Jump to content

Please Help ! Urgent


Recommended Posts

Because im too dumb to understand how to use autoit >< can some1 please help..?

Can some 1 make me a script of

Holding Win key + press Esc

then repeat 6 times

and finally close the script.exe or pause the script ?

Please help and make it if it is possible...This very Urgent..and im not just lazy i've readed through the manual but i just cant understand !! so Thanks to any1 who helps ^^

Edited by icac2003
Link to comment
Share on other sites

Because im too dumb to understand how to use autoit >< can some1 please help..?

Can some 1 make me a script of

Holding Win key + press Esc

then repeat 6 times

and finally close the script.exe or pause the script ?

Please help and make it if it is possible...This very Urgent..and im not just lazy i've readed through the manual but i just cant understand !! so Thanks to any1 who helps ^^

learning to script..download autoit/install then check help file.

script that presses keys. Google "send key list" <--1st link for autoit send key list.

or just check the send key list in the helpfile.

Edited by will88
Link to comment
Share on other sites

i think you can not open the HelpFile thats why i have copied it for you.

Function Reference

Send

--------------------------------------------------------------------------------

Sends simulated keystrokes to the active window.

Send ( "keys" [, flag] )

Parameters

keys The sequence of keys to send.

flag [optional] Changes how "keys" is processed:

flag = 0 (default), Text contains special characters like + and ! to indicate SHIFT and ALT key-presses.

flag = 1, keys are sent raw.

Return Value

None.

Remarks

See the Appendix for some tips on using Send. AutoIt can send all ASCII and Extended ASCII characters (0-255), to send UNICODE characters you must use the "ASC" option and the code of the character you wish to send (see {ASC} at the bottom of the table below).

The "Send" command syntax is similar to that of ScriptIt and the Visual Basic "SendKeys" command. Characters are sent as written with the exception of the following characters:

'!'

This tells AutoIt to send an ALT keystroke, therefore Send("This is text!a") would send the keys "This is text" and then press "ALT+a".

N.B. Some programs are very choosy about capital letters and ALT keys, i.e. "!A" is different to "!a". The first says ALT+SHIFT+A, the second is ALT+a. If in doubt, use lowercase!

'+'

This tells AutoIt to send a SHIFT keystroke, therefore Send("Hell+o") would send the text "HellO". Send("!+a") would send "ALT+SHIFT+a".

'^'

This tells AutoIt to send a CONTROL keystroke, therefore Send("^!a") would send "CTRL+ALT+a".

N.B. Some programs are very choosy about capital letters and CTRL keys, i.e. "^A" is different to "^a". The first says CTRL+SHIFT+A, the second is CTRL+a. If in doubt, use lowercase!

'#'

The hash now sends a Windows keystroke; therefore, Send("#r") would send Win+r which launches the Run dialog box.

You can set SendCapslockMode to make CAPS LOCK disabled at the start of a Send operation and restored upon completion.

However, if a user is holding down the Shift key when a Send function begins, text may be sent in uppercase.

One workaround is to Send("{SHIFTDOWN}{SHIFTUP}") before the other Send operations.

Certain keyboard as the Czech one send different characters when using the Shift Key or being in CAPS LOCK enabled and sending a char. Due to the send AutoIt implementation the CAPS LOCKed char will be sent as Shifted one so it will not work.

Certain special keys can be sent and should be enclosed in braces:

N.B. Windows does not allow the simulation of the "CTRL-ALT-DEL" combination!

Send Command (if zero flag) Resulting Keypress

{!} !

{#} #

{+} +

{^} ^

{{} {

{}} }

{SPACE} SPACE

{ENTER} ENTER key on the main keyboard

{ALT} ALT

{BACKSPACE} or {BS} BACKSPACE

{DELETE} or {DEL} DELETE

{UP} Up arrow

{DOWN} Down arrow

{LEFT} Left arrow

{RIGHT} Right arrow

{HOME} HOME

{END} END

{ESCAPE} or {ESC} ESCAPE

{INSERT} or {INS} INS

{PGUP} PageUp

{PGDN} PageDown

{F1} - {F12} Function keys

{TAB} TAB

{PRINTSCREEN} Print Screen key

{LWIN} Left Windows key

{RWIN} Right Windows key

{NUMLOCK on} NUMLOCK (on/off/toggle)

{CAPSLOCK off} CAPSLOCK (on/off/toggle)

{SCROLLLOCK toggle} SCROLLLOCK (on/off/toggle)

