Difference between revisions of "Managing Multiple GUIs"

From AutoIt Wiki
Jump to navigation Jump to search
 
m (Added wiki header, minor typos, minor code cleanup)
Line 1: Line 1:
Having several GUIs on the screen at the same time is fairly common - but structuring your code to deal with this can seem quite daunting. However, as I hope this tutorial will demonstrate, it is nowhere near as difficult as it first appears.   
+
=Introduction=
 +
Having several GUIs on the screen at the same time is fairly common but structuring your code to deal with this can seem quite daunting. However, as I hope this tutorial will demonstrate, it is nowhere near as difficult as it first appears.   
  
[[MessageLoop Mode]]
+
=MessageLoop Mode=
  
Let us start with ''MessageLoop'' mode as this is where most new coders run into difficulties with multiple GUIS.  This example script illustrates the problem - it exits when the '''[X]''' is clicked on either GUI:
+
Let us start with ''MessageLoop'' mode as this is where most new coders run into difficulties with multiple GUIs.  This example script illustrates the problem - it exits when the '''[X]''' is clicked on either GUI:
-----------------------------------
+
<syntaxhighlight lang="autoit"> #include <GUIConstantsEx.au3>
<syntaxhighlight lang="autoit">
 
#include <GUIConstantsEx.au3>
 
 
   
 
   
 
  Global $hButton3 = 9999
 
  Global $hButton3 = 9999
Line 13: Line 12:
 
   
 
   
 
  Func gui1()
 
  Func gui1()
 
 
     $hGUI1 = GUICreate("Gui 1", 200, 200, 100, 100)
 
     $hGUI1 = GUICreate("Gui 1", 200, 200, 100, 100)
 
     $hButton1 = GUICtrlCreateButton("Msgbox 1", 10, 10, 80, 30)
 
     $hButton1 = GUICtrlCreateButton("Msgbox 1", 10, 10, 80, 30)
Line 32: Line 30:
 
         EndSwitch
 
         EndSwitch
 
     WEnd
 
     WEnd
 
 
  EndFunc  ;==>gui1
 
  EndFunc  ;==>gui1
 
   
 
   
 
  Func gui2()
 
  Func gui2()
 
 
     $hGUI2 = GUICreate("Gui 2", 200, 200, 350, 350)
 
     $hGUI2 = GUICreate("Gui 2", 200, 200, 350, 350)
 
     $hButton3 = GUICtrlCreateButton("MsgBox 2", 10, 10, 80, 30)
 
     $hButton3 = GUICtrlCreateButton("MsgBox 2", 10, 10, 80, 30)
 
     GUISetState()
 
     GUISetState()
+
  EndFunc  ;==>gui2 </syntaxhighlight>
  EndFunc  ;==>gui2
+
The script exits because it has a single ''GUIGetMsg'' loop and the ''$GUI_EVENT_CLOSE'' message is received when either '''[X]''' is clicked - we have no way of telling the messages from the two GUIs apart.
</syntaxhighlight>
 
-----------------------------------
 
The script exits because it has a single ''GUIGetMsg'' loop and the ''$GUI_EVENT_CLOSE'' message is received when either '''[X]''' is clicked - we have no way of telling the messages from the 2 GUIs apart.
 
  
 
The simplest solution is to disable the first GUI while the second is displayed:
 
The simplest solution is to disable the first GUI while the second is displayed:
-----------------------------------
+
<syntaxhighlight lang="autoit"> #include <GUIConstantsEx.au3>
<syntaxhighlight lang="autoit">
 
#include <GUIConstantsEx.au3>
 
 
   
 
   
 
  gui1()
 
  gui1()
 
   
 
   
 
  Func gui1()
 
  Func gui1()
 
 
     $hGUI1 = GUICreate("Gui 1", 200, 200, 100, 100)
 
     $hGUI1 = GUICreate("Gui 1", 200, 200, 100, 100)
 
     $hButton1 = GUICtrlCreateButton("Msgbox 1", 10, 10, 80, 30)
 
     $hButton1 = GUICtrlCreateButton("Msgbox 1", 10, 10, 80, 30)
Line 74: Line 64:
 
