen(@IPAddress1, 6666)
            MsgBox(0, "", "Over listen - "& $MainSocket &"")
            Do
                $ConnectedSocket = TCPAccept($MainSocket)
            Until $ConnectedSocket <> -1
            MsgBox(0, "", "Over accept")
Link to comment
Share on other sites
zackrspv Universalist

zackrspv

Posted
Posted

Look at this , i just cant get over TCPAccept

While 1
$msg = GUIGetMsg()
    Switch $msg
        Case $ButtonConnect
            
            
            GUICtrlDelete($ButtonRegister)
            GUICtrlDelete($ButtonConnect)
            GUICtrlCreateLabel("Status : Checking login informations..", 15, 80)
            TCPStartup()
            $s_ConnectSocket = TCPConnect($Target_IP, $port)
            MsgBox(0, "", "Over connect - "& $s_ConnectSocket &"")
            TCPSend($s_ConnectSocket, "<connect>" & _INetGetSource("http://whatismyip.org"))
            $MainSocket = TCPListen(@IPAddress1, 6666)
            MsgBox(0, "", "Over listen - "& $MainSocket &"")
            Do
                $ConnectedSocket = TCPAccept($MainSocket)
            Until $ConnectedSocket <> -1
            MsgBox(0, "", "Over accept")

IDK, to me that Do/Until loop looks wrong lol but then, i'm no expert :) as im sure many MVP's would say *sighs*, but hey i'm getting there.

From the Help File:

;  look for client connection
;--------------------
While 1
$ConnectedSocket = TCPAccept( $MainSocket)
If $ConnectedSocket >= 0 Then
    msgbox(0,"","my server - Client Connected")
    exit
EndIf
Wend

Maybe change your do loop to:

Do
    $ConnectedSocket = TCPAccept($MainSocket)
Until $ConnectedSocket >= 0
MsgBox(0, "", "Over accept")[/autoit]

I tested your connect code and created a 2nd autoit file to connect back to my @ipaddress on port 666 and it went over that, so perhaps those changes will work for you.

-_-------__--_-_-____---_-_--_-__-__-_ ^^€ñ†®øÞÿ ë×阮§ wï†høµ† ƒë@®, wï†høµ† †ïmë, @ñd wï†høµ† @ †ïmïdï†ÿ ƒø® !ïƒë. €×阮 ñø†, bµ† ïñ§†ë@d wï†hïñ, ñ@ÿ, †h®øµghøµ† †hë 맧ëñ§ë øƒ !ïƒë.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...