Jump to content

[Contribution] YATAT

cembry90
 Share

Recommended Posts

cembry90 Wayfarer

cembry90

Posted
Posted (edited)

Hey. I can't post this in the correct forum so hopefully I wont get the banz0r for posting here. This is a contribution for teamspeak admins to use on their servers. Enjoy!

YATAT.rar, 297 KB

NOTE TO SCRIPTERS: I attempted to use this as a universal Telnet tool but it doesn't work, so I commented out the necessary areas for this to be Teamspeak-specific.

PS: I gurantee this is 100% virus/malware/trojan/etc - free. I have also posted the source if you want to compile it yourself or modify it.

~Chris

[edit: fixed a typo]

#cs
YATAT - Yet Another Teamspeak Admin Tool
Chris Embry
cembry90@aol.com
#ce
#include<Constants.au3>
#include<GUIConstantsEx.au3>
#include<WindowsConstants.au3>
#include<EditConstants.au3>
#include<StaticConstants.au3>
#include <TreeViewConstants.au3>
$gui = GUICreate("Telnet Tool", 800, 300)
GUICtrlCreateLabel("IP", 1, 1, 30, 20)
GUICtrlCreateLabel("Port", 1, 21, 30, 20)
GUICtrlCreateLabel("Serv Port", 151, 1, 70, 40)
;GUICtrlCreateLabel("Serv", 171, 1, 35, 40)
;GUICtrlCreateLabel("Port", 171, 21, 35, 40)
GUICtrlCreateLabel("Name", 341, 1, 30, 20)
GUICtrlCreateLabel("Pass", 341, 21, 30, 20)
;$ts = GUICtrlCreateCheckbox("Teamspeak?", 201, 21, 80, 20)
;GuiCtrlSetState($ts, $GUI_UNCHECKED)
$te = 0
Local $e1
Local $e2
Local $e3
Local $e4
Local $e5
Local $li
Local $w1
Local $x1
$ini = "settings.ini"
if not FileExists($ini) Then
    IniWrite($ini, "conf", "warn", "1")
    MsgBox(0, "Warning!", "Please be sure the server you are" & @CRLF & "attempting to establish a connection with exists" & @CRLF & "to ensure this progam functions correctly." & @CRLF & @CRLF & "This program will not warn you again unless" & @CRLF & "the settings file is moved, renamed, or deleted.")
EndIf
$ag = 0
$in = IniRead($ini, "conf", "read", -1)
if FileExists($ini) Then
    $ip = IniRead($ini, "conf", "IP", 0)
    $po = IniRead($ini, "conf", "PO", 0)
    $sv = IniRead($ini, "conf", "SV", 0)
    $un = IniRead($ini, "conf", "UN", 0)
    $up = IniRead($ini, "conf", "UP", 0)
Else
    $ip = ""
    $po = ""
    $sv = ""
    $un = ""
    $up = ""
EndIf
$ip = GUICtrlCreateInput($ip, 31, 1, 90, 20)
$po = GUICtrlCreateInput($po, 31, 21, 90, 20)
$sv = GUICtrlCreateInput($sv, 201, 1, 90, 20)
$un = GUICtrlCreateInput($un, 371, 1, 90, 20)
$up = GUICtrlCreateInput($up, 371, 21, 90, 20, $ES_PASSWORD)
;GUICtrlSetState($sv, $GUI_DISABLE)
;GUICtrlSetState($un, $GUI_DISABLE)
;GUICtrlSetState($up, $GUI_DISABLE)
$co = GUICtrlCreateButton("START", 511, 1, 40, 40)
$ou = GUICtrlCreateEdit("", 1, 41, 580, 220, $WS_HSCROLL + $WS_VSCROLL)
$cm = GUICtrlCreateInput("", 1, 261, 540, 20)
$cs = GUICtrlCreateButton("Send", 541, 261, 40, 20)
GUISetState(@SW_SHOW, $gui)
While 1
    $msg = GUIGetMsg($gui)
    Select
        Case $msg = $co
            GUICtrlDelete($co)
            $dc = GUICtrlCreateButton("STOP", 551, 1, 40, 40)
            $c1 = GUICtrlRead($ip)
            $c2 = GUICtrlRead($po)
            $c3 = GUICtrlRead($sv)
            $c4 = GUICtrlRead($un)
            $c5 = GUICtrlRead($up)
            di()
            $ic = 1
            IniWrite($ini, "conf", "ip", $c1)
            IniWrite($ini, "conf", "po", $c2)
            IniWrite($ini, "conf", "sv", $c3)
            IniWrite($ini, "conf", "un", $c4)
            IniWrite($ini, "conf", "up", $c5)
            If Not $ag = 1 Then
                TCPStartup()
                $so = TCPConnect($c1, $c2)
;               If $te = 1 Then
                    $se = TCPSend($so, "help" & @CRLF)
                    Sleep(1)
                    $re = TCPRecv($so, 65535)
                    GUICtrlSetData($ou, $re)
                    TCPSend($so, "sel " & $c3 & @CRLF)
                    TCPSend($so, "login " & $c4 & " " & $c5 & @CRLF)
                    Sleep(1)
                    $re = TCPRecv($so, 65535)
                    If $re = "OK" & @CRLF & "OK" & @CRLF Then
                        MsgBox(0, "Login Confirmed.", "Thank you for logging in.")
                        $li = 1
                    EndIf
                    GUICtrlSetData($ou, $re & @CRLF & GUICtrlRead($ou))
                    $ag = 1
;               EndIf
            EndIf
            If $li = 1 Then
                createhelp()
                $li = 0
            EndIf
            while 2
                $msg = GUIGetMsg($gui)
                If $msg = $dc Then
                    $ic = 0
                    TCPSend($so, "quit " & $c4 & " " & $c5 & @CRLF)
                    GUICtrlDelete($dc)
                    GUICtrlDelete($w1)
                    GUICtrlDelete($x1)
                    $co = GUICtrlCreateButton("START", 511, 1, 40, 40)
                    en()
                    $ag = 0
                    TCPCloseSocket($so)
                    TCPShutdown()
                    GUICtrlSetData($ou, "Disconnected from the server.")
                    ExitLoop
                ElseIf $msg = $cs Then
                    $cr = GUICtrlRead($cm)
                    TCPSend($so, $cr & @CRLF)
            ;TCPSend($so, $cr & @CRLF);sometimes have to send twice...
                    Sleep(1)
                    $re = TCPRecv($so, 65535)
                    guictrlsetdata($ou, $re & GUICtrlRead($ou)); & @CRLF & $re)
                ElseIf $msg = $gui_event_close Then
                    If $ic = 1 Then
                        MsgBox(0, "Error!", "You must disconnect before exiting.")
                    Else
                        Exit
                    EndIf
                EndIf
            WEnd
        
