pugh

I am reading and writing from my Android phone, so I haven't compiled this or even fully viewed/understood it. What is the purpose of the richedit since you don't want to be able to tab to it or click on it? If you don't need to interact with it in that way, perhaps a label field would work better? I am no great programmer but I like to tinker and I've used autoit for quite some time now

Thank you LordBoling, I will have to look into that. Yes, my code would be better with a Not in there. ; )

ok, my apologies if I should not have posted this at all, but I thought it might be useful information to other fools like me. mods, admins, and any others in high places -if I am so offensive as to deserve it, feel free to ban me for life ; ) I was going through and re-writing the URLs in my program to ones that should be accessible to all, rather than my local network addresses when I discovered the source of my problem: I had simply put the buttons in twice -a simple copy/paste gone awry OP: I have several buttons in a little GUI I've made, 2 of them are not working for some reason. In the code below I have commented out the references to names "$btnSaveVert" and "$btnSaveHoriz" (which originally had the "Save" shortened to "Sv", I wrote out "Save" when I first discovered they were not working) I finally went with "$btn1" and "$btn2" to rule out typos (but had used copy/paste before that, so I REALLY don't know how I could have had typos). The two buttons still refuse to do anything when clicked. I am on a Dell Optiplex 960 running Win7 Ent Ed I am using AutoIt 3.2.2.0 I've made several little GUIs before, some with many more buttons, this is the first I have seen this strange behavior. I welcome you to point out my glaring mistake, the one that's been staring me in the face for the last 5 hours. : ) #include <GUIConstants.au3> Opt("PixelCoordMode",0) Opt("WinTitleMatchMode",4) Opt("TrayIconDebug", 1) ;AutoItSetOption("WinTitleMatchMode", 4) Global $filename ; create folder if it does not exist $filename = "C:\mjrtHlpr\OEMgraph" If FileExists($filename) Then Sleep(500) Else MsgBox(4096,"", $filename & " does not exist. Creating now...") DirCreate("C:\mjrtHlpr\OEMgraph") EndIf ; create OEMpositions[USERNAME].ini file if it does not exist where [USERNAME] is the domain ID of the currently logged in user $filename = "C:\mjrtHlpr\OEMgraph\OEMpositions" & StringUpper(@UserName) & ".ini" If FileExists($filename) Then Sleep(500) Else MsgBox(4096,"", $filename & " does not exist. Creating now...") DirCreate("C:\mjrtHlpr\OEMgraph") IniWrite($filename,"HorizPos","xPos11","1681") IniWrite($filename,"HorizPos","yPos11","500") IniWrite($filename,"HorizPos","width11","580") IniWrite($filename,"HorizPos","height11","600") IniWrite($filename,"HorizPos","layer11","4") IniWrite($filename,"HorizPos","xPos12","2101") IniWrite($filename,"HorizPos","yPos12","500") IniWrite($filename,"HorizPos","width12","580") IniWrite($filename,"HorizPos","height12","600") IniWrite($filename,"HorizPos","layer12","3") IniWrite($filename,"HorizPos","xPos13","2521") IniWrite($filename,"HorizPos","yPos13","500") IniWrite($filename,"HorizPos","width13","580") IniWrite($filename,"HorizPos","height13","600") IniWrite($filename,"HorizPos","layer13","2") IniWrite($filename,"HorizPos","xPos14","2941") IniWrite($filename,"HorizPos","yPos14","500") IniWrite($filename,"HorizPos","width14","580") IniWrite($filename,"HorizPos","height14","600") IniWrite($filename,"HorizPos","layer14","1") IniWrite($filename,"ORIGHorizPos","xPos11","1681") IniWrite($filename,"ORIGHorizPos","yPos11","500") IniWrite($filename,"ORIGHorizPos","width11","580") IniWrite($filename,"ORIGHorizPos","height11","600") IniWrite($filename,"ORIGHorizPos","layer11","4") IniWrite($filename,"ORIGHorizPos","xPos12","2101") IniWrite($filename,"ORIGHorizPos","yPos12","500") IniWrite($filename,"ORIGHorizPos","width12","580") IniWrite($filename,"ORIGHorizPos","height12","600") IniWrite($filename,"ORIGHorizPos","layer12","3") IniWrite($filename,"ORIGHorizPos","xPos13","2521") IniWrite($filename,"ORIGHorizPos","yPos13","500") IniWrite($filename,"ORIGHorizPos","width13","580") IniWrite($filename,"ORIGHorizPos","height13","600") IniWrite($filename,"ORIGHorizPos","layer13","2") IniWrite($filename,"ORIGHorizPos","xPos14","2941") IniWrite($filename,"ORIGHorizPos","yPos14","500") IniWrite($filename,"ORIGHorizPos","width14","580") IniWrite($filename,"ORIGHorizPos","height14","600") IniWrite($filename,"ORIGHorizPos","layer14","1") IniWrite($filename,"VertPos","xPos11","2453") IniWrite($filename,"VertPos","yPos11","-286") IniWrite($filename,"VertPos","width11","917") IniWrite($filename,"VertPos","height11","578") IniWrite($filename,"VertPos","layer11","1") IniWrite($filename,"VertPos","xPos12","2453") IniWrite($filename,"VertPos","yPos12","-3") IniWrite($filename,"VertPos","width12","917") IniWrite($filename,"VertPos","height12","563") IniWrite($filename,"VertPos","layer12","2") IniWrite($filename,"VertPos","xPos13","2453") IniWrite($filename,"VertPos","yPos13","265") IniWrite($filename,"VertPos","width13","917") IniWrite($filename,"VertPos","height13","563") IniWrite($filename,"VertPos","layer13","3") IniWrite($filename,"VertPos","xPos14","2453") IniWrite($filename,"VertPos","yPos14","533") IniWrite($filename,"VertPos","width14","917") IniWrite($filename,"VertPos","height14","563") IniWrite($filename,"VertPos","layer14","4") IniWrite($filename,"ORIGVertPos","xPos11","2453") IniWrite($filename,"ORIGVertPos","yPos11","-286") IniWrite($filename,"ORIGVertPos","width11","917") IniWrite($filename,"ORIGVertPos","height11","578") IniWrite($filename,"ORIGVertPos","layer11","1") IniWrite($filename,"ORIGVertPos","xPos12","2453") IniWrite($filename,"ORIGVertPos","yPos12","-3") IniWrite($filename,"ORIGVertPos","width12","917") IniWrite($filename,"ORIGVertPos","height