myxomatosii Posted March 2, 2009 Share Posted March 2, 2009 (edited) Ok well I'm not sure how to make "proper" transitions between GUI's but this is how I set out to do it by setting While loops to variables and reassigning them to route my script from GUI to GUI but it keeps crashing after the third window.. I'm really not sure why and I thought I would ask to see if it is obvious to anyone. If you want to try this out, continuously push the "Store" and "Back" button. expandcollapse popup;action path for alpha ;;;;;;;;;;gui which takes cityid input from user until i improve the code to find it myself;;;;;;;;;; Global $single,$double Func cityinput() Local $a,$a1,$a2,$a3,$a4,$a5,$ci0,$ci1,$ci2,$ci3,$ci4,$ci5 $single=1 GuiCreate("Ikariam City ID's.", 350, 200) GuiSetState(@sw_show) GuiCtrlCreateLabel("Input City1 ID Here",20,10) GuiCtrlCreateLabel("Input City2 ID Here",20,60) GuiCtrlCreateLabel("Input City3 ID Here",125,10) GUICtrlCreateLabel("Input City4 ID Here",125,60) GuiCtrlCreateLabel("Input City5 ID Here",230,10) GuiCtrlCreateLabel("Input City6 ID Here",230,60) $ci0=GUICtrlCreateInput($a,20,30,100,20) $ci1=GUICtrlCreateInput($a1,20,80,100,20) $ci2=GuiCtrlCreateInput($a2,125,30,100,20) $ci3=GuiCtrlCreateInput($a3,125,80,100,20) $ci4=GuiCtrlCreateInput($a4,230,30) $ci5=GUICtrlCreateInput($a5,230,80) $button1=GuiCtrlCreateButton("Store", 270,165,60,20) GuiCtrlCreateLabel("The city id can be found by right clicking on Show Town",25,110) GuiCtrlCreateLabel("and clicking Properties, city by city.",25,125) While $single=1 Local $msg=GUIGetMsg() Select Case $msg=$button1 GuiSetState(@sw_hide) $single=0 $double=1 EndSelect WEnd EndFunc Func path() ;;;;;;;;;;main control code;;;;;;;;;; ;city1 code #include <GUIConstantsEx.au3> AutoitSetOption("TrayIconHide",1) GUICreate("Hamster Pellet Counter",400,350) GuiSetState(@sw_show) GuiCtrlCreateLabel("Please select the buildings you would like to focus on in each city.",10,10) GUICtrlCreateLabel("City One",260,63) GUICtrlCreateLabel("City Two",260,93) GUICtrlCreateLabel("City Three",260,123) GUICtrlCreateLabel("City Four",260,153) GUICtrlCreateLabel("City Five",260,183) GUICtrlCreateLabel("City Six",260,213) GuiCtrlCreateLabel("--------------------------------------------------"& _ "---------------------------",10,35) $ctl=GuiCtrlCreateCombo("",10,60) GuiCtrlSetData(-1,"Town Hall|Academy|Warehouse|Tavern|Palace/Gov.Res.|Museum|Trading Port|"& _ "Shipyard|Barracks|Town Wall|Embassy|Trading Post|Workshop|Hideout|Forester's House|"& _ "Glassblower|Alchemist's Tower|Winegrower|Stonemason|Carpenter|Optician|"& _ "Firework Test Area|Wine Press|Architect's Office","Town Hall") $ctl1=GuiCtrlCreateCombo("",10,90) GuiCtrlSetData(-1,"Town Hall|Academy|Warehouse|Tavern|Palace/Gov.Res.|Museum|Trading Port|"& _ "Shipyard|Barracks|Town Wall|Embassy|Trading Post|Workshop|Hideout|Forester's House|"& _ "Glassblower|Alchemist's Tower|Winegrower|Stonemason|Carpenter|Optician|"& _ "Firework Test Area|Wine Press|Architect's Office","Town Hall") $ctl2=GuiCtrlCreateCombo("",10,120) GuiCtrlSetData(-1,"Town Hall|Academy|Warehouse|Tavern|Palace/Gov.Res.|Museum|Trading Port|"& _ "Shipyard|Barracks|Town Wall|Embassy|Trading Post|Workshop|Hideout|Forester's House|"& _ "Glassblower|Alchemist's Tower|Winegrower|Stonemason|Carpenter|Optician|"& _ "Firework Test Area|Wine Press|Architect's Office","Town Hall") $ctl3=GuiCtrlCreateCombo("",10,150) GuiCtrlSetData(-1,"Town Hall|Academy|Warehouse|Tavern|Palace/Gov.Res.