john123 Posted March 10, 2009 Share Posted March 10, 2009 Please help me a problem as below: In Tab1, I want Apply button grey-out when Year combo box empty, and when I chose a year in year combo box,.it enable , press it to write a year to data.ini file. After that, I want Apply button grey-out. Then I type a name in Name input (or new chose a year in combo box - Name input or year combo box get focus), I want Apply button enable. And same for Tabl2. I tried GuiCtrlSetState and ConsoleCommand but without success . Thank you very much. Here my code : expandcollapse popup#include <ButtonConstants.au3> #include <ComboConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <TabConstants.au3> #include <WindowsConstants.au3> #Region ### START Koda GUI section ### Form= $Form2 = GUICreate("Form1", 413, 298, 300, 220) $Tab1 = GUICtrlCreateTab(64, 32, 289, 193) GUICtrlSetResizing(-1, $GUI_DOCKWIDTH+$GUI_DOCKHEIGHT) $TabSheet1 = GUICtrlCreateTabItem("Tab1") $Name = GUICtrlCreateInput("", 168, 96, 113, 21) $Year = GUICtrlCreateCombo("", 96, 96, 57, 25) GUICtrlSetData(-1,"2006|2007|2008|2009","") $Lable1 = GUICtrlCreateLabel("Year", 104, 72, 26, 17) $Label2 = GUICtrlCreateLabel("Name", 200, 72, 32, 17) $TabSheet2 = GUICtrlCreateTabItem("Tab2") $Height = GUICtrlCreateInput("", 120, 96, 113, 21) $Label3 = GUICtrlCreateLabel("Hieght", 88, 72, 35, 17) $Label4 = GUICtrlCreateLabel("Weight", 88, 128, 38, 17) $Weight = GUICtrlCreateInput("", 120, 152, 121, 21) GUICtrlCreateTabItem("") $OK = GUICtrlCreateButton("OK", 200, 232, 59, 25, 0) $Apply = GUICtrlCreateButton("Apply", 272, 232, 51, 25, 0) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Apply Switch GUICtrlRead($Tab1) Case 0 IniWrite(@ScriptDir & '\data.ini',"INFO","Year",GUICtrlRead($Year)) IniWrite(@ScriptDir & '\data.ini',"INFO","Name",GUICtrlRead($Name)) Case 1 IniWrite(@ScriptDir & '\data.ini',"INFO","Height",GUICtrlRead($Height)) IniWrite(@ScriptDir & '\data.ini',"INFO","Weight",GUICtrlRead($Weight)) EndSwitch Case $OK Switch GUICtrlRead($Tab1) Case 0 IniWrite(@ScriptDir & '\data.ini',"INFO","Year",GUICtrlRead($Year)) IniWrite(@ScriptDir & '\data.ini',"INFO","Name",GUICtrlRead($Name)) exit Case 1 IniWrite(@ScriptDir & '\data.ini',"INFO","Height",GUICtrlRead($Height)) IniWrite(@ScriptDir & '\data.ini',"INFO","Weight",GUICtrlRead($Weight)) exit EndSwitch EndSwitch WEnd Link to comment Share on other sites More sharing options...
cheese Posted March 10, 2009 Share Posted March 10, 2009 no good , but it works! expandcollapse popup#include <ButtonConstants.au3> #include <ComboConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <TabConstants.au3> #include <WindowsConstants.au3> #Region ### START Koda GUI section ### Form= $Form2 = GUICreate("Form1", 413, 298, 300, 220) $Tab1 = GUICtrlCreateTab(64, 32, 289, 193) GUICtrlSetResizing(-1, $GUI_DOCKWIDTH+$GUI_DOCKHEIGHT) $TabSheet1 = GUICtrlCreateTabItem("Tab1") $Name = GUICtrlCreateInput("", 168, 96, 113, 21) $Year = GUICtrlCreateCombo("", 96, 96, 57, 25) GUICtrlSetData(-1,"2006|2007|2008|2009","") $Lable1 = GUICtrlCreateLabel("Year", 104, 72, 26, 17) $Label2 = GUICtrlCreateLabel("Name", 