12","563") IniWrite($filename,"ORIGVertPos","layer12","2") IniWrite($filename,"ORIGVertPos","xPos13","2453") IniWrite($filename,"ORIGVertPos","yPos13","265") IniWrite($filename,"ORIGVertPos","width13","917") IniWrite($filename,"ORIGVertPos","height13","563") IniWrite($filename,"ORIGVertPos","layer13","3") IniWrite($filename,"ORIGVertPos","xPos14","2453") IniWrite($filename,"ORIGVertPos","yPos14","533") IniWrite($filename,"ORIGVertPos","width14","917") IniWrite($filename,"ORIGVertPos","height14","563") IniWrite($filename,"ORIGVertPos","layer14","4") IniWrite($filename,"CustPos","xPos11","2453") IniWrite($filename,"CustPos","yPos11","-286") IniWrite($filename,"CustPos","width11","917") IniWrite($filename,"CustPos","height11","578") IniWrite($filename,"CustPos","layer11","1") IniWrite($filename,"CustPos","xPos12","2453") IniWrite($filename,"CustPos","yPos12","-3") IniWrite($filename,"CustPos","width12","917") IniWrite($filename,"CustPos","height12","563") IniWrite($filename,"CustPos","layer12","2") IniWrite($filename,"CustPos","xPos13","2453") IniWrite($filename,"CustPos","yPos13","265") IniWrite($filename,"CustPos","width13","917") IniWrite($filename,"CustPos","height13","563") IniWrite($filename,"CustPos","layer13","3") IniWrite($filename,"CustPos","xPos14","2453") IniWrite($filename,"CustPos","yPos14","533") IniWrite($filename,"CustPos","width14","917") IniWrite($filename,"CustPos","height14","563") IniWrite($filename,"CustPos","layer14","4") IniWrite($filename,"SAVEDCustPos","xPos11","2453") IniWrite($filename,"SAVEDCustPos","yPos11","-286") IniWrite($filename,"SAVEDCustPos","width11","917") IniWrite($filename,"SAVEDCustPos","height11","578") IniWrite($filename,"SAVEDCustPos","layer11","1") IniWrite($filename,"SAVEDCustPos","xPos12","2453") IniWrite($filename,"SAVEDCustPos","yPos12","-3") IniWrite($filename,"SAVEDCustPos","width12","917") IniWrite($filename,"SAVEDCustPos","height12","563") IniWrite($filename,"SAVEDCustPos","layer12","2") IniWrite($filename,"SAVEDCustPos","xPos13","2453") IniWrite($filename,"SAVEDCustPos","yPos13","265") IniWrite($filename,"SAVEDCustPos","width13","917") IniWrite($filename,"SAVEDCustPos","height13","563") IniWrite($filename,"SAVEDCustPos","layer13","3") IniWrite($filename,"SAVEDCustPos","xPos14","2453") IniWrite($filename,"SAVEDCustPos","yPos14","533") IniWrite($filename,"SAVEDCustPos","width14","917") IniWrite($filename,"SAVEDCustPos","height14","563") IniWrite($filename,"SAVEDCustPos","layer14","4") EndIf GUICreate("OEMgraph Helper",220,690,(@DesktopWidth-225),0) ; creates interface GUISetFont(9, 300) $btnSvVert = GUICtrlCreateButton ("save vert", 20, 625, 85, 20) $btnSvHoriz = GUICtrlCreateButton ("save horiz", 115, 625, 85, 20) $btn11open = GUICtrlCreateButton ("OEM prd11", 20, 5, 85, 20) $btn12open = GUICtrlCreateButton ("OEM prd12", 115, 5, 85, 20) $btn13open = GUICtrlCreateButton ("OEM prd13", 20, 45, 85, 20) $btn14open = GUICtrlCreateButton ("OEM prd14", 115, 45, 85, 20) $btnMoveVert = GUICtrlCreateButton ("Move Prod Windows - Vert", 20, 85, 180, 20) $btnMoveHoriz = GUICtrlCreateButton ("Move Prod Windows - Horiz", 20, 125, 180, 20) $btnMoveCust = GUICtrlCreateButton ("Move Prod Windows - Custom", 20, 165, 180, 20) $btnVertReset = GUICtrlCreateButton ("Reset Vertical to Default", 20, 205, 180, 20) $btnHorizReset = GUICtrlCreateButton ("Reset Horizontal to Default", 20, 245, 180, 20) $btnDummy = GUICtrlCreateButton (" placeholder ", 20, 285, 180, 20) $btnCustReset = GUICtrlCreateButton ("Load Saved Custom", 20, 325, 180, 20) $btnPrd11values = GUICtrlCreateButton ("click to update prd11 values", 20, 365, 180, 20) GUICtrlSetTip($btnPrd11values, "top level cannot be obtained, it is set manually or loaded from defaults") $lblPrd11x = GUICtrlCreateLabel ("x", 25, 385, 25, 20) GUICtrlSetTip($lblPrd11x, "x and y coords are the left uppermost corner of window") $lblPrd11y = GUICtrlCreateLabel ("y", 70, 385, 25, 20) GUICtrlSetTip($lblPrd11y, "x and y coords are the left uppermost corner of window") $lblPrd11width = GUICtrlCreateLabel ("width", 100, 385, 40, 20) $lblPrd11height = GUICtrlCreateLabel ("height", 140, 385, 40, 20) $lblPrd11layer = GUICtrlCreateLabel ("top lvl", 185, 385, 40, 20) GUICtrlSetTip($lblPrd11layer, "top level in regards to overlapping, layers/values are 1-4","") $txtPrd11x = GUICtrlCreateInput ("", 5, 405, 40, 20) $txtPrd11y = GUICtrlCreateInput ("", 50, 405, 40, 20) $txtPrd11width = GUICtrlCreateInput ("", 95, 405, 40, 20) $txtPrd11height = GUICtrlCreateInput ("", 140, 405, 40, 20) $txtPrd11layer = GUICtrlCreateInput ("", 190, 405, 20, 20) $btnPrd12values = GUICtrlCreateButton ("click to update prd12 values", 20, 425, 180, 20) GUICtrlSetTip($btnPrd12values, "top level cannot be obtained, it is set manually or loaded from defaults") $lblPrd12x = GUICtrlCreateLabel ("x", 25, 445, 25, 20) GUICtrlSetTip($lblPrd12x, "x and y coords are the left uppermost corner of window") $lblPrd12y = GUICtrlCreateLabel ("y", 70, 445, 25, 20) GUICtrlSetTip($lblPrd12y, "x and y coords are the left uppermost corner of window") $lblPrd12width = GUICtrlCreateLabel ("width", 100, 445, 40, 20) $lblPrd12height = GUICtrlCreateLabel ("height", 140, 445, 40, 20) $lblPrd12layer = GUICtrlCreateLabel ("top lvl", 185, 445, 40, 20) GUICtrlSetTip($lblPrd12layer, "top level in regards to overlapping, layers/values are 1-4","") $txtPrd12x = GUICtrlCreateInput ("", 5, 465, 40, 20) $txtPrd12y = GUICtrlCreateInput ("", 50, 465, 40, 20) $txtPrd12width = GUICtrlCreateInput ("", 95, 465, 40, 20) $txtPrd12height = GUICtrlCreateInput ("", 140, 465, 40, 20) $txtPrd12layer = GUICtrlCreateInput ("", 190, 465, 20, 20) $btnPrd13values = GUICtrlCreateButton ("click to update prd13 values", 20, 485, 180, 20) GUICtrlSetTip($btnPrd13values, "top level cannot be obtained, it is set manually or loaded from defaults") $lblPrd13x = GUICtrlCreateLabel ("x", 25, 505, 25, 20) GUICtrlSetTip($lblPrd13x, "x and y coords are the left uppermost corner of window") $lblPrd13y = GUICtrlCreateLabel ("y", 70, 505, 25, 20) GUICtrlSetTip($lblPrd13y, "x and y coords are the left uppermost corner of window") $lblPrd13width = GUICtrlCreateLabel ("width", 100, 505, 40, 20) $lblPrd13height = GUICtrlCreateLabel ("height", 140, 505, 40, 20) $lblPrd13layer = GUICtrlCreateLabel ("top lvl", 185, 505, 40, 20) GUICtrlSetTip($lblPrd13layer, "top level in regards to overlapping, layers/values are 1-4","") $txtPrd13x = GUICtrlCreateInput ("", 5, 525, 40, 20) $txtPrd13y = GUICtrlCreateInput ("", 50, 525, 40, 20) $txtPrd13width = GUICtrlCreateInput ("", 95, 525, 40, 20) $txtPrd13height = GUICtrlCreateInput ("", 140, 525, 40, 20) $txtPrd13layer = GUICtrlCreateInput ("", 190, 525, 20, 20) $btnPrd14values = GUICtrlCreateButton ("click to update prd14 values", 20, 545, 180, 20) GUICtrlSetTip($btnPrd14values, "top level cannot be obtained" & @CRLF & "it is set manually or loaded from defaults") $lblPrd14x = GUICtrlCreateLabel ("x", 25, 565, 25, 20) GUICtrlSetTip($lblPrd14x, "x and y coords are the left uppermost corner of window") $lblPrd14y = GUICtrlCreateLabel ("y", 70, 565, 25, 20) GUICtrlSetTip($lblPrd14y, "x and y coords are the left uppermost corner of window") $lblPrd14width = GUICtrlCreateLabel ("width", 100, 565, 40, 20) $lblPrd14height = GUICtrlCreateLabel ("height", 140, 565, 40, 20) $lblPrd14layer = GUICtrlCreateLabel ("top lvl", 185, 565, 40, 20) GUICtrlSetTip($lblPrd14layer, "top level in regards to overlapping, layers/values are 1-4","") $txtPrd14x = GUICtrlCreateInput ("", 5, 585, 40, 20) $txtPrd14y = GUICtrlCreateInput ("", 50, 585, 40, 20) $txtPrd14width = GUICtrlCreateInput ("", 95, 585, 40, 20) $txtPrd14height = GUICtrlCreateInput ("", 140, 585, 40, 20) $txtPrd14layer = GUICtrlCreateInput ("", 190, 585, 20, 20) ;$btnSaveVert = GUICtrlCreateButton ("save vert", 20, 625, 85, 20) ;$btnSaveHoriz = GUICtrlCreateButton ("save horiz", 115, 625, 85, 20) $btn1 = GUICtrlCreateButton ("save vert", 20, 625, 85, 20) $btn2 = GUICtrlCreateButton ("save horiz", 115, 625, 85, 20) $btnSaveCust = GUICtrlCreateButton ("save custom", 20, 665, 85, 20) $btnHelp = GUICtrlCreateButton ("help me", 115, 665, 85, 20) GUICtrlSetData($txtPrd11x,IniRead($filename,"VertPos","xPos11","")) GUICtrlSetData($txtPrd11y,IniRead($filename,"VertPos","yPos11","")) GUICtrlSetData($txtPrd11width,IniRead($filename,"VertPos","width11","")) GUICtrlSetData($txtPrd11height,IniRead($filename,"VertPos","height11","")) GUICtrlSetData($txtPrd11layer,IniRead($filename,"VertPos","layer11","")) GUICtrlSetData($txtPrd12x,IniRead($filename,"VertPos","xPos12","")) GUICtrlSetData($txtPrd12y,IniRead($filename,"VertPos","yPos12","")) GUICtrlSetData($txtPrd12width,IniRead($filename,"VertPos","width12","")) GUICtrlSetData($txtPrd12height,IniRead($filename,"VertPos","height12","")) GUICtrlSetData($txtPrd12layer,IniRead($filename,"VertPos","layer12","")) GUICtrlSetData($txtPrd13x,IniRead($filename,"VertPos","xPos13","")) GUICtrlSetData($txtPrd13y,IniRead($filename,"VertPos","yPos13","")) GUICtrlSetData($txtPrd13width,IniRead($filename,"VertPos","width13","")) GUICtrlSetData($txtPrd13height,IniRead($filename,"VertPos","height13","")) GUICtrlSetData($txtPrd13layer,IniRead($filename,"VertPos","layer13","")) GUICtrlSetData($txtPrd14x,IniRead($filename,"VertPos","xPos14","")) GUICtrlSetData($txtPrd14y,IniRead($filename,"VertPos","yPos14","")) GUICtrlSetData($txtPrd14width,IniRead($filename,"VertPos","width14","")) GUICtrlSetData($txtPrd14height,IniRead($filename,"VertPos","height14","")) GUICtrlSetData($txtPrd14layer,IniRead($filename,"VertPos","layer14","")) GUISetState () ; Run the GUI until the dialog is closed While 1 $msg = GUIGetMsg() If $msg = $GUI_EVENT_CLOSE Then ExitLoop Select Case $msg = $btn11open Run("c:\progra~2\intern~1\iexplore.exe https://..../waitDetails?event=doLoad&target=EBSPRD1_EBSPRD11&type=oracle_database&waitClass=Overview&datasource=SQL") Case $msg = $btn12open Run("c:\progra~2\intern~1\iexplore.exe https://..../waitDetails?event=doLoad&target=EBSPRD1_EBSPRD12&type=oracle_database&waitClass=Overview&datasource=SQL") Case $msg = $btn13open Run("c:\progra~2\intern~1\iexplore.exe https://..../waitDetails?event=doLoad&target=EBSPRD1_EBSPRD13&type=oracle_database&waitClass=Overview&datasource=SQL") Case $msg = $btn14open Run("c:\progra~2\intern~1\iexplore.exe https://..../waitDetails?event=doLoad&target=EBSPRD1_EBSPRD14&type=oracle_database&waitClass=Overview&datasource=SQL") Case $msg = $btnMoveVert If IniRead($filename,"VertPos","layer11","") = 4 Then MoveEm("11",IniRead($filename,"VertPos","xPos11",""),IniRead($filename,"VertPos","yPos11",""),IniRead($filename,"VertPos","width11",""),IniRead($filename,"VertPos","height11","")) If IniRead($filename,"VertPos","layer12","") = 4 Then MoveEm("12",IniRead($filename,"VertPos","xPos12",""),IniRead($filename,"VertPos","yPos12",""),IniRead($filename,"VertPos","width12",""),IniRead($filename,"VertPos","height12","")) If IniRead($filename,"VertPos","layer13","") = 4 Then MoveEm("13",IniRead($filename,"VertPos","xPos13",""),IniRead($filename,"VertPos","yPos13",""),IniRead($filename,"VertPos","width13",""),IniRead($filename,"VertPos","height13","")) If IniRead($filename,"VertPos","layer14","") = 4 Then MoveEm("14",IniRead($filename,"VertPos","xPos14",""),IniRead($filename,"VertPos","yPos14",""),IniRead($filename,"VertPos","width14",""),IniRead($filename,"VertPos","height14","")) If IniRead($filename,"VertPos","layer11","") = 3 Then MoveEm("11",IniRead($filename,"VertPos","xPos11",""),IniRead($filename,"VertPos","yPos11",""),IniRead($filename,"VertPos","width11",""),IniRead($filename,"VertPos","height11","")) If IniRead($filename,"VertPos","layer12","") = 3 Then