xbennY0

Sorry...

Got it! You are the best! but i think this is not the best choice...is it possible put all this files in my .exe using the Resource UDF making it readable after? I'm sorry for so many questions

Interesting! how can i do this using the _FileListToArrayRec?

is it possible save a struct in autoit like c++ containing all data in one single file? or create multiple structs like: Local Const $Struct1 = "struct;" & _ "char var1[128];" & _ "byte var2;" & _ "uint var3;" & _ "char var4[128];" & _ "endstruct" Local $tSTRUCT1[50] = DllStructCreate($Struct1)

Because it is easier to find one single file than 3.000. Because it transfers the program to a computer faster(with these folders takes about 15 minutes to transfer 3MB).

what is this dummy control?

Wow!! worked!! nice man, can you explain what this does?

I created a small example explaining what i need: Example.au3 #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <date.au3> #include "vkConstants.au3" #include "HotKey.au3" #Region ### START Koda GUI section ### Form= $Form1 = GUICreate("Form1", 797, 600, -1, -1) $Tab1 = GUICtrlCreateTab(8, 0, 553, 353) $TabSheet1 = GUICtrlCreateTabItem("TabSheet1") $TabSheet2 = GUICtrlCreateTabItem("TabSheet2") GUICtrlSetState(-1,$GUI_SHOW) GUICtrlCreateTabItem("") $Button1 = GUICtrlCreateButton("create hotkeys(1)", 8, 500, 180, 30) $Label1 = GUICtrlCreateLabel("tab changes when the left and right keys are pressed(try)"&@CRLF&" [next step: create the hotkeys(1)]", 15, 360, 763, 80) GUICtrlSetFont(-1, 12, 800, 0, "MS Sans Serif") GUICtrlSetColor(-1, 0xFF0000) $Label2 = GUICtrlCreateLabel("hotkeys: disable", 72, 550, 196, 17) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit case $Button1 if guictrlread($button1) == "create hotkeys(1)" then _HotKeyAssign($VK_LEFT, "HotKeyPressed", BitOR($HK_FLAG_DEFAULT, $HK_FLAG_EXTENDEDCALL)) _HotKeyAssign($VK_RIGHT, "HotKeyPressed", BitOR($HK_FLAG_DEFAULT, $HK_FLAG_EXTENDEDCALL)) guictrlsetdata($label2, "hotkeys: enable") guictrlsetdata($label1, "this works but it blocks the hotkeys from other programs(try move the cursor using the left and right key somewhere [$edit ---->] )"&@CRLF&" [next step: create hotkeys(2)]") GUICtrlSetColor($label1, 0x4e00ff) $Edit1 = GUICtrlCreateEdit("", 592, 136, 185, 217) GUICtrlSetData(-1, StringFormat("dasdasda\r\ndas\r\ndsa\r\ndasdasdasdasdadasdas")) guictrlsetdata($button1, "create hotkeys(2)") Else _HotKeyRelease() _HotKeyAssign($VK_LEFT, "HotKeyPressed", BitOR($HK_FLAG_DEFAULT, $HK_FLAG_EXTENDEDCALL, $HK_FLAG_NOBLOCKHOTKEY)) _HotKeyAssign($VK_RIGHT, "HotKeyPressed", BitOR($HK_FLAG_DEFAULT, $HK_FLAG_EXTENDEDCALL, $HK_FLAG_NOBLOCKHOTKEY)) guictrlsetdata($label2, "hotkeys: enable") guictrlsetdata($label1, "and this solves the problem of blocking other programs but still changing the tabs...") GUICtrlSetColor($label1, 0xff00f6) guictrlsetdata($button1, "end") endif EndSwitch WEnd Func HotKeyPressed($iKey) Switch $iKey Case $VK_LEFT guictrlsetdata($label2, "left key pressed: "&_nowtime()&" msec:"&@msec) Case $VK_RIGHT guictrlsetdata($label2, "right key pressed: "&_nowtime()&" msec:"&@msec) EndSwitch EndFunc ;==>HotKeyPressed #includes: vkConstants.au3 Global Const $VK_LBUTTON = 0x01 Global Const $VK_RBUTTON = 0x02 Global Const $VK_CANCEL = 0x03 Global Const $VK_MBUTTON = 0x04 Global Const $VK_XBUTTON1 = 0x05 Global Const $VK_XBUTTON2 = 0x06 ; 0x07 - Undefined Global Const $VK_BACK = 0x08 Global Const $VK_TAB = 0x09 Global Const $VK_SHIFT = 0x10 ; 0x0A - 0x0B - Reserved Global Const $VK_CLEAR = 0x0C Global Const $VK_RETURN = 0x0D ; 0x0E - 0x0F - Undefined Global Const $VK_CONTROL = 0x11 Global Const $VK_MENU = 0x12 Global Const $VK_PAUSE = 0x13 Global Const $VK_CAPITAL = 0x14 ; 0x15 ; 0x16 - Undefined ; 0x17 ; 0x18 ; 0x19 ; 0x1A - Undefined Global Const $VK_ESCAPE = 0x1B ; 0x1C ; 0x1D ; 0x1E ; 0x1F Global Const $VK_SPACE = 0x20 Global Const $VK_PRIOR = 0x21 Global Const $VK_NEXT = 0x22 Global Const $VK_END = 0x23 Global Const $VK_HOME = 0x24 Global Const $VK_LEFT = 0x25 Global Const $VK_UP = 0x26 Global Const $VK_RIGHT = 0x27 Global Const $VK_DOWN = 0x28 Global Const $VK_SELECT = 0x29 Global Const $VK_PRINT = 0x2A Global Const $VK_EXECUTE = 0x2B Global Const $VK_SNAPSHOT = 0x2C Global