         EndSwitch
 
         EndSwitch
 
     WEnd
 
     WEnd
 
 
  EndFunc  ;==>gui1
 
  EndFunc  ;==>gui1
 
   
 
   
 
  Func gui2()
 
  Func gui2()
 
 
     $hGUI2 = GUICreate("Gui 2", 200, 200, 350, 350)
 
     $hGUI2 = GUICreate("Gui 2", 200, 200, 350, 350)
 
     $hButton3 = GUICtrlCreateButton("MsgBox 2", 10, 10, 80, 30)
 
     $hButton3 = GUICtrlCreateButton("MsgBox 2", 10, 10, 80, 30)
Line 93: Line 81:
 
  EndSwitch
 
  EndSwitch
 
  WEnd
 
  WEnd
+
  EndFunc  ;==>gui2 </syntaxhighlight>
  EndFunc  ;==>gui2
+
This may well be all you need, but it does mean that we cannot action any of the controls on the first GUI until we close the second.  And importantly we remain blocked in the ''While...WEnd'' loop within the ''gui2'' function - go and read the [[Interrupting a running function]] tutorial to see why this is less than ideal.
</syntaxhighlight>
 
-----------------------------------
 
This may well be all you need, but it does mean that we cannot action any of the controls on the first GUI until we close the second.  And importantly we remain blocked in the ''While...WEnd'' loop within the ''gui2'' function - go and read the "''Interrupting a running function''" tutorial to see why this is less than ideal.
 
  
 
So how can we deal with multiple GUIs visible at the same time?  Fortunately AutoIt offers us a simple way to differentiate between GUIs in ''MessageLoop'' mode.  Normally we use code like this in our idle loop to detect the messages sent by our GUI and its controls:
 
So how can we deal with multiple GUIs visible at the same time?  Fortunately AutoIt offers us a simple way to differentiate between GUIs in ''MessageLoop'' mode.  Normally we use code like this in our idle loop to detect the messages sent by our GUI and its controls:
-----------------------------------
+
<syntaxhighlight lang="autoit"> Switch GUIGetMsg()
<syntaxhighlight lang="autoit">
 
Switch GUIGetMsg()
 
 
     Case $GUI_EVENT_CLOSE
 
     Case $GUI_EVENT_CLOSE
 
         ; Code
 
         ; Code
 
     Case $hButton1
 
     Case $hButton1
 
         ; Code
 
         ; Code
  EndSwitch
+
  EndSwitch </syntaxhighlight>  
</syntaxhighlight>
+
But when dealing with multiple GUIs, we need to use the "''advanced''" parameter when we call ''GUIGetMsg''.  As explained in the Help file, the function then returns an array instead of a single value.  This array includes information on what exactly triggered the message, just what we need to distinguish the message that was sent (element['''0'''] of the array) and which GUI sent it (element['''1''']).  We can then amend our simple Switch statement above to read like this:  
-----------------------------------
+
<syntaxhighlight lang="autoit"> $aMsg = GUIGetMsg(1) ; Use advanced parameter to get an array returned
But when dealing with multiple GUIs, we need to use the "''advanced''" parameter when we call ''GUIGetMsg''.  As explained in the Help file, the function then returns an array instead of a single value.  This array includes information on what exactly triggered the message, just what we need to distinguish the message that was sent (element['''0'''] of the array) and which GUI sent it (element['''1''']).  We can then amend our simple Switch statement above to read like this:
+
 
-----------------------------------
 
<syntaxhighlight lang="autoit">
 
$aMsg = GUIGetMsg(1) ; Use advanced parameter to get an array returned
 
 
  Switch $aMsg[1] ; First check which GUI sent the message
 
  Switch $aMsg[1] ; First check which GUI sent the message
 
     Case $hGUI1
 
     Case $hGUI1
Line 129: Line 109:
 
