LukeJrs Posted January 3, 2009 Share Posted January 3, 2009 (edited) Everytime i tried get an address to read the value i get zero on return value when should be 99 minesweeper I try mess with permedit & setprivilege but i know i'm doing something wrong. #include <NomadMemory.au3> #include <array.au3> #Include <Security.au3> $pid = WinGetProcess("Minesweeper") _Security__SetPrivilege($pid, "Games", "True") MsgBox(0,"","PID: " & $pid ) $OpenProccess = _MemoryOpen($pid) If @error Then MsgBox(0,"error","error opening process.") Exit EndIf $Read = _MemoryRead($OpenProccess, 0x1B13E34, 4); <------i know s a DMA Address. I'm just trying get the value for the address im using cheat engine to get address search everytime i lunch minesweeper If IsArray($Read) Then _ArrayDisplay($Read, "Read Var" ) EndIf MsgBox(0,$Read, $Read) _MemoryClose($OpenProccess) I really need just a basic return value oto the address assing to it. Edited January 3, 2009 by LukeJrs Link to comment Share on other sites More sharing options...
CoolPenguin Posted January 3, 2009 Share Posted January 3, 2009 Try: SetPrivilege("SeDebugPrivilege", 1) Link to comment Share on other sites More sharing options...
LukeJrs Posted January 3, 2009 Author Share Posted January 3, 2009 Try:SetPrivilege("SeDebugPrivilege", 1)doesnt seen to work it still give me null result which is zero.. any other method? Link to comment Share on other sites More sharing options...
AwAke Posted January 3, 2009 Share Posted January 3, 2009 (edited) Sorry to 'Hijack' your thread but I hope you dont mind me throwing in one single question, no one seemed to have answered in my thread yet. I used Cheat Engine to find the memory address of my HP in WoW and it returned "1F35CFB8". How did you come around getting your memory address to have '0x' infront of it? Do I just put the '0x' in front of it like so, '0x1F35CFB8' or is there some math calculation to it? Once again sorry for jacking your thread, you have my upmost apologies. Edited January 3, 2009 by AwAke Link to comment Share on other sites More sharing options...
LukeJrs Posted January 3, 2009 Author Share Posted January 3, 2009 Sorry to 'Hijack' your thread but I hope you dont mind me throwing in one single question, no one seemed to have answered in my thread yet. I used Cheat Engine to find the memory address of my HP in WoW and it returned "1F35CFB8".How did you come around getting your memory address to have '0x' infront of it?Do I just put the '0x' in front of it like so, '0x1F35CFB8' or is there some math calculation to it?Once again sorry for jacking your thread, you have my upmost apologies.lol just put 0x on it ^^ that how memoryread ^^ Link to comment Share on other sites More sharing options...
AwAke Posted January 3, 2009 Share Posted January 3, 2009 Ah ok, thank you for your reply. I am now left with the same problem as you, all my _readmemory's return 0. =[ Link to comment Share on other sites More sharing options...
LukeJrs Posted January 4, 2009 Author Share Posted January 4, 2009 (edited) Ah ok, thank you for your reply. I am now left with the same problem as you, all my _readmemory's return 0. =[ LOL I fix my issue lack of admin provilege expandcollapse popup;Function Reference ;IsAdmin ;-------------------------------------------------------------------------------- ;Checks if the current user has full administrator privileges. ;IsAdmin ( ) ;Parameters ;None. ;Return Value ;Success: Returns 1 if the current user has administrator privileges. ;Failure: Returns 0 if user lacks admin privileges. ;Remarks ;It returns 1 under Windows Vista only if running with a full administrator token (i.e. #RequireAdmin has been used, or has already been elevated by UAC). ;Related #RequireAdmin ;Example If IsAdmin() Then MsgBox(0, "", "Admin rights detected") To check if you have admin right type this If IsAdmin() Then MsgBox(0, "", "Admin rights detected") else MsgBox(0, "", "use the #RequireAdmin on include to enable script to run admin in order to show true value.") endif or turn off UAC by going to run then type msconfig --> tool then disable uac lunch or command promp and type C:\Windows\System32\cmd.exe /k %windir%\System32\reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v EnableLUA /t REG_DWORD /d 0 /f to disable it then restart . you will be all set then u will no longer need the #RequireAdmin Your value should show now ^^ Edited January 4, 2009 by LukeJrs Link to comment Share on other sites More sharing options...
