ZizioKriminal Posted October 7, 2008 Share Posted October 7, 2008 ..Hi to all! I've come back with another little question..: I have a mouse with two secondary buttons.. so I've tried to modify their function with a simple script like this..: CODE#include <GuiConstants.au3> #Include <Misc.au3> HotKeySet("{F3}", "Terminate") $dll = DllOpen("user32.dll") While 1 Sleep ( 250 ) If _IsPressed("04", $dll) Then Send("#{down}") ElseIf _IsPressed("05", $dll) Then Send("#{up}") EndIf WEnd DllClose($dll) Exit Func Terminate() Exit 0 EndFunc but I don't know what with number they coincides.. Maybe "04 - X1 mouse button" and "05 - X2 mouse button"..? Ty to all, and sorry for my english ...THA! IMMAKKRIMINALL! Link to comment Share on other sites More sharing options...
Community On Patrol Posted October 7, 2008 Share Posted October 7, 2008 Hi ZizioKriminal,1st Welcome to the AutoIt Forums! Some of the following tips may not apply to you, but it may make your life a bit easier here on the forum in the future.CODEDid you know that we have an awesome search feature? You can find many answers to your current questions, just by typing in the right search patterns.A suggestion is to use the Advanced Search mode:Type your specific search term in quotes.Click the forum you want to search in (the one most likely to have your information would generally be the Example Script forum and or the General Help and Support Forum).Click on "Search titles only" radio button.Click perform search.The above will help you narrow down your searches and prevent you from unneccesarily posting a new thread.[*]Also, you should try to read the Sticky posts that are at the top of each of the AutoIt Forums you enter such as:FAQs (Frequently Asked Questions)Are my AutoIt EXEs really infected? (About false positives and what to do if you may encounter one)[*]Keep in mind, the help file will be your best friend, however you may find some of the tutorials written by some of our elite forum members helpful.Valuaters Interactive AutoIt 1-2-3 tutorialLxPs Learning to script with AutoIt3[*]Forum Etiquette:Making a new thread:Use the Search feature first to see if your question has already been answered.Look in the help file as well before even thinking of posting (When what you want could be obtained by simply reading the help file, you don't generally get a good response from your AutoIt community).Titles are very important here. 1 word titles or titles like "help me", "write something for me", "I'm a noob" etc... aren't tolerated.Make sure you are posting in the correct forum:General Help and Support:This forum is for AutoIt related support questions only. If you have a question related to another language, or nothing at all to do with AutoIt then you need to post in the chat forum, or in that languages perspective forum.Example Script:This forum is for AutoIt scripts/executables only.Source code is preferred but not necessary, you do have the right to just post the binary of your project if you wish.Please don't post questions in this forum unless it's directly related to a thread already existing.Use common sense when creating a new thread. Ask yourself if the title is descriptive enough to even interest someone (preferably those that know what they are talking about) to even look at your thread, let alone reply in it.Think about how it would show in the search feature if someone were to look for something just like you are looking for (think of the keywords you used yourself and obviously didn't find anything (because we know you used the search feature ) and use those types of keywords in your title as well).Thread content:Be descriptive with your query. (Make sure we actually know what you want to do).Show you've made an effort in coding what you want (provide the reproducer code (generally no more than 50 lines as people lose interest in debugging someones script for free)).Don't talk in ebonics. A lot of the forum members are adults, and a lot of them know how to help you, but talk like a child, you'll be treated as such.Don't ask for help making keyloggers, spam (even if it's to do as a prank), or anything that can be thought of as malicious. You'll more than likely have the thread locked by a moderator, and take a bashing from your fellow AutoIt community.When posting code, use code boxes. This can be accomplished by using [code ]<content here>[/code ] (No spaces between the brackets []).Using code boxes will keep the indentation and make it easier to read for others to help you.Bumping your threads:Use common courtesy here.Keep in mind every time you bump your thread to the top of the forum, you knock the other threads down a notch.Everyone posting for help has just as much right for their threads to get read as you do.Because of that, do not bump your post more than once in a 24 hour period.A Bump is simply posting in your thread with nothing that pertains to your query with the sole purpose of moving it up.Deleting previous bumps, and posting new ones is not tolerated, and the moderators can find those deletions, so do yourself a favor and don't cross that line .Rude or obnoxious content:This falls pretty much under the common sense thing. If you use it (common sense) before posting, you won't have issues.Don't use foul language, remember, a lot of the community is at work when they read these threads.Don't provoke or instigate an argument with someone.Double Posting:It's understood that sometimes there's a lag in the system, and sometimes people don't see their post go up right aways so they post again.If this happens to you, simply notify a moderator with the report feature in the post, and politely ask them to delete it.If you're just creating another topic because your original topic is not being answered the way you want or at all, this is not tolerated. You could lose your posting privileges all together over it.Non-English languagesIf English is not your primary language, please make an attempt to interpret (yourself or online) and post that interpretation.We have wonderful users from around the world, so after you've done your post in English, back it up with your question also in your native tongue (You may find your answer much quicker using both).That's it for now, I hope you have a wonderful learning experience, and hope to see you contribute to the community as your knowledge grows. Link to comment Share on other sites More sharing options...