MoveEm("12",IniRead($filename,"VertPos","xPos12",""),IniRead($filename,"VertPos","yPos12",""),IniRead($filename,"VertPos","width12",""),IniRead($filename,"VertPos","height12","")) If IniRead($filename,"VertPos","layer13","") = 3 Then MoveEm("13",IniRead($filename,"VertPos","xPos13",""),IniRead($filename,"VertPos","yPos13",""),IniRead($filename,"VertPos","width13",""),IniRead($filename,"VertPos","height13","")) If IniRead($filename,"VertPos","layer14","") = 3 Then MoveEm("14",IniRead($filename,"VertPos","xPos14",""),IniRead($filename,"VertPos","yPos14",""),IniRead($filename,"VertPos","width14",""),IniRead($filename,"VertPos","height14","")) If IniRead($filename,"VertPos","layer11","") = 2 Then MoveEm("11",IniRead($filename,"VertPos","xPos11",""),IniRead($filename,"VertPos","yPos11",""),IniRead($filename,"VertPos","width11",""),IniRead($filename,"VertPos","height11","")) If IniRead($filename,"VertPos","layer12","") = 2 Then MoveEm("12",IniRead($filename,"VertPos","xPos12",""),IniRead($filename,"VertPos","yPos12",""),IniRead($filename,"VertPos","width12",""),IniRead($filename,"VertPos","height12","")) If IniRead($filename,"VertPos","layer13","") = 2 Then MoveEm("13",IniRead($filename,"VertPos","xPos13",""),IniRead($filename,"VertPos","yPos13",""),IniRead($filename,"VertPos","width13",""),IniRead($filename,"VertPos","height13","")) If IniRead($filename,"VertPos","layer14","") = 2 Then MoveEm("14",IniRead($filename,"VertPos","xPos14",""),IniRead($filename,"VertPos","yPos14",""),IniRead($filename,"VertPos","width14",""),IniRead($filename,"VertPos","height14","")) If IniRead($filename,"VertPos","layer11","") = 1 Then MoveEm("11",IniRead($filename,"VertPos","xPos11",""),IniRead($filename,"VertPos","yPos11",""),IniRead($filename,"VertPos","width11",""),IniRead($filename,"VertPos","height11","")) If IniRead($filename,"VertPos","layer12","") = 1 Then MoveEm("12",IniRead($filename,"VertPos","xPos12",""),IniRead($filename,"VertPos","yPos12",""),IniRead($filename,"VertPos","width12",""),IniRead($filename,"VertPos","height12","")) If IniRead($filename,"VertPos","layer13","") = 1 Then MoveEm("13",IniRead($filename,"VertPos","xPos13",""),IniRead($filename,"VertPos","yPos13",""),IniRead($filename,"VertPos","width13",""),IniRead($filename,"VertPos","height13","")) If IniRead($filename,"VertPos","layer14","") = 1 Then MoveEm("14",IniRead($filename,"VertPos","xPos14",""),IniRead($filename,"VertPos","yPos14",""),IniRead($filename,"VertPos","width14",""),IniRead($filename,"VertPos","height14","")) GUICtrlSetData($txtPrd11x,IniRead($filename,"VertPos","xPos11","")) GUICtrlSetData($txtPrd11y,IniRead($filename,"VertPos","yPos11","")) GUICtrlSetData($txtPrd11width,IniRead($filename,"VertPos","width11","")) GUICtrlSetData($txtPrd11height,IniRead($filename,"VertPos","height11","")) GUICtrlSetData($txtPrd11layer,IniRead($filename,"VertPos","layer11","")) GUICtrlSetData($txtPrd12x,IniRead($filename,"VertPos","xPos12","")) GUICtrlSetData($txtPrd12y,IniRead($filename,"VertPos","yPos12","")) GUICtrlSetData($txtPrd12width,IniRead($filename,"VertPos","width12","")) GUICtrlSetData($txtPrd12height,IniRead($filename,"VertPos","height12","")) GUICtrlSetData($txtPrd12layer,IniRead($filename,"VertPos","layer12","")) GUICtrlSetData($txtPrd13x,IniRead($filename,"VertPos","xPos13","")) GUICtrlSetData($txtPrd13y,IniRead($filename,"VertPos","yPos13","")) GUICtrlSetData($txtPrd13width,IniRead($filename,"VertPos","width13","")) GUICtrlSetData($txtPrd13height,IniRead($filename,"VertPos","height13","")) GUICtrlSetData($txtPrd13layer,IniRead($filename,"VertPos","layer13","")) GUICtrlSetData($txtPrd14x,IniRead($filename,"VertPos","xPos14","")) GUICtrlSetData($txtPrd14y,IniRead($filename,"VertPos","yPos14","")) GUICtrlSetData($txtPrd14width,IniRead($filename,"VertPos","width14","")) GUICtrlSetData($txtPrd14height,IniRead($filename,"VertPos","height14","")) GUICtrlSetData($txtPrd14layer,IniRead($filename,"VertPos","layer14","")) Case $msg = $btnMoveHoriz If IniRead($filename,"HorizPos","layer11","") = 4 Then MoveEm("11",IniRead($filename,"HorizPos","xPos11",""),IniRead($filename,"HorizPos","yPos11",""),IniRead($filename,"HorizPos","width11",""),IniRead($filename,"HorizPos","height11","")) If IniRead($filename,"HorizPos","layer12","") = 4 Then MoveEm("12",IniRead($filename,"HorizPos","xPos12",""),IniRead($filename,"HorizPos","yPos12",""),IniRead($filename,"HorizPos","width12",""),IniRead($filename,"HorizPos","height12","")) If IniRead($filename,"HorizPos","layer13","") = 4 Then MoveEm("13",IniRead($filename,"HorizPos","xPos13",""),IniRead($filename,"HorizPos","yPos13",""),IniRead($filename,"HorizPos","width13",""),IniRead($filename,"HorizPos","height13","")) If IniRead($filename,"HorizPos","layer14","") = 4 Then MoveEm("14",IniRead($filename,"HorizPos","xPos14",""),IniRead($filename,"HorizPos","yPos14",""),IniRead($filename,"HorizPos","width14",""),IniRead($filename,"HorizPos","height14","")) If IniRead($filename,"HorizPos","layer11","") = 3 Then MoveEm("11",IniRead($filename,"HorizPos","xPos11",""),IniRead($filename,"HorizPos","yPos11",""),IniRead($filename,"HorizPos","width11",""),IniRead($filename,"HorizPos","height11","")) If IniRead($filename,"HorizPos","layer12","") = 3 Then MoveEm("12",IniRead($filename,"HorizPos","xPos12",""),IniRead($filename,"HorizPos","yPos12",""),IniRead($filename,"HorizPos","width12",""),IniRead($filename,"HorizPos","height12","")) If IniRead($filename,"HorizPos","layer13","") = 3 Then MoveEm("13",IniRead($filename,"HorizPos","xPos13",""),IniRead($filename,"HorizPos","yPos13",""),IniRead($filename,"HorizPos","width13",""),IniRead($filename,"HorizPos","height13","")) If IniRead($filename,"HorizPos","layer14","") = 3 Then MoveEm("14",IniRead($filename,"HorizPos","xPos14",""),IniRead($filename,"HorizPos","yPos14",""),IniRead($filename,"HorizPos","width14",""),IniRead($filename,"HorizPos","height14","")) If IniRead($filename,"HorizPos","layer11","") = 