If...ElseIf...Else...EndIf Help

surreal · November 11, 2009

below is my code, i have at this time two process local backup $temp and network backup $temp2 are the locations, all in at this time c:temp.

i was going to try and add a restore from backup local backup $temp3, not created yet do to i found a problem with my code.

im going to try and explain this as best as posable, if you have any question please ask.

checkboxes if $GUI_CHECKED then do local or network or restore depending on whats checked. the code that i have provided will do local or network no matter if checkbox is checked or not.

#include <ButtonConstants.au3>
#include <ComboConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <File.au3>
#include <Array.au3>
#include <HKCUReg.au3>
#include <WinCopy.au3>

;===Checks Local OSVersion Create Var User Friendly================================================
$OS = @OSVersion
$OS = StringReplace($OS, "WIN_VISTA", "Windows Vista")
$OS = StringReplace($OS, "WIN_XP", "Windows XP")
$OS = StringReplace($OS, "WIN_2000", "Windows 2000")
;===Determines Documents Location According To OS++================================================
$OSDOC = @OSVersion
If $OSDOC = "WIN_VISTA" Then $DOC = "\Users\"
If $OSDOC = "WIN_XP" Then
    $DOC = "\Documents and Settings\"
EndIf
$OSDF = @OSVersion
If $OSDF = "WIN_VISTA" Then $DF = "Documents"
If $OSDF = "WIN_XP" Then
    $DF = "My Documents"
EndIf

Local $Temp = "\Migrate_Local\"
Local $Temp2 = "\Migrate_Network\"
Local $LogFile = "c:\Temp\LogFile.txt"
Local $Separator = "------------------------------"

;===GUI Start and File Menu========================================================================
$ParentWin = GUICreate("", 330, 165, -1, -1)

$FileMenu = GUICtrlCreateMenu("&File")
$BKItem = GUICtrlCreateMenuItem("Backup Only", $FileMenu)
$RSItem = GUICtrlCreateMenuItem("Restore Only", $FileMenu)
GUICtrlSetState($BKItem, $GUI_UNCHECKED)
GUICtrlSetState($RSItem, $GUI_UNCHECKED)
$ExitItem = GUICtrlCreateMenuItem("Exit", $FileMenu)
$ViewMenu = GUICtrlCreateMenu("&View")
$LogItem = GUICtrlCreateMenuItem("Log File", $ViewMenu)
$ProMenu = GUICtrlCreateMenu("&Programs")
$RDItem = GUICtrlCreateMenuItem("Remote Desktop", $ProMenu)
$CMItem = GUICtrlCreateMenuItem("Computer Management", $ProMenu)
$CPItem = GUICtrlCreateMenuItem("Command Prompt", $ProMenu)
$HelpMenu = GUICtrlCreateMenu("&Help")
$HelpItem = GUICtrlCreateMenuItem("Help", $HelpMenu)

;===GUI Network Computer To Tranfer From===========================================================
GUICtrlCreateGroup("System", 10, 10, 190, 75)
GUICtrlCreateLabel("Computer Name:", 20, 25)
$cnTarget = GUICtrlCreateInput(@ComputerName, 20, 40, 120, 20)
$cnMessage = GUICtrlCreateLabel("Enter computer name or ip address", 20, 64, 175, 15)
$cnButton = GUICtrlCreateButton("Connect", 145, 35, 50, 25, $WS_GROUP)

;===GUI Network User Profile=======================================================================
GUICtrlCreateGroup("Profile:", 10, 90, 190, 45)
$prCombo = GUICtrlCreateCombo("", 20, 105, 175, 20)

;===GUI Group What To Migrate======================================================================
GUICtrlCreateGroup("Tranfer", 210, 10, 110, 80)
$BoxDocs = GUICtrlCreateCheckbox("My Documents", 220, 25)
$BoxPrinter = GUICtrlCreateCheckbox("Network Printers", 220, 45)
$BoxLotus = GUICtrlCreateCheckbox("Lotus Notes", 220, 65)
GUICtrlSetState($BoxDocs, $GUI_CHECKED)
GUICtrlSetState($BoxPrinter, $GUI_CHECKED)

;===GUI Start Function=============================================================================
$StartButton = GUICtrlCreateButton("Start", 230, 100, 65, 30, $WS_GROUP)
GUISetState(@SW_SHOW)

;===Start Of GUIGetMsg=============================================================================
While 1
    $msg = GUIGetMsg()
    Select

        ;===Case For Exit GUI==============================================================================
        Case $msg = $ExitItem Or $msg = $GUI_EVENT_CLOSE
            $FormClose = MsgBox(36, "", "Are you sure you want to exit?")
            If $FormClose = 6 Then
                GUIDelete()
                Exit
            EndIf

