grimmlock

I would suggest downloading psexec.exe (part of Microsoft PSTools package), and save the PSTools folder onto C:
The following lines will remotely map a drive to a network share, then wait 2 seconds, then remove the share. One thing I noticed is that on the remote PC the share shows up as "Disconnected" but I was still able to browse the share.
Hope this helps:

;~ The -s switch runs the command as system, the y: can be substituted for any letter, and if you switch the @SW_Hide to @SW_SHOW, you can see the output. Run(@ComSpec & ' /k C:\PSTools\psexec.exe -s \\remotecomputer net use y: \\networkshare /user:domain\user password', '', @SW_HIDE) Sleep(2000) Run(@ComSpec & ' /k C:\PSTools\psexec.exe -s \\remotecomputer -e net use y: /delete /y', '', @SW_HIDE)

Look at using the new #pragma directive for the version number assignment. Oh, and look at AutoIt3WrapperToPragma  (signature) to convert AutoItWrapper directives to pragma for you in one click.
#pragma

It's discussed in this thread and the one I linked on how to add an icon.

Hello everybody !

You want a source code for Wake On LAN without copyright ? It's here !

ENJOY !


$IPAddress = "192.168.1.255"; This is the broadcast address ! $MACAddress = "000D8787E226" UDPStartUp() $connexion = UDPOpen($IPAddress, 7) $res = UDPSend($connexion, GenerateMagicPacket($MACAddress)) MsgBox(0, "", $res) UDPCloseSocket($connexion) UDPShutdown() ; =================================================================== ; Functions ; =================================================================== ; This function convert a MAC Address Byte (e.g. "1f") to a char Func HexToChar($strHex) Return Chr(Dec($strHex)) EndFunc ; This function generate the "Magic Packet" Func GenerateMagicPacket($strMACAddress) $MagicPacket = "" $MACData = "" For $p = 1 To 11 Step 2 $MACData = $MACData & HexToChar(StringMid($strMACAddress, $p, 2)) Next For $p = 1 To 6 $MagicPacket = HexToChar("ff") & $MagicPacket Next For $p = 1 To 16 $MagicPacket = $MagicPacket & $MACData Next Return $MagicPacket EndFunc
Thanks for your remarks...

Next to see you !