2 Then MoveEm("11",IniRead($filename,"HorizPos","xPos11",""),IniRead($filename,"HorizPos","yPos11",""),IniRead($filename,"HorizPos","width11",""),IniRead($filename,"HorizPos","height11","")) If IniRead($filename,"HorizPos","layer12","") = 2 Then MoveEm("12",IniRead($filename,"HorizPos","xPos12",""),IniRead($filename,"HorizPos","yPos12",""),IniRead($filename,"HorizPos","width12",""),IniRead($filename,"HorizPos","height12","")) If IniRead($filename,"HorizPos","layer13","") = 2 Then MoveEm("13",IniRead($filename,"HorizPos","xPos13",""),IniRead($filename,"HorizPos","yPos13",""),IniRead($filename,"HorizPos","width13",""),IniRead($filename,"HorizPos","height13","")) If IniRead($filename,"HorizPos","layer14","") = 2 Then MoveEm("14",IniRead($filename,"HorizPos","xPos14",""),IniRead($filename,"HorizPos","yPos14",""),IniRead($filename,"HorizPos","width14",""),IniRead($filename,"HorizPos","height14","")) If IniRead($filename,"HorizPos","layer11","") = 1 Then MoveEm("11",IniRead($filename,"HorizPos","xPos11",""),IniRead($filename,"HorizPos","yPos11",""),IniRead($filename,"HorizPos","width11",""),IniRead($filename,"HorizPos","height11","")) If IniRead($filename,"HorizPos","layer12","") = 1 Then MoveEm("12",IniRead($filename,"HorizPos","xPos12",""),IniRead($filename,"HorizPos","yPos12",""),IniRead($filename,"HorizPos","width12",""),IniRead($filename,"HorizPos","height12","")) If IniRead($filename,"HorizPos","layer13","") = 1 Then MoveEm("13",IniRead($filename,"HorizPos","xPos13",""),IniRead($filename,"HorizPos","yPos13",""),IniRead($filename,"HorizPos","width13",""),IniRead($filename,"HorizPos","height13","")) If IniRead($filename,"HorizPos","layer14","") = 1 Then MoveEm("14",IniRead($filename,"HorizPos","xPos14",""),IniRead($filename,"HorizPos","yPos14",""),IniRead($filename,"HorizPos","width14",""),IniRead($filename,"HorizPos","height14","")) GUICtrlSetData($txtPrd11x,IniRead($filename,"HorizPos","xPos11","")) GUICtrlSetData($txtPrd11y,IniRead($filename,"HorizPos","yPos11","")) GUICtrlSetData($txtPrd11width,IniRead($filename,"HorizPos","width11","")) GUICtrlSetData($txtPrd11height,IniRead($filename,"HorizPos","height11","")) GUICtrlSetData($txtPrd11layer,IniRead($filename,"HorizPos","layer11","")) GUICtrlSetData($txtPrd12x,IniRead($filename,"HorizPos","xPos12","")) GUICtrlSetData($txtPrd12y,IniRead($filename,"HorizPos","yPos12","")) GUICtrlSetData($txtPrd12width,IniRead($filename,"HorizPos","width12","")) GUICtrlSetData($txtPrd12height,IniRead($filename,"HorizPos","height12","")) GUICtrlSetData($txtPrd12layer,IniRead($filename,"HorizPos","layer12","")) GUICtrlSetData($txtPrd13x,IniRead($filename,"HorizPos","xPos13","")) GUICtrlSetData($txtPrd13y,IniRead($filename,"HorizPos","yPos13","")) GUICtrlSetData($txtPrd13width,IniRead($filename,"HorizPos","width13","")) GUICtrlSetData($txtPrd13height,IniRead($filename,"HorizPos","height13","")) GUICtrlSetData($txtPrd13layer,IniRead($filename,"HorizPos","layer13","")) GUICtrlSetData($txtPrd14x,IniRead($filename,"HorizPos","xPos14","")) GUICtrlSetData($txtPrd14y,IniRead($filename,"HorizPos","yPos14","")) GUICtrlSetData($txtPrd14width,IniRead($filename,"HorizPos","width14","")) GUICtrlSetData($txtPrd14height,IniRead($filename,"HorizPos","height14","")) GUICtrlSetData($txtPrd14layer,IniRead($filename,"HorizPos","layer14","")) Case $msg = $btnMoveCust If IniRead($filename,"CustPos","layer11","") = 4 Then MoveEm("11",IniRead($filename,"CustPos","xPos11",""),IniRead($filename,"CustPos","yPos11",""),IniRead($filename,"CustPos","width11",""),IniRead($filename,"CustPos","height11","")) If IniRead($filename,"CustPos","layer12","") = 4 Then MoveEm("12",IniRead($filename,"CustPos","xPos12",""),IniRead($filename,"CustPos","yPos12",""),IniRead($filename,"CustPos","width12",""),IniRead($filename,"CustPos","height12","")) If IniRead($filename,"CustPos","layer13","") = 4 Then MoveEm("13",IniRead($filename,"CustPos","xPos13",""),IniRead($filename,"CustPos","yPos13",""),IniRead($filename,"CustPos","width13",""),IniRead($filename,"CustPos","height13","")) If IniRead($filename,"CustPos","layer14","") = 4 Then MoveEm("14",IniRead($filename,"CustPos","xPos14",""),IniRead($filename,"CustPos","yPos14",""),IniRead($filename,"CustPos","width14",""),IniRead($filename,"CustPos","height14","")) If IniRead($filename,"CustPos","layer11","") = 3 Then MoveEm("11",IniRead($filename,"CustPos","xPos11",""),IniRead($filename,"CustPos","yPos11",""),IniRead($filename,"CustPos","width11",""),IniRead($filename,"CustPos","height11","")) If IniRead($filename,"CustPos","layer12","") = 3 Then MoveEm("12",IniRead($filename,"CustPos","xPos12",""),IniRead($filename,"CustPos","yPos12",""),IniRead($filename,"CustPos","width12",""),IniRead($filename,"CustPos","height12","")) If IniRead($filename,"CustPos","layer13","") = 3 Then MoveEm("13",IniRead($filename,"CustPos","xPos13",""),IniRead($filename,"CustPos","yPos13",""),IniRead($filename,"CustPos","width13",""),IniRead($filename,"CustPos","height13","")) If IniRead($filename,"CustPos","layer14","") = 3 Then MoveEm("14",IniRead($filename,"CustPos","xPos14",""),IniRead($filename,"CustPos","yPos14",""),IniRead($filename,"CustPos","width14",""),IniRead($filename,"CustPos","height14","")) If IniRead($filename,"CustPos","layer11","") = 2 Then MoveEm("11",IniRead($filename,"CustPos","xPos11",""),IniRead($filename,"CustPos","yPos11",""),IniRead($filename,"CustPos","width11",""),IniRead($filename,"CustPos","height11","")) If IniRead($filename,"CustPos","layer12","") = 2 Then MoveEm("12",IniRead($filename,"CustPos","xPos12",""),IniRead($filename,"CustPos","yPos12",""),IniRead($filename,"CustPos","width12",""),IniRead($filename,"CustPos","height12","")) If IniRead($filename,"CustPos","layer13","") = 2 Then MoveEm("13",IniRead($filename,"CustPos","xPos13",""),IniRead($filename,"CustPos","yPos13",""),IniRead($filename,"CustPos","width13",""),IniRead($filename,"CustPos","height13","")) If