        Case $msg = $gui_event_close
            Exit
        Case $msg = $gui_event_minimize
            GUISetState(@SW_MINIMIZE, $gui)
        Case $msg = $gui_event_restore
            GUISetState(@SW_RESTORE, $gui)
#cs
        Case $msg = $ts
            If $te = 0 Then
                $te = 1
                GUICtrlSetState($sv, $GUI_ENABLE)
                GUICtrlSetState($un, $GUI_ENABLE)
                GUICtrlSetState($up, $GUI_ENABLE)
            ElseIf $te = 1 Then
                $te = 0
                GUICtrlSetState($sv, $GUI_DISABLE)
                GUICtrlSetState($un, $GUI_DISABLE)
                GUICtrlSetState($up, $GUI_DISABLE)
            EndIf
            
#ce

    Endselect
    Sleep(1)
WEnd
Func di()
    GUICtrlSetState($ip, $GUI_DISABLE)
    GUICtrlSetState($po, $GUI_DISABLE)
    GUICtrlSetState($sv, $GUI_DISABLE)
    GUICtrlSetState($un, $GUI_DISABLE)
    GUICtrlSetState($up, $GUI_DISABLE)
;   GUICtrlSetState($ts, $GUI_DISABLE)
EndFunc
Func en()
    GUICtrlSetState($ip, $GUI_ENABLE)
    GUICtrlSetState($po, $GUI_ENABLE)
;   If $te = 1 Then
        GUICtrlSetState($sv, $GUI_ENABLE)
        GUICtrlSetState($un, $GUI_ENABLE)
        GUICtrlSetState($up, $GUI_ENABLE)
;   EndIf
;   GUICtrlSetState($ts, $GUI_ENABLE)
EndFunc
Func createhelp()
    $w1 = GuiCtrlCreateTreeView(596, 6, 200, 220)
    
    $x1 = GuiCtrlCreateTreeViewItem("Server Commands", $w1)
    
    $y1 = GuiCtrlCreateTreeViewItem("<Message>", $x1)
    $z1 = GuiCtrlCreateTreeViewItem("msg", $y1)
    $z2 = GuiCtrlCreateTreeViewItem("msgu", $y1)
    $z3 = GuiCtrlCreateTreeViewItem("msgall", $y1)
    
    $y2 = GuiCtrlCreateTreeViewItem("<Login>", $x1)
    $z4 = GuiCtrlCreateTreeViewItem("login", $y2)
    $z5 = GuiCtrlCreateTreeViewItem("slogin", $y2)
        