                 ; Code
 
                 ; Code
 
         EndSwitch
 
         EndSwitch
  EndSwitch
+
  EndSwitch </syntaxhighlight>
</syntaxhighlight>
+
Although this looks complicated, if you take a moment to study it and you will quickly realise it is simply two ''Switch'' structures within an outer ''Switch''.  You have already dealt with a single ''Switch'' structure for a single GUI. All you are doing here is determining which ''Switch'' structure you want to use, and that depends on the GUI which sent the message which is why we need the outer ''Switch'' structure as a wrapper.
-----------------------------------
 
Although this looks complicated, if you take a moment to study it and you will quickly realise it is simply 2 ''Switch'' structures within an outer ''Switch''.  You have already dealt with a single ''Switch'' structure for a single GUI - all you are doing here is determining which ''Switch'' structure you want to use.  And that depends on the GUI which sent the message, which is why we need the outer ''Switch'' structure as a wrapper.
 
  
So here an example of how to manage 2 GUIs simultaneously using the "''advanced''" parameter with ''GUIGetMsg'':
+
So here is an example of how to manage two GUIs simultaneously using the "''advanced''" parameter with ''GUIGetMsg'':
-----------------------------------
+
<syntaxhighlight lang="autoit"> #include <GUIConstantsEx.au3>
<syntaxhighlight lang="autoit">
 
#include <GUIConstantsEx.au3>
 
 
   
 
   
 
  Global $hGUI2 = 9999, $hButton3 = 9999 ; Predeclare the variables with dummy values to prevent firing the Case statements
 
  Global $hGUI2 = 9999, $hButton3 = 9999 ; Predeclare the variables with dummy values to prevent firing the Case statements
Line 144: Line 120:
 
   
 
   
 
  Func gui1()
 
  Func gui1()
 
 
     $hGUI1 = GUICreate("Gui 1", 200, 200, 100, 100)
 
     $hGUI1 = GUICreate("Gui 1", 200, 200, 100, 100)
 
     $hButton1 = GUICtrlCreateButton("Msgbox 1", 10, 10, 80, 30)
 
     $hButton1 = GUICtrlCreateButton("Msgbox 1", 10, 10, 80, 30)
Line 173: Line 148:
 
         EndSwitch
 
         EndSwitch
 
     WEnd
 
     WEnd
 
 
  EndFunc  ;==>gui1
 
  EndFunc  ;==>gui1
 
   
 
   
 
  Func gui2()
 
  Func gui2()
 
 
     $hGUI2 = GUICreate("Gui 2", 200, 200, 350, 350)
 
     $hGUI2 = GUICreate("Gui 2", 200, 200, 350, 350)
 
     $hButton3 = GUICtrlCreateButton("MsgBox 2", 10, 10, 80, 30)
 
     $hButton3 = GUICtrlCreateButton("MsgBox 2", 10, 10, 80, 30)
 
     GUISetState()
 
     GUISetState()
+
  EndFunc  ;==>gui2 </syntaxhighlight>
  EndFunc  ;==>gui2
+
As you can see, we have a single ''While...WEnd'' loop which distinguishes between the two GUIs, both GUIs and their controls remain active and we stay in the main idle loop while we wait (you did read that other tutorial I hope!).
</syntaxhighlight>
 
-----------------------------------
 
As you can see, we have a single ''While...WEnd'' loop which distinguishes between the 2 GUIs, both GUIs and their controls remain active and we stay in the main idle loop while we wait (you did read that other tutorial I hope!).
 
  
[[OnEvent Mode]]
+
=OnEvent Mode=
  
 
Coders using ''OnEvent'' mode do not usually find the same problem with multiple GUIs as they can code separate functions for each ''$GUI_EVENT_CLOSE'' as shown here:
 
Coders using ''OnEvent'' mode do not usually find the same problem with multiple GUIs as they can code separate functions for each ''$GUI_EVENT_CLOSE'' as shown here:
-----------------------------------
+
<syntaxhighlight lang="autoit"> #include <GUIConstantsEx.au3>
<syntaxhighlight lang="autoit">
 
#include <GUIConstantsEx.au3>
 
 
   
 
   
 
  Opt("GUIOnEventMode", 1)
 
  Opt("GUIOnEventMode", 1)
Line 201: Line 169:
 
   
 
   
 