200, 72, 32, 17) $TabSheet2 = GUICtrlCreateTabItem("Tab2") $Height = GUICtrlCreateInput("", 120, 96, 113, 21) $Label3 = GUICtrlCreateLabel("Hieght", 88, 72, 35, 17) $Label4 = GUICtrlCreateLabel("Weight", 88, 128, 38, 17) $Weight = GUICtrlCreateInput("", 120, 152, 121, 21) GUICtrlCreateTabItem("") $OK = GUICtrlCreateButton("OK", 200, 232, 59, 25, 0) $Apply = GUICtrlCreateButton("Apply", 272, 232, 51, 25, 0) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### ;1=-> GUICtrlSetState($Apply,$GUI_DISABLE) $valueYear = GUICtrlRead($Year) $valueName = GUICtrlRead($Name) $valueHeight = GUICtrlRead($Height) $valueWeight = GUICtrlRead($Weight) ;<-=1 While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Apply Switch GUICtrlRead($Tab1) Case 0 IniWrite(@ScriptDir & '\data.ini',"INFO","Year",GUICtrlRead($Year)) IniWrite(@ScriptDir & '\data.ini',"INFO","Name",GUICtrlRead($Name)) Case 1 IniWrite(@ScriptDir & '\data.ini',"INFO","Height",GUICtrlRead($Height)) IniWrite(@ScriptDir & '\data.ini',"INFO","Weight",GUICtrlRead($Weight)) EndSwitch ;2=-> GUICtrlSetState($Apply,$GUI_DISABLE) $valueYear = GUICtrlRead($Year) $valueName = GUICtrlRead($Name) $valueHeight = GUICtrlRead($Height) $valueWeight = GUICtrlRead($Weight) ;<-=2 Case $OK Switch GUICtrlRead($Tab1) Case 0 IniWrite(@ScriptDir & '\data.ini',"INFO","Year",GUICtrlRead($Year)) IniWrite(@ScriptDir & '\data.ini',"INFO","Name",GUICtrlRead($Name)) exit Case 1 IniWrite(@ScriptDir & '\data.ini',"INFO","Height",GUICtrlRead($Height)) IniWrite(@ScriptDir & '\data.ini',"INFO","Weight",GUICtrlRead($Weight)) exit EndSwitch EndSwitch ;3=-> If ((GUICtrlRead($Year) <> $valueYear) Or (GUICtrlRead($Name) <> $valueName) Or _ (GUICtrlRead($Height) <> $valueHeight) Or (GUICtrlRead($Weight) <> $valueWeight)) And _ (GUICtrlGetState($Apply) = 128 + 16) Then; 128 + 16 = $GUI_ENABLE + ?? GUICtrlSetState($Apply,$GUI_ENABLE) EndIf ;<-=3 WEnd Link to comment Share on other sites More sharing options...
john123 Posted March 10, 2009 Author Share Posted March 10, 2009 (edited) Thanks Cheese . Can you fix below problem? When I click into dropdown list and drag mouse on list of combo but I don't chose any year and click outside combo box (that mean have no year in combo box - view picture), status of "Apply" button is Enable. Can you make it Disable?Thank you. Edited March 10, 2009 by john123 Link to comment Share on other sites More sharing options...
Zedna Posted March 10, 2009 Share Posted March 10, 2009 expandcollapse popup#include <ButtonConstants.au3>#include <ComboConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <TabConstants.au3> #include <WindowsConstants.au3> #Region ### START Koda GUI section ### Form= $Form2 = GUICreate("Form1", 413, 298, 300, 220) $Tab1 = GUICtrlCreateTab(64, 32, 289, 193) GUICtrlSetResizing(-1, $GUI_DOCKWIDTH+$GUI_DOCKHEIGHT) $TabSheet1 = GUICtrlCreateTabItem("Tab1") $Name = GUICtrlCreateInput("", 168, 96, 113, 21) $Year = GUICtrlCreateCombo("", 96, 96, 57, 25) GUICtrlSetData(-1,"2006|2007|2008|2009","") $Lable1 = GUICtrlCreateLabel("Year", 104, 72, 26, 17) $Label2 = GUICtrlCreateLabel("Name", 200, 72, 32, 17) $TabSheet2 = GUICtrlCreateTabItem("Tab2") $Height = GUICtrlCreateInput("", 120, 96, 113, 21) $Label3 = GUICtrlCreateLabel("Hieght", 88, 72, 35, 17) $Label4 = GUICtrlCreateLabel("Weight", 88, 128, 38, 17) $Weight = GUICtrlCreateInput("", 120, 152, 121, 21) GUICtrlCreateTabItem("") $OK = GUICtrlCreateButton("OK", 200, 232, 59, 25, 0) $Apply = GUICtrlCreateButton("Apply", 272, 232, 51, 25, 0) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### ;1=-> GUICtrlSetState($Apply,$GUI_DISABLE) $valueYear = GUICtrlRead($Year) $valueName = GUICtrlRead($Name) $valueHeight = GUICtrlRead($Height) $valueWeight = GUICtrlRead($Weight) ;<-=1 While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Apply Switch GUICtrlRead($Tab1) Case 0 IniWrite(@ScriptDir & '\data.ini',"INFO","Year",GUICtrlRead($Year)) IniWrite(@ScriptDir & '\data.ini',"INFO","Name",GUICtrlRead($Name)) Case 1 IniWrite(@ScriptDir & '\data.ini',"INFO","Height",GUICtrlRead($Height)) IniWrite(@ScriptDir & '\data.ini',"INFO","Weight",GUICtrlRead($Weight)) EndSwitch ;2=-> GUICtrlSetState($Apply,$GUI_DISABLE) $valueYear = GUICtrlRead($Year) $valueName = GUICtrlRead($Name) $valueHeight = GUICtrlRead($Height) $valueWeight = GUICtrlRead($Weight) ;<-=2 Case $OK Switch GUICtrlRead($Tab1) Case 0 IniWrite(@ScriptDir & '\data.ini',"INFO","Year",GUICtrlRead($Year)) IniWrite(@ScriptDir & '\data.ini',"INFO","Name",GUICtrlRead($Name)) exit Case 1 IniWrite(@ScriptDir & '\data.ini',"INFO","Height",GUICtrlRead($Height)) IniWrite(@ScriptDir & '\data.ini',"INFO","Weight",GUICtrlRead($Weight)) exit EndSwitch Case $Year,$Name,$Height,$Weight If GUICtrlRead($Year) <> '' And GUICtrlRead($Name) <> '' And _ GUICtrlRead($Height) <> '' And GUICtrlRead($Weight) <> '' Then GUICtrlSetState($Apply,$GUI_ENABLE) Else GUICtrlSetState($Apply,$GUI_DISABLE) EndIf EndSwitch WEnd Resources UDF Â ResourcesEx UDF Â AutoIt Forum Search Link to comment Share on other sites More sharing options...
GEOSoft Posted March 10, 2009 Share Posted March 10, 2009 Quick tip to avoid flicker Case $Year,$Name,$Height,$Weight If GUICtrlRead($Year) <> '' And GUICtrlRead($Name) <> '' And _ GUICtrlRead($Height) <> '' And GUICtrlRead($Weight) <> '' Then If GUICtrlGetState($Apply) > $GUI_ENABLE Then GUICtrlSetState($Apply,$GUI_ENABLE) Else If GUICtrlGetState($Apply) < $GUI_DISABLE Then GUICtrlSetState($Apply,$GUI_DISABLE) EndIf George Question about decompiling code? Read the decompiling FAQ and don't bother posting the question in the forums.Be sure to read and follow the forum rules. -AKA the AutoIt Reading and Comprehension Skills test.*** The PCRE (Regular Expression) ToolKit for AutoIT - (Updated Oct 20, 2011 ver:3.0.1.13) - Please update your current version before filing any bug reports. The installer now includes both 32 and 64 bit versions. No change in version number. Visit my Blog .. currently not active but it will soon be resplendent with news and views. Also please remove any links you may have to my website. it is soon to be closed and replaced with something else. "Old age and treachery will always overcome youth and skill!" Link to comment Share on other sites More sharing options...