AwAke Posted January 4, 2009 Share Posted January 4, 2009 (edited) Ah I see that your running Vista as your operating system, however I am running Windows XP and I have no admin problems. Thank you for the help you are giving me but may I ask you to review my code and see if you can spot my problem. Sorry for causing you such hassle which I presume you could do without, if you have the time I would deeply appreciate your expertise in looking over my code; #Include <NomadMemory.au3> #Include <Array.au3> SetPrivilege("SeDebugPrivilege", 1) $address = 0x1F35CFB8 $Handle = _memoryopen(WinGetProcess("World Of Warcraft")) $addressread = _MemoryRead($address, $Handle, 'dword') MsgBox(0, "", $addressread) _MemoryClose($Handle) I know that the address is dynamic and will change upon restart of the client however that isnt my concern right now its just getting the code to work. I can also add that the type of the memory may not be dword however im unsure with this. I found the memory address using cheat engine with the scan type being, 'text'. I hope that can help you, once again thank you. =] Edited January 4, 2009 by AwAke Link to comment Share on other sites More sharing options...
LukeJrs Posted January 4, 2009 Author Share Posted January 4, 2009 Ah I see that your running Vista as your operating system, however I am running Windows XP and I have no admin problems. Thank you for the help you are giving me but may I ask you to review my code and see if you can spot my problem. Sorry for causing you such hassle which I presume you could do without, if you have the time I would deeply appreciate your expertise in looking over my code; #Include <NomadMemory.au3> #Include <Array.au3> SetPrivilege("SeDebugPrivilege", 1) $address = 0x1F35CFB8 $Handle = _memoryopen(WinGetProcess("World Of Warcraft")) $addressread = _MemoryRead($address, $Handle, 'dword') MsgBox(0, "", $addressread) _MemoryClose($Handle) I know that the address is dynamic and will change upon restart of the client however that isnt my concern right now its just getting the code to work. I can also add that the type of the memory may not be dword however im unsure with this. I found the memory address using cheat engine with the scan type being, 'text'. I hope that can help you, once again thank you. =] Here is a working template i'm using by nomad expandcollapse popup;====================================================================== ; AutoIt Version: 3.1.127 (beta) ; Language: English ; Platform: Win9x/NT or newer ; Author: Nomad ; Requirements: ; This function will only work with beta and my _Mem() functions. ;====================================================================== ; Purpose: ; A demonstration of how to use my Mem() functions. ; This script returns a Diablo II player's name. ;====================================================================== ; Additional: ; Please remember to credit accordingly for any use of this script. ;====================================================================== ;################################## ;Include my Mem() functions ;################################## #include <Memory.au3> ;################################## ;Get the process ID. ;If you get an incorrect reading, ;then you may need administrative ;rights enabled. ;################################## Opt("WinTitleMatchMode", 4) Global $ProcessID = WinGetProcess("ClassName=TNosTaleMainF","") If $ProcessID = -1 Then MsgBox(4096, "ERROR", "Failed to detect process.") Exit EndIf #cs run this to check if you have administrative rights. If Not IsAdmin() Then Msgbox(4096, "Administrative Rights", "You do not have administrative rights.") EndIf #ce ;################################## ;Call the function for reading ;your current strength. ;################################## $PlayerName = Read_Diablo_Memory () MsgBox(4096, "Name", $PlayerName) Exit ;################################## ;Function ;################################## Func Read_Diablo_Memory () ;################################## ;Define Local Variables ;################################## Local $Value ;################################## ;Open the Diablo II process using ;the Process ID retrieved from ;ProcessExists above. ;################################## Local $DllInformation = _MemoryOpen($ProcessID) If @Error Then MsgBox(4096, "ERROR", "Failed to open memory.") Exit EndIf ;################################## ;Read the process and get the ;players name. You need to set ;the 'type' to 'char', and Diablo II ;names can be up to 15 characters in ;length, so you need to put 'char[16]' ;as the parameter. =P ;################################## $Value = _MemoryRead(0x0fce4f28, $DllInformation, 'char[16]') If @Error Then MsgBox(4096, "ERROR", "Failed to read memory.") Exit EndIf ;################################## ;Close the process. ;################################## _MemoryClose($DllInformation) If @Error Then MsgBox(4096, "ERROR", "Failed to close memory.") Exit EndIf ;################################## ;Return the name value. ;################################## Return $Value EndFunc This is Memory.au3 by nomad expandcollapse popup#include-once #region _Memory ;================================================================================================= ; AutoIt Version: 3.1.127 (beta) ; Language: English ; Platform: All Windows ; Author: Nomad ; Requirements: These functions will only work with beta. ;================================================================================================= ; Credits: wOuter - These functions are based on his original _Mem() functions. But they are ; easier to comprehend and more reliable. These functions are in no way a direct copy ; of his functions. His functions only provided a foundation from which these evolved. ;================================================================================================= ; ; Functions: ; ;================================================================================================= ; Function: _MemoryOpen($iv_Pid[, $iv_DesiredAccess[, $iv_InheritHandle]]) ; Description: Opens a process and enables all possible access rights to the process. The ; Process ID of the process is used to specify which process to open. You must ; call this function before calling _MemoryClose(), _MemoryRead(), or _MemoryWrite(). ; Parameter(s): $iv_Pid - The Process ID of the program you want to open. ; $iv_DesiredAccess - (optional) Set to 0x1F0FFF by default, which enables all ; possible access rights to the process specified by the ; Process ID. ; $if_InheritHandle - (optional) If this value is TRUE, all processes created by ; this process will inherit the access handle. Set to TRUE ; (1) by default. Set to 0 if you want it to be FALSE. ; Requirement(s): A valid process ID. ; Return Value(s): On Success - Returns an array containing the Dll handle and an open handle to ; the specified process. ; On Failure - Returns 0 ; @Error - 0 = No error. ; 1 = Invalid $iv_Pid. ; 2 = Failed to open Kernel32.dll. ; 3 = Failed to open the specified process. ; Author(s): Nomad ; Note(s): ;================================================================================================= Func _MemoryOpen($iv_Pid, $iv_DesiredAccess = 0x1F0FFF, $if_InheritHandle = 1) If Not ProcessExists($iv_Pid) Then SetError(1) Return 0 EndIf Local $ah_Handle[2] = [DllOpen('kernel32.dll')] If @Error Then SetError(2) Return 0 EndIf Local $av_OpenProcess = DllCall($ah_Handle[0], 'int', 'OpenProcess', 'int', $iv_DesiredAccess, 'int', $if_InheritHandle, 'int', $iv_Pid) If @Error Then DllClose($ah_Handle[0]) SetError(3) Return 0 EndIf $ah_Handle[1] = $av_OpenProcess[0] Return $ah_Handle EndFunc ;================================================================================================= ; Function: _MemoryRead($iv_Address, $ah_Handle[, $sv_Type]) ; Description: Reads the value located in the memory address specified. ; Parameter(s): $iv_Address - The memory address you want to read from. It must be in hex ; format (0x00000000). ; $ah_Handle - An array containing the Dll handle and the handle of the open ; process as returned by _MemoryOpen(). ; $sv_Type - (optional) The "Type" of value you intend to read. This is set to ; 'dword'(32bit(4byte) signed integer) by default. See the help file ; for DllStructCreate for all types. ; An example: If you want to read a word that is 15 characters in ; length, you would use 'char[16]'. ; Requirement(s): The $ah_Handle returned from _MemoryOpen. ; Return Value(s): On Success - Returns the value located at the specified address. ; On Failure - Returns 0 ; @Error - 0 = No error. ; 1 = Invalid $ah_Handle. ; 2 = $sv_Type was not a string. ; 3 = $sv_Type is an unknown data type. ; 4 = Failed to allocate the memory needed for the DllStructure. ; 5 = Error allocating memory for $sv_Type. ; 6 = Failed to read from the specified process. ; Author(s): Nomad ; Note(s): Values returned are in Decimal format, unless specified as a 'char' type, then ; they are returned in ASCII format. Also note that size ('char[size]') for all ; 'char' types should be 1 greater than the actual size. ;================================================================================================= Func _MemoryRead($iv_Address, $ah_Handle, $sv_Type = 'dword') If Not IsArray($ah_Handle) Then SetError(1) Return 0 EndIf Local $v_Buffer = DllStructCreate($sv_Type) If @Error Then SetError(@Error + 1) Return 0 EndIf DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '') If Not @Error Then Local $v_Value = DllStructGetData($v_Buffer, 1) Return $v_Value Else SetError(6) Return 0 EndIf EndFunc ;================================================================================================= ; Function: _MemoryWrite($iv_Address, $ah_Handle, $v_Data[, $sv_Type]) ; Description: Writes data to the specified memory address. ; Parameter(s): $iv_Address - The memory address you want to write to. It must be in hex ; format (0x00000000). ; $ah_Handle - An array containing the Dll handle and the handle of the open ; process as returned by _MemoryOpen(). ; $v_Data - The data to be written. ; $sv_Type - (optional) The "Type" of value you intend to write. This is set to ; 'dword'(32bit(4byte) signed integer) by default. See the help file ; for DllStructCreate for all types. ; An example: If you want to write a word that is 15 characters in ; length, you would use 'char[16]'. ; Requirement(s): The $ah_Handle returned from _MemoryOpen. ; Return Value(s): On Success - Returns 1 ; On Failure - Returns 0 ; @Error - 0 = No error. ; 1 = Invalid $ah_Handle. ; 2 = $sv_Type was not a string. ; 3 = $sv_Type is an unknown data type. ; 4 = Failed to allocate the memory needed for the DllStructure. ; 5 = Error allocating memory for $sv_Type. ; 6 = $v_Data is not in the proper format to be used with the "Type" ; selected for $sv_Type, or it is out of range. ; 7 = Failed to write to the specified process. ; Author(s): Nomad ; Note(s): Values sent must be in Decimal format, unless specified as a 'char' type, then ; they must be in ASCII format. Also note that size ('char[size]') for all ; 'char' types should be 1 greater than the actual size. ;================================================================================================= Func _MemoryWrite($iv_Address, $ah_Handle, $v_Data, $sv_Type = 'dword') If Not IsArray($ah_Handle) Then SetError(1) Return 0 EndIf Local $v_Buffer = DllStructCreate($sv_Type) If @Error Then SetError(@Error + 1) Return 0 Else DllStructSetData($v_Buffer, 1, $v_Data) If @Error Then SetError(6) Return 0 EndIf EndIf DllCall($ah_Handle[0], 'int', 'WriteProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '') If Not @Error Then Return 1 Else SetError(7) Return 0 EndIf EndFunc ;================================================================================================= ; Function: _MemoryClose($ah_Handle) ; Description: Closes the process handle opened by using _MemoryOpen(). ; Parameter(s): $ah_Handle - An array containing the Dll handle and the handle of the open ; process as returned by _MemoryOpen(). ; Requirement(s): The $ah_Handle returned from _MemoryOpen. ; Return Value(s): On Success - Returns 1 ; On Failure - Returns 0 ; @Error - 0 = No