Moderators SmOke_N Posted October 7, 2008 Moderators Share Posted October 7, 2008 ..Hi to all! I've come back with another little question..: I have a mouse with two secondary buttons.. so I've tried to modify their function with a simple script like this..: CODE#include <GuiConstants.au3> #Include <Misc.au3> HotKeySet("{F3}", "Terminate") $dll = DllOpen("user32.dll") While 1 Sleep ( 250 ) If _IsPressed("04", $dll) Then Send("#{down}") ElseIf _IsPressed("05", $dll) Then Send("#{up}") EndIf WEnd DllClose($dll) Exit Func Terminate() Exit 0 EndFunc but I don't know what with number they coincides.. Maybe "04 - X1 mouse button" and "05 - X2 mouse button"..? Ty to all, and sorry for my english In the help file under the function you are using "_IsPressed", it has all the key codes:CODE01 Left mouse button 02 Right mouse button 04 Middle mouse button (three-button mouse) 05 Windows 2000/XP: X1 mouse button 06 Windows 2000/XP: X2 mouse button 08 BACKSPACE key 09 TAB key 0C CLEAR key 0D ENTER key 10 SHIFT key 11 CTRL key 12 ALT key 13 PAUSE key 14 CAPS LOCK key 1B ESC key 20 SPACEBAR 21 PAGE UP key 22 PAGE DOWN key 23 END key 24 HOME key 25 LEFT ARROW key 26 UP ARROW key 27 RIGHT ARROW key 28 DOWN ARROW key 29 SELECT key 2A PRINT key 2B EXECUTE key 2C PRINT SCREEN key 2D INS key 2E DEL key 30 0 key 31 1 key 32 2 key 33 3 key 34 4 key 35 5 key 36 6 key 37 7 key 38 8 key 39 9 key 41 A key 42 B key 43 C key 44 D key 45 E key 46 F key 47 G key 48 H key 49 I key 4A J key 4B K key 4C L key 4D M key 4E N key 4F O key 50 P key 51 Q key 52 R key 53 S key 54 T key 55 U key 56 V key 57 W key 58 X key 59 Y key 5A Z key 5B Left Windows key 5C Right Windows key 60 Numeric keypad 0 key 61 Numeric keypad 1 key 62 Numeric keypad 2 key 63 Numeric keypad 3 key 64 Numeric keypad 4 key 65 Numeric keypad 5 key 66 Numeric keypad 6 key 67 Numeric keypad 7 key 68 Numeric keypad 8 key 69 Numeric keypad 9 key 6A Multiply key 6B Add key 6C Separator key 6D Subtract key 6E Decimal key 6F Divide key 70 F1 key 71 F2 key 72 F3 key 73 F4 key 74 F5 key 75 F6 key 76 F7 key 77 F8 key 78 F9 key 79 F10 key 7A F11 key 7B F12 key 7C-7F F13 key - F16 key 80H-87H F17 key - F24 key 90 NUM LOCK key 91 SCROLL LOCK key A0 Left SHIFT key A1 Right SHIFT key A2 Left CONTROL key A3 Right CONTROL key A4 Left MENU key A5 Right MENU key BA ; BB = BC , BD - BE . BF / C0 ` DB [ DC \ DD ] Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer. Link to comment Share on other sites More sharing options...