  Func gui1()
 
  Func gui1()
 
 
     $hGUI1 = GUICreate("Gui 1", 200, 200, 100, 100)
 
     $hGUI1 = GUICreate("Gui 1", 200, 200, 100, 100)
 
     GUISetOnEvent($GUI_EVENT_CLOSE, "On_Close_Main") ; Run this function when the main GUI [X] is clicked
 
     GUISetOnEvent($GUI_EVENT_CLOSE, "On_Close_Main") ; Run this function when the main GUI [X] is clicked
Line 213: Line 180:
 
         Sleep(10)
 
         Sleep(10)
 
     WEnd
 
     WEnd
 
 
  EndFunc  ;==>gui1
 
  EndFunc  ;==>gui1
 
   
 
   
 
  Func gui2()
 
  Func gui2()
 
 
     $hGUI2 = GUICreate("Gui 2", 200, 200, 350, 350)
 
     $hGUI2 = GUICreate("Gui 2", 200, 200, 350, 350)
 
     GUISetOnEvent($GUI_EVENT_CLOSE, "On_Close_Secondary") ; Run this function when the secondary GUI [X] is clicked
 
     GUISetOnEvent($GUI_EVENT_CLOSE, "On_Close_Secondary") ; Run this function when the secondary GUI [X] is clicked
Line 223: Line 188:
 
     GUICtrlSetOnEvent(-1, "On_Button3")
 
     GUICtrlSetOnEvent(-1, "On_Button3")
 
     GUISetState()
 
     GUISetState()
 
 
  EndFunc  ;==>gui2
 
  EndFunc  ;==>gui2
 
   
 
   
 
  Func On_Close_Main()
 
  Func On_Close_Main()
 
 
     Exit
 
     Exit
 
 
  EndFunc
 
  EndFunc
 
   
 
   
 
  Func On_Close_Secondary()
 
  Func On_Close_Secondary()
 
 
     GUIDelete($hGUI2)
 
     GUIDelete($hGUI2)
 
     GUICtrlSetState($hButton2, $GUI_ENABLE)
 
     GUICtrlSetState($hButton2, $GUI_ENABLE)
 
 
  EndFunc
 
  EndFunc
 
   
 
   
 
  Func On_Button1()
 
  Func On_Button1()
 
 
     MsgBox("", "MsgBox 1", "Test from Gui 1")
 
     MsgBox("", "MsgBox 1", "Test from Gui 1")
 
 
  EndFunc
 
  EndFunc
 
   
 
   
 
  Func On_Button2()
 
  Func On_Button2()
 
 
     GUICtrlSetState($hButton2, $GUI_DISABLE)
 
     GUICtrlSetState($hButton2, $GUI_DISABLE)
 
     gui2()
 
     gui2()
 
 
  EndFunc
 
  EndFunc
 
   
 
   
 
  Func On_Button3()
 
  Func On_Button3()
 
 
     MsgBox("", "MsgBox 2", "Test from Gui 2")
 
     MsgBox("", "MsgBox 2", "Test from Gui 2")
+
  EndFunc </syntaxhighlight>
  EndFunc
 
</syntaxhighlight>
 
-----------------------------------
 
 
But did you realise that you can also use what some people think of as a hybrid mode - using common ''OnEvent'' functions and then determining the specific GUI or control which called the function within the function?  As an added bonus, this approach may, depending on the circumstances, let you send parameters to the functions you call - something that you normally cannot do in ''OnEvent'' mode.
 
But did you realise that you can also use what some people think of as a hybrid mode - using common ''OnEvent'' functions and then determining the specific GUI or control which called the function within the function?  As an added bonus, this approach may, depending on the circumstances, let you send parameters to the functions you call - something that you normally cannot do in ''OnEvent'' mode.
-----------------------------------
+
<syntaxhighlight lang="autoit"> #include <GUIConstantsEx.au3>
<syntaxhighlight lang="autoit">
 
#include <GUIConstantsEx.au3>
 
 
   
 
   
 
  Opt("GUIOnEventMode", 1)
 
  Opt("GUIOnEventMode", 1)
Line 271: Line 221:
 