error. ; 1 = Invalid $ah_Handle. ; 2 = Unable to close the process handle. ; Author(s): Nomad ; Note(s): ;================================================================================================= Func _MemoryClose($ah_Handle) If Not IsArray($ah_Handle) Then SetError(1) Return 0 EndIf DllCall($ah_Handle[0], 'int', 'CloseHandle', 'int', $ah_Handle[1]) If Not @Error Then DllClose($ah_Handle[0]) Return 1 Else DllClose($ah_Handle[0]) SetError(2) Return 0 EndIf EndFunc ;================================================================================================= ; Function: _MemoryPointerRead ($iv_Address, $ah_Handle, $av_Offset[, $sv_Type]) ; Description: Reads a chain of pointers and returns an array containing the destination ; address and the data at the address. ; Parameter(s): $iv_Address - The static memory address you want to start at. It must be in ; hex format (0x00000000). ; $ah_Handle - An array containing the Dll handle and the handle of the open ; process as returned by _MemoryOpen(). ; $av_Offset - An array of offsets for the pointers. Each pointer must have an ; offset. If there is no offset for a pointer, enter 0 for that ; array dimension. ; $sv_Type - (optional) The "Type" of data you intend to read at the destination ; address. This is set to 'dword'(32bit(4byte) signed integer) by ; default. See the help file for DllStructCreate for all types. ; Requirement(s): The $ah_Handle returned from _MemoryOpen. ; Return Value(s): On Success - Returns an array containing the destination address and the value ; located at the address. ; On Failure - Returns 0 ; @Error - 0 = No error. ; 1 = $av_Offset is not an array. ; 2 = Invalid $ah_Handle. ; 3 = $sv_Type is not a string. ; 4 = $sv_Type is an unknown data type. ; 5 = Failed to allocate the memory needed for the DllStructure. ; 6 = Error allocating memory for $sv_Type. ; 7 = Failed to read from the specified process. ; Author(s): Nomad ; Note(s): Values returned are in Decimal format, unless a 'char' type is selected. ; Set $av_Offset like this: ; $av_Offset[0] = NULL (not used) ; $av_Offset[1] = Offset for pointer 1 (all offsets must be in Decimal) ; $av_Offset[2] = Offset for pointer 2 ; etc... ; (The number of array dimensions determines the number of pointers) ;================================================================================================= Func _MemoryPointerRead ($iv_Address, $ah_Handle, $av_Offset, $sv_Type = 'dword') If IsArray($av_Offset) Then If IsArray($ah_Handle) Then Local $iv_PointerCount = UBound($av_Offset) - 1 Else SetError(2) Return 0 EndIf Else SetError(1) Return 0 EndIf Local $iv_Data[2], $i Local $v_Buffer = DllStructCreate('dword') For $i = 0 to $iv_PointerCount If $i = $iv_PointerCount Then $v_Buffer = DllStructCreate($sv_Type) If @Error Then SetError(@Error + 2) Return 0 EndIf $iv_Address = '0x' & hex($iv_Data[1] + $av_Offset[$i]) DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '') If @Error Then SetError(7) Return 0 EndIf $iv_Data[1] = DllStructGetData($v_Buffer, 1) ElseIf $i = 0 Then DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '') If @Error Then SetError(7) Return 0 EndIf $iv_Data[1] = DllStructGetData($v_Buffer, 1) Else $iv_Address = '0x' & hex($iv_Data[1] + $av_Offset[$i]) DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '') If @Error Then SetError(7) Return 0 EndIf $iv_Data[1] = DllStructGetData($v_Buffer, 1) EndIf Next $iv_Data[0] = $iv_Address Return $iv_Data EndFunc ;================================================================================================= ; Function: _MemoryPointerWrite ($iv_Address, $ah_Handle, $av_Offset, $v_Data[, $sv_Type]) ; Description: Reads a chain of pointers and writes the data to the destination address. ; Parameter(s): $iv_Address - The static memory address you want to start at. It must be in ; hex format (0x00000000). ; $ah_Handle - An array containing the Dll handle and the handle of the open ; process as returned by _MemoryOpen(). ; $av_Offset - An array of offsets for the pointers. Each pointer must have an ; offset. If there