            ;===Case For File Menu Items=======================================================================
        Case $msg = $BKItem
            If BitAND(GUICtrlRead($BKItem), $GUI_CHECKED) = $GUI_CHECKED Then
                GUICtrlSetState($BKItem, $GUI_UNCHECKED)
            Else
                GUICtrlSetState($BKItem, $GUI_CHECKED)
                Local $BKtarget = FileSelectFolder("Choose the location you want to back up to:", "")
                If $BKtarget = '' Then GUICtrlSetState($BKItem, $GUI_UNCHECKED)
            EndIf
        Case $msg = $RSItem
            If BitAND(GUICtrlRead($RSItem), $GUI_CHECKED) = $GUI_CHECKED Then
                GUICtrlSetState($RSItem, $GUI_UNCHECKED)
            Else
                GUICtrlSetState($RSItem, $GUI_CHECKED)
                Local $RStarget = FileSelectFolder("Choose the location you want to restore from:", "")
                If $RStarget = '' Then GUICtrlSetState($RSItem, $GUI_UNCHECKED)
            EndIf
        Case $msg = $HelpItem
            MsgBox(64, "", "Help File Coming Soon")
        Case $msg = $RDItem
            Run('mstsc.exe', @SystemDir)
        Case $msg = $CMItem
            ShellExecute('compmgmt.msc', @SystemDir, @SW_MAXIMIZE)
        Case $msg = $LogItem
            If FileExists($LogFile) Then
                ShellExecute($LogFile, "")
            Else
                MsgBox(48, "", "A Log File has not been created yet.")
            EndIf
        Case $msg = $CPItem
            Run('cmd.exe', @SystemDir)

            ;===Case For Lotus Notes CheckBox==================================================================
        Case $msg = $BoxLotus
            If GUICtrlRead($cnTarget) = '' Or GUICtrlRead($prCombo) = '' Then
                MsgBox(16, "", 'Target machine and a profile must be entered')
                GUICtrlSetState($BoxLotus, $GUI_UNCHECKED)
            EndIf

            If BitAND(GUICtrlRead($BoxLotus), $GUI_UNCHECKED) = $GUI_UNCHECKED Then
                GUICtrlSetState($BoxLotus, $GUI_UNCHECKED)
            Else
                Lotus()
                GUICtrlSetState($BoxLotus, $GUI_CHECKED)
            EndIf
            ;===Case For Connect===============================================================================
        Case $msg = $cnButton
            If GUICtrlRead($cnTarget) = '' Then
                GUICtrlSetData($cnMessage, 'Target machine must be entered')
                GUICtrlSetColor($cnMessage, 0xFF0000)
                ContinueLoop
            EndIf
            $Log = FileOpen($LogFile, 10)
            FileWriteLine($LogFile, "Started: " & @MON & "/" & @MDAY & "/" & @YEAR & " at " & @HOUR & ":" & @MIN & ":" & @SEC & @CRLF & @CRLF & "System Info" & @CRLF & $Separator & @CRLF)
            FileWriteLine($LogFile, "Operating System: " & $OS & @CRLF & "Computer Name: " & @ComputerName & @CRLF)
            FileClose($LogFile)
            Connect()

        Case $msg = $StartButton
            If GUICtrlRead($cnTarget) = '' Or GUICtrlRead($prCombo) = '' Then
                MsgBox(16, "", 'Target machine and a profile must be entered')
            Else
                StartButton()
            EndIf
    EndSelect
WEnd