Here are some suggestions


#include<guiconstants.au3> #include<File.au3> Global $goCommReturn[2] Global $goCommError = ObjEvent("AutoIt.Error", "CommError") ;put main script in main for easier delmination of global declations,registers, includes etc. ;DIM is not ideal. Use global for variables meant to be used ubiquitously, local for variables in a function. Add [localglobal] const for variables that do not change ;I prefer not using oneventmode so that nonstandard global variables are not required. and I think it is easier to debug cause/effect. ; put "&" on labels and buttons before their corresponding forms to make keyboard navigation easier. _main() Func _Main() while 1 _gui() WEnd EndFunc ;==>_Main Func _gui() Local $sUsername = @UserName ; User Name Local $sComputername = @ComputerName ; Computer Name Local $sTexts = ""; Output text for message box. Local $sText2 = ""; Output text for message box. Local $combo1 = ""; Output text for combo box. Local Const $sDomain = 'Acme.com' Local Const $sServer = "MailServerName" & '.' & $sDomain Local Const $sSupportEmail = "support" & '@' & $sDomain ClipPut($sServer) $sTexts = "Username = " & $sUsername & @CRLF ; The & character concentrates (joins) two values together. $sText2 = "Computer Name = " & $sComputername & @CRLF ; The &= adds to the variable. The same as doing $var = $var & "extra stuff" Local $hMainwindow = GUICreate("HelpDesk App", 300, 600) GUICtrlCreateLabel("Helpdesk App", 30, 10, 290, 40) GUICtrlSetFont(-1, 20, 800); bold GUICtrlCreateLabel($sTexts, 25, 60) GUICtrlCreateLabel($sText2, 25, 78) $hResetButton = GUICtrlCreateButton("&Reset", 115, 565, 80); *Commented Out; Would like to learn how to create a form and clear the data Local $hOkButton = GUICtrlCreateButton("&Send", 200, 565, 80) GUISetState(@SW_SHOW) ; _AddHorzSep(10, 40, 290) _AddHorzSep(10, 105, 280) _AddHorzSep(10, 210, 280) GUICtrlCreateLabel("*Please provide the above information when you contact the Help Desk for any hardware or software problems.", 20, 120, 250, 50) GUICtrlCreateLabel("Helpdesk #: (555) 555-5555", 85, 173) GUICtrlCreateLabel("&Helpdesk Email:", 70, 188) $hEmail = GUICtrlCreateLabel($sSupportEmail, 148, 188);helpdesk@domain.com" GUICtrlSetFont($hEmail, 8.5, -1, 4) ; underlined GUICtrlSetColor($hEmail, 0x0000ff) GUICtrlSetCursor($hEmail, 0) GUICtrlCreateLabel("Helpdesk Request Form", 30, 220, 270, 50) GUICtrlSetFont(-1, 15, 800); bold GUICtrlCreateLabel("&Request Type:", 25, 273, 75) Local $hCombo = GUICtrlCreateCombo("", 100, 270, 160) ; create first item GUICtrlSetData(-1, "Keyboard/Mouse|Monitor|Tower", "Keyboard/Mouse") ; add other item snd set a new default GUICtrlCreateLabel("Su&bject:", 25, 303, 75) Local $hInputText = GUICtrlCreateInput("", 100, 300, 160) GUICtrlCreateLabel("&Details:", 25, 330, 75) GUICtrlCreateInput("", 25, 345, 235, 200) While 1 Switch GUIGetMsg() Case $hOkButton $msg = GUICtrlRead($hInputText) & @CRLF & "----------------" & @CRLF & $sTexts & @CRLF & $sText2 & @CRLF & _wmigetcompinfo() OKButton($sServer, $sUsername, $sUsername & '@' & $sDomain, $sSupportEmail, "Issue:" & GUICtrlRead($hCombo), $msg) Case $hEmail OnEmail($sSupportEmail) case $hResetButton ExitLoop Case $GUI_EVENT_CLOSE Exit ;~ Send() EndSwitch WEnd EndFunc Func _AddHorzSep($iX, $iY, $iW) GUICtrlCreateLabel("", $iX, $iY, $iW, 1) GUICtrlSetBkColor(-1, 0x000000) EndFunc ;==>_AddHorzSep Func _wmigetcompinfo($strComputer = "localhost") ; Generated by AutoIt Scriptomatic November 30, 2012 $wbemFlagReturnImmediately = 0x10 $wbemFlagForwardOnly = 0x20 $colItems = "" $sOutput = "" $sOutput &= "Computer: " & $strComputer & @CRLF $sOutput &= "==========================================" & @CRLF $objWMIService = ObjGet("winmgmts:" & $strComputer & "rootCIMV2") $colItems = $objWMIService.ExecQuery("SELECT * FROM Win32_ComputerSystem", "WQL", _ $wbemFlagReturnImmediately + $wbemFlagForwardOnly) If IsObj($colItems) Then For $objItem In $colItems ;~ $sOutput &= "AdminPasswordStatus: " & $objItem.AdminPasswordStatus & @CRLF ;~ $sOutput &= "AutomaticResetBootOption: " & $objItem.AutomaticResetBootOption & @CRLF ;~ $sOutput &= "AutomaticResetCapability: " & $objItem.AutomaticResetCapability & @CRLF ;~ $sOutput &= "BootOptionOnLimit: " & $objItem.BootOptionOnLimit & @CRLF ;~ $sOutput &= "BootOptionOnWatchDog: " & $objItem.BootOptionOnWatchDog & @CRLF ;~ $sOutput &= "BootROMSupported: " & $objItem.BootROMSupported & @CRLF ;~ $sOutput &= "BootupState: " & $objItem.BootupState & @CRLF $sOutput &= "Caption: " & $objItem.Caption & @CRLF ;~ $sOutput &= "ChassisBootupState: " & $objItem.ChassisBootupState & @CRLF ;~ $sOutput &= "CreationClassName: " & $objItem.CreationClassName & @CRLF $sOutput &= "CurrentTimeZone: " & $objItem.CurrentTimeZone & @CRLF $sOutput &= "DaylightInEffect: " & $objItem.DaylightInEffect & @CRLF $sOutput &= "Description: " & $objItem.Description & @CRLF $sOutput &= "Domain: " & $objItem.Domain & @CRLF $sOutput &= "DomainRole: " & $objItem.DomainRole & @CRLF $sOutput &= "EnableDaylightSavingsTime: " & $objItem.EnableDaylightSavingsTime & @CRLF ;~ $sOutput &= "FrontPanelResetStatus: " & $objItem.FrontPanelResetStatus & @CRLF ;~ $sOutput &= "InfraredSupported: " & $objItem.InfraredSupported & @CRLF ;~ $strInitialLoadInfo = $objItem.InitialLoadInfo(0) ;~ $sOutput &= "InitialLoadInfo: " & $strInitialLoadInfo & @CRLF $sOutput &= "InstallDate: " & WMIDateStringToDate($objItem.InstallDate) & @CRLF ;~ $sOutput &= "KeyboardPasswordStatus: " & $objItem.KeyboardPasswordStatus & @CRLF $sOutput &= "LastLoadInfo: " & $objItem.LastLoadInfo & @CRLF $sOutput &= "Manufacturer: " & $objItem.Manufacturer & @CRLF $sOutput &= "Model: " & $objItem.Model & @CRLF $sOutput &= "Name: " & $objItem.Name & @CRLF $sOutput &= "NameFormat: " & $objItem.NameFormat & @CRLF $sOutput &= "NetworkServerModeEnabled: " & $objItem.NetworkServerModeEnabled & @CRLF ;~ $sOutput &= "NumberOfLogicalProcessors: " & $objItem.NumberOfLogicalProcessors & @CRLF ;~ $sOutput &= "NumberOfProcessors: " & $objItem.NumberOfProcessors & @CRLF ;~ $strOEMLogoBitmap = $objItem.OEMLogoBitmap(0) ;~ $sOutput &= "OEMLogoBitmap: " & $strOEMLogoBitmap & @CRLF $strOEMStringArray = $objItem.OEMStringArray(0) $sOutput &= "OEMStringArray: " & $strOEMStringArray & @CRLF $sOutput &= "PartOfDomain: " & $objItem.PartOfDomain & @CRLF ;~ $sOutput &= "PauseAfterReset: " & $objItem.PauseAfterReset & @CRLF ;~ $strPowerManagementCapabilities = $objItem.PowerManagementCapabilities(0) ;~ $sOutput &= "PowerManagementCapabilities: " & $strPowerManagementCapabilities & @CRLF ;~ $sOutput &= "PowerManagementSupported: " & $objItem.PowerManagementSupported & @CRLF ;~ $sOutput &= "PowerOnPasswordStatus: " & $objItem.PowerOnPasswordStatus & @CRLF ;~ $sOutput &= "PowerState: " & $objItem.PowerState & @CRLF ;~ $sOutput &= "PowerSupplyState: " & $objItem.PowerSupplyState & @CRLF ;~ $sOutput &= "PrimaryOwnerContact: " & $objItem.PrimaryOwnerContact & @CRLF ;~ $sOutput &= "PrimaryOwnerName: " & $objItem.PrimaryOwnerName & @CRLF ;~ $sOutput &= "ResetCapability: " & $objItem.ResetCapability & @CRLF ;~ $sOutput &= "ResetCount: " & $objItem.ResetCount & @CRLF ;~ $sOutput &= "ResetLimit: " & $objItem.ResetLimit & @CRLF ;~ $strRoles = $objItem.Roles(0) ;~ $sOutput &= "Roles: " & $strRoles & @CRLF ;~ $sOutput &= "Status: " & $objItem.Status & @CRLF ;~ $strSupportContactDescription = $objItem.SupportContactDescription(0) ;~ $sOutput &= "SupportContactDescription: " & $strSupportContactDescription & @CRLF ;~ $sOutput &= "SystemStartupDelay: " & $objItem.SystemStartupDelay & @CRLF ;~ $strSystemStartupOptions = $objItem.SystemStartupOptions(0) ;~ $sOutput &= "SystemStartupOptions: " & $strSystemStartupOptions & @CRLF ;~ $sOutput &= "SystemStartupSetting: " & $objItem.SystemStartupSetting & @CRLF $sOutput &= "SystemType: " & $objItem.SystemType & @CRLF $sOutput &= "ThermalState: " & $objItem.ThermalState & @CRLF $sOutput &= "TotalPhysicalMemory: " & $objItem.TotalPhysicalMemory & @CRLF ;~ $sOutput &= "UserName: " & $objItem.UserName & @CRLF ;~ $sOutput &= "WakeUpType: " & $objItem.WakeUpType & @CRLF ;~ $sOutput &= "Workgroup: " & $objItem.Workgroup & @CRLF Next Else Return ("WMI not functional") EndIf $colItems = $objWMIService.ExecQuery("SELECT * FROM Win32_ComputerSystemProduct", "WQL", _ $wbemFlagReturnImmediately + $wbemFlagForwardOnly) If IsObj($colItems) Then For $objItem In $colItems MsgBox(0,"","SerialNumber" & $objItem.IdentifyingNumber) $sOutput &= "SerialNumber: " & $objItem.IdentifyingNumber & @CRLF Next Return ($sOutput) EndIf EndFunc ;==>_wmigetcompinfo Func WMIDateStringToDate($dtmDate) Return (StringMid($dtmDate, 5, 2) & "/" & _ StringMid($dtmDate, 7, 2) & "/" & StringLeft($dtmDate, 4) _ & " " & StringMid($dtmDate, 9, 2) & ":" & StringMid($dtmDate, 11, 2) & ":" & StringMid($dtmDate, 13, 2)) EndFunc ;==>WMIDateStringToDate Func OKButton($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject, $s_Body) $rc = _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject, $s_Body) If @error Then MsgBox(0, "Error sending message", "Error code:" & @error & " Description:" & $rc) Else MsgBox(0, "HelpDesk App", "Your ticket has been submitted successfully") ;~ else EndIf EndFunc ;==>OKButton Func OnEmail($sSupportEmail) Run(@ComSpec & " /c " & 'start mailto:' & $sSupportEmail, "", @SW_HIDE) EndFunc ;==>OnEmail Func CLOSEClicked() ;Note: at this point @GUI_CTRLID would equal $GUI_EVENT_CLOSE, ;and @GUI_WINHANDLE would equal $hMainwindow Exit EndFunc ;==>CLOSEClicked ; ; The UDF Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $sBody = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance = "Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0) Local $objEmail = ObjCreate("CDO.Message") $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>' $objEmail.To = $s_ToAddress Local $i_Error = 0 Local $i_Error_desciption = "" If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress $objEmail.Subject = $s_Subject If StringInStr($sBody, "<") And StringInStr($sBody, ">") Then $objEmail.HTMLBody = $sBody Else $objEmail.Textbody = $sBody & @CRLF EndIf If $s_AttachFiles <> "" Then Local $S_Files2Attach = StringSplit($s_AttachFiles, ";") For $x = 1 To $S_Files2Attach[0] $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x]) ;~ ConsoleWrite('@@ Debug : $S_Files2Attach[$x] = ' & $S_Files2Attach[$x] & @LF & '>Error code: ' & @error & @LF) ;### Debug Console If FileExists($S_Files2Attach[$x]) Then ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF) $objEmail.AddAttachment($S_Files2Attach[$x]) Else ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF) SetError(1) Return 0 EndIf Next EndIf $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2 $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer If Number($IPPort) = 0 Then $IPPort = 25 $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort ;Authenticated SMTP If $s_Username <> "" Then $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password EndIf If $ssl Then $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True EndIf ;Update settings $objEmail.Configuration.Fields.Update ; Set Email Importance Switch $s_Importance Case "High" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "High" Case "Normal" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Normal" Case "Low" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Low" EndSwitch $objEmail.Fields.Update ; Sent the Message $objEmail.Send If @error Then SetError(2) Return $goCommReturn[1] EndIf $objEmail = "" EndFunc ;==>_INetSmtpMailCom ; ; ; Com Error Handler Func CommError() $HexNumber = Hex($goCommError.number, 8) $goCommReturn[0] = $HexNumber $goCommReturn[1] = StringStripWS($goCommError.description, 3) ConsoleWrite("### COM Error ! Number: " & $HexNumber & " ScriptLine: " & $goCommError.scriptline & " Description:" & $goCommReturn[1] & @LF) SetError(1); something to check for when this function returns Return EndFunc ;==>CommError

I would also suggest looking into a system to create serialized ticket #.

Ideally ticket systems would be tied into a database, so that backreferencing is easy and liability/ownership is easy to prove.