waltv7 Posted December 13, 2008 Share Posted December 13, 2008 Ok here is my messy code forgive me I am new and I had to borrow some code to. But most was writen by me. I am wanting this to send all the info in the input fields to the edit box after I have opened a file into the edit box. expandcollapse popup;Mud Wold editing program round 2 #include <GUIConstants.au3> #include <Misc.au3> #include <String.au3> #include <EditConstants.au3> #include <WindowsConstants.au3> #include <File.au3> ;$openfile = "" ;#include <GUIConstants.au3> ;Global $textout, $file ;$file = FileOpen("C:\15.wld", 0) ;$textread = FileRead($file) #Region ### START Koda GUI section ### Form= $Form1 = GUICreate("MUD World Room Creator", 1070, 449, 5, 123) $roomnum = GUICtrlCreateInput("", 24, 32, 57, 21) $roomname = GUICtrlCreateInput("", 104, 32, 225, 21) $roomdesc = GUICtrlCreateEdit("", 24, 72, 305, 105) $Label1 = GUICtrlCreateLabel("Room Number", 24, 8, 72, 17) $Label2 = GUICtrlCreateLabel("Room Name", 104, 8, 63, 17) $Label3 = GUICtrlCreateLabel("Room Description", 24, 56, 88, 17) $Label4 = GUICtrlCreateLabel("Zone Number", 24, 184, 69, 17) $zonenum = GUICtrlCreateInput("", 24, 208, 65, 21) $bitvector = GUICtrlCreateCombo("", 104, 208, 97, 25) GUICtrlSetData(-1, "a DARK|b DEATH|c NO MOB|d INDOORS|e PEACEFUL|f SOUNDPROOF|g NOTRACK|h NOMAGIC|i TUNNEL|j PRIVATE|k GODROOM", "d INDOORS") $Label5 = GUICtrlCreateLabel("Bit Vector", 104, 184, 50, 17) $morevec = GUICtrlCreateInput("", 208, 208, 89, 21) $Label17 = GUICtrlCreateLabel("Aditional Bit Vector", 208, 184, 93, 17) $roomter = GUICtrlCreateCombo(" ", 304, 208, 89, 25) GUICtrlSetData(-1, "0 INSIDE|1 CITY|2 FIELD|3 FOREST|4 HILLS|5 MOUNTAIN|6 WATER_SWIM|7 WATER_NOSWIM|8 FLYING|9 UNDERWATER", "0 INSIDE") $Label6 = GUICtrlCreateLabel("Room Terrain", 304, 184, 68, 17) $northc = GUICtrlCreateCheckbox("Checkbox1", 24, 256, 17, 17) $eastc = GUICtrlCreateCheckbox("Checkbox2", 24, 288, 17, 17) $southc = GUICtrlCreateCheckbox("Checkbox3", 24, 320, 17, 17) $westc = GUICtrlCreateCheckbox("Checkbox4", 24, 352, 17, 17) $upc = GUICtrlCreateCheckbox("Checkbox5", 24, 384, 17, 17) $downc = GUICtrlCreateCheckbox("Checkbox6", 24, 416, 17, 17) $Label7 = GUICtrlCreateLabel("Exits", 24, 232, 26, 17) $Label8 = GUICtrlCreateLabel("North", 40, 256, 30, 17) $Label9 = GUICtrlCreateLabel("East", 40, 288, 25, 17) $Label10 = GUICtrlCreateLabel("South", 40, 320, 32, 17) $Label11 = GUICtrlCreateLabel("West", 40, 352, 29, 17) $Label12 = GUICtrlCreateLabel("Up", 40, 384, 18, 17) $Label13 = GUICtrlCreateLabel("Down", 40, 416, 32, 17) $doorn = GUICtrlCreateCombo("", 80, 248, 81, 25) GUICtrlSetData(-1, "0 No Door|1 Door|2 PP Door", "") $doore = GUICtrlCreateCombo("", 80, 280, 81, 25) GUICtrlSetData(-1, "0 No Door|1 Door|2 PP Door", "") $doors = GUICtrlCreateCombo("", 80, 312, 81, 25) GUICtrlSetData(-1, "0 No Door|1 Door|2 PP Door", "") $doorw = GUICtrlCreateCombo("", 80, 344, 81, 25) GUICtrlSetData(-1, "0 No Door|1 Door|2 PP Door", "") $dooru = GUICtrlCreateCombo("", 80, 376, 81, 25) GUICtrlSetData(-1, "0 No Door|1 Door|2 PP Door", "") $doord = GUICtrlCreateCombo("", 80, 408, 81, 25) GUICtrlSetData(-1, "0 No Door|1 Door|2 PP Door", "") $keynumn = GUICtrlCreateInput("", 176, 248, 73, 21) $keynume = GUICtrlCreateInput("", 176, 280, 73, 21) $keynums = GUICtrlCreateInput("", 176, 312, 73, 21) $keynumw = GUICtrlCreateInput("", 176, 344, 73, 21) $keynumu = GUICtrlCreateInput("", 176, 376, 73, 21) $keynumd = GUICtrlCreateInput("", 176, 408, 73, 21) $lookn = GUICtrlCreateInput("", 272, 248, 241, 21) $looke = GUICtrlCreateInput("", 272, 280, 241, 21) $looks = GUICtrlCreateInput("", 272, 312, 241, 21) $lookw = GUICtrlCreateInput("", 272, 344, 241, 21) $looku = GUICtrlCreateInput("", 272, 376, 241, 21) $lookd = GUICtrlCreateInput("", 272, 408, 241, 21) $makecode = GUICtrlCreateButton("Generate Code", 368, 24, 217, 33, 0) $exit = GUICtrlCreateButton("Exit", 368, 72, 217, 33, 0) $Label14 = GUICtrlCreateLabel("Door Options", 80, 232, 66, 17) $Label15 = GUICtrlCreateLabel("Door Key #", 176, 232, 58, 17) $Label16 = GUICtrlCreateLabel("Direction Look", 272, 232, 73, 17) $nout = GUICtrlCreateInput("", 528, 248, 89, 21) $eout = GUICtrlCreateInput("", 528, 280, 89, 21) $sout = GUICtrlCreateInput("", 528, 312, 89, 21) $wout = GUICtrlCreateInput("", 528, 344, 89, 21) $uout = GUICtrlCreateInput("", 528, 376, 89, 21) $dout = GUICtrlCreateInput("", 528, 408, 89, 21) $File = GUICtrlCreateMenu("File") $New = GUICtrlCreateMenuItem("New", $File) $Open = GUICtrlCreateMenuItem("Open...", $File) $Save = GUICtrlCreateMenuItem("Save", $File) $SaveAs = GUICtrlCreateMenuItem("Save As...", $File) GUICtrlCreateMenuItem("", $File) $Print = GUICtrlCreateMenuItem("Print...", $File) GUICtrlCreateMenuItem("", $File) $Exit = GUICtrlCreateMenuItem("Exit", $File) $Edit = GUICtrlCreateMenu("Edit") $Undo = GUICtrlCreateMenuItem("Undo", $Edit) GUICtrlCreateMenuItem("", $Edit) $Cut = GUICtrlCreateMenuItem("Cut", $Edit) $Copy = GUICtrlCreateMenuItem("Copy", $Edit) $Paste = GUICtrlCreateMenuItem("Paste", $Edit) $Delete = GUICtrlCreateMenuItem("Delete", $Edit) GUICtrlCreateMenuItem("", $Edit) $SelectAll = GUICtrlCreateMenuItem("Select All", $Edit) $Time = GUICtrlCreateMenuItem("Time/Date", $Edit) $Show = GUICtrlCreateMenu("Show") $Font = GUICtrlCreateMenuItem("Font...", $Show) $Help = GUICtrlCreateMenu("Help") $About = GUICtrlCreateMenuItem("About", $Help) $Extra = GUICtrlCreateMenu("Extra") $Count = GUICtrlCreateMenuItem("Count...", $Extra) $Reverse = GUICtrlCreateMenuItem("Reverse Text", $Extra) $Hex = GUICtrlCreateMenuItem("Hex Text", $Extra) $UnHex = GUICtrlCreateMenuItem("UnHex Text", $Extra) $Encrypt = GUICtrlCreateMenuItem("Encrypt Text...", $Extra) $EditField = GUICtrlCreateEdit("", 632, 24, 433, 409) Global $GUI, $fod_save ;GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### ;GUICtrlSetData($textout, "") $exitcheck = 1 GUISetState() While 1 $nMsg = GUIGetMsg() Select Case $nMsg = $GUI_EVENT_CLOSE _Exit() Case $nMsg = $New _New() Case $nMsg = $Open _Open() Case $nMsg = $Save _Save() Case $nMsg = $SaveAs _SaveAs() Case $nMsg = $Print _Print() Case $nMsg = $Exit _Exit() Case $nMsg = $Undo Sleep(100) Send("^z") Case $nMsg = $Cut Sleep(100) Send("^x") Case $nMsg = $Copy Sleep(100) Send("^c") Case $nmsg = $Paste Sleep(100) Send("^v") Case $nMsg = $Delete Sleep(100) Send("{DELETE}") Case $nMsg = $SelectAll