Process Manager

[LiquidNitrogen 2]

Not Too Advanced but Useful.

expandcollapse popup

#include <Array.au3>
#include <GuiListView.au3>
#include <GuiMenu.au3>
#include <Process.au3>
#include <GUIConstants.au3>
#include <File.au3>
#include <StaticConstants.au3>
#include <EditConstants.au3>
#NoTrayIcon

Main()
SetPriority()

Func Main()
    GUIDelete()
    AutoItSetOption("ExpandVarStrings", 1)
    $Main = GUICreate("Process Manager", 200, 310, -1, -1)
    Global $ProcessList = GUICtrlCreateListView("", 0, 0, 200, 290)
;File Menu
    $FileMenu = GUICtrlCreateMenu("File")
    $FileNew = GUICtrlCreateMenuItem("New Process", $FileMenu)
    $Exit = GUICtrlCreateMenuItem("Exit", $FileMenu)
;Options Menu
$OptionsMenu = GUICtrlCreateMenu("Options")
$RestartExplorer = GUICtrlCreateMenuItem("Restart Explorer", $OptionsMenu)
$OpenNotepad = GUICtrlCreateMenuItem("Open Notepad", $OptionsMenu)
;Power Options(Sub Menu)
$PowerOptionsSub = GUICtrlCreateMenu("Power Options", $OptionsMenu)
  $PowerShutdown = GUICtrlCreateMenuItem("Shutdown", $PowerOptionsSub)
  $PowerReboot = GUICtrlCreateMenuItem("Reboot", $PowerOptionsSub)
  $PowerLogoff = GUICtrlCreateMenuItem("Log Off", $PowerOptionsSub)
;Help Menu
$HelpMenu = GUICtrlCreateMenu("Help")
$About = GUICtrlCreateMenuItem("About", $HelpMenu)
    $ContextMenu = GUICtrlCreateContextMenu($ProcessList)
    $ContextEndProcess = GUICtrlCreateMenuItem("End Process", $ContextMenu)
    $ContextSetPriority = GUICtrlCreateMenuItem("Set Priority", $ContextMenu)
$ContextMemInfo = GUICtrlCreateMenuItem("Memory Info", $ContextMenu)
;Display Array in ListView()
    Global $Process = ProcessList()
    _ArrayDelete($Process, 0)
    _ArrayDelete($Process, 0)
    _ArrayDelete($Process, 0)
    _GUICtrlListView_SetItemCount($ProcessList, $Process[0][0])
    _GUICtrlListView_InsertColumn($ProcessList, 0, "Process", 120, 2)
    _GUICtrlListView_InsertColumn($ProcessList, 1, "PID", 60, 2)
_GUICtrlListView_AddArray($ProcessList, $Process)
    GUISetState()
    While 1
        Switch GUIGetMsg()
            Case -3
                Exit
            Case $ContextEndProcess
                _GUICtrlListView_BeginUpdate($ProcessList)
                $sIndex = _GUICtrlListView_GetSelectionMark($ProcessList)
                $SelectedProcess = $Process[$sIndex][0]
                ProcessClose($SelectedProcess)
                _GUICtrlListView_EndUpdate($ProcessList)
                Main()
            Case $FileNew
                $file = InputBox("New Process", "Enter a Valid File/Process to Open.")
    If $file = "" Then
     Main()
    Else
    $RunCheck = Run($file)
    WinActivate($file)
    If $RunCheck = 0 Then
     MsgBox(16, "Error!", 'Process Manager Cannot Find "$file$". Make Sure That File Exists and That You Have Type it In Correctly.')
     GUIDelete()
     Main()
    EndIf
    EndIf
            Case $ContextSetPriority
                SetPriority()
   Case $RestartExplorer
    ProcessClose("explorer.exe")
    ProcessWaitClose("explorer.exe")
    Run("explorer.exe")
    GUIDelete()
    Main()
   Case $OpenNotepad
    Run("notepad.exe")
    GUIDelete()
    Main()
   Case $PowerShutdown
    $Confirm = MsgBox(35, "Confirm Shutdown", "All Applications Will Close and The Computer Will Shutdown. Do You Want to Continue?")
    If $Confirm = 6 Then
    Shutdown(9)
    Exit
   EndIf
   Case $PowerReboot
    $Confirm = MsgBox(35, "Confirm Reboot", "All Applications Will Close and The Computer Will Reboot. Do You Want to Continue?")
    If $Confirm = 6 Then
    Shutdown(2)
    Exit
   EndIf
   Case $PowerLogoff
    $Confirm = MsgBox(35, "Confirm Log Off", "All Applications Will Close and The Current User Will be Logged Off. Do You Want to Continue?")
    If $Confirm = 6 Then
    Shutdown(0)
    Exit
   EndIf
  Case $ContextMemInfo
   MsgBox(0, "Not Finish", "Still Working on This!")
   ;$sIndex = _GUICtrlListView_GetSelectionMark($ProcessList)
   ;$MemInfo = ProcessGetStats($Process[$sIndex][0])
   ;MsgBox(0, "Memory Info", "Process: " &$Process[$sIndex][0] & @LF & @LF & "Working Set Size: " &$MemInfo & " KB" & @LF & "Peak Working Size: " &$MemInfo & " KB")
   Case $About
    MsgBox(0, "About Process Manager", "Process Manager"& @LF & @LF & "Version: 1.0" & @LF & "Created By: ReaperX")
            Case $Exit
                Exit
        EndSwitch
    WEnd
EndFunc

