gte Posted May 6, 2009 Share Posted May 6, 2009 This is probably a really easy thing, but I'm not sure how to do it and I've searched and not found an answer Every time I use the +=, my script will not build and fails at the + symbol, what is the syntax that needs to be used in? I'm trying to do this expandcollapse popup#include <ButtonConstants.au3> #include <ComboConstants.au3> #include <DateTimeConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #Include <GuiComboBox.au3> $Form4 = GUICreate("Password Dialog", 786, 339, -1, -1) GUISetIcon("D:\008.ico") $schtasktimelabel = GUICtrlCreateLabel("Enter Time in HH:MM:SS", 496, 40, 123, 17) $schtaskcreatebutton = GUICtrlCreateButton("Create the scheduled task", 608, 120, 83, 65, $BS_MULTILINE) $schtaskdate = GUICtrlCreateDate("2009/05/05 11:06:28", 320, 72, 186, 21, $WS_TABSTOP) $schtaskinputtime = GUICtrlCreateInput('xx:xx:xx', 520, 72, 65, 21) $schtaskampmmenu = GUICtrlCreateCombo('', 616, 72, 81, 25);, BitOR($CBS_DROPDOWNLIST,$CBS_AUTOHSCROLL)) _GUICtrlComboBox_SetEditText($schtaskampmmenu, "AM or PM?") $schtaskampm = GUICtrlSetData(-1, 'AM|PM') GUISetState(@SW_SHOW) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $schtaskcreatebutton createtask() EndSwitch WEnd func createtask() $am = '0' $pm = '12' $schtaskamorpm = guictrlread($schtaskampmmenu) if $schtaskamorpm = 'AM' Then $schtaskampmoutput = '+0' MsgBox(4096, "Test", " You selected AM ", 3) ElseIf $schtaskamorpm = "PM" Then $schtaskampmoutput = '+12' MsgBox(4096, "Test", " You selected PM ", 3) EndIf $schtaskstarttime = guictrlread($schtaskinputtime) += ($schtaskampmoutput) EndFunc Except I am using (at least) the += incorrectly??? After that I have to figure out how to only have it update/add to the first set of numbers in a 10:11:12 section of a cmd file :confused: HP OpenView ServiceCenter keep alive scriptRemote Desktop Login Script Link to comment Share on other sites More sharing options...
Triblade Posted May 6, 2009 Share Posted May 6, 2009 Try: $schtaskstarttime = guictrlread($schtaskinputtime) + $schtaskampmoutput You allready have a = My active project(s): A-maze-ing generator (generates a maze) My archived project(s): Pong3 (Multi-pinger) Link to comment Share on other sites More sharing options...
Xenobiologist Posted May 6, 2009 Share Posted May 6, 2009 Hi, you can use WM_Command to verify the input expandcollapse popup#include<Array.au3> #include<EditConstants.au3> #include<GUIConstantsEx.au3> #include<WindowsConstants.au3> ;Global $changed = False GUICreate("My GUI Zeiteingabe",200,100) ; will create a dialog box that when displayed is centered $edit = GUICtrlCreateInput(" :", 10, 30, 52, 20,$ES_NUMBER); Eingabebox GUICtrlSetFont(-1,10,600,0,"Courier New"); nichtproportionale Schrift gewählt, für die Optik des gleichbleibenden Abstandes vor dem ":" mit Leerzeichen GUICtrlSetLimit(-1,5) $edit1 = GUICtrlCreateInput(" :", 75, 30, 52, 20,$ES_NUMBER); Eingabebox GUICtrlSetFont(-1,10,600,0,"Courier New"); nichtproportionale Schrift gewählt, für die Optik des gleichbleibenden Abstandes vor dem ":" mit Leerzeichen GUICtrlSetLimit(-1,5) $edit2 = GUICtrlCreateInput(" :", 140, 30, 52, 20,$ES_NUMBER); Eingabebox GUICtrlSetFont(-1,10,600,0,"Courier New"); nichtproportionale Schrift gewählt, für die Optik des gleichbleibenden Abstandes vor dem ":" mit Leerzeichen GUICtrlSetLimit(-1,5) $btn = GUICtrlCreateButton("Ohne Funktion", 50, 70, 100, 20) GUISetState() GUIRegisterMsg($WM_COMMAND, "MY_WM_COMMAND") Send("{LEFT 3}") While 1 $msg = GUIGetMsg() Select Case $msg = $GUI_EVENT_CLOSE ExitLoop EndSelect WEnd Func MY_WM_COMMAND($hWnd, $msg, $wParam, $lParam) Local $backspc = 0 Local $nNotifyCode = _HiWord($wParam) Local $nID = _LoWord($wParam) Local $hCtrl = $lParam Switch $nID; aktuelle Inputbox Case $edit Or $edit1 Or $edit2 Switch $nNotifyCode Case $EN_CHANGE $temp = StringSplit(GUICtrlRead($nID),":") If @error Then _ArrayAdd($temp,"") EndIf $temp[1] = StringReplace($temp[1]," ","") If $temp[0] = 1 Then $temp[1] = StringLeft($temp[1],1)&" " GUICtrlSetData($nID,$temp[1]&":") Send("{LEFT 2}") EndIf Switch StringLen($temp[2]) Case 2 Send("{TAB}") Case 1 If NOT StringIsDigit($temp[1]) Then GuiCtrlSetData($nID," :") Send ("{LEFT 3}") EndIf If $temp[2] > 5 Then $temp[2]="" GuiCtrlSetData($nID,$temp[1]&":"&$temp[2]) EndIf