Sleep(100) Send("{TAB}") Case $nMsg = $Time $TimeDate = @HOUR & ":" & @MIN & " " & @MDAY & "-" & @MON & "-" & @YEAR Sleep(100) Send($TimeDate) Case $nMsg = $Font $aFont = _ChooseFont("", "", "", "", "", "", "", $GUI) If $aFont <> -1 Then GUICtrlSetFont($EditField, $aFont[3], $aFont[4], $aFont[1], $aFont[2]) GUICtrlSetColor($EditField, $aFont[7]) EndIf Case $nMsg = $About MsgBox(64, "About", "Notepad Example made by" & @CRLF & "AlmarM") Case $nMsg = $Count _Count() Case $nMsg = $Reverse _Reverse() Case $nMsg = $Hex _Hex() Case $nMsg = $UnHex _UnHex() Case $nMsg = $Encrypt _Encrypt(GUICtrlRead($EditField)) EndSelect WEnd Func _New() If GUICtrlRead($EditField) <> "" Then $MsgBox = MsgBox(51, "", "Save text first?") If $MsgBox = 6 Then $read_text = GUICtrlRead($EditField) $fod_new_save = FileSaveDialog("Save...", @DesktopDir, "World Files (*.wld)", 18, "", $GUI) FileWrite($fod_new_save & ".wld", $read_text) GUICtrlSetData($EditField, "") ElseIf $MsgBox = 7 Then GUICtrlSetData($EditField, "") Else EndIf Else GUICtrlSetData($EditField, "") EndIf EndFunc Func _Open() If GUICtrlRead($EditField) <> "" Then $MsgBox = MsgBox(51, "", "Save text first?") If $MsgBox = 6 Then $read_text = GUICtrlRead($EditField) $fod_open_save = FileSaveDialog("Save...", @DesktopDir, "World Files (*.wld)", 18, "", $GUI) FileWrite($fod_open_save & ".wld", $read_text) $fod_open = FileOpenDialog("Open...", @DesktopDir, "World Files (*.wld)", 11, "", $GUI) $read = FileRead($fod_open) GUICtrlSetData($EditField, $read) ElseIf $MsgBox = 7 Then $fod_open = FileOpenDialog("Open...", @DesktopDir, "World Files (*.wld)", 11, "", $GUI) $read = FileRead($fod_open) $gettitle = WinGetTitle("[CLASS:AutoIt v3 GUI]") WinSetTitle($gettitle, "", $fod_open) GUICtrlSetData($EditField, $read) Else EndIf Else $fod_open = FileOpenDialog("Open...", @DesktopDir, "World Files (*.wld)", 11, "", $GUI) $read = FileRead($fod_open) $gettitle = WinGetTitle("[CLASS:AutoIt v3 GUI]") WinSetTitle($gettitle, "", $fod_open) GUICtrlSetData($EditField, $read) EndIf EndFunc Func _Save() If WinGetTitle("[CLASS:AutoIt v3 GUI]") <> "Notepad Example" Then $gettitle = WinGetTitle("[CLASS:AutoIt v3 GUI]") FileWrite($gettitle, GUICtrlRead($EditField)) Else $fod_save = FileSaveDialog("Save...", @DesktopDir, "World Files (*.wld)", 18, "", $GUI) If $fod_save <> "" Then $read = GUICtrlRead($EditField) FileWrite($fod_save & ".wld", $read) WinSetTitle(WinGetTitle("[CLASS:AutoIt v3 GUI]"), "", $fod_save) EndIf EndIf EndFunc Func _SaveAs() $fod_saveas = FileSaveDialog("Save As...", @DesktopDir, "World Files (*.wld)", 18, "", $GUI) If $fod_saveas <> "" Then $read = GUICtrlRead($EditField) FileWrite($fod_save & ".wld", $read) EndIf EndFunc Func _Print() $Read = GUICtrlRead($EditField) $Random = Random(000000, 999999, 1) $x = FileWrite(@TempDir & "\$~" & $Random & ".wld", $Read) $File = @TempDir & "\$~" & $Random & ".wld" _FilePrint($File) Sleep(1000) FileDelete($File) EndFunc Func _Count() $Words = StringSplit(GUICtrlRead($EditField), " ") $xWords = $Words[0] MsgBox(0, "", "Total: " & StringLen(GUICtrlRead($EditField)) & @CRLF & "Total Words: " & $xWords & @CRLF & "10 Most Left: " & StringLeft(GUICtrlRead($EditField), 