logmein Posted January 7, 2009 Share Posted January 7, 2009 (edited) Image Converterversion 1.0I - FeaturesSupport mutiply type : JPG, JPEG, GIF, BMP, PNG, ICO, TIFSimple and easy to useII - Downloadssee Attached filesComments are welcome!ver1.0.exescript.au3 Edited January 7, 2009 by logmein [font=arial, helvetica, sans-serif][s]Total USB Security 3.0 Beta[/s] | [s]Malware Kill[/s] | Malware Scanner | Screen Hider | Locker | Matrix Generator[s]AUTO-SYNC 1.0 | MD5 Hash Generator | URL Checker | Tube Take [/s]| Random Text[/font] Link to comment Share on other sites More sharing options...
thenewkid Posted January 7, 2009 Share Posted January 7, 2009 no matter what i do i get MsgBox (32,"Error","Please fill carefully file's infomation!","",$form) some of my scripts check them out and give feedback so i can learn from them :)autoclicker a autoclickernote taker a script to take notes with Link to comment Share on other sites More sharing options...
gseller Posted January 7, 2009 Share Posted January 7, 2009 no matter what i do i get MsgBox (32,"Error","Please fill carefully file's infomation!","",$form) I get the same error "Please fill carefully file's infomation!" Link to comment Share on other sites More sharing options...
FireFox Posted January 7, 2009 Share Posted January 7, 2009 (edited) @logmeinFor png to any extension :Msgbox(32,"Error","Could not convert file. Please try again!")And it works fine for jpg to bmp Cheers, FireFox. Edited January 7, 2009 by FireFox Link to comment Share on other sites More sharing options...
logmein Posted January 8, 2009 Author Share Posted January 8, 2009 oh, you must filled destination with a folder that contain image file and enter file name in the File name inputbox :-)thanks about these comments! [font=arial, helvetica, sans-serif][s]Total USB Security 3.0 Beta[/s] | [s]Malware Kill[/s] | Malware Scanner | Screen Hider | Locker | Matrix Generator[s]AUTO-SYNC 1.0 | MD5 Hash Generator | URL Checker | Tube Take [/s]| Random Text[/font] Link to comment Share on other sites More sharing options...
HAL9000 Posted January 8, 2009 Share Posted January 8, 2009 i have changed in the script $dir1 = IniRead (@ScriptDir & "\ImageConverter.ini","Settings","Dir1","") $dir2 = IniRead (@scriptdir & "\ImageConverter.ini","Settings","Dir2","") $type = GUICtrlCreateCombo("JPG", 208, 104, 65, 25) GUICtrlSetData(-1, "JPEG|GIF|BMP|PNG|ICO|TIF"); mark Case $pre if GUICtrlRead ($s) <> "" Then ShellExecute(GUICtrlRead ($s),"","","open") Case $e IniWrite (@ScriptDir & "\ImageConverter.ini","Settings","Dir1",guictrlread ($s)) IniWrite (@ScriptDir & "\ImageConverter.ini","Settings","Dir2",guictrlread ($d)) and this works expandcollapse popup#NoTrayIcon #include <GUIConstants.au3> #include <WindowsConstants.au3> #include <ButtonConstants.au3> #include <StaticConstants.au3> #include <GDIplus.au3> ;form start $title = "Image Converter 1.0 - logmein" $dir1 = IniRead (@ScriptDir & "\ImageConverter.ini","Settings","Dir1","") $dir2 = IniRead (@scriptdir & "\ImageConverter.ini","Settings","Dir2","") #Region ### START Koda GUI section ### Form=C:\Documents and Settings\Welcome\Desktop\Image Converter\form.kxf $Form = GUICreate($title, 463, 171, -1, -1) WinSetTrans ($title,"",0) $Group1 = GUICtrlCreateGroup("Options", 8, 0, 449, 137) $Label1 = GUICtrlCreateLabel("Source :", 16, 24, 45, 18) $s = GUICtrlCreateInput("", 80, 24, 257, 22) GUICtrlSetData (-1,$dir1) $sb = GUICtrlCreateButton("...", 344, 24, 51, 25, 0) $pre = GUICtrlCreateButton("Preview", 400, 24, 51, 