IniRead($filename,"CustPos","layer14","") = 2 Then MoveEm("14",IniRead($filename,"CustPos","xPos14",""),IniRead($filename,"CustPos","yPos14",""),IniRead($filename,"CustPos","width14",""),IniRead($filename,"CustPos","height14","")) If IniRead($filename,"CustPos","layer11","") = 1 Then MoveEm("11",IniRead($filename,"CustPos","xPos11",""),IniRead($filename,"CustPos","yPos11",""),IniRead($filename,"CustPos","width11",""),IniRead($filename,"CustPos","height11","")) If IniRead($filename,"CustPos","layer12","") = 1 Then MoveEm("12",IniRead($filename,"CustPos","xPos12",""),IniRead($filename,"CustPos","yPos12",""),IniRead($filename,"CustPos","width12",""),IniRead($filename,"CustPos","height12","")) If IniRead($filename,"CustPos","layer13","") = 1 Then MoveEm("13",IniRead($filename,"CustPos","xPos13",""),IniRead($filename,"CustPos","yPos13",""),IniRead($filename,"CustPos","width13",""),IniRead($filename,"CustPos","height13","")) If IniRead($filename,"CustPos","layer14","") = 1 Then MoveEm("14",IniRead($filename,"CustPos","xPos14",""),IniRead($filename,"CustPos","yPos14",""),IniRead($filename,"CustPos","width14",""),IniRead($filename,"CustPos","height14","")) GUICtrlSetData($txtPrd11x,IniRead($filename,"CustPos","xPos11","")) GUICtrlSetData($txtPrd11y,IniRead($filename,"CustPos","yPos11","")) GUICtrlSetData($txtPrd11width,IniRead($filename,"CustPos","width11","")) GUICtrlSetData($txtPrd11height,IniRead($filename,"CustPos","height11","")) GUICtrlSetData($txtPrd11layer,IniRead($filename,"CustPos","layer11","")) GUICtrlSetData($txtPrd12x,IniRead($filename,"CustPos","xPos12","")) GUICtrlSetData($txtPrd12y,IniRead($filename,"CustPos","yPos12","")) GUICtrlSetData($txtPrd12width,IniRead($filename,"CustPos","width12","")) GUICtrlSetData($txtPrd12height,IniRead($filename,"CustPos","height12","")) GUICtrlSetData($txtPrd12layer,IniRead($filename,"CustPos","layer12","")) GUICtrlSetData($txtPrd13x,IniRead($filename,"CustPos","xPos13","")) GUICtrlSetData($txtPrd13y,IniRead($filename,"CustPos","yPos13","")) GUICtrlSetData($txtPrd13width,IniRead($filename,"CustPos","width13","")) GUICtrlSetData($txtPrd13height,IniRead($filename,"CustPos","height13","")) GUICtrlSetData($txtPrd13layer,IniRead($filename,"CustPos","layer13","")) GUICtrlSetData($txtPrd14x,IniRead($filename,"CustPos","xPos14","")) GUICtrlSetData($txtPrd14y,IniRead($filename,"CustPos","yPos14","")) GUICtrlSetData($txtPrd14width,IniRead($filename,"CustPos","width14","")) GUICtrlSetData($txtPrd14height,IniRead($filename,"CustPos","height14","")) GUICtrlSetData($txtPrd14layer,IniRead($filename,"CustPos","layer14","")) Case $msg = $btnHorizReset GUICtrlSetData($txtPrd11x,IniRead($filename,"ORIGHorizPos","xPos11","")) GUICtrlSetData($txtPrd11y,IniRead($filename,"ORIGHorizPos","yPos11","")) GUICtrlSetData($txtPrd11width,IniRead($filename,"ORIGHorizPos","width11","")) GUICtrlSetData($txtPrd11height,IniRead($filename,"ORIGHorizPos","height11","")) GUICtrlSetData($txtPrd11layer,IniRead($filename,"ORIGHorizPos","layer11","")) GUICtrlSetData($txtPrd12x,IniRead($filename,"ORIGHorizPos","xPos12","")) GUICtrlSetData($txtPrd12y,IniRead($filename,"ORIGHorizPos","yPos12","")) GUICtrlSetData($txtPrd12width,IniRead($filename,"ORIGHorizPos","width12","")) GUICtrlSetData($txtPrd12height,IniRead($filename,"ORIGHorizPos","height12","")) GUICtrlSetData($txtPrd12layer,IniRead($filename,"ORIGHorizPos","layer12","")) GUICtrlSetData($txtPrd13x,IniRead($filename,"ORIGHorizPos","xPos13","")) GUICtrlSetData($txtPrd13y,IniRead($filename,"ORIGHorizPos","yPos13","")) GUICtrlSetData($txtPrd13width,IniRead($filename,"ORIGHorizPos","width13","")) GUICtrlSetData($txtPrd13height,IniRead($filename,"ORIGHorizPos","height13","")) GUICtrlSetData($txtPrd13layer,IniRead($filename,"ORIGHorizPos","layer13","")) GUICtrlSetData($txtPrd14x,IniRead($filename,"ORIGHorizPos","xPos14","")) GUICtrlSetData($txtPrd14y,IniRead($filename,"ORIGHorizPos","yPos14","")) GUICtrlSetData($txtPrd14width,IniRead($filename,"ORIGHorizPos","width14","")) GUICtrlSetData($txtPrd14height,IniRead($filename,"ORIGHorizPos","height14","")) GUICtrlSetData($txtPrd14layer,IniRead($filename,"ORIGHorizPos","layer14","")) IniWrite($filename,"HorizPos","xPos11",GUICtrlRead($txtPrd11x)) IniWrite($filename,"HorizPos","yPos11",GUICtrlRead($txtPrd11y)) IniWrite($filename,"HorizPos","width11",GUICtrlRead($txtPrd11width)) IniWrite($filename,"HorizPos","height11",GUICtrlRead($txtPrd11height)) IniWrite($filename,"HorizPos","layer11",GUICtrlRead($txtPrd11layer)) IniWrite($filename,"HorizPos","xPos12",GUICtrlRead($txtPrd12x)) IniWrite($filename,"HorizPos","yPos12",GUICtrlRead($txtPrd12y)) IniWrite($filename,"HorizPos","width12",GUICtrlRead($txtPrd12width)) IniWrite($filename,"HorizPos","height12",GUICtrlRead($txtPrd12height)) IniWrite($filename,"HorizPos","layer12",GUICtrlRead($txtPrd12layer)) IniWrite($filename,"HorizPos","xPos13",GUICtrlRead($txtPrd13x)) IniWrite($filename,"HorizPos","yPos13",GUICtrlRead($txtPrd13y)) IniWrite($filename,"HorizPos","width13",GUICtrlRead($txtPrd13width)) IniWrite($filename,"HorizPos","height13",GUICtrlRead($txtPrd13height)) IniWrite($filename,"HorizPos","layer13",GUICtrlRead($txtPrd13layer)) IniWrite($filename,"HorizPos","xPos14",GUICtrlRead($txtPrd14x)) IniWrite($filename,"HorizPos","yPos14",GUICtrlRead($txtPrd14y)) IniWrite($filename,"HorizPos","width14",GUICtrlRead($txtPrd14width)) IniWrite($filename,"HorizPos","height14",GUICtrlRead($txtPrd14height)) IniWrite($filename,"HorizPos","layer14",GUICtrlRead($txtPrd14layer)) ToolTip("Reset!") Sleep(3000) ToolTip("") Case $msg = $btnVertReset