warfare55 Posted October 6, 2008 Share Posted October 6, 2008 (edited) I FINALLY GOT THE AUTO CLICKER, SCROLL DOWN IF YOU WANT IT, YOU CAN EDIT THE COORDINATES IF YOU FOLLOW THE STEPS!!! Edited October 7, 2008 by warfare55 Link to comment Share on other sites More sharing options...
Skrip Posted October 6, 2008 Share Posted October 6, 2008 You are probably going to want to look up some PHP email script...Also, I guess you can use http://www.spamyourenemies.com/index.php for more of a long term thing.. [left][sub]We're trapped in the belly of this horrible machine.[/sub][sup]And the machine is bleeding to death...[/sup][sup][/sup][/left] Link to comment Share on other sites More sharing options...
warfare55 Posted October 6, 2008 Author Share Posted October 6, 2008 (edited) i was kinda just looking for a auto clicker than will click "select all" pause "delete" over and over unless there is a way to "Wipe all" emails Edited October 6, 2008 by warfare55 Link to comment Share on other sites More sharing options...
Community On Patrol Posted October 6, 2008 Share Posted October 6, 2008 Hi warfare55,1st Welcome to the AutoIt Forums! Some of the following tips may not apply to you, but it may make your life a bit easier here on the forum in the future.CODEDid you know that we have an awesome search feature? You can find many answers to your current questions, just by typing in the right search patterns.A suggestion is to use the Advanced Search mode:Type your specific search term in quotes.Click the forum you want to search in (the one most likely to have your information would generally be the Example Script forum and or the General Help and Support Forum).Click on "Search titles only" radio button.Click perform search.The above will help you narrow down your searches and prevent you from unneccesarily posting a new thread.[*]Also, you should try to read the Sticky posts that are at the top of each of the AutoIt Forums you enter such as:FAQs (Frequently Asked Questions)Are my AutoIt EXEs really infected? (About false positives and what to do if you may encounter one)[*]Keep in mind, the help file will be your best friend, however you may find some of the tutorials written by some of our elite forum members helpful.Valuaters Interactive AutoIt 1-2-3 tutorialLxPs Learning to script with AutoIt3[*]Forum Etiquette:Making a new thread:Use the Search feature first to see if your question has already been answered.Look in the help file as well before even thinking of posting (When what you want could be obtained by simply reading the help file, you don't generally get a good response from your AutoIt community).Titles are very important here. 1 word titles or titles like "help me", "write something for me", "I'm a noob" etc... aren't tolerated.Make sure you are posting in the correct forum:General Help and Support:This forum is for AutoIt related support questions only. If you have a question related to another language, or nothing at all to do with AutoIt then you need to post in the chat forum, or in that languages perspective forum.Example Script:This forum is for AutoIt scripts/executables only.Source code is preferred but not necessary, you do have the right to just post the binary of your project if you wish.Please don't post questions in this forum unless it's directly related to a thread already existing.Use common sense when creating a new thread. Ask yourself if the title is descriptive enough to even interest someone (preferably those that know what they are talking about) to even look at your thread, let alone reply in it.Think about how it would show in the search feature if someone were to look for something just like you are looking for (think of the keywords you used yourself and obviously didn't find anything (because we know you used the search feature ) and use those types of keywords in your title as well).Thread content:Be descriptive with your query. (Make sure we actually know what you want to do).Show you've made an effort in coding what you want (provide the reproducer code (generally no more than 50 lines as people lose interest in debugging someones script for free)).Don't talk in ebonics. A lot of the forum members are adults, and a lot of them know how to help you, but talk like a child, you'll be treated as such.Don't ask for help making keyloggers, spam (even if it's to do as a prank), or anything that can be thought of as malicious. You'll more than likely have the thread locked by a moderator, and take a bashing from your fellow AutoIt community.When posting code, use code boxes. This can be accomplished by using [code ]<content here>[/code ] (No spaces between the brackets []).Using code boxes will keep the indentation and make it easier to read for others to help you.Bumping your threads:Use common courtesy here.Keep in mind every time you bump your thread to the top of the forum, you knock the other threads down a notch.Everyone posting for help has just as much right for their threads to get read as you do.Because of that, do not bump your post more than once in a 24 hour period.A Bump is simply posting in your thread with nothing that pertains to your query with the sole purpose of moving it up.Deleting previous bumps, and posting new ones is not tolerated, and the moderators can find those deletions, so do yourself a favor and don't cross that line .Rude or obnoxious content:This falls pretty much under the common sense thing. If you use it (common sense) before posting, you won't have issues.Don't use foul language, remember, a lot of the community is at work when they read these threads.Don't provoke or instigate an argument with someone.Double Posting:It's understood that sometimes there's a lag in the system, and sometimes people don't see their post go up right aways so they post again.If this happens to you, simply notify a moderator with the report feature in the post, and politely ask them to delete it.If you're just creating another topic because your original topic is not being answered the way you want or at all, this is not tolerated. You could lose your posting privileges all together over it.Non-English languagesIf English is not your primary language, please make an attempt to interpret (yourself or online) and post that interpretation.We have wonderful users from around the world, so after you've done your post in English, back it up with your question also in your native tongue (You may find your answer much quicker using both).That's it for now, I hope you have a wonderful learning experience, and hope to see you contribute to the community as your knowledge grows. Link to comment Share on other sites More sharing options...
warfare55 Posted October 6, 2008 Author Share Posted October 6, 2008 (edited) ----- Edited October 7, 2008 by warfare55 Link to comment Share on other sites More sharing options...
warfare55 Posted October 7, 2008 Author Share Posted October 7, 2008 BUMP Link to comment Share on other sites More sharing options...
