SciTE4AutoIt3

From AutoIt Wiki
Revision as of 01:05, 10 August 2013 by Jaberwocky6669 (talk | contribs) (Better Structure, less direct references.)
Jump to navigation Jump to search

Introduction

SciTE4AutoIt3 is a specialist editor package based on the excellent SciTE editor. SciTE has been set up to compile AutoIt scripts and has been extended with a multitude of Lua scripts. SciTE4AutoIt3 may be downloaded here: SciTE4AutoIt3. Keep in mind that SciTE4AutoIt3 is not an official package. Direct any bug reports or feature requests to the AutoIt3 forum and not the bug tracker.

Syntax Highlighting

A demonstration of syntax highlighting using the default theme.
A demonstration of syntax highlighting using the default theme.

SciTE4AutoIt3 comes with a customized AutoIt3 lexer which enables syntax highlighting. Syntax highlighting enables the colorization of various code elements such as variables, strings, operators, comments etc. Syntax highlighting allows one to differentiate the various code elements such as keywords, variables, strings, control flow structures etc. quickly without having to specifically identify the element. To load a custom theme a user may press [Ctrl] + [1] to bring up SciTEConfig. When the Color Settings tab is selected a button labeled 'New Scheme' will appear at the bottom. Alternatively, the colors may be customized individually.

Some options that are available for customization include: White Space, Comment Line, Comment Block, Number, Function, Keyword, Macro and String.

Quick Tips

For anyone not familiar with SciTE, here are a few tips and tricks to help easily customize the installation. For any advanced info, visit the SciTE home page.

Help Files

To access the AutoIt3 helpfile the user may press [F1]. To quickly access help information on a specific function, simply click or highlight the desired function and press the [F1] key to bring up the help file on the relevant page. To access the SciTE4AutoIt3 helpfile the user may press [ctrl] + [F1]. For SciTE related help, use the key combination [Ctrl] + [F1] to bring up a help file detailing SciTE related help documentation.

Properties Files

Minor editing if SciTE's configuration files will be required to make use of the information in this section. It is important to the hierarchy of SciTE's configuration files.

There are four properties files used:

SciTE.properties Local properties file which may be present in the same directory as the file being edited. This file overrides any other properties files settings below. This file is user created.
SciTEDirectory.properties Directory properties file which may be present in the same or in a parent directory as the file being edited.

This file overrides all properties setting of the files below, but not the local properties settings aka SciTE.properties. This file is user created.

SciTEUser.properties User properties file, this file's settings override only the global properties settings aka SciTEGlobal.properties.

This file is found under the current logged on users profile directory.

SciTEGlobal.properties All settings in this file can be overridden by any of the above files.

Typically this file should not be edited. Use any of the above methods to implement a setting change. This file can be found in SciTE's installation directory.

Inline Errors

Intentional error prone code used to display the "Inline Error" feature.

In the latest version of SciTE, there exists a new feature called "Inline Errors". Inline Error marks are error messages that will appear in the source code within the Scintilla window. Inline errors may be quickly toggled using SciTEUser.properties.

Open the SciTE user properties file in a text editor by selecting from the SciTE menu Options. Open User Options File and add the following code to the file.

To disable:

error.inline=0

To enable:

error.inline=1

Selection Highlighting

Selection highlighting is a new feature which highlights other instances of the currently highlighted word or string. Due to the colors, sometimes it is hard to tell the selection apart. The default colors may be changed.

The feature may be toggled by editing SciTEUser.properties.

To disable:

highlight.current.word=0

To enable:

highlight.current.word=1

To change the color scheme, add the following to SciTEUser.properties.

highlight.current.word=1

# Edit the following property to change to the desired color.
highlight.current.word.colour=#000040

selection.alpha=50

# Edit the following property to change to the desired color.
selection.back=#F025A8

Colors in the Output Pane

SciTE has a console window which can be used to output information from running scripts. The function ConsoleWrite may be used in an AutoIt script to output text to the console. The colors of the text may be altered by prepending a string with special characters.

For example:

ConsoleWrite("This is plain text" & @LF)
ConsoleWrite("> This text will have a different color." & @LF)
ConsoleWrite("+ This text will have a different color." & @LF)
ConsoleWrite("- This text will have a different color." & @LF)
ConsoleWrite("! This text will have a different color." & @LF)

AutoIt3Wrapper

AutoIt3Wrapper directives allow for in depth control of the compilation and interpretation of AutoIt scripts. Some of these can be very useful under different circumstances. See AutoIt3Wrapper Directives for a full list of directives and their descriptions.

Obfuscator

Obfuscator may be used to strip away unused functions and global variables from the script prior to compilation. Functions and variables may be renamed to shorter three character names to save space and to provide some measure of obscurity. Note that Obfuscator is not guaranteed protection against decompilation.