Func SetPriority()
    AutoItSetOption("ExpandVarStrings", 1)
    Global $ProcessList, $Process
    $wTitle = GUICreate("Set Priority", 180, 200, -1, -1)
    $sIndex = _GUICtrlListView_GetSelectionMark($ProcessList)
    $PID = $Process[$sIndex][1]
$PNAME = $Process[$sIndex][0]
    $sPriority = _ProcessGetPriority($PID)
    If $sPriority = -1 Then
  MsgBox(16, "Error!", 'The Current Priority for "$PNAME$" Couldnt Be Detected So it Cannot Be Changed.')
  GUIDelete()
  Main()
EndIf
;Display Current Priority in a Label for The Selected Process
If $sPriority = 0 Then $CurrentP = "Idle/Low"
    If $sPriority = 1 Then $CurrentP = "Below Normal"
    If $sPriority = 2 Then $CurrentP = "Normal"
    If $sPriority = 3 Then $CurrentP = "Above Normal"
    If $sPriority = 4 Then $CurrentP = "High"
    If $sPriority = 5 Then $CurrentP = "Realtime"
    $PriorityLabel = GUICtrlCreateLabel("Current Priority: " & $CurrentP, 30, 10)
    $SetTo0 = GUICtrlCreateRadio("Idle/Low", 50, 30, 150)
    If $sPriority = 0 Then GUICtrlSetState($SetTo0, $GUI_DISABLE)
    $SetTo1 = GUICtrlCreateRadio("Below Normal", 50, 50, 150)
    If $sPriority = 1 Then GUICtrlSetState($SetTo1, $GUI_DISABLE)
    $SetTo2 = GUICtrlCreateRadio("Normal", 50, 70, 150)
    If $sPriority = 2 Then GUICtrlSetState($SetTo2, $GUI_DISABLE)
    $SetTo3 = GUICtrlCreateRadio("Above Normal", 50, 90, 150)
    If $sPriority = 3 Then GUICtrlSetState($SetTo3, $GUI_DISABLE)
    $SetTo4 = GUICtrlCreateRadio("High", 50, 110, 150)
    If $sPriority = 4 Then GUICtrlSetState($SetTo4, $GUI_DISABLE)
    $SetTo5 = GUICtrlCreateRadio("Realtime", 50, 130, 150)
    If $sPriority = 5 Then GUICtrlSetState($SetTo5, $GUI_DISABLE)
    $ApplyButton = GUICtrlCreateButton("Apply", 30, 160, 50, 30)
$CancelButton = GUICtrlCreateButton("Cancel", 90, 160, 50, 30)

    GUISetState()
    While 1
        $Msg = GUIGetMsg()
        Switch $Msg
   Case $ApplyButton
    ;Check Which Radio Button Is Checked to Set the Priority Selected for
    ;Selected Process
                If BitAND(GUICtrlRead($SetTo0), $GUI_CHECKED) = $GUI_CHECKED Then
    ProcessSetPriority($PID, 0)
    MsgBox(0, $PNAME, "Priority Set to Idle/Low")
    GUIDelete()
    Main()
    EndIf
    If BitAND(GUICtrlRead($SetTo1), $GUI_CHECKED) = $GUI_CHECKED Then
    ProcessSetPriority($PID, 1)
    MsgBox(0, $PNAME, "Priority Set to Below Normal")
    GUIDelete()
    Main()
    EndIf
    If BitAND(GUICtrlRead($SetTo2), $GUI_CHECKED) = $GUI_CHECKED Then
    ProcessSetPriority($PID, 2)
    MsgBox(0, $PNAME, "Priority Set to Normal")
    GUIDelete()
    Main()
    EndIf
    If BitAND(GUICtrlRead($SetTo3), $GUI_CHECKED) = $GUI_CHECKED Then
    ProcessSetPriority($PID, 3)
    MsgBox(0, $PNAME, "Priority Set to Above Normal")
    GUIDelete()
    Main()
    EndIf
    If BitAND(GUICtrlRead($SetTo4), $GUI_CHECKED) = $GUI_CHECKED Then
    ProcessSetPriority($PID, 4)
    MsgBox(0, $PNAME, "Priority Set to High")
    GUIDelete()
    Main()
    EndIf
    If BitAND(GUICtrlRead($SetTo5), $GUI_CHECKED) = $GUI_CHECKED Then
    $Confirm = MsgBox(52, "Caution!", 'Setting a Process Priority to "Realtime" May Cause System Instability. Are You Sure You Want to Continue?')
    If $Confirm = 6 Then
    ProcessSetPriority($PID, 5)
    MsgBox(0, $PNAME, "Priority Set to Realtime")
    Main()
   EndIf
    If $Confirm = 7 Then
    GUIDelete()
    Main()
   EndIf
   EndIf
   Case $CancelButton
    GUIDelete()
    Main()
        EndSwitch
    WEnd
EndFunc

Edited January 15, 2012 by ReaperX