ken82m Posted October 7, 2008 Share Posted October 7, 2008 You should be able to use au3record and just loop it. You can add a delay of however long you want.If you don't have SciTE download and install it here: http://www.autoitscript.com/cgi-bin/getfil...iTE4AutoIt3.exe(Select EDIT as the default action during setup.)1) Create a new autoit script2) Open it in SciTE3) Go to Tools and select AU3Recorder, check the all the boxes and hit record.This will let you record your specific sequence of movements and clicks.Go ahead and record the clicks and post the code I can help you from there.Kenny  "I believe that when we leave a place, part of it goes with us and part of us remains... Go anywhere, when it is quiet, and just listen.. After a while, you will hear the echoes of all our conversations, every thought and word we've exchanged.... Long after we are gone our voices will linger in these walls for as long as this place remains." Link to comment Share on other sites More sharing options...
warfare55 Posted October 7, 2008 Author Share Posted October 7, 2008 MouseMove(1526,66) MouseUp("left") MouseMove(854,235) MouseDown("left") MouseUp("left") MouseMove(812,759) MouseDown("left") MouseUp("left") MouseMove(1510,578) MouseDown("left") MouseUp("left") I Have The Coordinates, there were 4 clicks after all. I want the first one to click then a 2 second pause then the second one to click then another 2 second pause then the third one to click then a 3 minute pause then the forth one to click then a 9 minute pause then repeat. also which im not quite sure to do is to repeatably do Send("{SPACE}") so it presses space bar over and over during the 3 minute pause and the 9 minute pause. Link to comment Share on other sites More sharing options...
ken82m Posted October 7, 2008 Share Posted October 7, 2008 (edited) Ok try this, I obviously can't fully test it since I don't the have the app but it should work. I confirmed the space was being sent as desired -Kenny expandcollapse popup#include <Date.au3> ;You can hit F3 to end the loop and kill the script HotKeySet("{F3}", "Terminate") While 1 MouseMove(1526,66) MouseDown("left") Sleep(100) MouseUp("left") Sleep(2000) MouseMove(854,235) MouseDown("left") Sleep(100) MouseUp("left") Sleep(2000) MouseMove(812,759) MouseDown("left") Sleep(100) MouseUp("left") $StartDate = _NowCalc() Do Send("{SPACE}") ;short sleep so it doesn't take over your cpu, and give the app time to catch up Sleep(100) $Diff = _DateDiff('s', $StartDate, _NowCalc()) Until $Diff > 180 MouseMove(1510,578) MouseDown("left") Sleep(100) MouseUp("left") $StartDate = _NowCalc() Do Send("{SPACE}") ;short sleep so it doesn't take over your cpu, and give the app time to catch up Sleep(100) $Diff = _DateDiff('s', $StartDate, _NowCalc()) Until $Diff > 540 WEnd Func Terminate() Exit 0 EndFunc Edited October 7, 2008 by ken82m  "I believe that when we leave a place, part of it goes with us and part of us remains... Go anywhere, when it is quiet, and just listen.. After a while, you will hear the echoes of all our conversations, every thought and word we've exchanged.... Long after we are gone our voices will linger in these walls for as long as this place remains." Link to comment Share on other sites More sharing options...
AutoClick Posted July 3, 2009 Share Posted July 3, 2009 (edited) Auto Clicker Utility for EURO PAY Hi, We have developed Auto Clicker for Euro Pay. If you are already member of Europay want to automate your works. Contact us autoclickinfo@gmail.com for further clarification. If want customize your autoclick tasks visit us -LINK REMOVED- for further details. Thank you, AutoClick Edited July 3, 2009 by Jos Link to comment Share on other sites More sharing options...
bo8ster Posted July 3, 2009 Share Posted July 3, 2009 Are you going to post ur source or is this just a add? Post your code because code says more then your words can. SciTe Debug mode - it's magic: #AutoIt3Wrapper_run_debug_mode=Y. Use Opt("MustDeclareVars", 1)[topic="84960"]Brett F's Learning To Script with AutoIt V3[/topic][topic="21048"]Valuater's AutoIt 1-2-3, Class... is now in Session[/topic]Contribution: [topic="87994"]Get SVN Rev Number[/topic], [topic="93527"]Control Handle under mouse[/topic], [topic="91966"]A Presentation using AutoIt[/topic], [topic="112756"]Log ConsoleWrite output in Scite[/topic] Link to comment Share on other sites More sharing options...
AlmarM Posted July 3, 2009 Share Posted July 3, 2009 Arn't adds forbidden or the forums? Minesweeper A minesweeper game created in autoit, source available. _Mouse_UDF An UDF for registering functions to mouse events, made in pure autoit. 2D Hitbox Editor A 2D hitbox editor for quick creation of 2D sphere and rectangle hitboxes. Link to comment Share on other sites More sharing options...
bo8ster Posted July 3, 2009 Share Posted July 3, 2009 I have no idea but I know the mods don't like spam. On the provided link it says "Our software strictly working on licence basis. You have to get proper licence to use our software" and email for pricing - I say its the same thing. Also digging up an old thread for no good reason is just bad drills. Post your code because code says more then your words can. SciTe Debug mode - it's magic: #AutoIt3Wrapper_run_debug_mode=Y. Use Opt("MustDeclareVars", 1)[topic="84960"]Brett F's Learning To Script with AutoIt V3[/topic][topic="21048"]Valuater's AutoIt 1-2-3, Class... is now in Session[/topic]Contribution: [topic="87994"]Get SVN Rev Number[/topic], [topic="93527"]Control Handle under mouse[/topic], [topic="91966"]A Presentation using AutoIt[/topic], [topic="112756"]Log ConsoleWrite output in Scite[/topic] Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now