Jump to content
  1. Xandy

    Xandy

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By It_is_me_Me
      I am making some GUI with combobox for the Baudrates communications and I listed 9600, 57600, 115200. 
      I wrote the code to be defaulted to 57600 like this:
      GUICtrlSetData($comboBox_opticalBaudRate, "9600|57600|115200", "57600")
      But I wanted the GUI to remember the last item the user picks so the baudrates will NOT be defaulted to 57600.
      Example, I pick 9600 as my baudrates, then I close the GUI, after opening it, it always prompt 57600 since that is what I did in my code. But I want that if I choose 9600 and close the GUI, opening it again will show 9600 now instead of 57600.
      Is there a way to do it in GUI setting?
       
      Thanks.
    • By ashraful089
      #include <ButtonConstants.au3>
      #include <ComboConstants.au3>
      #include <GUIConstantsEx.au3>
      #include <WindowsConstants.au3>
      #Region ### START Koda GUI section ### Form=C:\Users\Engr. Ashraful\Videos\koda_1.7.3.0\Forms\ProgramPlayer\FormProgamToOpen.kxf
      $FormInput = GUICreate("Input", 302, 205, 454, 285)
      $Resolution = GUICtrlCreateCombo("Resolution", 80, 24, 145, 25)
      GUICtrlSetData(-1, "1920|VM1920|1366")
      $ComboProgramType = GUICtrlCreateCombo("Program Type Selection", 80, 64, 145, 25, BitOR($CBS_DROPDOWN,$CBS_AUTOHSCROLL))
      GUICtrlSetData(-1, "Multimedia|Official|Design|Web")
      $ButtonEnter = GUICtrlCreateButton("Enter", 104, 104, 75, 25)
      GUISetState(@SW_SHOW)
      #EndRegion ### END Koda GUI section ###
      While 1
          $nMsg = GUIGetMsg()
          Switch $nMsg
              Case $GUI_EVENT_CLOSE
                  Exit
          EndSwitch
      WEnd
       
      please help me to read combo box input and use the value for another function/ work
       
    • By Aapjuh
      Hi,
      I am having a problem properly saving the Width of a resizable Gui.
      When a user resizes the Gui it gets saved in an ini when the Gui closes to then restore the new Width upon reopening the app.
      with GUICreate("myGui",300,200,Default,Default,$WS_SIZEBOX)
      WinGetPos($hGUI) returns 314, and WinGetClientSize($hGUI) returns 298
      when its then saved in the ini the gui keeps expanding or shrinking every time its opened by +14 or -2
      I figure it has to do with borders etc, but i also guess borders depend on the window theme and whatnot or is user specific, so i can't just do $GuiWidth = $GetGuiWidth[arr] -14 or +2 right?

      is there a proper way of doing this?
      Thanks in advance,
      Aapjuh
    • By SonJoe
      Hi all,
      I have compiled a script to exe (using aut2exe) and delivered it to another machine, which does not have AutoIt installed. There, it does not run, but tells me that an undefined variable is used.
      I assume that the files referred to by #include are not embedded in the exe.
      How can I make sure the included files are available, when I deploy the exe to another machine?
      Thanks in advance for your helpful hints!
    • By It_is_me_Me
      I have provided a portion of my script (seen below) and I wanted to use what the USER will input into my IP address box and input box for TCP port. I set the IP address to use 0.0.0.0 as default and the Port to 502. But I want to let the user change it and when they click the buttons (IP Address and Port), the tooltip will show what the USER entered. How can I use the details that the User will input into my input box and IP address box and let them see what they entered when they click the buttons?
       
      Here are the scripts:
      ;-------------------------------------------------------------
      #include <ButtonConstants.au3>
      #include <ComboConstants.au3>
      #include <EditConstants.au3>
      #include <GUIConstantsEx.au3>
      #include <GuiIPAddress.au3>
      #include <StaticConstants.au3>
      #include <WindowsConstants.au3>
      #include <GuiEdit.au3>
      #include <MsgBoxConstants.au3>
      #include <Date.au3>
      #include <TabConstants.au3>
      #include <GuiTab.au3>

      Global $Form1 = GUICreate("Security Automation", 490, 339, -1, -1)
      ;MAIN Tab
      Global $TAB = GUICtrlCreateTab(0, 0, 489, 337)
      Global $tab_main = GUICtrlCreateTabItem("Main")
      $label_Title = GUICtrlCreateLabel("ETP-073 Security", 12, 33, 103, 17)
      GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
      ;-----------------TCP User input information-------------------------------------------------------------------------------
      $groupBox_TCP = GUICtrlCreateGroup("TCP", 12, 49, 289, 57, BitOR($GUI_SS_DEFAULT_GROUP,$BS_FLAT))
      ;TCP IP address
      Global $IPAddress1 = _GUICtrlIpAddress_Create($Form1, 20, 81, 170, 21)
      $Label_ipAddress = GUICtrlCreateLabel("Host IP Address", 20, 65, 80, 17)
      $userInputIP = _GUICtrlIpAddress_Set($IPAddress1, "0.0.0.0")
      ;TCP Port
      $label_tcpPort = GUICtrlCreateLabel("Port", 196, 65, 23, 17)
      Global $input_tcpPort = GUICtrlCreateInput("502", 196, 81, 57, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER))
      $userPort = GUICtrlRead($input_tcpPort)
      ;TCP Address
      $label_tcpAddress = GUICtrlCreateLabel("Addr.", 260, 65, 29, 17)
      Global $input_tcpDevAddress = GUICtrlCreateInput("1", 260, 81, 33, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER))
      ;Buttons
      Global $btn_userIP = GUICtrlCreateButton("User IP", 308, 297, 81, 25)
      Global $btn_Port = GUICtrlCreateButton("Port", 404, 297, 75, 25)
      ;Showing the GUI
      GUISetState(@SW_SHOW)
      While 1
         $nMsg = GUIGetMsg()
         Switch $nMsg
            Case $GUI_EVENT_CLOSE
               Exit
            Case $btn_userIP
               ToolTip($userInputIP)
            Case $btn_Port
               ToolTip($userPort)
         EndSwitch
      WEnd
      ;--------------end of script ------------------
       
      Note: There will be a "!->Includefile <WMDebug.au3> not found." Pay no attention to it.
×
×
  • Create New...