Const $VK_INSERT = 0x2D Global Const $VK_DELETE = 0x2E Global Const $VK_HELP = 0x2F Global Const $VK_0 = 0x30 Global Const $VK_1 = 0x31 Global Const $VK_2 = 0x32 Global Const $VK_3 = 0x33 Global Const $VK_4 = 0x34 Global Const $VK_5 = 0x35 Global Const $VK_6 = 0x36 Global Const $VK_7 = 0x37 Global Const $VK_8 = 0x38 Global Const $VK_9 = 0x39 ; 0x3A - 0x40 - Undefined Global Const $VK_A = 0x41 Global Const $VK_B = 0x42 Global Const $VK_C = 0x43 Global Const $VK_D = 0x44 Global Const $VK_E = 0x45 Global Const $VK_F = 0x46 Global Const $VK_G = 0x47 Global Const $VK_H = 0x48 Global Const $VK_I = 0x49 Global Const $VK_J = 0x4A Global Const $VK_K = 0x4B Global Const $VK_L = 0x4C Global Const $VK_M = 0x4D Global Const $VK_N = 0x4E Global Const $VK_O = 0x4F Global Const $VK_P = 0x50 Global Const $VK_Q = 0x51 Global Const $VK_R = 0x52 Global Const $VK_S = 0x53 Global Const $VK_T = 0x54 Global Const $VK_U = 0x55 Global Const $VK_V = 0x56 Global Const $VK_W = 0x57 Global Const $VK_X = 0x58 Global Const $VK_Y = 0x59 Global Const $VK_Z = 0x5A Global Const $VK_LWIN = 0x5B Global Const $VK_RWIN = 0x5C ; 0x5E - Reserved Global Const $VK_APPS = 0x5D Global Const $VK_SLEEP = 0x5F Global Const $VK_NUMPAD0 = 0x60 Global Const $VK_NUMPAD1 = 0x61 Global Const $VK_NUMPAD2 = 0x62 Global Const $VK_NUMPAD3 = 0x63 Global Const $VK_NUMPAD4 = 0x64 Global Const $VK_NUMPAD5 = 0x65 Global Const $VK_NUMPAD6 = 0x66 Global Const $VK_NUMPAD7 = 0x67 Global Const $VK_NUMPAD8 = 0x68 Global Const $VK_NUMPAD9 = 0x69 Global Const $VK_MULTIPLY = 0x6A Global Const $VK_ADD = 0x6B Global Const $VK_SEPARATOR = 0x6C Global Const $VK_SUBTRACT = 0x6D Global Const $VK_DECIMAL = 0x6E Global Const $VK_DIVIDE = 0x6F Global Const $VK_F1 = 0x70 Global Const $VK_F2 = 0x71 Global Const $VK_F3 = 0x72 Global Const $VK_F4 = 0x73 Global Const $VK_F5 = 0x74 Global Const $VK_F6 = 0x75 Global Const $VK_F7 = 0x76 Global Const $VK_F8 = 0x77 Global Const $VK_F9 = 0x78 Global Const $VK_F10 = 0x79 Global Const $VK_F11 = 0x7A Global Const $VK_F12 = 0x7B Global Const $VK_F13 = 0x7C Global Const $VK_F14 = 0x7D Global Const $VK_F15 = 0x7E Global Const $VK_F16 = 0x7F Global Const $VK_F17 = 0x80 Global Const $VK_F18 = 0x81 Global Const $VK_F19 = 0x82 Global Const $VK_F20 = 0x83 Global Const $VK_F21 = 0x84 Global Const $VK_F22 = 0x85 Global Const $VK_F23 = 0x86 Global Const $VK_F24 = 0x87 ; 0x88 - 0x8F - Unassigned Global Const $VK_NUMLOCK = 0x90 Global Const $VK_SCROLL = 0x91 ; 0x92 - 0x96 - OEM specific ; 0x97 - 0x9F - Unassigned Global Const $VK_LSHIFT = 0xA0 Global Const $VK_RSHIFT = 0xA1 Global Const $VK_LCONTROL = 0xA2 Global Const $VK_RCONTROL = 0xA3 Global Const $VK_LMENU = 0xA4 Global Const $VK_RMENU = 0xA5 Global Const $VK_BROWSER_BACK = 0xA6 Global Const $VK_BROWSER_FORWARD = 0xA7 Global Const $VK_BROWSER_REFRESH = 0xA8 Global Const $VK_BROWSER_STOP = 0xA9 Global Const $VK_BROWSER_SEARCH = 0xAA Global Const $VK_BROWSER_FAVORITES = 0xAB Global Const $VK_BROWSER_HOME = 0xAC Global Const $VK_VOLUME_MUTE = 0xAD Global Const $VK_VOLUME_DOWN = 0xAE Global Const $VK_VOLUME_UP = 0xAF Global Const $VK_MEDIA_NEXT_TRACK = 0xB0 Global Const $VK_MEDIA_PREV_TRACK = 0xB1 Global Const $VK_MEDIA_STOP = 0xB2 Global Const $VK_MEDIA_PLAY_PAUSE = 0xB3 Global Const $VK_LAUNCH_MAIL = 0xB4 Global Const $VK_LAUNCH_MEDIA_SELECT = 0xB5 Global Const $VK_LAUNCH_APP1 = 0xB6 Global Const $VK_LAUNCH_APP2 = 0xB7 ; 0xB8 - 0xB9 - Reserved Global Const $VK_OEM_1 = 0xBA; ';:' Global Const $VK_OEM_PLUS = 0xBB; '=+' Global Const $VK_OEM_COMMA = 0xBC; ',<' Global Const $VK_OEM_MINUS = 0xBD; '-_' Global Const $VK_OEM_PERIOD = 0xBE; '.>' Global Const $VK_OEM_2 = 0xBF; '/?' Global Const $VK_OEM_3 = 0xC0; '`~' ; 0xC1 - 0xD7 - Reserved ; 0xD8 - 0xDA - Unassigned Global Const $VK_OEM_4 = 0xDB; '[{' Global Const $VK_OEM_5 = 0xDC; '\|' Global Const $VK_OEM_6 = 0xDD; ']}' Global Const $VK_OEM_7 = 0xDE; ''"' Global Const $VK_OEM_8 = 0xDF ; 0xE0 - Reserved ; 0xE1 - OEM specific Global Const $VK_OEM_102 = 0xE2 ; 0xE3 - 0xE4 - OEM specific ; 0xE5 ; 0xE6 - OEM specific ; 0xE7 ; 0xE8 - Unassigned ; 0xE9 - 0xF5 - OEM specific Global Const $VK_ATTN = 0xF6 Global Const $VK_CRSEL = 0xF7 Global Const $VK_EXSEL = 0xF8 Global Const $VK_EREOF = 0xF9 Global Const $VK_PLAY = 0xFA Global