   
 
   
 
  Func gui1()
 
  Func gui1()
 
 
     $hGUI1 = GUICreate("Gui 1", 200, 200, 100, 100)
 
     $hGUI1 = GUICreate("Gui 1", 200, 200, 100, 100)
 
     GUISetOnEvent($GUI_EVENT_CLOSE, "On_Close") ; Call a common GUI close function
 
     GUISetOnEvent($GUI_EVENT_CLOSE, "On_Close") ; Call a common GUI close function
Line 283: Line 232:
 
         Sleep(10)
 
         Sleep(10)
 
     WEnd
 
     WEnd
 
 
  EndFunc  ;==>gui1
 
  EndFunc  ;==>gui1
 
   
 
   
 
  Func gui2()
 
  Func gui2()
 
 
     $hGUI2 = GUICreate("Gui 2", 200, 200, 350, 350)
 
     $hGUI2 = GUICreate("Gui 2", 200, 200, 350, 350)
 
     GUISetOnEvent($GUI_EVENT_CLOSE, "On_Close") ; Call a common GUI close function
 
     GUISetOnEvent($GUI_EVENT_CLOSE, "On_Close") ; Call a common GUI close function
Line 293: Line 240:
 
     GUICtrlSetOnEvent(-1, "On_Button") ; Call a common button function
 
     GUICtrlSetOnEvent(-1, "On_Button") ; Call a common button function
 
     GUISetState()
 
     GUISetState()
 
 
  EndFunc  ;==>gui2
 
  EndFunc  ;==>gui2
 
   
 
   
 
  Func On_Close()
 
  Func On_Close()
 
 
     Switch @GUI_WINHANDLE ; See which GUI sent the CLOSE message
 
     Switch @GUI_WINHANDLE ; See which GUI sent the CLOSE message
 
         Case $hGUI1
 
         Case $hGUI1
Line 305: Line 250:
 
             GUICtrlSetState($hButton2, $GUI_ENABLE)
 
             GUICtrlSetState($hButton2, $GUI_ENABLE)
 
     EndSwitch
 
     EndSwitch
 
 
  EndFunc
 
  EndFunc
 
   
 
   
 
  Func On_Button()
 
  Func On_Button()
 
 
     Switch @GUI_CTRLID ; See which button sent the message
 
     Switch @GUI_CTRLID ; See which button sent the message
 
         Case $hButton1
 
         Case $hButton1
Line 319: Line 262:
 
             MessageBox(2) ; We can call a function with parameters here <<<<<<<<<<<<<<<<<<<
 
             MessageBox(2) ; We can call a function with parameters here <<<<<<<<<<<<<<<<<<<
 
     EndSwitch
 
     EndSwitch
 
 
  EndFunc
 
  EndFunc
 
   
 
   
 
  Func MessageBox($iIndex)
 
  Func MessageBox($iIndex)
 
 
     MsgBox("", "MsgBox " & $iIndex, "Test from Gui " & $iIndex)
 
     MsgBox("", "MsgBox " & $iIndex, "Test from Gui " & $iIndex)
 
 
  EndFunc
 
  EndFunc
 
</syntaxhighlight>
 
</syntaxhighlight>
-----------------------------------
+
 
 +
=Summary=
 +
 
 
So you see that managing multiple GUIS is not as difficult as you might think.  One of these methods is bound to suit your script, but do not try and mix them - only one method per script please!
 
So you see that managing multiple GUIS is not as difficult as you might think.  One of these methods is bound to suit your script, but do not try and mix them - only one method per script please!

Revision as of 13:42, 11 November 2012

Introduction

Having several GUIs on the screen at the same time is fairly common but structuring your code to deal with this can seem quite daunting. However, as I hope this tutorial will demonstrate, it is nowhere near as difficult as it first appears.