ZizioKriminal Posted October 7, 2008 Author Share Posted October 7, 2008 In the help file under the function you are using "_IsPressed", it has all the key codes:CODE01 Left mouse button 02 Right mouse button 04 Middle mouse button (three-button mouse) 05 Windows 2000/XP: X1 mouse button 06 Windows 2000/XP: X2 mouse button 08 BACKSPACE key 09 TAB key 0C CLEAR key 0D ENTER key 10 SHIFT key 11 CTRL key 12 ALT key 13 PAUSE key 14 CAPS LOCK key 1B ESC key 20 SPACEBAR 21 PAGE UP key 22 PAGE DOWN key 23 END key 24 HOME key 25 LEFT ARROW key 26 UP ARROW key 27 RIGHT ARROW key 28 DOWN ARROW key 29 SELECT key 2A PRINT key 2B EXECUTE key 2C PRINT SCREEN key 2D INS key 2E DEL key 30 0 key 31 1 key 32 2 key 33 3 key 34 4 key 35 5 key 36 6 key 37 7 key 38 8 key 39 9 key 41 A key 42 B key 43 C key 44 D key 45 E key 46 F key 47 G key 48 H key 49 I key 4A J key 4B K key 4C L key 4D M key 4E N key 4F O key 50 P key 51 Q key 52 R key 53 S key 54 T key 55 U key 56 V key 57 W key 58 X key 59 Y key 5A Z key 5B Left Windows key 5C Right Windows key 60 Numeric keypad 0 key 61 Numeric keypad 1 key 62 Numeric keypad 2 key 63 Numeric keypad 3 key 64 Numeric keypad 4 key 65 Numeric keypad 5 key 66 Numeric keypad 6 key 67 Numeric keypad 7 key 68 Numeric keypad 8 key 69 Numeric keypad 9 key 6A Multiply key 6B Add key 6C Separator key 6D Subtract key 6E Decimal key 6F Divide key 70 F1 key 71 F2 key 72 F3 key 73 F4 key 74 F5 key 75 F6 key 76 F7 key 77 F8 key 78 F9 key 79 F10 key 7A F11 key 7B F12 key 7C-7F F13 key - F16 key 80H-87H F17 key - F24 key 90 NUM LOCK key 91 SCROLL LOCK key A0 Left SHIFT key A1 Right SHIFT key A2 Left CONTROL key A3 Right CONTROL key A4 Left MENU key A5 Right MENU key BA ; BB = BC , BD - BE . BF / C0 ` DB [ DC \ DD ] I see.. According to your table, I must use the KeyCode "05" and "06", right? But doesn't work.. any suggestion..? ...THA! IMMAKKRIMINALL! Link to comment Share on other sites More sharing options...
ZizioKriminal Posted October 8, 2008 Author Share Posted October 8, 2008 UP ...THA! IMMAKKRIMINALL! Link to comment Share on other sites More sharing options...
ZizioKriminal Posted October 9, 2008 Author Share Posted October 9, 2008 UP ..please! ...THA! IMMAKKRIMINALL! Link to comment Share on other sites More sharing options...
AdmiralAlkex Posted October 9, 2008 Share Posted October 9, 2008 My mouse can be controlled with "05", "06" without problems. Show us your script, there is probably something else .Some of my scripts: ShiftER, Codec-Control, Resolution switcher for HTC ShiftSome of my UDFs: SDL UDF, SetDefaultDllDirectories, Converting GDI+ Bitmap/Image to SDL Surface Link to comment Share on other sites More sharing options...
ZizioKriminal Posted October 11, 2008 Author Share Posted October 11, 2008 My mouse can be controlled with "05", "06" without problems. Show us your script, there is probably something else..This is the source:CODE#include <GuiConstants.au3>#Include <Misc.au3>HotKeySet("{F3}", "Terminate")$dll = DllOpen("user32.dll")While 1 Sleep ( 250 ) If _IsPressed("05", $dll) ThenSend("#{down}") ElseIf _IsPressed("06", $dll) ThenSend("#{up}") EndIfWEndDllClose($dll)ExitFunc Terminate() Exit 0EndFunc ...THA! IMMAKKRIMINALL! Link to comment Share on other sites More sharing options...
AdmiralAlkex Posted October 11, 2008 Share Posted October 11, 2008 @ZizioKriminal That works fine for my Microsoft IntelliMouse Optical 1.1A so I believe that it's either your mouse that is not sending the standard buttons or it's the software you are trying to use Send() on that doesn't respond to "#{up}". Try changing the Send() or your mouse so see where the fault is. .Some of my scripts: ShiftER, Codec-Control, Resolution switcher for HTC ShiftSome of my UDFs: SDL UDF, SetDefaultDllDirectories, Converting GDI+ Bitmap/Image to SDL Surface Link to comment Share on other sites More sharing options...
ZizioKriminal Posted October 12, 2008 Author Share Posted October 12, 2008 @ZizioKriminalThat works fine for my Microsoft IntelliMouse Optical 1.1A so I believe that it's either your mouse that is not sending the standard buttons or it's the software you are trying to use Send() on that doesn't respond to "#{up}".Try changing the Send() or your mouse so see where the fault is.Uhm.. I have a Nortek mouse, so I can't use the numbers "05" and "06"....Any alternatives? ...THA! IMMAKKRIMINALL! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now