Const $VK_ZOOM = 0xFB Global Const $VK_NONAME = 0xFC Global Const $VK_PA1 = 0xFD Global Const $VK_OEM_CLEAR = 0xFE HotKey.au3 #cs Title: Management of Hotkeys UDF Library for AutoIt3 Filename: HotKey.au3 Description: Sets a hot key that calls a user function Author: Yashied Version: 1.6 Requirements: AutoIt v3.3 +, Developed/Tested on WindowsXP Pro Service Pack 2 Uses: StructureConstants.au3, WinAPI.au3, WindowsConstants.au3 Notes: The library registers the WM_ACTIVATE window message Available functions: _HotKeyAssign _HotKeyEnable _HotKeyDisable _HotKeyRelease Example1: #Include <HotKey.au3> Global Const $VK_ESCAPE = 0x1B Global Const $VK_F12 = 0x7B ; Assign "F12" with Message() and set extended function call _HotKeyAssign($VK_F12, 'Message', BitOR($HK_FLAG_DEFAULT, $HK_FLAG_EXTENDEDCALL)) ; Assign "CTRL-ESC" with Quit() _HotKeyAssign(BitOR($CK_CONTROL, $VK_ESCAPE), 'Quit') While 1 Sleep(10) WEnd Func Message($iKey) MsgBox(0, 'Hot key Test Message', 'F12 (0x' & Hex($iKey, 4) & ') has been pressed!') EndFunc ;==>Message Func Quit() Exit EndFunc ;==>Quit Example2: #Include <HotKey.au3> Global Const $VK_OEM_PLUS = 0xBB Global Const $VK_OEM_MINUS = 0xBD Global $Form, $Label Global $i = 0 $Form = GUICreate('MyGUI', 200, 200) $Label = GUICtrlCreateLabel($i, 20, 72, 160, 52, 0x01) GUICtrlSetFont(-1, 32, 400, 0, 'Tahoma') GUISetState() ; Assign "CTRL-(+)" with MyFunc1() and "CTRL-(-)" with MyFunc2() for created window only _HotKeyAssign(BitOR($CK_CONTROL, $VK_OEM_PLUS), 'MyFunc1', 0, $Form) _HotKeyAssign(BitOR($CK_CONTROL, $VK_OEM_MINUS), 'MyFunc2', 0, $Form) Do Until GUIGetMsg() = -3 Func MyFunc1() $i += 1 GUICtrlSetData($Label, $i) EndFunc ;==>MyFunc1 Func MyFunc2() $i -= 1 GUICtrlSetData($Label, $i) EndFunc ;==>MyFunc2 Example3: #Include <GUIConstants.au3> #Include <HotKey.au3> Global Const $VK_ESCAPE = 0x1B Global Const $VK_F12 = 0x7B ; Assign "F12" with Form() _HotKeyAssign($VK_F12, 'Form') ; Assign "CTRL-ESC" with Quit() _HotKeyAssign(BitOR($CK_CONTROL, $VK_ESCAPE), 'Quit') While 1 Sleep(10) WEnd Func Form() Local $Form, $Button, $Msg $Form = GUICreate('MyGUI', 350, 350, -1, -1, BitOR($WS_CAPTION, $WS_POPUP, $WS_SYSMENU), $WS_EX_TOPMOST) $Button = GUICtrlCreateButton('Exit', 140, 315, 70, 23) GUICtrlSetState(-1, BitOR($GUI_DEFBUTTON, $GUI_FOCUS)) GUISetState(@SW_SHOW, $Form) While 1 Switch GUIGetMsg() Case $Button, $GUI_EVENT_CLOSE ExitLoop EndSwitch WEnd GUIDelete($Form) EndFunc ;==>Form Func Quit() Exit EndFunc ;==>Quit #ce #Region Global Variables and Constants ; Flags. ; $HK_FLAG_NOBLOCKHOTKEY ; Prevents lock specified hot keys for other applications at the lower levels in the hook chain. For example, if you want to get just the fact ; of pressing a hot key, but leave the event to other applications. Ie specified hot key will work like before you set it. ; Only the _HotKeyAssign() function uses this flag. ; $HK_FLAG_NOUNHOOK ; Prevents an unhook application-defined hook procedure from the hook chain. It makes sense only if you want to keep order in the chain of hook ; procedures. For example, two applications have reserved the same hot keys and your application is not at the top in this chain. In this case, ; if the call _HotKeyDisable() without this flag and then call _HotKeyEnable(), then your application will receive priority over the re-defined ; hot keys. In some cases this is not required, then you must use this flag. ; This flag can be used by _HotKeyAssign() - unset hot keys only, _HotKeyDisable(), and _HotKeyRelease(). ; $HK_FLAG_NOOVERLAPCALL ; Prevents a call the user function if it has not complete. This flag is primarily to be set if the user function uses the MsgBox() and similar to it. ; Remember that your specified function is an interrupt function to the program and should not suspend the program or the program may hang. However, ; it is not recommended to use the MsgBox() inside your function, it is better to define the control flag which will test the main program loop. ; Only the _HotKeyAssign() function uses this flag. ; $HK_FLAG_NOREPEAT ; Prevents a repeat characters when you hold down a key. If this flag is set hotkey will only work once until you can not release. Used if needed to ; avoid repeated alarms keys, for example when