is no offset for a pointer, enter 0 for that ; array dimension. ; $v_Data - The data to be written. ; $sv_Type - (optional) The "Type" of data you intend to write at the destination ; address. This is set to 'dword'(32bit(4byte) signed integer) by ; default. See the help file for DllStructCreate for all types. ; Requirement(s): The $ah_Handle returned from _MemoryOpen. ; Return Value(s): On Success - Returns the destination address. ; On Failure - Returns 0. ; @Error - 0 = No error. ; 1 = $av_Offset is not an array. ; 2 = Invalid $ah_Handle. ; 3 = Failed to read from the specified process. ; 4 = $sv_Type is not a string. ; 5 = $sv_Type is an unknown data type. ; 6 = Failed to allocate the memory needed for the DllStructure. ; 7 = Error allocating memory for $sv_Type. ; 8 = $v_Data is not in the proper format to be used with the ; "Type" selected for $sv_Type, or it is out of range. ; 9 = Failed to write to the specified process. ; Author(s): Nomad ; Note(s): Data written is in Decimal format, unless a 'char' type is selected. ; Set $av_Offset like this: ; $av_Offset[0] = NULL (not used, doesn't matter what's entered) ; $av_Offset[1] = Offset for pointer 1 (all offsets must be in Decimal) ; $av_Offset[2] = Offset for pointer 2 ; etc... ; (The number of array dimensions determines the number of pointers) ;================================================================================================= Func _MemoryPointerWrite ($iv_Address, $ah_Handle, $av_Offset, $v_Data, $sv_Type = 'dword') If IsArray($av_Offset) Then If IsArray($ah_Handle) Then Local $iv_PointerCount = UBound($av_Offset) - 1 Else SetError(2) Return 0 EndIf Else SetError(1) Return 0 EndIf Local $iv_StructData, $i Local $v_Buffer = DllStructCreate('dword') For $i = 0 to $iv_PointerCount If $i = $iv_PointerCount Then $v_Buffer = DllStructCreate($sv_Type) If @Error Then SetError(@Error + 3) Return 0 EndIf DllStructSetData($v_Buffer, 1, $v_Data) If @Error Then SetError(8) Return 0 EndIf $iv_Address = '0x' & hex($iv_StructData + $av_Offset[$i]) DllCall($ah_Handle[0], 'int', 'WriteProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '') If @Error Then SetError(9) Return 0 Else Return $iv_Address EndIf ElseIf $i = 0 Then DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '') If @Error Then SetError(3) Return 0 EndIf $iv_StructData = DllStructGetData($v_Buffer, 1) Else $iv_Address = '0x' & hex($iv_StructData + $av_Offset[$i]) DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '') If @Error Then SetError(3) Return 0 EndIf $iv_StructData = DllStructGetData($v_Buffer, 1) EndIf Next EndFunc #endregion hope it help ^^ Link to comment Share on other sites More sharing options...
AwAke Posted January 4, 2009 Share Posted January 4, 2009 (edited) Once again thank you for your consistency in helping me but now it just returns blank after using his code as a template. My code atm is; expandcollapse popup#Include <_Memory.au3> Opt("WinTitleMatchMode", 4) Global $ProcessID = WinGetProcess("classname=GxWindowClassD3d","") If $ProcessID = -1 Then MsgBox(4096, "ERROR", "Failed to detect process.") Exit EndIf If Not IsAdmin() Then Msgbox(4096, "Administrative Rights", "You do not have administrative rights.") EndIf $PlayerHP = Read_WoW_Memory() MsgBox(0, "HP", $PlayerHP) Func Read_WoW_Memory() Local $Value Local $DllInformation = _MemoryOpen($ProcessID) If @Error Then MsgBox(4096, "ERROR", "Failed to open memory.") Exit EndIf $Value = _MemoryRead(0x1B3DA850, $DllInformation, 'char[16]') If @Error Then MsgBox(4096, "ERROR", "Failed to read memory.") Exit EndIf _MemoryClose($DllInformation) If @Error Then MsgBox(4096, "ERROR", "Failed to close memory.") Exit EndIf Return $Value EndFunc At this present time without closing my WoW client and I am 100% sure that the memory address '1B3DA850' is correct. ;/ I have no idea what the problem could be besides the value type which is currently set at 'char[16]' besides from that, no idea. Thanks once again mate, I appreciate it. Edited January 4, 2009 by AwAke Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now