{BREAK} for Ctrl+Break processing

{PAUSE} PAUSE

{NUMPAD0} - {NUMPAD9} Numpad digits

{NUMPADMULT} Numpad Multiply

{NUMPADADD} Numpad Add

{NUMPADSUB} Numpad Subtract

{NUMPADDIV} Numpad Divide

{NUMPADDOT} Numpad period

{NUMPADENTER} Enter key on the numpad

{APPSKEY} Windows App key

{LALT} Left ALT key

{RALT} Right ALT key

{LCTRL} Left CTRL key

{RCTRL} Right CTRL key

{LSHIFT} Left Shift key

{RSHIFT} Right Shift key

{SLEEP} Computer SLEEP key

{ALTDOWN} Holds the ALT key down until {ALTUP} is sent

{SHIFTDOWN} Holds the SHIFT key down until {SHIFTUP} is sent

{CTRLDOWN} Holds the CTRL key down until {CTRLUP} is sent

{LWINDOWN} Holds the left Windows key down until {LWINUP} is sent

{RWINDOWN} Holds the right Windows key down until {RWINUP} is sent

{ASC nnnn} Send the ALT+nnnn key combination

{BROWSER_BACK} 2000/XP Only: Select the browser "back" button

{BROWSER_FORWARD} 2000/XP Only: Select the browser "forward" button

{BROWSER_REFRESH} 2000/XP Only: Select the browser "refresh" button

{BROWSER_STOP} 2000/XP Only: Select the browser "stop" button

{BROWSER_SEARCH} 2000/XP Only: Select the browser "search" button

{BROWSER_FAVORITES} 2000/XP Only: Select the browser "favorites" button

{BROWSER_HOME} 2000/XP Only: Launch the browser and go to the home page

{VOLUME_MUTE} 2000/XP Only: Mute the volume

{VOLUME_DOWN} 2000/XP Only: Reduce the volume

{VOLUME_UP} 2000/XP Only: Increase the volume

{MEDIA_NEXT} 2000/XP Only: Select next track in media player

{MEDIA_PREV} 2000/XP Only: Select previous track in media player

{MEDIA_STOP} 2000/XP Only: Stop media player

{MEDIA_PLAY_PAUSE} 2000/XP Only: Play/pause media player

{LAUNCH_MAIL} 2000/XP Only: Launch the email application

{LAUNCH_MEDIA} 2000/XP Only: Launch media player

{LAUNCH_APP1} 2000/XP Only: Launch user app1

{LAUNCH_APP2} 2000/XP Only: Launch user app2

To send the ASCII value A (same as pressing ALT+065 on the numeric keypad)

Send("{ASC 065}")

(When using 2 digit ASCII codes you must use a leading 0, otherwise an obsolete 437 code page is used).

To send UNICODE characters enter the character code (decimal or hex), for example this sends a Chinese character

Send("{ASC 2709}") or Send("{ASC 0xA95}")

Single keys can also be repeated, e.g.

Send("{DEL 4}") ;Presses the DEL key 4 times

Send("{S 30}") ;Sends 30 'S' characters

Send("+{TAB 4}") ;Presses SHIFT+TAB 4 times

The key will be send at least once even if the count is zero.

To hold a key down (generally only useful for games)

Send("{a down}") ;Holds the A key down

Send("{a up}") ;Releases the A key

To set the state of the capslock, numlock and scrolllock keys

Send("{NumLock on}") ;Turns the NumLock key on

Send("{CapsLock off}") ;Turns the CapsLock key off

Send("{ScrollLock toggle}") ;Toggles the state of ScrollLock

If you wish to use a variable for the count, try

$n = 4

Send("+{TAB " & $n & "}")

If you wish to send the ASCII value A four times, then try

$x = Chr(65)

Send("{" & $x & " 4}")

Most laptop computer keyboards have a special Fn key. This key cannot be simulated.

Note, by setting the flag parameter to 1 the above "special" processing will be disabled. This is useful when you want to send some text copied from a variable and you want the text sent exactly as written.

For example, open Folder Options (in the control panel) and try the following:

Send("{TAB}") Navigate to next control (button, checkbox, etc)

Send("+{TAB}") Navigate to previous control.

Send("^{TAB}") Navigate to next WindowTab (on a Tabbed dialog window)

Send("^+{TAB}") Navigate to previous WindowTab.

Send("{SPACE}") Can be used to toggle a checkbox or click a button.

Send("{+}") Usually checks a checkbox (if it's a "real" checkbox.)

Send("{-}") Usually unchecks a checkbox.

Send("{NumPadMult}") Recursively expands folders in a SysTreeView32.