10) & @CRLF & "10 Most Right: " & _ StringRight(GUICtrlRead($EditField), 10)) EndFunc Func _Reverse() $read = GUICtrlRead($EditField) $rev = _StringReverse($read) GUICtrlSetData($EditField, $rev) EndFunc Func _Hex() $Read = GUICtrlRead($EditField) $x = _StringToHex($Read) GUICtrlSetData($EditField, $x) EndFunc Func _UnHex() $Read = GUICtrlRead($EditField) $x = _HexToString($Read) GUICtrlSetData($EditField, $x) EndFunc Func _Encrypt($nText) $Main = GUICreate("Encrypt", 400, 400, -1, -1) $EditText = GUICtrlCreateEdit("", 5, 5, 390, 350) GUICtrlSetData($EditText, $nText) $InputPass = GUICtrlCreateInput("", 5, 360, 100, 20, BitOR($ES_PASSWORD, $ES_CENTER)) $InputLevel = GUICtrlCreateInput("1", 110, 360, 50, 20, $SM_REMOTECONTROL) $UpDown = GUICtrlCreateUpDown($InputLevel) GUICtrlSetLimit($UpDown, 10, 1) $EncryptButton = GUICtrlCreateButton("Encrypt", 170, 360, 105, 35) $DecryptButton = GUICtrlCreateButton("Decrypt", 285, 360, 105, 35) GUISetState() While 1 $nMsg = GUIGetMsg() Select Case $nMsg = $GUI_EVENT_CLOSE GUIDelete($Main) ExitLoop Case $nMsg = $EncryptButton $Read_Text = GUICtrlRead($EditText) $Read_Level = GUICtrlRead($InputPass) $Read_Pass = GUICtrlRead($InputPass) GUICtrlSetData($EditText, "Encrypting...") $x = _StringEncrypt(1, $Read_Text, $Read_Pass, $Read_Level) GUICtrlSetData($EditText, $x) Case $nmsg = $DecryptButton $Read_Text = GUICtrlRead($EditText) $Read_Level = GUICtrlRead($InputPass) $Read_Pass = GUICtrlRead($InputPass) GUICtrlSetData($EditText, "Decrypting...") $x = _StringEncrypt(0, $Read_Text, $Read_Pass, $Read_Level) GUICtrlSetData($EditText, $x) EndSelect WEnd EndFunc Func _Exit() If GUICtrlRead($EditField) <> "" Then $MsgBox = MsgBox(51, "", "Save text first?") If $MsgBox = 6 Then $read_text = GUICtrlRead($EditField) $fod_new_save = FileSaveDialog("Save...", @DesktopDir, "Text Files (*.wld)", 18, "", $GUI) FileWrite($fod_new_save & ".wld", $read_text) GUICtrlSetData($EditField, "") ElseIf $MsgBox = 7 Then Exit Else EndIf Else Exit EndIf EndFunc While $exitcheck = 1 Select Case $nMsg = $GUI_EVENT_CLOSE ExitLoop Case $nMsg = $makecode If GUICtrlRead($bitvector) = "a DARK" Then $bitvec = "a" ElseIf GUICtrlRead($bitvector) = "b DEATH" Then $bitvec = "b" ElseIf GUICtrlRead($bitvector) = "c NO MOB" Then $bitvec = "c" ElseIf GUICtrlRead($bitvector) = "d INDOORS" Then $bitvec = "d" ElseIf GUICtrlRead($bitvector) = "e PEACFUL" Then $bitvec = "e" ElseIf GUICtrlRead($bitvector) = "f SOUNDPROOF" Then $bitvec = "f" ElseIf GUICtrlRead($bitvector) = "g NOTRACK" Then $bitvec = "g" ElseIf GUICtrlRead($bitvector) = "h NOMAGIC" Then $bitvec = "h" ElseIf GUICtrlRead($bitvector) = "i TUNNEL" Then $bitvec = "i" ElseIf GUICtrlRead($bitvector) = "j PRIVATE" Then $bitvec = "j" ElseIf GUICtrlRead($bitvector) = "k GODROOM" Then $bitvec = "k" EndIf If GUICtrlRead($roomter) = "0 INSIDE" Then $tertype = "0" ElseIf GUICtrlRead($roomter) = "1 CITY" Then $tertype = "1" ElseIf GUICtrlRead($roomter) = "2 FIELD" Then $tertype = "2" ElseIf GUICtrlRead($roomter) = "3 FOREST" Then $tertype = "3" ElseIf GUICtrlRead($roomter) = "4 HILLS" Then $tertype = "4" ElseIf GUICtrlRead($roomter) = "5 MOUNTAIN" Then $tertype = "5" ElseIf GUICtrlRead($roomter) = "6 