GUICtrlSetData($txtPrd11x,IniRead($filename,"ORIGVertPos","xPos11","")) GUICtrlSetData($txtPrd11y,IniRead($filename,"ORIGVertPos","yPos11","")) GUICtrlSetData($txtPrd11width,IniRead($filename,"ORIGVertPos","width11","")) GUICtrlSetData($txtPrd11height,IniRead($filename,"ORIGVertPos","height11","")) GUICtrlSetData($txtPrd11layer,IniRead($filename,"ORIGVertPos","layer11","")) GUICtrlSetData($txtPrd12x,IniRead($filename,"ORIGVertPos","xPos12","")) GUICtrlSetData($txtPrd12y,IniRead($filename,"ORIGVertPos","yPos12","")) GUICtrlSetData($txtPrd12width,IniRead($filename,"ORIGVertPos","width12","")) GUICtrlSetData($txtPrd12height,IniRead($filename,"ORIGVertPos","height12","")) GUICtrlSetData($txtPrd12layer,IniRead($filename,"ORIGVertPos","layer12","")) GUICtrlSetData($txtPrd13x,IniRead($filename,"ORIGVertPos","xPos13","")) GUICtrlSetData($txtPrd13y,IniRead($filename,"ORIGVertPos","yPos13","")) GUICtrlSetData($txtPrd13width,IniRead($filename,"ORIGVertPos","width13","")) GUICtrlSetData($txtPrd13height,IniRead($filename,"ORIGVertPos","height13","")) GUICtrlSetData($txtPrd13layer,IniRead($filename,"ORIGVertPos","layer13","")) GUICtrlSetData($txtPrd14x,IniRead($filename,"ORIGVertPos","xPos14","")) GUICtrlSetData($txtPrd14y,IniRead($filename,"ORIGVertPos","yPos14","")) GUICtrlSetData($txtPrd14width,IniRead($filename,"ORIGVertPos","width14","")) GUICtrlSetData($txtPrd14height,IniRead($filename,"ORIGVertPos","height14","")) GUICtrlSetData($txtPrd14layer,IniRead($filename,"ORIGVertPos","layer14","")) IniWrite($filename,"VertPos","xPos11",GUICtrlRead($txtPrd11x)) IniWrite($filename,"VertPos","yPos11",GUICtrlRead($txtPrd11y)) IniWrite($filename,"VertPos","width11",GUICtrlRead($txtPrd11width)) IniWrite($filename,"VertPos","height11",GUICtrlRead($txtPrd11height)) IniWrite($filename,"VertPos","layer11",GUICtrlRead($txtPrd11layer)) IniWrite($filename,"VertPos","xPos12",GUICtrlRead($txtPrd12x)) IniWrite($filename,"VertPos","yPos12",GUICtrlRead($txtPrd12y)) IniWrite($filename,"VertPos","width12",GUICtrlRead($txtPrd12width)) IniWrite($filename,"VertPos","height12",GUICtrlRead($txtPrd12height)) IniWrite($filename,"VertPos","layer12",GUICtrlRead($txtPrd12layer)) IniWrite($filename,"VertPos","xPos13",GUICtrlRead($txtPrd13x)) IniWrite($filename,"VertPos","yPos13",GUICtrlRead($txtPrd13y)) IniWrite($filename,"VertPos","width13",GUICtrlRead($txtPrd13width)) IniWrite($filename,"VertPos","height13",GUICtrlRead($txtPrd13height)) IniWrite($filename,"VertPos","layer13",GUICtrlRead($txtPrd13layer)) IniWrite($filename,"VertPos","xPos14",GUICtrlRead($txtPrd14x)) IniWrite($filename,"VertPos","yPos14",GUICtrlRead($txtPrd14y)) IniWrite($filename,"VertPos","width14",GUICtrlRead($txtPrd14width)) IniWrite($filename,"VertPos","height14",GUICtrlRead($txtPrd14height)) IniWrite($filename,"VertPos","layer14",GUICtrlRead($txtPrd14layer)) ToolTip("Reset!") Sleep(3000) ToolTip("") Case $msg = $btnCustReset GUICtrlSetData($txtPrd11x,IniRead($filename,"CustPos","xPos11","")) GUICtrlSetData($txtPrd11y,IniRead($filename,"CustPos","yPos11","")) GUICtrlSetData($txtPrd11width,IniRead($filename,"CustPos","width11","")) GUICtrlSetData($txtPrd11height,IniRead($filename,"CustPos","height11","")) GUICtrlSetData($txtPrd11layer,IniRead($filename,"CustPos","layer11","")) GUICtrlSetData($txtPrd12x,IniRead($filename,"CustPos","xPos12","")) GUICtrlSetData($txtPrd12y,IniRead($filename,"CustPos","yPos12","")) GUICtrlSetData($txtPrd12width,IniRead($filename,"CustPos","width12","")) GUICtrlSetData($txtPrd12height,IniRead($filename,"CustPos","height12","")) GUICtrlSetData($txtPrd12layer,IniRead($filename,"CustPos","layer12","")) GUICtrlSetData($txtPrd13x,IniRead($filename,"CustPos","xPos13","")) GUICtrlSetData($txtPrd13y,IniRead($filename,"CustPos","yPos13","")) GUICtrlSetData($txtPrd13width,IniRead($filename,"CustPos","width13","")) GUICtrlSetData($txtPrd13height,IniRead($filename,"CustPos","height13","")) GUICtrlSetData($txtPrd13layer,IniRead($filename,"CustPos","layer13","")) GUICtrlSetData($txtPrd14x,IniRead($filename,"CustPos","xPos14","")) GUICtrlSetData($txtPrd14y,IniRead($filename,"CustPos","yPos14","")) GUICtrlSetData($txtPrd14width,IniRead($filename,"CustPos","width14","")) GUICtrlSetData($txtPrd14height,IniRead($filename,"CustPos","height14","")) GUICtrlSetData($txtPrd14layer,IniRead($filename,"CustPos","layer14","")) ToolTip("Reset!") Sleep(3000) ToolTip("") Case $msg = $btnPrd11values $size = WinGetPos("O","https://..../waitDetails?event=doLoad&target=EBSPRD1_EBSPRD11") GUICtrlSetData($txtPrd11x,$size[0]) GUICtrlSetData($txtPrd11y,$size[1]) GUICtrlSetData($txtPrd11width,$size[2]) GUICtrlSetData($txtPrd11height,$size[3]) GUICtrlSetData($txtPrd11layer,"") Case $msg = $btnPrd12values $size = WinGetPos("O","https://..../waitDetails?event=doLoad&target=EBSPRD1_EBSPRD12") GUICtrlSetData($txtPrd12x,$size[0]) GUICtrlSetData($txtPrd12y,$size[1]) GUICtrlSetData($txtPrd12width,$size[2]) GUICtrlSetData($txtPrd12height,$size[3]) GUICtrlSetData($txtPrd12layer,"") Case $msg = $btnPrd13values $size = WinGetPos("O","https://..../waitDetails?event=doLoad&target=EBSPRD1_EBSPRD13") GUICtrlSetData($txtPrd13x,$size[0]) GUICtrlSetData($txtPrd13y,$size[1]) GUICtrlSetData($txtPrd13width,$size[2]) GUICtrlSetData($txtPrd13height,$size[3]) GUICtrlSetData($txtPrd13layer,"") Case $msg = $btnPrd14values $size = WinGetPos("O","https://..../waitDetails?event=doLoad&target=EBSPRD1_EBSPRD14") GUICtrlSetData($txtPrd14x,$size[0]) GUICtrlSetData($txtPrd14y,$size[1]) GUICtrlSetData($txtPrd14width,$size[2]) GUICtrlSetData($txtPrd14height,$size[3]) GUICtrlSetData($txtPrd14layer,"") ; Case $msg = $btnSaveVert Case $msg = $btn1 ; i changed the button name out of desperation MsgBox(0,"prd11x",GUICtrlRead($txtPrd11x)) ; i added these to see what if any data was being saved MsgBox(0,"yPos11",GUICtrlRead($txtPrd11y)) ; i added these to see what if any data was being saved MsgBox(0,"width11",GUICtrlRead($txtPrd11width)) ; i added these to see what if any data was being saved MsgBox(0,"height11",GUICtrlRead($txtPrd11height)) ; i added these to see what if any data was being saved