Use Alt-key combos to access menu items. Also, open Notepad and try the following:

Send("!f") Send Alt+f, the access key for Notepad's file menu. Try other letters!

Send("{DOWN}") Move down a menu.

Send("{UP}") Move up a menu.

Send("{LEFT}") Move leftward to new menu or expand a submenu.

Send("{RIGHT}") Move rightward to new menu or collapse a submenu.

See Windows' Help--press Win+F1--for a complete list of keyboard shortcuts if you don't know the importance of Alt+F4, PrintScreen, Ctrl+C, and so on.

When running a script on a remote computer through a program as psexec (www.sysinternals.com) or beyondexec (www.beyondlogic.org) it is necessary, specially when sending strokes to a program launch by the script with a Run function, to use ControlSend or other ControlXXX functions to directly communicate with the control. Send even with Opt("SendAttachMode",1) is not working.

Using the -s mode when submitting can help to have better right on the remote computer.

Opt("SendKeyDelay",...) alters the the length of the brief pause in between sent keystrokes.

Opt("SendKeyDownDelay",...) alters the length of time a key is held down before being released during a keystroke.

Related

SendAttachmode (Option), SendKeepActive, SendKeyDelay (Option), SendKeyDownDelay (Option), ControlSend

Example

Send("#r")
WinWaitActive("Run")
Send("notepad.exe{Enter}")
WinWaitActive("Untitled -")
Send("Today's time/date is {F5}"
[font="Georgia"]GSM Expert[/font] but not AutoIt :DProud to be Admin Of : http://www.gsmhosting.net/visit my Forum... http://www.gsmhosting.net/vbb/index.php
$Life = "Happy"
If @Error Then
$Life = "Risk"
Link to comment
Share on other sites

@ D4rk^S0ul

i did not write any script for him. i was just telling him to read the helpFile and learn it yourself.

Edited by zFrank
[font="Georgia"]GSM Expert[/font] but not AutoIt :DProud to be Admin Of : http://www.gsmhosting.net/visit my Forum... http://www.gsmhosting.net/vbb/index.php
$Life = "Happy"
If @Error Then
$Life = "Risk"
Link to comment
Share on other sites

I have two questions. The first: How can I read hex-dump from any files using Autoit_v3??? It is really? And question #2: Does exist a program for easy creating GUI, somthing like SmartGui for Ahk scripts but for Autoit_v3?

_____________________________________________________________________________

Link to comment
Share on other sites

@ Vitas

I have two questions. The first: How can I read hex-dump from any files using Autoit_v3??? It is really? And question #2: Does exist a program for easy creating GUI, somthing like SmartGui for Ahk scripts but for Autoit_v3?

#1: i dont know

#2: its name is koda download it from here:

http://www.autoitscript.com/fileman/users/lookfar/formdesign.html

[font="Georgia"]GSM Expert[/font] but not AutoIt :DProud to be Admin Of : http://www.gsmhosting.net/visit my Forum... http://www.gsmhosting.net/vbb/index.php
$Life = "Happy"
If @Error Then
$Life = "Risk"
Link to comment
Share on other sites

I have just reinstalled autoit because of some really random errors i was gettin (didnt fix but i figured it out), and i just looked it does come with guibuilder but it also comes with koda which i didnt relise, never used it myself its prob better then guibuilder but i only use them for simple things where guibuilder is small and quick but koda seems to have alot more functions and is like a VB gui builder.

Link to comment
Share on other sites

  • Developers

I have just reinstalled autoit because of some really random errors i was gettin (didnt fix but i figured it out), and i just looked it does come with guibuilder but it also comes with koda which i didnt relise, never used it myself its prob better then guibuilder but i only use them for simple things where guibuilder is small and quick but koda seems to have alot more functions and is like a VB gui builder.

AutoIt3 does not come with GuiBuilder. SciTE4AutoIt3 did have it but it has not been in the installer for a while now so I have no idea what you are talking about here?

Also have no idea what this all has to do with the OP's topic.

@Vitas, Not sure why you decided to post your question in this topic but it doesn't look related.

Jos

Edited by Jos

SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource   Forum etiquette  Forum Rules 
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Link to comment
Share on other sites

Question #2 closed, its already good. But question №1(hex-dump with Autoit_v3) was main, because I want to write archivator on

Autoit(with invented myself compression methods (hight compression already compressed files and compression different bytes without loss of quality!!)). It was

possible on C++, but it will take more time. Anybody show can find any need information or have a .dll with hex read/write function,

please, send me e-mail www.antixt@mail.ru

Thanks and good night!:P

_____________________________________________________________________________

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...