|Museum|Trading Port|"& _ "Shipyard|Barracks|Town Wall|Embassy|Trading Post|Workshop|Hideout|Forester's House|"& _ "Glassblower|Alchemist's Tower|Winegrower|Stonemason|Carpenter|Optician|"& _ "Firework Test Area|Wine Press|Architect's Office","Town Hall") $ctl4=GuiCtrlCreateCombo("",10,180) GuiCtrlSetData(-1,"Town Hall|Academy|Warehouse|Tavern|Palace/Gov.Res.|Museum|Trading Port|"& _ "Shipyard|Barracks|Town Wall|Embassy|Trading Post|Workshop|Hideout|Forester's House|"& _ "Glassblower|Alchemist's Tower|Winegrower|Stonemason|Carpenter|Optician|"& _ "Firework Test Area|Wine Press|Architect's Office","Town Hall") $ctl5=GuiCtrlCreateCombo("",10,210) GuiCtrlSetData(-1,"Town Hall|Academy|Warehouse|Tavern|Palace/Gov.Res.|Museum|Trading Port|"& _ "Shipyard|Barracks|Town Wall|Embassy|Trading Post|Workshop|Hideout|Forester's House|"& _ "Glassblower|Alchemist's Tower|Winegrower|Stonemason|Carpenter|Optician|"& _ "Firework Test Area|Wine Press|Architect's Office","Town Hall") ;launch,id,reserved buttons $ebtn=GuiCtrlCreateButton("RESERVE",300,300,75,25) $Lbtn=GUICtrlCreateButton("Launch",200,300,75,25) $twnbtn=GUICtrlCreateButton("Set Town IDs",100,300,75,25) $bbtn=GuiCtrlCreateButton("Back",10,300,75,25) ;creates and sets slider values $sld=GuiCtrlCreateSlider(10,260,200) GuiCtrlSetLimit(-1,90,15) GuiCtrlSetData($sld,55) ;labels GuiCtrlCreateLabel("Minute Delay",210,255) GuiCtrlCreateLabel("90",190,240) GuiCtrlCreateLabel("75",154,240) GuiCtrlCreateLabel("55",108,240) GuiCtrlCreateLabel("35",62,240) GuiCtrlCreateLabel("15",16,240) While $double=1 Local $msg=GuiGetMsg() Select Case $ctl=$msg MsgBox(0,"First","Set to "& GuiCtrlRead($ctl)&".",.5) Case $ctl1=$msg MsgBox(0,"Second","Set to "& GuiCtrlRead($ctl1)&".",.5) Case $ctl2=$msg MsgBox(0,"Third","Set to "& GuiCtrlRead($ctl2)&".",.5) Case $ctl3=$msg MsgBox(0,"Fourth","Set to "& GuiCtrlRead($ctl3)&".",.5) Case $ctl4=$msg MsgBox(0,"Fifth","Set to "& GuiCtrlRead($ctl4)&".",.5) Case $ctl5=$msg MsgBox(0,"Sixth","Set to "& GuiCtrlRead($ctl5)&".",.5) Case $Lbtn=$msg MsgBox(0,"Launching","Launching main sequence with a "&GuiCtrlRead($sld)&" minute delay.",2) Case $bbtn=$msg GuiSetState(@sw_hide) $double=0 $single=1 EndSelect Wend EndFunc while 1 cityinput() path() WEnd Edited March 2, 2009 by myxomatosii Link to comment Share on other sites More sharing options...
dantay9 Posted March 2, 2009 Share Posted March 2, 2009 (edited) All you have to do is move your #Inlcude file on line 40 to the top. What was happening was you were declaring the same constants over and over again because of the loop. Just move the indclude to the top of the script and you should be fine. Edited March 2, 2009 by dantay9 Link to comment Share on other sites More sharing options...
myxomatosii Posted March 2, 2009 Author Share Posted March 2, 2009 All you have to do is move your #Inlcude file on line 40 to the top. What was happening was you were declaring the same constants over and over again because of the loop. Just move the indclude to the top of the script and you should be fine.Okay, that makes sense. I was writing the two parts separately and added them together later. Didn't notice the include Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now