IniWrite($filename,"VertPos","xPos11",GUICtrlRead($txtPrd11x)) IniWrite($filename,"VertPos","yPos11",GUICtrlRead($txtPrd11y)) IniWrite($filename,"VertPos","width11",GUICtrlRead($txtPrd11width)) IniWrite($filename,"VertPos","height11",GUICtrlRead($txtPrd11height)) IniWrite($filename,"VertPos","layer11",GUICtrlRead($txtPrd11layer)) IniWrite($filename,"VertPos","xPos12",GUICtrlRead($txtPrd12x)) IniWrite($filename,"VertPos","yPos12",GUICtrlRead($txtPrd12y)) IniWrite($filename,"VertPos","width12",GUICtrlRead($txtPrd12width)) IniWrite($filename,"VertPos","height12",GUICtrlRead($txtPrd12height)) IniWrite($filename,"VertPos","layer12",GUICtrlRead($txtPrd12layer)) IniWrite($filename,"VertPos","xPos13",GUICtrlRead($txtPrd13x)) IniWrite($filename,"VertPos","yPos13",GUICtrlRead($txtPrd13y)) IniWrite($filename,"VertPos","width13",GUICtrlRead($txtPrd13width)) IniWrite($filename,"VertPos","height13",GUICtrlRead($txtPrd13height)) IniWrite($filename,"VertPos","layer13",GUICtrlRead($txtPrd13layer)) IniWrite($filename,"VertPos","xPos14",GUICtrlRead($txtPrd14x)) IniWrite($filename,"VertPos","yPos14",GUICtrlRead($txtPrd14y)) IniWrite($filename,"VertPos","width14",GUICtrlRead($txtPrd14width)) IniWrite($filename,"VertPos","height14",GUICtrlRead($txtPrd14height)) IniWrite($filename,"VertPos","layer14",GUICtrlRead($txtPrd14layer)) ; Case $msg = $btnSaveHoriz Case $msg = $btn2 ; i changed the button name out of desperation MsgBox(0,"prd11x",GUICtrlRead($txtPrd11x)) ; i added these to see what if any data was being saved MsgBox(0,"yPos11",GUICtrlRead($txtPrd11y)) ; i added these to see what if any data was being saved MsgBox(0,"width11",GUICtrlRead($txtPrd11width)) ; i added these to see what if any data was being saved MsgBox(0,"height11",GUICtrlRead($txtPrd11height)) ; i added these to see what if any data was being saved IniWrite($filename,"HorizPos","xPos11",GUICtrlRead($txtPrd11x)) IniWrite($filename,"HorizPos","yPos11",GUICtrlRead($txtPrd11y)) IniWrite($filename,"HorizPos","width11",GUICtrlRead($txtPrd11width)) IniWrite($filename,"HorizPos","height11",GUICtrlRead($txtPrd11height)) IniWrite($filename,"HorizPos","layer11",GUICtrlRead($txtPrd11layer)) IniWrite($filename,"HorizPos","xPos12",GUICtrlRead($txtPrd12x)) IniWrite($filename,"HorizPos","yPos12",GUICtrlRead($txtPrd12y)) IniWrite($filename,"HorizPos","width12",GUICtrlRead($txtPrd12width)) IniWrite($filename,"HorizPos","height12",GUICtrlRead($txtPrd12height)) IniWrite($filename,"HorizPos","layer12",GUICtrlRead($txtPrd12layer)) IniWrite($filename,"HorizPos","xPos13",GUICtrlRead($txtPrd13x)) IniWrite($filename,"HorizPos","yPos13",GUICtrlRead($txtPrd13y)) IniWrite($filename,"HorizPos","width13",GUICtrlRead($txtPrd13width)) IniWrite($filename,"HorizPos","height13",GUICtrlRead($txtPrd13height)) IniWrite($filename,"HorizPos","layer13",GUICtrlRead($txtPrd13layer)) IniWrite($filename,"HorizPos","xPos14",GUICtrlRead($txtPrd14x)) IniWrite($filename,"HorizPos","yPos14",GUICtrlRead($txtPrd14y)) IniWrite($filename,"HorizPos","width14",GUICtrlRead($txtPrd14width)) IniWrite($filename,"HorizPos","height14",GUICtrlRead($txtPrd14height)) IniWrite($filename,"HorizPos","layer14",GUICtrlRead($txtPrd14layer)) Case $msg = $btnSaveCust MsgBox(0,"prd11x",GUICtrlRead($txtPrd11x)) ; i added these to see what if any data was being saved MsgBox(0,"yPos11",GUICtrlRead($txtPrd11y)) ; i added these to see what if any data was being saved MsgBox(0,"width11",GUICtrlRead($txtPrd11width)) ; i added these to see what if any data was being saved MsgBox(0,"height11",GUICtrlRead($txtPrd11height)) ; i added these to see what if any data was being saved IniWrite($filename,"CustPos","xPos11",GUICtrlRead($txtPrd11x)) IniWrite($filename,"CustPos","yPos11",GUICtrlRead($txtPrd11y)) IniWrite($filename,"CustPos","width11",GUICtrlRead($txtPrd11width)) IniWrite($filename,"CustPos","height11",GUICtrlRead($txtPrd11height)) IniWrite($filename,"CustPos","layer11",GUICtrlRead($txtPrd11layer)) IniWrite($filename,"CustPos","xPos12",GUICtrlRead($txtPrd12x)) IniWrite($filename,"CustPos","yPos12",GUICtrlRead($txtPrd12y)) IniWrite($filename,"CustPos","width12",GUICtrlRead($txtPrd12width)) IniWrite($filename,"CustPos","height12",GUICtrlRead($txtPrd12height)) IniWrite($filename,"CustPos","layer12",GUICtrlRead($txtPrd12layer)) IniWrite($filename,"CustPos","xPos13",GUICtrlRead($txtPrd13x)) IniWrite($filename,"CustPos","yPos13",GUICtrlRead($txtPrd13y)) IniWrite($filename,"CustPos","width13",GUICtrlRead($txtPrd13width)) IniWrite($filename,"CustPos","height13",GUICtrlRead($txtPrd13height)) IniWrite($filename,"CustPos","layer13",GUICtrlRead($txtPrd13layer)) IniWrite($filename,"CustPos","xPos14",GUICtrlRead($txtPrd14x)) IniWrite($filename,"CustPos","yPos14",GUICtrlRead($txtPrd14y)) IniWrite($filename,"CustPos","width14",GUICtrlRead($txtPrd14width)) IniWrite($filename,"CustPos","height14",GUICtrlRead($txtPrd14height)) IniWrite($filename,"CustPos","layer14",GUICtrlRead($txtPrd14layer)) Case $msg = $btnHelp MsgBox(0,"nothing","no help for you (yet)",10) EndSelect Wend Func MoveEm($string,$x,$y,$width,$height) WinActivate("O","https://..../waitDetails?event=doLoad&target=EBSPRD1_EBSPRD" & $string) WinMove("O","https://..../waitDetails?event=doLoad&target=EBSPRD1_EBSPRD" & $string,$x,$y,$width,$height) EndFunc =====end OP wow, I am so ashamed ; p I apologize for the incomplete URLs, they are specific to my network and as I was about to post this I thought they might be priveleged information which could get me in a lot of trouble at work. BONUS QUESTION: you may have noticed in my code I say "top level cannot be obtained" because I am trying to get 4 windows to overlap in a particular order... is there a way to determine with AutoIt which window is on top, which is 2nd, 3rd, 4th? I could not find a way to do this -I don't NEED a solution, I am just curious. ; ) Thank you for your time. -Michael