you install the hot keys to increase, decrease, or mute the volume. ; Only the _HotKeyAssign() function uses this flag. ; $HK_FLAG_NOERROR ; Prevents a return of error if one of the functions from this library was called from user function which has been defined by the _HotKeyAssign(). ; Without this flag, in such cases will always return an error and @extended flag will be set to (-1). Be careful when using this flag, because ; improper use may cause a malfunction of your program, or to hang it. ; This flag can be used by _HotKeyAssign(), _HotKeyDisable(), and _HotKeyRelease(). ; $HK_FLAG_EXTENDEDCALL ; Adds a hot key code as a parameter when calling a user function. If you set this flag, 16-bit hot key code will be pass as a parameter to the user ; function. This can be useful if you assign multiple hot keys with the same function. If the flag was set, the function must have the header ; with one parameter (see _HotKeyAssign()). ; Only the _HotKeyAssign() function uses this flag. In most cases, this flag is not needed. ; $HK_FLAG_DEFAULT ; The combination of the $HK_FLAG_NOOVERLAPCALL and $HK_FLAG_NOREPEAT. Global Const $HK_FLAG_NOBLOCKHOTKEY = 0x01 Global Const $HK_FLAG_NOUNHOOK = 0x02 Global Const $HK_FLAG_NOOVERLAPCALL = 0x04 Global Const $HK_FLAG_NOREPEAT = 0x08 Global Const $HK_FLAG_NOERROR = 0x10 Global Const $HK_FLAG_EXTENDEDCALL = 0x40 Global Const $HK_FLAG_DEFAULT = BitOR($HK_FLAG_NOOVERLAPCALL, $HK_FLAG_NOREPEAT) ; System keys constants, see _HotKeyAssign() for more information. Global Const $CK_SHIFT = 0x0100 Global Const $CK_CONTROL = 0x0200 Global Const $CK_ALT = 0x0400 Global Const $CK_WIN = 0x0800 #EndRegion Global Variables and Constants #Region Local Variables and ConstantsExtended function call flag Global Const $HK_WM_ACTIVATE = 0x0006 Global Const $HK_WM_HOTKEY = _WinAPI_RegisterWindowMessage('WM_HOTKEY') ;~ Global $OnHotKeyExit = Opt('OnExitFunc', 'OnHotKeyExit') Global $OnHotKeyExit = OnAutoItExitRegister("OnHotKeyExit") Dim $hkTb[1][11] = [[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, GUICreate('')]] #cs DO NOT USE THIS ARRAY IN THE SCRIPT, INTERNAL USE ONLY! $hkTb[0][0 ] - Count item of array [0][1 ] - Interruption control flag (need to set this flag before changing $hkTb array) [0][2 ] - Last hot key pressed (16-bit) [0][3 ] - Disable hot keys control flag (_HotKeyDisable(), _HotKeyEnable()) [0][4 ] - Handle to the user-defined DLL callback function (returned by DllCallbackRegister()) [0][5 ] - Handle to the hook procedure (returned by _WinAPI_SetWindowsHookEx()) [0][6 ] - General counter of calls user functions [0][7 ] - Block hot key flag for last pressed ($hkTb[i][3]) [0][8 ] - Hold down control flag [0][9 ] - SCAW status (SHIFT-CTRL-ALT-WIN, 8-bit) [0][10] - Handle to "Hot" window $hkTb[i][0 ] - Combined hot key code (see _HotKeyAssign) [i][1 ] - User function name [i][2 ] - The title of the window to allow the hot key [i][3 ] - Block hot key flag [i][4 ] - Block overlapping user function flag [i][5 ] - Block repeat flag [i][6 ] - Extended function call flag [i][7 ] - Counter of calls user function [i][8-10] - Reserved #ce #EndRegion Local Variables and Constants #Region Initialization ; IMPORTANT! If you register the ACTIVATE window messages in your code, you should call handlers from this library until ; you return from your handlers, otherwise the hot key will not work properly. For example: ; ; Func MY_WM_ACTIVATE($hWnd, $iMsg, $wParam, $lParam) ; HK_WM_ACTIVATE($hWnd, $iMsg, $wParam, $lParam) ; ... ; EndFunc ;==>MY_WM_ACTIVATE GUIRegisterMsg($HK_WM_ACTIVATE, 'HK_WM_ACTIVATE') GUIRegisterMsg($HK_WM_HOTKEY, 'HK_WM_HOTKEY') #EndRegion Initialization #Region Public Functions ; #FUNCTION# ======================================================================================================================== ; Function Name: _HotKeyAssign ; Description: Sets a hot key that calls a user function. ; Syntax: _HotKeyAssign ( $iKey [, $sFunction [, $iFlags [, $sTitle]]] ) ; Parameter(s): $iKey - Combined 16-bit hot key code, which consists of upper and lower bytes. Value of bits shown in the following table. ; ; Hot key code bits: ; ; 0-7 - Specifies the virtual-key (VK) code of the key. Codes for the mouse buttons (0x01 - 