MessageLoop Mode

Let us start with MessageLoop mode as this is where most new coders run into difficulties with multiple GUIs. This example script illustrates the problem - it exits when the [X] is clicked on either GUI:

 #include <GUIConstantsEx.au3>
 
 Global $hButton3 = 9999
 
 gui1()
 
 Func gui1()
     $hGUI1 = GUICreate("Gui 1", 200, 200, 100, 100)
     $hButton1 = GUICtrlCreateButton("Msgbox 1", 10, 10, 80, 30)
     $hButton2 = GUICtrlCreateButton("Show Gui 2", 10, 60, 80, 30)
     GUISetState()
 
     While 1
         Switch GUIGetMsg()
             Case $GUI_EVENT_CLOSE
                 ExitLoop
             Case $hButton1
                 MsgBox("", "MsgBox 1", "Test from Gui 1")
             Case $hButton2
                 GUICtrlSetState($hButton2, $GUI_DISABLE)
                 gui2()
             Case $hButton3
                 MsgBox("", "MsgBox 2", "Test from Gui 2") 
         EndSwitch
     WEnd
 EndFunc   ;==>gui1
 
 Func gui2()
     $hGUI2 = GUICreate("Gui 2", 200, 200, 350, 350)
     $hButton3 = GUICtrlCreateButton("MsgBox 2", 10, 10, 80, 30)
     GUISetState()
 EndFunc   ;==>gui2

The script exits because it has a single GUIGetMsg loop and the $GUI_EVENT_CLOSE message is received when either [X] is clicked - we have no way of telling the messages from the two GUIs apart.

The simplest solution is to disable the first GUI while the second is displayed:

 #include <GUIConstantsEx.au3>
 
 gui1()
 
 Func gui1()
     $hGUI1 = GUICreate("Gui 1", 200, 200, 100, 100)
     $hButton1 = GUICtrlCreateButton("Msgbox 1", 10, 10, 80, 30)
     $hButton2 = GUICtrlCreateButton("Show Gui 2", 10, 60, 80, 30)
     GUISetState()
 
     While 1
         Switch GUIGetMsg()
             Case $GUI_EVENT_CLOSE
                 ExitLoop
             Case $hButton1
                 MsgBox("", "MsgBox 1", "Test from Gui 1")
             Case $hButton2
                 ; Disable the first GUI
                 GUISetState(@SW_DISABLE, $hGUI1)
                 gui2()
                 ; Re-enable the first GUI
                 GUISetState(@SW_ENABLE, $hGUI1)
         EndSwitch
     WEnd
 EndFunc   ;==>gui1
 
 Func gui2()
     $hGUI2 = GUICreate("Gui 2", 200, 200, 350, 350)
     $hButton3 = GUICtrlCreateButton("MsgBox 2", 10, 10, 80, 30)
     GUISetState()
 
     While 1
         ; We can only get messages from the second GUI
         Switch GUIGetMsg()
             Case $GUI_EVENT_CLOSE
                 GUIDelete($hGUI2)
                 ExitLoop
             Case $hButton3
                 MsgBox("", "MsgBox 2", "Test from Gui 2")
 		EndSwitch
 	WEnd
 EndFunc   ;==>gui2

This may well be all you need, but it does mean that we cannot action any of the controls on the first GUI until we close the second. And importantly we remain blocked in the While...WEnd loop within the gui2 function - go and read the Interrupting a running function tutorial to see why this is less than ideal.

So how can we deal with multiple GUIs visible at the same time? Fortunately AutoIt offers us a simple way to differentiate between GUIs in MessageLoop mode. Normally we use code like this in our idle loop to detect the messages sent by our GUI and its controls:

 Switch GUIGetMsg()
     Case $GUI_EVENT_CLOSE
         ; Code
     Case $hButton1
         ; Code
 EndSwitch

But when dealing with multiple GUIs, we need to use the "advanced" parameter when we call GUIGetMsg. As explained in the Help file, the function then returns an array instead of a single value. This array includes information on what exactly triggered the message, just what we need to distinguish the message that was sent (element[0] of the array) and which GUI sent it (element[1]). We can then amend our simple Switch statement above to read like this:

 $aMsg = GUIGetMsg(1) ; Use advanced parameter to get an array returned

 Switch $aMsg[1] ; First check which GUI sent the message
     Case $hGUI1
         Switch $aMsg[0] ; Now check for the messages sent from $hGUI1
             Case $GUI_EVENT_CLOSE 
                 ; Code
             Case $hControl
                 ; Code
         EndSwitch
     Case $hGUI2
         Switch $aMsg[0] ; Now check for the messages sent from $hGUI2
             Case $GUI_EVENT_CLOSE
                 ; Code
             Case $hButton3
                 ; Code
         EndSwitch
 EndSwitch

Although this looks complicated, if you take a moment to study it and you will quickly realise it is simply two Switch structures within an outer Switch. You have already dealt with a single Switch structure for a single GUI. All you are doing here is determining which Switch structure you want to use, and that depends on the GUI which sent the message which is why we need the outer Switch structure as a wrapper.

So here is an example of how to manage two GUIs simultaneously using the "advanced" parameter with GUIGetMsg:

 #include <GUIConstantsEx.au3>
 
 Global $hGUI2 = 9999, $hButton3 = 9999 ; Predeclare the variables with dummy values to prevent firing the Case statements
 
 gui1()
 
 Func gui1()
     $hGUI1 = GUICreate("Gui 1", 200, 200, 100, 100)
     $hButton1 = GUICtrlCreateButton("Msgbox 1", 10, 10, 80, 30)
     $hButton2 = GUICtrlCreateButton("Show Gui 2", 10, 60, 80, 30)
     GUISetState()
 
     While 1
         $aMsg = GUIGetMsg(1) ; Use advanced parameter to get array
         Switch $aMsg[1] ; check which GUI sent the message
             Case $hGUI1
                 Switch $aMsg[0] ; Now check for the messages for $hGUI1
                     Case $GUI_EVENT_CLOSE ; If we get the CLOSE message from this GUI - we exit <<<<<<<<<<<<<<<
                         ExitLoop
                     Case $hButton1
                         MsgBox("", "MsgBox 1", "Test from Gui 1")
                     Case $hButton2
                         GUICtrlSetState($hButton2, $GUI_DISABLE)
                         gui2()
                 EndSwitch
             Case $hGUI2
                 Switch $aMsg[0] ; Now check for the messages for $hGUI2
                     Case $GUI_EVENT_CLOSE ; If we get the CLOSE message from this GUI - we just delete the GUI <<<<<<<<<<<<<<<
                         GUIDelete($hGUI2)
                         GUICtrlSetState($hButton2, $GUI_ENABLE)
                     Case $hButton3
                         MsgBox("", "MsgBox", "Test from Gui 2")
                 EndSwitch
         EndSwitch
     WEnd
 EndFunc   ;==>gui1
 
 Func gui2()
     $hGUI2 = GUICreate("Gui 2", 200, 200, 350, 350)
     $hButton3 = GUICtrlCreateButton("MsgBox 2", 10, 10, 80, 30)
     GUISetState()
 EndFunc   ;==>gui2

As you can see, we have a single While...WEnd loop which distinguishes between the two GUIs, both GUIs and their controls remain active and we stay in the main idle loop while we wait (you did read that other tutorial I hope!).

OnEvent Mode

Coders using OnEvent mode do not usually find the same problem with multiple GUIs as they can code separate functions for each $GUI_EVENT_CLOSE as shown here:

 #include <GUIConstantsEx.au3>
 
 Opt("GUIOnEventMode", 1)
 
 Global $hGUI2, $hButton2 ; Predeclare these variables
 
 gui1()
 
 Func gui1()
     $hGUI1 = GUICreate("Gui 1", 200, 200, 100, 100)
     GUISetOnEvent($GUI_EVENT_CLOSE, "On_Close_Main") ; Run this function when the main GUI [X] is clicked
     $hButton1 = GUICtrlCreateButton("Msgbox 1", 10, 10, 80, 30)
     GUICtrlSetOnEvent(-1, "On_Button1")
     $hButton2 = GUICtrlCreateButton("Show Gui 2", 10, 60, 80, 30)
     GUICtrlSetOnEvent(-1, "On_Button2")
     GUISetState()
 