Case 0 Switch StringLen($temp[1]) Case 2 Switch StringLeft($temp[1],1) Case 2 If $temp[1] > 23 Then $temp[1] = "2 " GuiCtrlSetData($nID,$temp[1]&":") send ("{LEFT 2}") Else GuiCtrlSetData($nID,$temp[1]&":") EndIf Case 1 GuiCtrlSetData($nID,$temp[1]&":") Case 0 GuiCtrlSetData($nID,$temp[1]&":") EndSwitch Case 1 Switch $temp[1] Case 3 to 9 $temp[1] = "0"&$temp[1] GuiCtrlSetData($nID,$temp[1]&":") Case 0 to 2 GuiCtrlSetData($nID,$temp[1]&" :") send ("{LEFT 2}") EndSwitch Case 0 GuiCtrlSetData($nID," :") send ("{LEFT 3}") EndSwitch EndSwitch Case $EN_SETFOCUS GuiCtrlSetData($nID," :") Send("{LEFT 3}") Case $EN_KILLFOCUS $temp = StringSplit(GUICtrlRead($nID),":") $temp[1] = StringReplace($temp[1]," ","") If $temp[0] = 1 Then _ArrayAdd($temp,"") If StringLen($temp[2]) = 2 Then If StringLen($temp[1]) = 2 Then Return Else GUICtrlSetData($nID," :") Return EndIf EndIf Switch StringisDigit($temp[1]) Case True Switch StringLen($temp[1]) Case 1 If $temp[1] > 2 Then $temp[1] = "0"&$temp[1] If $temp[1] <= 2 Then $temp[1] = " " Case 2 If $temp[2] > "" Then $temp[2] = $temp[2]&"0" GUICtrlSetData($nID,$temp[1]&":"&$temp[2]) EndIf EndSwitch If $temp[2] = "" Or $temp[2] = 0 Then $temp[2] = "00" GUICtrlSetData($nID,$temp[1]&":"&$temp[2]) EndIf Case False GUICtrlSetData($nID," :") EndSwitch EndSwitch EndSwitch EndFunc ;==>MY_WM_COMMAND Func _HiWord($x) Return BitShift($x, 16) EndFunc ;==>_HiWord Func _LoWord($x) Return BitAND($x, 0xFFFF) EndFunc ;==>_LoWord and maybe you should use _DateAdd to calculate the time like this expandcollapse popup#include <GUIConstants.au3> #include <date.au3> ; GUI-Design by Carsten8 #Region ### START Koda GUI section ### Form= $Form1 = GUICreate("Aktuelle Zeit", 300, 200, 193, 115) GUISetBkColor(0x000000) $Input0 = GUICtrlCreateLabel("Zeit in DE", 8, 8, 400, 30) GUICtrlSetFont(-1, 14, 400, 0, "Arial") GUICtrlSetColor(-1, 0x0000FF) GUICtrlSetBkColor(-1, 0x000000) $Input1 = GUICtrlCreateLabel("TAG", 8, 30, 400, 30) GUICtrlSetFont(-1, 14, 400, 0, "Arial") GUICtrlSetColor(-1, 0x00FF00) GUICtrlSetBkColor(-1, 0x000000) $Input2 = GUICtrlCreateLabel("Stunde", 8, 53, 300, 30) GUICtrlSetFont(-1, 14, 400, 0, "Arial") GUICtrlSetColor(-1, 0x00FF00) GUICtrlSetBkColor(-1, 0x000000) $Input3 = GUICtrlCreateLabel("Zeit in Korea", 8, 108, 400, 30) GUICtrlSetFont(-1, 14, 400, 0, "Arial") GUICtrlSetColor(-1, 0x0000FF) GUICtrlSetBkColor(-1, 0x000000) $Input4 = GUICtrlCreateLabel("TAG", 8, 130, 400, 30) GUICtrlSetFont(-1, 14, 400, 0, "Arial") GUICtrlSetColor(-1, 0x00FF00) GUICtrlSetBkColor(-1, 0x000000) $Input5 = GUICtrlCreateLabel("Stunde", 8, 153, 300, 30) GUICtrlSetFont(-1, 14, 400, 0, "Arial") GUICtrlSetColor(-1, 0x00FF00) GUICtrlSetBkColor(-1, 0x000000) #EndRegion ### END Koda GUI section ### AdlibEnable("_DateUpdate", 500) GUISetState() While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit EndSwitch WEnd Func _DateUpdate() $date = _NowCalc() GUICtrlSetData($Input2, _DateTimeFormat($date, 5)) GUICtrlSetData($Input1, _DateTimeFormat($date, 1)) $theirdate = _DateAdd("h", 8, $date) GUICtrlSetData($Input5, _DateTimeFormat($theirdate, 5)) GUICtrlSetData($Input4, _DateTimeFormat($theirdate, 1)) EndFunc ;==>_DateUpdate Mega Scripts & functions Organize Includes Let Scite organize the include files Yahtzee The game "Yahtzee" (Kniffel, DiceLion) LoginWrapper Secure scripts by adding a query (authentication) _RunOnlyOnThis UDF Make sure that a script can only be executed on ... (Windows / HD / ...) Internet-Café Server/Client Application Open CD, Start Browser, Lock remote client, etc. MultipleFuncsWithOneHotkey Start different funcs by hitting one hotkey different times Link to comment Share on other sites More sharing options...
gte Posted May 6, 2009 Author Share Posted May 6, 2009 I tried that, and it didn't error, I'm not sure why that was necessary, can you explain?Also, I can only get it to add when I hard code a single integer value for $schtaskinputtimeWhen I have it set as guictrlread or I have the value needed for the schtask, HH:MM:SS it excludes it and just displays the value of $schtaskinputtime???Try:$schtaskstarttime = guictrlread($schtaskinputtime) + $schtaskampmoutput You allready have a = HP OpenView ServiceCenter keep alive scriptRemote Desktop Login Script Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now