0x06) are not supported. ; (http://msdn.microsoft.com/en-us/library/dd375731(VS.85).aspx) ; ; 8 - SHIFT key ; 9 - CONTROL key ; 10 - ALT key ; 11 - WIN key ; 12-15 - Don`t used (must be set to zero). ; ; The combination of keys can be composed of one function key (VK) and some system keys (CK). This code can not consist ; only of the system keys. To combine system keys with the function key use BitOR(). See following examples. ; (VK-constants are used in the vkConstants.au3) ; ; SHIFT-F12 - BitOR($CK_SHIFT, $VK_F12) ; SHIFT-A - BitOR($CK_SHIFT, $VK_A) ; CTRL-ALT-TAB - BitOR($CK_CONTROL, $CK_ALT, $VK_TAB) ; etc. ; ; Not acceptable combinations: ; ; SHIFT-WIN - BitOR($CK_SHIFT, $CK_WIN) ; CTRL-Q-W - BitOR($CK_CONTROL, $VK_Q, $VK_W) ; etc. ; ; Do not attempt to define as hot keys SHIFT, CONTROL, ALT, and WIN follows. ; ; $VK_SHIFT, $VK_LSHIFT, $VK_RSHIFT etc. ; ; It still will not work. These keys can not be defined as "hot" in this library. Also, there are no differences ; between left and right system keys. ; ; $sFunction - [optional] The name of the function to call when the key is pressed. The function cannot be a built-in AutoIt ; function or plug-in function and must have the following header: ; ; Func _MyFunc() ; ; Do not try to call _HotKeyAssign(), _HotKeyEnable(), _HotKeyDisable(), or _HotKeyRelease() from this function. This is ; not a good idea. In this cases the error will be returned. In doing so, @extended will be set to (-1). Do not use inside ; the function MsgBox() and any other functions of stopping the operation of your script. This may cause the script to hang. ; Your function should not introduce significant delays in the main script. Not specifying this parameter or set to zero ; will unset a previous hot key. If there are no designated hot keys, the hook procedure will be unhook from the hook chain. ; ; $iFlags - [optional] Hot key control flag(s). This parameter can be a combination of the following values. ; ; $HK_FLAG_NOBLOCKHOTKEY ; $HK_FLAG_NOUNHOOK ; $HK_FLAG_NOOVERLAPCALL ; $HK_FLAG_NOREPEAT ; $HK_FLAG_NOERROR ; $HK_FLAG_EXTENDEDCALL ; ; (See constants section in this library) ; ; $HK_FLAG_NOUNHOOK here is valid if you delete a hotkey only (_HotKeyAssign($iKey)). ; ; $HK_FLAG_EXTENDEDCALL it makes sense to set if you assign multiple hot keys with the same function. If the flag was set, ; the function must have following header: ; ; Func _MyFunc($Code) ; ; $sTitle - [optional] The title of the window to allow the hot key. This parameter is the same as the WinActive() function. ; The default is 0, which is allow hot key for all window. ; ; Return Value(s): Success: Returns 1. ; Failure: Returns 0 and sets the @error flag to non-zero. ; Author(s): Yashied ; Note(s): This function does not affect the _HotKeyEnable() and _HotKeyDisable() and can be called at any time. ;==================================================================================================================================== Func _HotKeyAssign($iKey, $sFunction = 0, $iFlags = -1, $sTitle = 0) If $iFlags < 0 Then $iFlags = $HK_FLAG_DEFAULT EndIf If (BitAND($iFlags, $HK_FLAG_NOERROR) = 0) And ($hkTb[0][6] > 0) Then Return SetError(1,-1, 0) EndIf Local $n = 0, $Redim = False, $Error = False If (Not IsString($sFunction)) And ($sFunction = 0) Then $sFunction = '' EndIf $sFunction = StringStripWS($sFunction, 3) $iKey = BitAND($iKey, 0x0FFF) If BitAND($iKey, 0x00FF) = 0 Then Return SetError(1, 0, 0) EndIf For $i = 1 To $hkTb[0][0] If $hkTb[$i][0] = $iKey Then $n = $i ExitLoop EndIf Next If $sFunction = '' Then If $n = 0 Then Return SetError(0, 0, 1) EndIf If (BitAND($iFlags, $HK_FLAG_NOUNHOOK) = 0) And (IsPtr($hkTb[0][5])) And ($hkTb[0][0] = 1) Then If Not _WinAPI_UnhookWindowsHookEx($hkTb[0][5]) Then Return SetError(1, 0, 0) EndIf DllCallbackFree($hkTb[0][4]) $hkTb[0][5] = 0 _HotKey_Reset() EndIf $hkTb[0][8] = 1 For $i = $n To $hkTb[0][0] - 1 For $j = 0 To UBound($hkTb, 2) - 1 $hkTb[$i][$j] = $hkTb[$i + 1][$j] Next Next ReDim $hkTb[$hkTb[0][0]][UBound($hkTb, 2)] $hkTb[0][0] -= 1 If $iKey = $hkTb[0][2] Then _HotKey_Reset() EndIf $hkTb[0][8] = 0 Else If $n = 0 Then If ($hkTb[0][5] = 0) And ($hkTb[0][3] = 0) Then $hkTb[0][4] = DllCallbackRegister('_HotKey_Hook', 'long', 