Manjish Posted February 14, 2009 Share Posted February 14, 2009 (edited) Guys I have this GUI's.. 1 is the main with two buttons.. each button launches a new gui.. i don't want anyone to access my main window, whenever i am doing something with my child windows.. so i change the guisetstate to @sw_disable when i launch my child windows.. and enable it again when any of them are closed.. This works fine.. But my problem is when i close the child windows.. the main window gets minimized.. it is enabled.. but it gets minimized for no reason.. I don't know the problem here.. please help me sort this out.. thanks.. expandcollapse popup#include <EditConstants.au3> #include <GUIConstants.au3> #include<AES.au3> $file = "db.ini" #Region ### START Koda GUI section ### Form= $Form1 = GUICreate("Form1", 436, 221, 193, 125) $Group1 = GUICtrlCreateGroup("Make A Choice", 0, 0, 433, 217) $Button1 = GUICtrlCreateButton("Register", 24, 152, 169, 33, 0) $Button2 = GUICtrlCreateButton("Login", 240, 152, 169, 33, 0) $Label1 = GUICtrlCreateLabel("What Do You Wish To Do?", 136, 72, 135, 17) GUICtrlCreateGroup("", -99, -99, 1, 1) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $Button1 GUISetState(@sw_disable) Register() GUISetState(@SW_ENABLE) Case $Button2 GUISetState(@sw_disable) Signin() GUISetState(@sw_enable) EndSwitch WEnd Exit Func Register() #Region ### START Koda GUI section ### Form= $Form1 = GUICreate("Register", 350, 200, 193, 125) $Group1 = GUICtrlCreateGroup("Register", 0, 0, 345, 195) $Label1 = GUICtrlCreateLabel("Enter Registration Information", 40, 30, 143, 17) $input1=GUICtrlCreateInput("", 110, 70, 233, 21) $Label2 = GUICtrlCreateLabel("Username", 48, 70, 60, 17) $Label3 = GUICtrlCreateLabel("Password", 48, 120, 60, 17) $input2=GUICtrlCreateInput("", 110, 120, 233, 21, BitOR($ES_PASSWORD,$ES_AUTOHSCROLL)) $Button3 = GUICtrlCreateButton("OK", 90, 150, 169, 30, 0) GUICtrlCreateGroup("", -99, -99, 1, 1) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $Button3 $check=_CheckUsername($file,GUICtrlRead($input1)) If Not $check Then IniWrite($file, "UserData", GUICtrlRead($input1), _AesEncrypt("Key",GUICtrlRead($input2))) Else MsgBox(0, "", "Username already exists!") EndIf ExitLoop EndSwitch WEnd GUIDelete($Form1) EndFunc Func Signin() #Region ### START Koda GUI section ### Form= $Form1 = GUICreate("Login", 350, 200, 193, 125) $Group1 = GUICtrlCreateGroup("Login", 0, 0, 345, 195) $Label1 = GUICtrlCreateLabel("Enter Registration Information", 40, 30, 143, 17) $input1=GUICtrlCreateInput("", 110, 70, 233, 21) $Label2 = GUICtrlCreateLabel("Username", 48, 70, 60, 17) $Label3 = GUICtrlCreateLabel("Password", 48, 120, 60, 17) $input2=GUICtrlCreateInput("", 110, 120, 233, 21, BitOR($ES_PASSWORD,$ES_AUTOHSCROLL)) $Button4 = GUICtrlCreateButton("OK", 90, 150, 169, 30, 0) GUICtrlCreateGroup("", -99, -99, 1, 1) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $Button4 $check = _CheckUsername($file, GUICtrlRead($input1)) If $check Then $password = IniRead($file, "UserData", GUICtrlRead($input1), "") If Not @error And BinaryToString(_AesDecrypt("Key",$password)) == GUICtrlRead($input2) Then MsgBox(0, "", "Credentials correct!") Exit ElseIf BinaryToString(_AesDecrypt("Key",$password))<>GUICtrlRead($input2) Then MsgBox (0, "", "Incorect Password Entered!") EndIf Else MsgBox(0,"","Incorrect Username Entered") EndIf ExitLoop EndSwitch WEnd GUIDelete($Form1) EndFunc Func _CheckUsername($file, $username) $var = IniReadSection($file, "UserData") If @error Then Return 0 Else For $i = 1 To $var[0][0] If $var[$i][0]=$username Then Return 1 Next Return 0 EndIf EndFunc;==>_CheckUsername ; To encrypt/decrypt memory block or string: $Encrypted = _AesEncrypt("Key", "Plantext") $Decrypted = _AesDecrypt("Key", $Encrypted) $Result = BinaryToString($Decrypted) Edited February 14, 2009 by Manjish [font="Garamond"]Manjish Naik[/font]Engineer, Global Services - QPSHoneywell Automation India LimitedE-mail - Manjish.Naik@honeywell.com Link to comment Share on other sites More sharing options...
FireFox Posted February 14, 2009 Share Posted February 14, 2009 @Manjish Link of AES.au3 ? Cheers, FireFox. Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted February 14, 2009 Moderators Share Posted February 14, 2009 Manjish,Use $GUI_ENABLE/$GUI_DISABLE and it works - but do not ask me why!M23  Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area  Link to comment Share on other sites More sharing options...
Manjish Posted February 14, 2009 Author Share Posted February 14, 2009 Manjish,Use $GUI_ENABLE/$GUI_DISABLE and it works - but do not ask me why!M23Ya but, how do use it.. i can'tuse it in guisetstate.. [font="Garamond"]Manjish Naik[/font]Engineer, Global Services - QPSHoneywell Automation India LimitedE-mail - Manjish.Naik@honeywell.com Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted February 14, 2009 Moderators Share Posted February 14, 2009 Manjish, Yes you can! Just try and see! How do you think I know it works? But as I said, I do not know why! M23  Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area  Link to comment Share on other sites More sharing options...
Manjish Posted February 14, 2009 Author Share Posted February 14, 2009 @ManjishLink of AES.au3 ?Cheers, FireFox.Doesn't matter.. just remove those lines.. i had used it for encryption/decryption.. but my problem is different.. so just forget that part.. [font="Garamond"]Manjish Naik[/font]Engineer, Global Services - QPSHoneywell Automation India LimitedE-mail - Manjish.Naik@honeywell.com Link to comment Share on other sites More sharing options...
FireFox Posted February 14, 2009 Share Posted February 14, 2009 Doesn't matter.. just remove those lines.. i had used it for encryption/decryption.. but my problem is different.. so just forget that part..Melba's solution is working...Cheers, FireFox. Link to comment Share on other sites More sharing options...
Manjish Posted February 14, 2009 Author Share Posted February 14, 2009 @M23 Ah.. your philosophy.. I certainly appreciate it.. Now knowing how it feels to be on the other side.. Anyways, I found a workaround.. I know it's a "WorkAround" and not a solution.. but nevertheless it does the job.. While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $Button1 GUISetState(@sw_disable) Register() GUISetState(@SW_ENABLE) GUISetState(@SW_RESTORE) Case $Button2 GUISetState(@sw_disable) Signin() GUISetState(@sw_enable) GUISetState(@SW_RESTORE) EndSwitch WEnd [font="Garamond"]Manjish Naik[/font]Engineer, Global Services - QPSHoneywell Automation India LimitedE-mail - Manjish.Naik@honeywell.com Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now