    $y3 = GuiCtrlCreateTreeViewItem("<Account/Player>", $x1)
    $z6 = GuiCtrlCreateTreeViewItem("pl", $y3)
    $z7 = GuiCtrlCreateTreeViewItem("mptc", $y3)
    $z8 = GuiCtrlCreateTreeViewItem("pi", $y3)
    $z9 = GuiCtrlCreateTreeViewItem("dbpi", $y3)
    $z10 = GuiCtrlCreateTreeViewItem("fp", $y3)
    $z11 = GuiCtrlCreateTreeViewItem("dbfp", $y3)
    $z12 = GuiCtrlCreateTreeViewItem("sppriv", $y3)
    $z13 = GuiCtrlCreateTreeViewItem("dbuserlist", $y3)
    $z14 = GuiCtrlCreateTreeViewItem("dbuseradd", $y3)
    $z15 = GuiCtrlCreateTreeViewItem("dbuserdel", $y3)
    $z16 = GuiCtrlCreateTreeViewItem("dbuserchangepw", $y3)
    $z17 = GuiCtrlCreateTreeViewItem("dbuserchangeattribs", $y3)
    $z18 = GuiCtrlCreateTreeViewItem("dbuserid", $y3)
    $z19 = GuiCtrlCreateTreeViewItem("dbsuserlist", $y3)
    $z20 = GuiCtrlCreateTreeViewItem("dbsuseradd", $y3)
    $z21 = GuiCtrlCreateTreeViewItem("dbsuserdel", $y3)
    $z22 = GuiCtrlCreateTreeViewItem("dbsuserchangepw", $y3)
    
    $y4 = GuiCtrlCreateTreeViewItem("<Ban/Kick>", $x1)
    $z23 = GuiCtrlCreateTreeViewItem("kick", $y4)
    $z24 = GuiCtrlCreateTreeViewItem("removeclient", $y4)
    $z25 = GuiCtrlCreateTreeViewItem("ki", $y4)
    $z26 = GuiCtrlCreateTreeViewItem("banlist", $y4)
    $z27 = GuiCtrlCreateTreeViewItem("banadd", $y4)
    $z28 = GuiCtrlCreateTreeViewItem("bandel", $y4)
    $z29 = GuiCtrlCreateTreeViewItem("banclear", $y4)
    $z30 = GuiCtrlCreateTreeViewItem("banplayer", $y4)
    
    $y5 = GuiCtrlCreateTreeViewItem("<Server/Channel>", $x1)
    $z31 = GuiCtrlCreateTreeViewItem("sl", $y5)
    $z32 = GuiCtrlCreateTreeViewItem("cl", $y5)
    $z33 = GuiCtrlCreateTreeViewItem("sel", $y5)
    $z34 = GuiCtrlCreateTreeViewItem("si", $y5)
    $z35 = GuiCtrlCreateTreeViewItem("fc", $y5)
    $z36 = GuiCtrlCreateTreeViewItem("ci", $y5)
    $z37 = GuiCtrlCreateTreeViewItem("dbci", $y5)
    $z38 = GuiCtrlCreateTreeViewItem("dccl", $y5)
    $z39 = GuiCtrlCreateTreeViewItem("dbserverlist", $y5)
    
    $y6 = GuiCtrlCreateTreeViewItem("<Conn Info>", $x1)
    $z40 = GuiCtrlCreateTreeViewItem("ver", $y6)
    $z41 = GuiCtrlCreateTreeViewItem("gi", $y6)
    $z42 = GuiCtrlCreateTreeViewItem("gapl", $y6)
    $z43 = GuiCtrlCreateTreeViewItem("log", $y6)
    $z44 = GuiCtrlCreateTreeViewItem("logfind", $y6)
    $z45 = GuiCtrlCreateTreeViewItem("logmark", $y6)

    $y7 = GuiCtrlCreateTreeViewItem("<Start/Stop>", $x1)
    $z46 = GuiCtrlCreateTreeViewItem("serverstart", $y7)
    $z47 = GuiCtrlCreateTreeViewItem("serverstop", $y7)
    $z48 = GuiCtrlCreateTreeViewItem("serveradd", $y7)
    $z49 = GuiCtrlCreateTreeViewItem("serverdel", $y7)
    $z50 = GuiCtrlCreateTreeViewItem("serverset", $y7)

    $y8 = GuiCtrlCreateTreeViewItem("<Maintenance>", $x1)
    $z51 = GuiCtrlCreateTreeViewItem("checkserverok", $y8)
    $z52 = GuiCtrlCreateTreeViewItem("rehash", $y8)
    $z53 = GuiCtrlCreateTreeViewItem("lc", $y8)
    $z54 = GuiCtrlCreateTreeViewItem("globalset", $y8)
    $z55 = GuiCtrlCreateTreeViewItem("quit", $y8)
    
    $z56 = GuiCtrlCreateTreeViewItem("quit", $x1)
    GuiCtrlSetState($x1, $GUI_EXPAND)
EndFunc
Edited by cembry90

AutoIt Stuff:

 

UDFs: {Grow}

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...