'int;wparam;lparam') $hkTb[0][5] = _WinAPI_SetWindowsHookEx($WH_KEYBOARD_LL, DllCallbackGetPtr($hkTb[0][4]), _WinAPI_GetModuleHandle(0), 0) If (@error) Or ($hkTb[0][5] = 0) Then Return SetError(1, 0, 0) EndIf EndIf $n = $hkTb[0][0] + 1 ReDim $hkTb[$n + 1][UBound($hkTb, 2)] $Redim = 1 EndIf $hkTb[$n][0] = $iKey $hkTb[$n][1] = $sFunction $hkTb[$n][2] = $sTitle $hkTb[$n][3] = (BitAND($iFlags, $HK_FLAG_NOBLOCKHOTKEY) = $HK_FLAG_NOBLOCKHOTKEY) $hkTb[$n][4] = (BitAND($iFlags, $HK_FLAG_NOOVERLAPCALL) = $HK_FLAG_NOOVERLAPCALL) $hkTb[$n][5] = (BitAND($iFlags, $HK_FLAG_NOREPEAT) = $HK_FLAG_NOREPEAT) $hkTb[$n][6] = (BitAND($iFlags, $HK_FLAG_EXTENDEDCALL) = $HK_FLAG_EXTENDEDCALL) $hkTb[$n][7] = 0 If $Redim Then $hkTb[0][0] += 1 EndIf EndIf Return 1 EndFunc ;==>_HotKeyAssign ; #FUNCTION# ======================================================================================================================== ; Function Name: _HotKeyEnable ; Description: Enables all the hot keys that were defined by _HotKeyAssign() and installs a hook procedure into a hook chain. ; Syntax: _HotKeyEnable ( ) ; Parameter(s): None. ; Return Value(s): Success: Returns 1. ; Failure: Returns 0 and sets the @error flag to non-zero. Also, can be sets @extended flag to (-1). ; Author(s): Yashied ; Note(s): Do not call this function from user function which has been defined by the _HotKeyAssign(). This will always ; return an error and sets @extended flag to (-1). ;==================================================================================================================================== Func _HotKeyEnable() If $hkTb[0][6] > 0 Then Return SetError(1,-1, 0) EndIf If ($hkTb[0][5] = 0) And ($hkTb[0][0] > 0) Then $hkTb[0][4] = DllCallbackRegister('_HotKey_Hook', 'long', 'int;wparam;lparam') $hkTb[0][5] = _WinAPI_SetWindowsHookEx($WH_KEYBOARD_LL, DllCallbackGetPtr($hkTb[0][4]), _WinAPI_GetModuleHandle(0), 0) If (@error) Or ($hkTb[0][5] = 0) Then Return SetError(1, 0, 0) EndIf EndIf $hkTb[0][3] = 0 Return 1 EndFunc ;==>_HotKeyEnable ; #FUNCTION# ======================================================================================================================== ; Function Name: _HotKeyDisable ; Description: Disables all the hot keys that were defined by _HotKeyAssign() and unhooks a hook procedure from the hook chain. ; Syntax: _HotKeyDisable ( [$iFlags] ) ; Parameter(s): $iFlags - [optional] Hot key control flag(s). This parameter can be a combination of the following values. ; ; $HK_FLAG_NOUNHOOK ; $HK_FLAG_NOERROR ; ; (See constants section in this library) ; ; Return Value(s): Success: Returns 1. ; Failure: Returns 0 and sets the @error flag to non-zero. Also, can be sets @extended flag to (-1). ; Author(s): Yashied ; Note(s): Do not call this function from user function which has been defined by the _HotKeyAssign(). The function does not ; remove installed hot keys. ;==================================================================================================================================== Func _HotKeyDisable($iFlags = -1) If $iFlags < 0 Then $iFlags = 0 EndIf If (BitAND($iFlags, $HK_FLAG_NOERROR) = 0) And ($hkTb[0][6] > 0) Then Return SetError(1,-1, 0) EndIf If (BitAND($iFlags, $HK_FLAG_NOUNHOOK) = 0) And (IsPtr($hkTb[0][5])) Then If Not _WinAPI_UnhookWindowsHookEx($hkTb[0][5]) Then Return SetError(1, 0, 0) EndIf DllCallbackFree($hkTb[0][4]) $hkTb[0][5] = 0 EndIf $hkTb[0][3] = 1 _HotKey_Reset() Return 1 EndFunc ;==>_HotKeyDisable ; #FUNCTION# ======================================================================================================================== ; Function Name: _HotKeyRelease ; Description: Removes all the hot keys that were defined by _HotKeyAssign() and unhooks a hook procedure from the hook chain. ; Syntax: _HotKeyRelease ( [$iFlags] ) ; Parameter(s): $iFlags - [optional] Hot key control flag(s). This parameter can be a combination of the following values. ; ; $HK_FLAG_NOUNHOOK ; $HK_FLAG_NOERROR ; ; (See constants section in this library) ; ; Return Value(s): Success: Returns 1. ; Failure: Returns 0 and sets the @error flag to non-zero. Also, can be sets @extended flag to (-1). ; Author(s): Yashied ; Note(s): Do not call this function from user function which