     While 1
         Sleep(10)
     WEnd
 EndFunc   ;==>gui1
 
 Func gui2()
     $hGUI2 = GUICreate("Gui 2", 200, 200, 350, 350)
     GUISetOnEvent($GUI_EVENT_CLOSE, "On_Close_Secondary") ; Run this function when the secondary GUI [X] is clicked
     $hButton3 = GUICtrlCreateButton("MsgBox 2", 10, 10, 80, 30)
     GUICtrlSetOnEvent(-1, "On_Button3")
     GUISetState()
 EndFunc   ;==>gui2
 
 Func On_Close_Main()
     Exit
 EndFunc
 
 Func On_Close_Secondary()
     GUIDelete($hGUI2)
     GUICtrlSetState($hButton2, $GUI_ENABLE)
 EndFunc
 
 Func On_Button1()
     MsgBox("", "MsgBox 1", "Test from Gui 1")
 EndFunc
 
 Func On_Button2()
     GUICtrlSetState($hButton2, $GUI_DISABLE)
     gui2()
 EndFunc
 
 Func On_Button3()
     MsgBox("", "MsgBox 2", "Test from Gui 2")
 EndFunc

But did you realise that you can also use what some people think of as a hybrid mode - using common OnEvent functions and then determining the specific GUI or control which called the function within the function? As an added bonus, this approach may, depending on the circumstances, let you send parameters to the functions you call - something that you normally cannot do in OnEvent mode.

 #include <GUIConstantsEx.au3>
 
 Opt("GUIOnEventMode", 1)
 
 Global $hGUI1, $hGUI2 = 9999, $hButton1, $hButton2, $hButton3 = 9999 ; Predeclare the variables with dummy values to prevent firing the Case statements
 
 gui1()
 
 Func gui1()
     $hGUI1 = GUICreate("Gui 1", 200, 200, 100, 100)
     GUISetOnEvent($GUI_EVENT_CLOSE, "On_Close") ; Call a common GUI close function
     $hButton1 = GUICtrlCreateButton("Msgbox 1", 10, 10, 80, 30)
     GUICtrlSetOnEvent(-1, "On_Button") ; Call a common button function
     $hButton2 = GUICtrlCreateButton("Show Gui 2", 10, 60, 80, 30)
     GUICtrlSetOnEvent(-1, "On_Button") ; Call a common button function
     GUISetState()
 
     While 1
         Sleep(10)
     WEnd
 EndFunc   ;==>gui1
 
 Func gui2()
     $hGUI2 = GUICreate("Gui 2", 200, 200, 350, 350)
     GUISetOnEvent($GUI_EVENT_CLOSE, "On_Close") ; Call a common GUI close function
     $hButton3 = GUICtrlCreateButton("MsgBox 2", 10, 10, 80, 30)
     GUICtrlSetOnEvent(-1, "On_Button") ; Call a common button function
     GUISetState()
 EndFunc   ;==>gui2
 
 Func On_Close()
     Switch @GUI_WINHANDLE ; See which GUI sent the CLOSE message
         Case $hGUI1
             Exit ; If it was this GUI - we exit <<<<<<<<<<<<<<<
         Case $hGUI2
             GUIDelete($hGUI2) ; If it was this GUI - we just delete the GUI <<<<<<<<<<<<<<<
             GUICtrlSetState($hButton2, $GUI_ENABLE)
     EndSwitch
 EndFunc
 
 Func On_Button()
     Switch @GUI_CTRLID ; See which button sent the message
         Case $hButton1
             MessageBox(1) ; We can call a function with parameters here <<<<<<<<<<<<<<<<<<<
         Case $hButton2
             GUICtrlSetState($hButton2, $GUI_DISABLE)
             gui2()
         Case $hButton3
             MessageBox(2) ; We can call a function with parameters here <<<<<<<<<<<<<<<<<<<
     EndSwitch
 EndFunc
 
 Func MessageBox($iIndex)
     MsgBox("", "MsgBox " & $iIndex, "Test from Gui " & $iIndex)
 EndFunc

Summary

So you see that managing multiple GUIS is not as difficult as you might think. One of these methods is bound to suit your script, but do not try and mix them - only one method per script please!