cheese Posted March 11, 2009 Share Posted March 11, 2009 so, compare scripts john123, Zedna, GEOSoft and little mad from me expandcollapse popup#include <ButtonConstants.au3> #include <ComboConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <TabConstants.au3> #include <WindowsConstants.au3> #Region ### START Koda GUI section ### Form= $Form2 = GUICreate("Form1",413,298,300,220) $Tab1 = GUICtrlCreateTab(64,32,289,193) GUICtrlSetResizing(-1,$GUI_DOCKWIDTH + $GUI_DOCKHEIGHT) $TabSheet1 = GUICtrlCreateTabItem("Tab1") $Label5 = GUICtrlCreateLabel("",66,55,283,41) ;GUICtrlSetBkColor(-1,0x00c0c0) $Label6 = GUICtrlCreateLabel("",66,96,50,21) ;GUICtrlSetBkColor(-1,0xc0c000) $Label7 = GUICtrlCreateLabel("",153,96,15,21) ;GUICtrlSetBkColor(-1,0xc0c000) $Label8 = GUICtrlCreateLabel("",281,96,68,21) ;GUICtrlSetBkColor(-1,0xc0c000) $Label9 = GUICtrlCreateLabel("",66,117,283,104) ;GUICtrlSetBkColor(-1,0x00c0c0) $Name = GUICtrlCreateInput("",168,96,113,21) $Year = GUICtrlCreateCombo("",96,96,57,25) GUICtrlSetData(-1,"2006|2007|2008|2009","") $Lable1 = GUICtrlCreateLabel("Year",104,72,26,17) $Label2 = GUICtrlCreateLabel("Name",200,72,32,17) $TabSheet2 = GUICtrlCreateTabItem("Tab2") $Label10 = GUICtrlCreateLabel("",66,55,54,166) ;GUICtrlSetBkColor(-1,0x00c0c0) $Label11 = GUICtrlCreateLabel("",120,55,121,41) ;GUICtrlSetBkColor(-1,0xc0c000) $Label12 = GUICtrlCreateLabel("",120,117,121,35) ;GUICtrlSetBkColor(-1,0xc0c000) $Label13 = GUICtrlCreateLabel("",120,173,121,48) ;GUICtrlSetBkColor(-1,0xc0c000) $Label14 = GUICtrlCreateLabel("",241,55,108,166) ;GUICtrlSetBkColor(-1,0x00c0c0) $Height = GUICtrlCreateInput("",120,96,121,21) $Label3 = GUICtrlCreateLabel("Hieght",88,72,35,17) $Label4 = GUICtrlCreateLabel("Weight",88,128,38,17) $Weight = GUICtrlCreateInput("",120,152,121,21) GUICtrlCreateTabItem("") $OK = GUICtrlCreateButton("OK",200,232,59,25,0) $Apply = GUICtrlCreateButton("Apply",272,232,51,25,0) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### GUICtrlSetState($Apply,$GUI_DISABLE) $valueYear = GUICtrlRead($Year) $valueName = GUICtrlRead($Name) $valueHeight = GUICtrlRead($Height) $valueWeight = GUICtrlRead($Weight) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Apply Switch GUICtrlRead($Tab1) Case 0 IniWrite(@ScriptDir & '\data.ini',"INFO","Year",GUICtrlRead($Year)) IniWrite(@ScriptDir & '\data.ini',"INFO","Name",GUICtrlRead($Name)) Case 1 IniWrite(@ScriptDir & '\data.ini',"INFO","Height",GUICtrlRead($Height)) IniWrite(@ScriptDir & '\data.ini',"INFO","Weight",GUICtrlRead($Weight)) EndSwitch $valueYear = GUICtrlRead($Year) $valueName = GUICtrlRead($Name) $valueHeight = GUICtrlRead($Height) $valueWeight = GUICtrlRead($Weight) GUICtrlSetState($Apply,$GUI_DISABLE) Case $OK Switch GUICtrlRead($Tab1) Case 0 IniWrite(@ScriptDir & '\data.ini',"INFO","Year",GUICtrlRead($Year)) IniWrite(@ScriptDir & '\data.ini',"INFO","Name",GUICtrlRead($Name)) Exit Case 1 IniWrite(@ScriptDir & '\data.ini',"INFO","Height",GUICtrlRead($Height)) IniWrite(@ScriptDir & '\data.ini',"INFO","Weight",GUICtrlRead($Weight)) Exit EndSwitch Case $Year If GUICtrlRead($Year) <> $valueYear Then If GUICtrlGetState($Apply) > $GUI_ENABLE Then GUICtrlSetState($Apply,$GUI_ENABLE) Else If GUICtrlGetState($Apply) < $GUI_DISABLE Then GUICtrlSetState($Apply,$GUI_DISABLE) EndIf Case $Label5,$Label6,$Label7,$Label8,$Label9,$Label10,$Label11,$Label12,$Label13,$Label14;,$TabSheet1,$TabSheet2 $valueYear = GUICtrlRead($Year) $valueName = GUICtrlRead($Name) $valueHeight = GUICtrlRead($Height) $valueWeight = GUICtrlRead($Weight) GUICtrlSetState($Apply,$GUI_DISABLE) EndSwitch If ((GUICtrlRead($Name) <> $valueName) Or (GUICtrlRead($Height) <> $valueHeight) Or (GUICtrlRead($Weight) <> $valueWeight)) _ And GUICtrlGetState($Apply) > $GUI_DISABLE Then GUICtrlSetState($Apply,$GUI_ENABLE) EndIf WEnd Link to comment Share on other sites More sharing options...
john123 Posted March 11, 2009 Author Share Posted March 11, 2009 Thanks very much. Cheese, Zedna, GEOSoft . . . I improve your code and it work fine. Thanks again. Have a nice day. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now