WATER_SWIM" Then $tertype = "6" ElseIf GUICtrlRead($roomter) = "7 WATER_NOSWIM" Then $tertype = "7" ElseIf GUICtrlRead($roomter) = "8 FLYING" Then $tertype = "8" ElseIf GUICtrlRead($roomter) = "9 UNDERWATER" Then $tertype = "9" EndIf GUISetState($northc) If GUICtrlRead($northc) = "1" Then $dirn = "D0" If GUICtrlRead($doorn) = "0 No Door" Then $ndoor = "0" $nkey = "-1" ElseIf GUICtrlRead($doorn) = "1 Door" Then $ndoor = "1" $nkey = GUICtrlRead($keynumn) Else $ndoor = "2" $nkey = GUICtrlRead($keynumn) EndIf EndIf GUISetState($eastc) If GUICtrlRead($eastc) = "1" Then $dire = "D1" If GUICtrlRead($doore) = "0 No Door" Then $edoor = "0" $ekey = "-1" ElseIf GUICtrlRead($doore) = "1 Door" Then $edoor = "1" $ekey = GUICtrlRead($keynume) Else $edoor = "2" $ekey = GUICtrlRead($keynume) EndIf EndIf GUISetState($southc) If GUICtrlRead($southc) = "1" Then $dirs = "D2" If GUICtrlRead($doors) = "0 No Door" Then $sdoor = "0" $skey = "-1" ElseIf GUICtrlRead($doors) = "1 Door" Then $sdoor = "1" $skey = GUICtrlRead($keynums) Else $sdoor = "2" $skey = GUICtrlRead($keynums) EndIf EndIf GUISetState($westc) If GUICtrlRead($westc) = "1" Then $dirw = "D3" If GUICtrlRead($doorw) = "0 No Door" Then $wdoor = "0" $wkey = "-1" ElseIf GUICtrlRead($doorw) = "1 Door" Then $wdoor = "1" $wkey = GUICtrlRead($keynumw) Else $wdoor = "2" $wkey = GUICtrlRead($keynumw) EndIf EndIf GUISetState($upc) If GUICtrlRead($upc) = "1" Then $diru = "D4" If GUICtrlRead($dooru) = "0 No Door" Then $udoor = "0" $ukey = "-1" ElseIf GUICtrlRead($dooru) = "1 Door" Then $udoor = "1" $ukey = GUICtrlRead($keynumu) Else $udoor = "2" $ukey = GUICtrlRead($keynumu) EndIf EndIf GUISetState($downc) If GUICtrlRead($downc) = "1" Then $dird = "D5" If GUICtrlRead($doord) = "0 No Door" Then $ddoor = "0" $dkey = "-1" ElseIf GUICtrlRead($doord) = "1 Door" Then $ddoor = "1" $dkey = GUICtrlRead($keynumd) Else $ddoor = "2" $dkey = GUICtrlRead($keynumd) EndIf EndIf ; FileWrite($file, "S" & @CRLF) Case $nMsg = $exit ExitLoop EndSelect GUICtrlSetData($EditField, GUICtrlRead($roomnum) & @CRLF & GUICtrlRead($roomname) & @CRLF & GUICtrlRead($roomdesc) & @CRLF) GUICtrlSetData($EditField, "~" & @CRLF & GUICtrlRead($zonenum) & " " & $bitvec & GUICtrlRead($morevec) & " " & $tertype & @CRLF) GUICtrlSetData($EditField, $dirn & @CRLF & GUICtrlRead($lookn) & @CRLF & "~" & @CRLF & "~" & @CRLF) GUICtrlSetData($EditField, $ndoor & " " & $nkey & " " & GUICtrlRead($nout) & @CRLF & $dire & @CRLF & GUICtrlRead($looke) & @CRLF) GUICtrlSetData($EditField, "~" & @CRLF & "~" & @CRLF & $edoor & " " & $ekey & " " & GUICtrlRead($eout) & @CRLF & $dirs & @CRLF) GUICtrlSetData($EditField, GUICtrlRead($looks) & @CRLF & "~" & @CRLF & "~" & @CRLF & $sdoor & " " & $skey & " " & GUICtrlRead($sout) & @CRLF) GUICtrlSetData($EditField, $dirw & @CRLF & GUICtrlRead($lookw) & @CRLF & "~" & @CRLF & "~" & @CRLF) GUICtrlSetData($EditField, $wdoor & " " & $wkey & " " & GUICtrlRead($wout) & @CRLF & $diru & @CRLF & GUICtrlRead($looku) & @CRLF) GUICtrlSetData($EditField, "~" & @CRLF & "~" & @CRLF & $udoor & " " & $ukey & " " & GUICtrlRead($uout) & @CRLF & $dird & @CRLF) GUICtrlSetData($EditField, GUICtrlRead($lookd) & @CRLF & "~" & @CRLF & "~" & @CRLF & $ddoor & " " & $dkey & " " & GUICtrlRead($dout) & @CRLF) WEnd Link to comment Share on other sites More sharing options...