Stripping Excess Code

For instance, if you have several includes, then you can often strip thousands of lines from your script using Obfuscator:

#AutoIt3Wrapper_Run_Obfuscator=y
#Obfuscator_Parameters=/sf /sv /om /cs=0 /cn=0

On a medium sized script, results are often like this:

>Running Obfuscator (1.0.27.0)  from:C:\Program Files\AutoIt3\SciTE cmdline:
- Iteration 1 Strip Functions result: Output  2580 lines and stripped 6741 lines
- Iteration 2 Strip Variables result: Output  1585 lines and stripped 950 lines
- Iteration 3 Strip Variables result: Output  1566 lines and stripped 19 lines
- Iteration 4 Start the actual Obfuscation.
+> Source    26190 lines 1447980 Characters.
+> Stripped  7710 Func/Var lines and  16862 comment lines, Total 1373871 Characters.
+> Saved     93% lines 94% Characters.
+> Obfuscator v1.0.27.0 finished obfuscating 1566 lines, created:C:\MyScript_Obfuscated.au3

Run_After and Run_Before Commands

Running the exe On Build

Often a build is performed as a testing procedure and so to have to continually open up Windows Explorer to find the exe is repetitive. Furthermore, if the script writes to the console using the function ConsoleWrite then the messages will not be written to SciTE's console pane. The solution is simple:

#AutoIt3Wrapper_Run_After="%out%"

This will run the program and read the console output to the SciTE debug frame.

Creating a Version Directory

When compiling, it is very possible that you want to go back to a previous version. If so, then it is neat to have a directory which will store all previous builds, without the need for you to manually copy and paste every time. Make sure you add these directives in last (after adding resources) as they might not be included in the copied result.

#AutoIt3Wrapper_Run_After=md "%scriptdir%\Versions\%fileversion%"
#AutoIt3Wrapper_Run_After=copy "%in%" "%scriptdir%\Versions\%fileversion%\%scriptfile%%fileversion%.au3"
#AutoIt3Wrapper_Run_After=copy "%out%" "%scriptdir%\Versions\%fileversion%\%scriptfile%%fileversion%.exe"

Using ResHacker

ResHacker is a very important programming tool for extracting and adding resources into executables. It has a very simple command line interface that allows it to be used easily using the "Run_After" directive. Adding a picture to an executable could be done like this:

#AutoIt3Wrapper_Run_After=ResHacker.exe -add %out%, %out%, MyPicture.bmp, BITMAP, RESOURCENAME, 0

NB: Reshacker.exe must be copied into the script directory for this to work.

If you then want to use the resources in your code, there is an excellent Resources UDF which will allow you to access the resources from within the exe.

Adding Original Source Code

When using the above tip on stripping excess code, the new source is not readable. As a result, using the standard directive for saving the source:

#AutoIt3Wrapper_Res_SaveSource=y

Would add the obfuscated code to the exe, which is not the desired result. The solution is to add it in manually. This code does not require any editing, so you can just copy and paste it in:

#AutoIt3Wrapper_Run_After=ResHacker.exe -add %out%, %out%, %scriptfile%.au3, RCDATA, SOURCE, 0

Extended Reshacker Info

ResHacker doesn't always return with a return code (rc) of not 0 if it fails, to get that info you need to read the ResHacker.log file that is created. This is also pretty simple to do:

#AutoIt3Wrapper_Run_After=ResHacker.exe -add %out%, %out%, MyPicture.bmp, BITMAP, RESOURCENAME, 0
#AutoIt3Wrapper_Run_After=TYPE ResHacker.log

The new output now looks like this:

>Running:ResHacker.exe -add C:\MyScript.exe, C:\MyScript.exe, MyPicture.bmp, BITMAP, RESOURCENAME, 0
>ResHacker.exe -add C:\MyScript.exe, C:\MyScript.exe, MyPicture.bmp, BITMAP, RESOURCENAME, 0 Ended   rc:0
>Running:TYPE ResHacker.log
[19 Jan 2010, 21:26:22]
ResHacker.exe  -add C:\MyScript.exe, C:\MyScript.exe, MyPicture.bmp, BITMAP, RESOURCENAME, 0
 Added: BITMAP,RESOURCENAME,0

Commands completed
>TYPE ResHacker.log Ended   rc:0

And an example of it showing an error:

>ResHacker.exe -add C:\MyScript.exe, C:\MyScript.exe, MyPicture.bmp, BITMAP, RESOURCENAME, 0 Ended   rc:0
>Running:TYPE ResHacker.log
[19 Jan 2010, 21:32:10]
ResHacker.exe  -add C:\MyScript.exe, C:\MyScript.exe, MyPicture.bmp, BITMAP, RESOURCENAME, 0
Error: "MyPicture.bmp" does not exist
>TYPE ResHacker.log Ended   rc:0

As you can see, Reshacker on its own returns rc: 0, usually indicating no error. This would have gone completely unnoticed except for the log file, which shows the error and an explanation.

Other Run_After and Run_Before Commands

You can use any commands you like in the Run_After and Run_Before directives. Examples such as "TYPE" have been shown above.

For a more complete list the following website is very useful: An A-Z Index of the Windows CMD Line

Other Wiki Pages

Adding Utilities to the SciTE Tools Menu

Adding UDFs to AutoIt and SciTE

Useful Lua links and scripts

SciTELua

Lua Website

Programming in Lua

lua-users wiki

SciTEScripts

SampleCode

AutoIt3 Forum: MouseHoverCallTips

AutoIt3 Forum: SciTE lua Tool To Make String Variable From Selected Text