;===Function For Remote System InfoBox=============================================================
Func Connect()
    SplashTextOn("", "Querying Network", 165, 40, -1, -1, 2, "", 9)
    Sleep(1000)
    If Ping(GUICtrlRead($cnTarget)) Then
        $strComputer = GUICtrlRead($cnTarget)
        $objWMIService = ObjGet("winmgmts:\\" & $strComputer & "\root\CIMV2")
        SplashOff()
        If Not IsObj($objWMIService) Then
            GUICtrlSetData($cnMessage, 'Failed to connect to system')
            GUICtrlSetColor($cnMessage, 0xFF0000)
            Return
        EndIf
        ;===WMI BIOS
        $colItems1 = $objWMIService.ExecQuery("SELECT * FROM Win32_Bios")
        $message = "System Info for " & $strComputer & @CRLF & $Separator & @CRLF & @CRLF
        For $objItem In $colItems1
            $message &= "Dell Asset Number: " & $objItem.SerialNumber & @CRLF & _
                    "Manufacturer: " & $objItem.Manufacturer & @CRLF & @CRLF
            Global $surreal = $objItem.SerialNumber
            Global $RemoteName = $strComputer
        Next
        ;===WMI NETWORK
        $colItems2 = $objWMIService.ExecQuery("SELECT * FROM Win32_NetworkAdapterConfiguration WHERE IPEnabled = True")
        For $objItem In $colItems2
            $message &= "IP Address: " & $objItem.IPAddress(0) & @CRLF & _
                    "IP Subnet: " & $objItem.IPSubnet(0) & @CRLF & @CRLF
        Next
        ;===WMI SYSTEM
        $colItems3 = $objWMIService.ExecQuery("SELECT * FROM Win32_ComputerSystem")
        For $objItem In $colItems3
            $message &= "Model: " & $objItem.Model & @CRLF & _
                    "Computer Name: " & $objItem.Name & @CRLF & _
                    "Last User: " & $objItem.UserName & @CRLF
            Global $RemoteUser = $objItem.UserName
        Next
        GUICtrlSetData($cnMessage, 'Connected, select user profile')
        GUICtrlSetColor($cnMessage, 0x008000)
        MsgBox(64, "System Information", $message)
    Else
        SplashOff()
        GUICtrlSetData($cnMessage, 'Target system could not be contacted')
        GUICtrlSetColor($cnMessage, 0xFF0000)
        Return
    EndIf
    Profile()
EndFunc   ;==>Connect

;===Function For Remote Profile Load===============================================================
Func Profile()
    Local $combo_string = ""
    $FolderList = _FileListToArray("\\" & GUICtrlRead($cnTarget) & "\c$" & $DOC, "*", 2)
    For $i = 1 To $FolderList[0]
        Switch $FolderList[$i]
            Case "All Users", "Default User", "LocalService", "NetworkService"
                ContinueLoop
            Case Else
                If $i = $FolderList[0] Then
                    $combo_string &= $FolderList[$i]
                Else
                    $combo_string &= $FolderList[$i] & "|"
                EndIf
        EndSwitch
    Next
    GUICtrlSetData($prCombo, $combo_string)
EndFunc   ;==>Profile

;===Function For Checkbox Actions==================================================================
Func StartButton()
    Local $Path = "\\" & GUICtrlRead($cnTarget)
    Local $rmdocs = $Path & "\c$" & $DOC & GUICtrlRead($prCombo) & "\" & $DF
    ;===My Documents
    If GUICtrlRead($BoxDocs) = $GUI_CHECKED Then GUICtrlSetData($cnMessage, 'Transferring: My Documents')
    GUICtrlSetColor($cnMessage, 0x008000)
    If BitAND(GUICtrlRead($BKItem), $GUI_CHECKED) = $GUI_CHECKED Then
        ;----------Local
        DirCreate($BKtarget & $Temp & $DF & "\" & GUICtrlRead($prCombo))
        _CopyWithProgress($rmdocs & "\*.*", $BKtarget & $Temp & $DF & "\" & GUICtrlRead($prCombo))
        FileWriteLine($LogFile, "My Documents" & @TAB & "(Backup Successful)" & @CRLF)
    Else
        ;----------Network
        DirCreate($Temp2 & $DF & "\" & GUICtrlRead($prCombo))
        _CopyWithProgress($rmdocs & "\*.*", $BKtarget & $Temp2 & $DF & "\" & GUICtrlRead($prCombo))
        FileWriteLine($LogFile, "My Documents" & @TAB & "(Successful)" & @CRLF)
    EndIf
    ;===Printers
    If GUICtrlRead($BoxPrinter) = $GUI_CHECKED Then GUICtrlSetData($cnMessage, 'Transferring: Printers')
    GUICtrlSetColor($cnMessage, 0x008000)
    If BitAND(GUICtrlRead($BKItem), $GUI_CHECKED) = $GUI_CHECKED Then
        DirCreate($BKtarget & $Temp & "Printers")
        Printers()
        FileWriteLine($LogFile, @CRLF & $Separator & "Lotus Notes:" & @TAB & "(:Local Successful)" & @CRLF)
    Else
        DirCreate($Temp2 & "Printers")
        Printers()
        FileWriteLine($LogFile, @CRLF & $Separator & "Lotus Notes:" & @TAB & "(Network Successful)" & @CRLF)
    EndIf
    ;===Lotus Notes
    If GUICtrlRead($BoxLotus) = $GUI_CHECKED Then GUICtrlSetData($cnMessage, 'Transferring: Lotus Notes')
    GUICtrlSetColor($cnMessage, 0x008000)
    If BitAND(GUICtrlRead($BKItem), $GUI_CHECKED) = $GUI_CHECKED Then
        DirCreate($BKtarget & $Temp & "Notes")
        _CopyWithProgress($Lotus_Location & "\*.id", $BKtarget & $Temp & "Notes")
        _CopyWithProgress($Lotus_Location & "\Desktop6.ndk", $BKtarget & $Temp & "Notes")
        _CopyWithProgress($Lotus_Location & "\Names.nsf", $BKtarget & $Temp & "Notes")
        _CopyWithProgress($Lotus_Location & "\User.dic", $BKtarget & $Temp & "Notes")
        DirCreate($BKtarget & $Temp & "Notes\Archive")
        _CopyWithProgress($Lotus_Location & "\Archive", $BKtarget & $Temp & "Notes\Archive")
        FileWriteLine($LogFile, @CRLF & $Separator & "Lotus Notes:" & @TAB & "(Local Successful)" & @CRLF)
    Else
        DirCreate($Temp2 & "Notes")
        _CopyWithProgress($Lotus_Location & "\*.id", $Temp2 & "Notes")
        _CopyWithProgress($Lotus_Location & "\Desktop6.ndk", $Temp2 & "Notes")
        _CopyWithProgress($Lotus_Location & "\Names.nsf", $Temp2 & "Notes")
        _CopyWithProgress($Lotus_Location & "\User.dic", $Temp2 & "Notes")
        DirCreate($Temp2 & "Notes\Archive")
        _CopyWithProgress($Lotus_Location & "\Archive", $Temp2 & "Notes\Archive")
        FileWriteLine($LogFile, @CRLF & $Separator & "Lotus Notes:" & @TAB & "(Network Successful)" & @CRLF)
    EndIf
    SoundPlay(@WindowsDir & "\media\tada.wav", 1)
    $Success = MsgBox(4, "", "Migration Was Successful. Do You Want To Exit?")
    If $Success = 6 Then Exit
EndFunc   ;==>StartButton