martin Posted December 13, 2008 Share Posted December 13, 2008 I am wanting this to send all the info in the input fields to the edit box after I have opened a file into the edit box.What does this mean?after I have opened a file into the edit box.Can you explain what you want to do a bit more clearly? You have 32 edits so are you talking about $EditField?Do upu want the text in each input to be displayed somehow in $EditField? Serial port communications UDF Includes functions for binary transmission and reception.printing UDF Useful for graphs, forms, labels, reports etc.Add User Call Tips to SciTE for functions in UDFs not included with AutoIt and for your own scripts.Functions with parameters in OnEvent mode and for Hot Keys One function replaces GuiSetOnEvent, GuiCtrlSetOnEvent and HotKeySet.UDF IsConnected2 for notification of status of connected state of many urls or IPs, without slowing the script. Link to comment Share on other sites More sharing options...
waltv7 Posted December 14, 2008 Author Share Posted December 14, 2008 What does this mean?Can you explain what you want to do a bit more clearly? You have 32 edits so are you talking about $EditField?Do upu want the text in each input to be displayed somehow in $EditField?Well you said exactly what I want all the text in each input displayed in $EditField Link to comment Share on other sites More sharing options...
martin Posted December 14, 2008 Share Posted December 14, 2008 (edited) Well you said exactly what I want all the text in each input displayed in $EditFieldAll you have to do is to get the text from each edit using something like $text1 = GuiCtrlRead($edit1) And you can write whatever you want to the big edit with something like GuiCtrlSetData($EditField,$text1 @ @CRLF,1); ,1 to append the text to whats already in the edit rather than replace it. Or do something like $text = '' $text &= "item 1 = " & guiCtrlRead($edit1) & @CRLF $text &= "Door option chosen = " & Guictrlread($edit2) & @CRLF ;etc GuictrlSetData($EditField,$text) EDIT:spelling Edited December 14, 2008 by martin Serial port communications UDF Includes functions for binary transmission and reception.printing UDF Useful for graphs, forms, labels, reports etc.Add User Call Tips to SciTE for functions in UDFs not included with AutoIt and for your own scripts.Functions with parameters in OnEvent mode and for Hot Keys One function replaces GuiSetOnEvent, GuiCtrlSetOnEvent and HotKeySet.UDF IsConnected2 for notification of status of connected state of many urls or IPs, without slowing the script. Link to comment Share on other sites More sharing options...
AlmarM Posted December 15, 2008 Share Posted December 15, 2008 Haha ^^, you borrowed some code from me , thats cool AlmarM Minesweeper A minesweeper game created in autoit, source available. _Mouse_UDF An UDF for registering functions to mouse events, made in pure autoit. 2D Hitbox Editor A 2D hitbox editor for quick creation of 2D sphere and rectangle hitboxes. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now