has been defined by the _HotKeyAssign(). ;==================================================================================================================================== Func _HotKeyRelease($iFlags = -1) If $iFlags < 0 Then $iFlags = 0 EndIf If (BitAND($iFlags, $HK_FLAG_NOERROR) = 0) And ($hkTb[0][6] > 0) Then Return SetError(1,-1, 0) EndIf If (BitAND($iFlags, $HK_FLAG_NOUNHOOK) = 0) And (IsPtr($hkTb[0][5])) Then If Not _WinAPI_UnhookWindowsHookEx($hkTb[0][5]) Then Return SetError(1, 0, 0) EndIf DllCallbackFree($hkTb[0][4]) $hkTb[0][5] = 0 _HotKey_Reset() EndIf $hkTb[0][0] = 0 ReDim $hkTb[1][UBound($hkTb, 2)] Return 1 EndFunc ;==>_HotKeyRelease #EndRegion Public Functions #Region Internal Functions Func _HotKey_Error($sMessage) $hkTb[0][3] = 1 _HotKey_Reset() _WinAPI_ShowError($sMessage) EndFunc ;==>_HotKey_Error Func _HotKey_Hook($iCode, $wParam, $lParam) If ($iCode > -1) And ($hkTb[0][1] = 0) And ($hkTb[0][3] = 0) Then Local $vkCode = DllStructGetData(DllStructCreate($tagKBDLLHOOKSTRUCT, $lParam), 'vkCode') Local $Call = False, $Return = False Switch $wParam Case $WM_KEYDOWN, $WM_SYSKEYDOWN If $hkTb[0][8] = 1 Then Return -1 EndIf Switch $vkCode Case 0xA0 To 0xA5, 0x5B, 0x5C Switch $vkCode Case 0xA0, 0xA1 $hkTb[0][9] = BitOR($hkTb[0][9], 0x01) Case 0xA2, 0xA3 $hkTb[0][9] = BitOR($hkTb[0][9], 0x02) Case 0xA4, 0xA5 $hkTb[0][9] = BitOR($hkTb[0][9], 0x04) Case 0x5B, 0x5C $hkTb[0][9] = BitOR($hkTb[0][9], 0x08) EndSwitch If $hkTb[0][2] > 0 Then $hkTb[0][2] = 0 EndIf Case Else Local $Key = BitOR(BitShift($hkTb[0][9], -8), $vkCode) If ($hkTb[0][2] = 0) Or ($hkTb[0][2] = $Key) Then For $i = 1 To $hkTb[0][0] If (_HotKey_WinActive($hkTb[$i][2])) And ($hkTb[$i][0] = $Key) Then If $hkTb[0][2] = $hkTb[$i][0] Then If $hkTb[$i][5] = 0 Then $Call = 1 EndIf Else $hkTb[0][2] = $hkTb[$i][0] $hkTb[0][7] = $hkTb[$i][3] $Call = 1 EndIf If $hkTb[$i][3] = 0 Then $Return = 1 EndIf If $Call Then If ($hkTb[$i][4] = 0) Or ($hkTb[$i][7] = 0) Then _WinAPI_PostMessage($hkTb[0][10], $HK_WM_HOTKEY, $i, 0xAFAF) EndIf EndIf ExitLoop EndIf Next Else $Return = 1 EndIf EndSwitch If $Return Then Return -1 EndIf Case $WM_KEYUP, $WM_SYSKEYUP Switch $vkCode Case 0xA0 To 0xA5, 0x5B, 0x5C Switch $vkCode Case 0xA0, 0xA1 $hkTb[0][9] = BitAND($hkTb[0][9], 0xFE) Case 0xA2, 0xA3 $hkTb[0][9] = BitAND($hkTb[0][9], 0xFD) Case 0xA4, 0xA5 $hkTb[0][9] = BitAND($hkTb[0][9], 0xFB) Case 0x5B, 0x5C $hkTb[0][9] = BitAND($hkTb[0][9], 0xF7) EndSwitch If ($hkTb[0][2] > 0) And ($hkTb[0][7] = 0) And ($hkTb[0][9] = 0) Then $hkTb[0][1] = 1 _HotKey_KeyUp($vkCode) $hkTb[0][1] = 0 Return -1 EndIf Case BitAND($hkTb[0][2], 0x00FF) $hkTb[0][2] = 0 Case Else EndSwitch EndSwitch EndIf Return _WinAPI_CallNextHookEx($hkTb[0][5], $iCode, $wParam, $lParam) EndFunc ;==>_HotKey_Hook Func _HotKey_KeyUp($vkCode) DllCall('user32.dll', 'int', 'keybd_event', 'int', 0x88, 'int', 0, 'int', 0, 'ptr', 0) DllCall('user32.dll', 'int', 'keybd_event', 'int', $vkCode, 'int', 0, 'int', 2, 'ptr', 0) DllCall('user32.dll', 'int', 'keybd_event', 'int', 0x88, 'int', 0, 'int', 2, 'ptr', 0) EndFunc ;==>_HotKey_KeyUp Func _HotKey_Reset() $hkTb[0][2] = 0 $hkTb[0][7] = 0 $hkTb[0][9] = 0 EndFunc ;==>_HotKey_Reset Func _HotKey_WinActive($hWnd) If (IsInt($hWnd)) And ($hWnd = 0) Then Return 1 Else If WinActive($hWnd) Then Return 1 EndIf EndIf Return 0 EndFunc ;==>_HotKey_WinActive #EndRegion Internal Functions #Region Windows Message Functions Func HK_WM_ACTIVATE($hWnd, $iMsg, $wParam, $lParam) Return 'GUI_RUNDEFMSG' EndFunc ;==>HK_WM_ACTIVATE Func HK_WM_HOTKEY($hWnd, $iMsg, $wParam, $lParam) Switch $hWnd Case $hkTb[0][10] Switch $lParam Case 0xAFAF $hkTb[0][6] += 1 $hkTb[$wParam][7] += 1 If $hkTb[$wParam][6] = 1 Then Call($hkTb[$wParam][1], $hkTb[$wParam][0]) Else Call($hkTb[$wParam][1]) EndIf $hkTb[$wParam][7] -= 1 $hkTb[0][6] -= 1 ; If (@error = 0xDEAD) And (@extended = 0xBEEF) Then ; _HotKey_Error($hkTb[$wParam][1] & '(): Function does not exist or invalid number of parameters.') ; EndIf EndSwitch EndSwitch EndFunc ;==>HK_WM_HOTKEY #EndRegion Windows Message Functions #Region OnAutoItExit Func OnHotKeyExit() _WinAPI_UnhookWindowsHookEx($hkTb[0][5]) DllCallbackFree($hkTb[0][4]) Call($OnHotKeyExit) EndFunc ;==>OnHotKeyExit #EndRegion OnAutoItExit thanks!