25, 0) $Label2 = GUICtrlCreateLabel("Destination :", 16, 64, 63, 18) $d = GUICtrlCreateInput("", 80, 64, 257, 22) GUICtrlSetData (-1,$dir2) $db = GUICtrlCreateButton("...", 344, 64, 51, 25, 0) $Label3 = GUICtrlCreateLabel("File name :", 16, 104, 55, 18) $type = GUICtrlCreateCombo("JPG", 208, 104, 65, 25) GUICtrlSetData(-1, "JPEG|GIF|BMP|PNG|ICO|TIF"); mark $n = GUICtrlCreateInput("", 80, 104, 121, 22) $logmein = GUICtrlCreateLabel("Image Converter 1.0 - logmein", 296, 104, 145, 17, $SS_CENTER, BitOR($WS_EX_STATICEDGE,$GUI_WS_EX_PARENTDRAG)) GUICtrlSetFont(-1, 8, 400, 0, "ABC Sans Serif") GUICtrlSetColor(-1, 0xFFFFFF) GUICtrlSetBkColor(-1, 0x000000) GUICtrlSetCursor (-1, 0) GUICtrlCreateGroup("", -99, -99, 1, 1) $ok = GUICtrlCreateButton("Convert !", 8, 144, 115, 25, $BS_DEFPUSHBUTTON) ;$h = GUICtrlCreateButton("Help", 224, 144, 75, 25, 0);disabled $A = GUICtrlCreateButton("About", 304, 144, 75, 25, 0) $e = GUICtrlCreateButton("Exit", 384, 144, 75, 25, 0) GUISetState(@SW_SHOW) ;======================================================== for $i = 0 to 255 step 5 WinSetTrans ($title,"",$i) Sleep (10) Next ;======================================================== #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $sb $z1 = FileOpenDialog ("Browse for image file",GUICtrlRead ($s),"Image (*.jpg;*.gif;*.bmp;*.png;*.ico)",1,"",$form) if Not @error Then GUICtrlSetData ($s,$z1) EndIf Case $db $z2 = FileSelectFolder ("Browse for desination folder","",1+2+4,GUICtrlRead ($d),$form) if Not @error Then GUICtrlSetData ($d,$z2) EndIf Case $pre if GUICtrlRead ($s) <> "" Then ShellExecute(GUICtrlRead ($s),"","","open") Else MsgBox (32,"Message","Please type or select the source file.","",$form) EndIf Case $e IniWrite (@ScriptDir & "\ImageConverter.ini","Settings","Dir1",guictrlread ($s)) IniWrite (@ScriptDir & "\ImageConverter.ini","Settings","Dir2",guictrlread ($d)) for $i = 255 to 1 step -5 WinSetTrans ("Image Converter 1.0 - logmein","",$i) Sleep (10) Next Exit Case $ok convert () Case $a MsgBox (64,"About...","Image Converter" & @Crlf & _ "1.0" & @CRLF & @crlf & _ "Author : logmein" & @CRLF & _ "Email : minhthanh.autoit@gmail.com" & @CRLF & @crlf & _ "Support : JPG, JPEG, GIF, BMP, PNG, ICO, TIF","",$form) EndSwitch WEnd Func convert () if GUICtrlRead ($d) <> "" and GUICtrlRead ($s) <> "" and GUICtrlRead ($n) <> "" and GUICtrlRead ($type) <> ""Then _GDIPlus_Startup () $image = _GDIPlus_ImageLoadFromFile (guictrlread ($s)) $t = _GDIPlus_EncodersGetCLSID (guictrlread ($type)) _GDIPlus_ImageSaveToFileEx ($image,GUICtrlRead ($d) & "\" & GUICtrlRead ($n) & "." & GUICtrlRead ($type),$t) if not @error Then _GDIPlus_Shutdown () WinSetTrans ($title,"",150) MsgBox (64,"Message","Completed convert from :" & @CRLF & GUICtrlRead ($s) & @CRLF & "To :" & GUICtrlRead ($d) & "\" & GUICtrlRead ($n) & "." & GUICtrlRead ($type),4,$form) WinSetTrans ($title,"",255) Else MsgBox (32,"Error","Could not convert file. Please try again!","",$form) _GDIPlus_Shutdown () EndIf Else MsgBox (32,"Error","Please fill carefully file's infomation!","",$form) EndIf EndFunc Link to comment Share on other sites More sharing options...
logmein Posted January 9, 2009 Author Share Posted January 9, 2009 thanks about that, it's better [font=arial, helvetica, sans-serif][s]Total USB Security 3.0 Beta[/s] | [s]Malware Kill[/s] | Malware Scanner | Screen Hider | Locker | Matrix Generator[s]AUTO-SYNC 1.0 | MD5 Hash Generator | URL Checker | Tube Take [/s]| Random Text[/font] Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now