Kerberuz 0 Posted March 1, 2005 (edited) I have only been using AutoIt for about a week(03.01.2005). I created templates for some of my testing needs. I'm sure it will evolve to more, but after I had made my templates I started to mass create scripts. I found it cumbersome to reopen all the scripts after modification to build them into an executable. So I created a simple program to do it for me using AutoIt. It's nothing to shout about, but feel free to use it if it suits your needs. Batch_Compile.au3 Edited March 1, 2005 by Kerberuz Kerby Share this post Link to post Share on other sites
DirtyBanditos 0 Posted March 1, 2005 (edited) I have only been using AutoIt for about a week(03.01.2005). I created templates for some of my testing needs. I'm sure it will evolve to more, but after I had made my templates I started to mass create scripts, I found it combersome to reopen all the scripts after modification to build them into an executable. So I created a simple program to do it for me using AutoIt. It's nothing to shout about, but feel free to use it if it suits your needs.Batch_Compile.au3<{POST_SNAPBACK}>Hi great job looks good but, look this exampel pls it is a Batch Creator, Simplify Running Complex TasksBy Chaos945 it is very nice Thx to Chaos945 expandcollapse popupOpt("RunErrorsFatal", 0) Opt("WinTitleMatchMode", 3) If WinExists("%_BatchCreator_%") Then Exit AutoItWinSetTitle("%_BatchCreator_%") HotKeySet( "{ESC}", "nothing" );unbinds the default ESC to quit hotkey GuiCreate("Batch Creator", 500, 341,(@DesktopWidth-500)/2, (@DesktopHeight-341)/2 , 0x04CF0000) #include "GUIConstants.au3" DIM $status $file_menu = GUICtrlCreateMenu ("&File") $addf_item = GUICtrlCreateMenuitem ("Add File",$file_menu) $addp_item = GUICtrlCreateMenuitem ("Add Path",$file_menu) $spce_item = GUICtrlCreateMenuitem ("",$file_menu) $saveb_item = GUICtrlCreateMenuitem ("Save Batch.. (CTRL+S)",$file_menu) $spce_item = GUICtrlCreateMenuitem ("",$file_menu) $exit_item = GUICtrlCreateMenuitem ("Exit (CTRL+Q)",$file_menu) $insert_menu = GUICtrlCreateMenu ("&Insert", -1) $insert_cmd = GUICtrlCreateMenuitem ("DOS command", $insert_menu) $clear_menu = GUICtrlCreateMenuitem ("&Clear All", -1) $about_menu = GUICtrlCreateMenuitem ("&About", -1) $edit_lst = GuiCtrlCreateEdit("", 5, 5, 360, 250);[left, top ,width ,height] $lbl_bch = GuiCtrlCreateLabel("Batch Jobs:", 375, 5, 290, 20) $list_lst = GuiCtrlCreateList( "", 375, 20, 120, 210) $lload_bch = GuiCtrlCreateButton("Load", 375, 210, 60, 20) $delete_bch = GuiCtrlCreateButton("Delete", 435, 210, 60, 20) $launch_pr = GuiCtrlCreateButton("Launch", 5, 265, 360, 30) ;$terminate_pr = GuiCtrlCreateButton("Terminate Batch", 5, 265, 360, 30) ;GUICtrlSetState($terminate_pr, $GUI_HIDE) $statuslabel = GuiCtrlCreateLabel("Idle", 0, 300, 500, 20,BitOr($SS_SIMPLE,$SS_SUNKEN)) GUICtrlSetTip ($edit_lst, "Input batch commands here") GUICtrlSetTip ($list_lst, "Predefined batch files") GUICtrlSetTip ($lload_bch, "Loads selected batch file") GUICtrlSetTip ($delete_bch, "Deletes selected batch file") $fst_dta = FileFindFirstFile("*.bch");creates .bch files in the Batch List If $fst_dta <> -1 Then $apnd_dta = FileFindNextFile( $fst_dta ) Do $apnd_dta = $apnd_dta & "|" & FileFindNextFile( $fst_dta ) Until @error GUICtrlSetData ($list_lst, $apnd_dta ) EndIf GuiSetState() While 1 If WinActive("Batch Creator") Then;prevets stealing hotkeys when the window is not active HotKeySet( "^q", "gotoExit" ) HotKeySet( "^s", "SaveFun" ) Else HotKeySet( "^q" ) HotKeySet( "^s" ) EndIf $msg = GuiGetMsg() Select Case $msg = -3 GUIDelete() ExitLoop Case $msg = $launch_pr;Launch button pressed RunList() Case $msg = $addf_item;add file to edit list $append = GuiCtrlRead($edit_lst); $data_apnd = FileOpenDialog( "Select a file to add..", "", "All (*.*)", 1) If $data_apnd = 1 Then $data_apnd = "" $append = $append & $data_apnd GUICtrlSetData ($edit_lst, $append); Case $msg = $addp_item;add path to edit list $append = GuiCtrlRead($edit_lst); $append = $append & FileSelectFolder ( "Select a path to add..", 1); GUICtrlSetData ($edit_lst, $append); Case $msg = $saveb_item;save edit list as bch SaveFun() Case $msg = $insert_cmd;inserts @cmd $append = GuiCtrlRead($edit_lst); $append = $append & "@cmd"; GUICtrlSetData ($edit_lst, $append) Case $msg = $clear_menu;clear edit list $append = GuiCtrlRead($edit_lst); GUICtrlSetData ($edit_lst, ""); Case $msg = $about_menu;show about MsgBox(0, "About", "Batch Creator" & @CRLF & "Version 0.1 build 9" & @CRLF & @CRLF & "By chaos945@msn.com" & @CRLF & "Created with AutoIt3") Case $msg = $lload_bch;load batch file If GuiCtrlRead($list_lst) = "" Then MsgBox(0, "Error", "No Batch Job selected") Else $bchld_rd = FileRead(GuiCtrlRead($list_lst), 9999) GUICtrlSetData($edit_lst, $bchld_rd) EndIf Case $msg = $delete_bch;delete batch file If GuiCtrlRead($list_lst) = "" Then MsgBox(0, "Error", "No Batch Job selected") Else $confirm = MsgBox(32+4+262144, "", "Confirm delete batch?") If $confirm = 6 Then FileDelete(GuiCtrlRead($list_lst)) lst_rfsh() EndIF EndIf Case $msg = $exit_item;exit program gotoExit() Case Else ;;; EndSelect WEnd Exit Func RunList() $launchstuff = GuiCtrlRead($edit_lst); $items = stringsplit( $launchstuff, @LF); For $i = 1 to $items[0] Step 1 GUICtrlSetState($launch_pr, $GUI_DISABLE) ;GUICtrlSetState($terminate_pr, $GUI_SHOW) ;Msgbox(0, "Debug - Launching", $items[$i] ); GLOBAL $progrun = StringStripCR($items[$i]) ;MsgBox(0,"Debug - Line " & $i,GUIGetMsg()) ;If GUIGetMsg() = $terminate_pr Then ; CkStr() ; ProcessClose($progrun) ; ExitLoop ;EndIf If $progrun <> "" Then If StringInStr( $progrun, "@cmd ") Then $progrun = StringTrimLeft($progrun, 4) GUICtrlDelete($statuslabel) $statuslabel = GuiCtrlCreateLabel("Current Process: " & $progrun, 0, 300, 500, 20,BitOr($SS_SIMPLE,$SS_SUNKEN)) ;Msgbox(0, "Debug - DOS commands", "@ComSpec" & " /c " & $progrun) RunWait(@ComSpec & " /c " & $progrun) $progrun = "cmd.exe" Else GUICtrlDelete($statuslabel) $statuslabel = GuiCtrlCreateLabel("Current Process: " & $progrun, 0, 300, 500, 20,BitOr($SS_SIMPLE,$SS_SUNKEN)) RunWait($progrun) EndIf ;If Not StringInStr($progrun, ".") Then ; If Not StringInStr($progrun, " ") Then ; $progrun = $progrun & ".exe" ; EndIf ;ElseIf StringInStr($progrun, "ProcessIdleTasks") Then ; Processwait("wmiadap.exe") ; $progrun = "wmiadap.exe" ;ElseIf $progrun = "cmd.exe" Then ; ;;;; ;ElseIf StringInStr( $progrun, ".exe") Then ; $progrun = StringSplit( $progrun, ".exe") ; $progrun = $progrun & ".exe" ;EndIf ;ProcessWaitClose( $progrun ) EndIf Next ;GUICtrlSetState($terminate_pr, $GUI_HIDE) GUICtrlDelete($statuslabel) $statuslabel = GuiCtrlCreateLabel("Idle", 0, 300, 500, 20,BitOr($SS_SIMPLE,$SS_SUNKEN)) GUICtrlSetState($launch_pr, $GUI_ENABLE) EndFunc ;Func CkStr() ; If Not StringInStr($progrun, ".") Then ; If Not StringInStr($progrun, " ") Then ; $progrun = $progrun & ".exe" ; EndIf ; ElseIf StringInStr($progrun, "ProcessIdleTasks") Then ; Processwait("wmiadap.exe") ; $progrun = "wmiadap.exe" ; ElseIf $progrun = "cmd.exe" Then ; ;;;; ; ElseIf StringInStr( $progrun, ".exe") Then ; $progrun = StringSplit( $progrun, ".exe") ; $progrun = $progrun & ".exe" ; EndIf ;EndFunc Func lst_rfsh() GUICtrlDelete($list_lst) $list_lst = GuiCtrlCreateList( "", 375, 20, 120, 210) $fst_dta = FileFindFirstFile("*.bch") If $fst_dta <> -1 Then $apnd_dta = FileFindNextFile( $fst_dta ) Do $apnd_dta = $apnd_dta & "|" & FileFindNextFile( $fst_dta ) Until @error GUICtrlSetData ($list_lst, $apnd_dta ) EndIf EndFunc Func nothing() EndFunc Func SaveFun() If NOT WinActive( "Batch Creator" ) Then Return $save_pth = FileSaveDialog( "Save batch as..", @ScriptDir, "Batch File (*.bch)", 16, "new.bch" ) If NOT @error Then If StringInStr($save_pth, ".bch", 1) = 0 Then $save_pth = $save_pth & ".bch" FileDelete($save_pth) FileWrite( $save_pth, GuiCtrlRead($edit_lst)) lst_rfsh() EndIf EndFunc Func gotoExit() If NOT WinActive( "Batch Creator" ) Then Return Else GUIDelete() Exit EndIf EndFunc Edited March 1, 2005 by DirtyBanditos Share this post Link to post Share on other sites
Kerberuz 0 Posted March 1, 2005 Hi great job looks good but, look this exampel pls it is a Batch Creator, Simplify Running Complex TasksBy Chaos945 it is very nice Thx to Chaos945 There are a some good ideas in that script, currently I have no need for anything more than just compiling all my scripts to exe from one directory. I'd imagine in the future I could also add a que for compiling scripts from multiple directories or single files. It wouldn't take much to add that functionality.FYI: When adding files or directories I noticed there were no line break so all items stayed on the same line. Kerby Share this post Link to post Share on other sites
DirtyBanditos 0 Posted March 1, 2005 (edited) There are a some good ideas in that script, currently I have no need for anything more than just compiling all my scripts to exe from one directory. I'd imagine in the future I could also add a que for compiling scripts from multiple directories or single files. It wouldn't take much to add that functionality.FYI: When adding files or directories I noticed there were no line break so all items stayed on the same line.<{POST_SNAPBACK}>Hello Kerberuz i think you have right look wat you need and adde it on your todo list on the futures^^ Your script is great dudu i have gif you a idea to adde any great futures to it:) happy coding Edited March 1, 2005 by DirtyBanditos Share this post Link to post Share on other sites