How can i block the {LEFT} and {RIGHT} hotkeys from my Tab control? i'm trying to use the {LEFT} button as hotkey(using the HotKey UDF) but it changes the tab in my program(i don't want to disable the hotkeys from other programs only from the tab control). thx.

Hm....but how i will be able to read this single file? is it possible put this contents(in the single file) in a struct to organize them? Can you make a simple example? thx again!

of course i know... I would save it in a .bin to read it later, exactly the example that I gave in c++ the idea is to merge everything into one file(as a binary for example) excluding the folders. Do this in c++ is easy i don't know here in autoit... thanks for your help bro!

but I do not want to work with the folders!! I want them as structs

up

Yes! How? this is a good idea?

Nice idea bro! thanks a lot!

but I want something to remove these folders! I don't want to use them... like make a binary file with everything inside, you see?

Woww!! Thx bro! then I want to save the struct in a binary file for easier reading(to not need to use the folders) can you make a simple example?? best regards.

Hey... i was mistaken it doesn't work!

For example... I have 100 folders and each of these folders have another 50 folders within, within those 5000 folders (100 folders * 50 in each one) there are 20 .txt files containing some text. Something like this: ...folder 1: - sub folder[1-1]: - data[1].txt - [...] - data[20].txt - [...] - [...] - sub folder[1-50]: - data[1].txt - [...] - data[20].txt ------------------------------------------------------------------------ ...folder 2: - sub folder[2-1]: - data[1].txt - [...] - data[20].txt - [...] - [...] - sub folder[2-50]: - data[1].txt - [...] - data[20].txt ------------------------------------------------------------------------ ...folder 3: - sub folder[3-1]: - data[1].txt - [...] - data[20].txt - [...] - [...] - sub folder[3-50]: - data[1].txt - [...] - data[20].txt ------------------------------------------------------------------------ ...[...]: ------------------------------------------------------------------------ ...folder 100: - sub folder[100-1]: - data[1].txt - [...] - data[20].txt - [...] - [...] - sub folder[100-50]: - data[1].txt - [...] - data[20].txt I need to get all this information (including the name of the folders) and put into a struct! is it possible? thanks!

Is it possible to set data in a struct from a .bin file like in C? thx! example in C++: struct stAccount { stSocket Socket; short Status; char PacketBuffer[2048]; stDataBase DataBase; }; stAccount Client[5000]; void Request::Login(stAccount *n_Client) { p20D *Packet = (p20D*)&n_Client->PacketBuffer; FILE *hFile = NULL; char *TMP = new char[100]; sprintf(TMP, "DataBase\\Accounts\\%c\\%s.bin", GetFirstKey(Packet->Username), Packet->Username); SecureZeroMemory(&n_Client->DataBase, sizeof(stDataBase)); fopen_s(&hFile, TMP, "rb"); // read binary fread(&n_Client->DataBase, sizeof(stDataBase), 1, hFile); // "strcpy to struct" fclose(hFile); }

Seriously?

I had already done that and it worked. did not have any other way to do it better? Hm...i only need to interact with this two forms!

Is it possible to assign a HotKey to multiple forms? Example: _HotKeyAssign($VK_ESCAPE, "HotKeyPressed", BitOR($HK_FLAG_DEFAULT, $HK_FLAG_EXTENDEDCALL), $Form1+$Form2) I'm using this UDF: '?do=embed' frameborder='0' data-embedContent>> Thanks!

Is it possible put the hotkey in two forms? example: _HotKeyAssign($VK_ESCAPE, "HotKeyPressed", BitOR($HK_FLAG_DEFAULT, $HK_FLAG_EXTENDEDCALL), $Form1+$Form2) thanks

Sorry! but it have a solution?