;===Function For Save Printer Info File============================================================
Func Printers()
    Local $passet = GUICtrlRead($cnTarget)
    If BitAND(GUICtrlRead($BKItem), $GUI_CHECKED) = $GUI_CHECKED Then
        Local $pLocation = $BKtarget & $Temp & "Printers\Printers.txt"
    Else
        Local $pLocation = $Temp2 & "Printers\Printers.txt"
    EndIf

    $pFile = FileOpen($pLocation, 10)
    For $i = 1 To 25
        $p = _HKCU_EnumVal("\\\" & $passet & "\Software\Microsoft\Windows NT\CurrentVersion\Devices", $i)
        $iProdp = 1
        For $n = 1 To $p[0][0]
            $iProdp *= $p[$n][2]
            If $p[$n][2] = 0 Then
                $ppath = _HKCU_Read("\\\" & $passet & "\\" & $p[$n][1], "Devices")
            EndIf
            If StringRegExp($p[$n][1], "^\\\\(?!\\)") Then
                FileWriteLine($pFile, $p[$n][1] & "," & $ppath[1][1])
            EndIf
        Next
        If $iProdp <> 0 Then ExitLoop
    Next
EndFunc   ;==>Printers

;===Function For Lotus Notes Child Window==========================================================
Func Lotus()
    $ChildWin = GUICreate("", 135, 110, -1, -1, $WS_EX_TOPMOST)
    GUISwitch($ChildWin)
    $Box_Single = GUICtrlCreateRadio("Single User Install", 10, 10)
    $Box_Multi = GUICtrlCreateRadio("Multi User Install", 10, 30)
    $Box_System = GUICtrlCreateRadio("Root System Install", 10, 50)
    GUISetState()
    While 1
        $lnmsg = GUIGetMsg()
        Select
            Case $lnmsg = $Box_Single And BitAND(GUICtrlRead($Box_Single), $GUI_CHECKED) = $GUI_CHECKED
                Global $Lotus_Location = "\\" & GUICtrlRead($cnTarget) & "\c$\Program Files\Lotus\Notes\Data"
                GUIDelete($ChildWin)
                ExitLoop
                GUISwitch($ParentWin)
                GUISetState(@SW_SHOW, $ParentWin)
            Case $lnmsg = $Box_Multi And BitAND(GUICtrlRead($Box_Multi), $GUI_CHECKED) = $GUI_CHECKED
                Global $Lotus_Location = "\\" & GUICtrlRead($cnTarget) & "\c$" & $DOC & GUICtrlRead($prCombo) & "\Local Settings\Application Data\Lotus\Notes\Data"
                GUIDelete($ChildWin)
                ExitLoop
                GUISwitch($ParentWin)
                GUISetState(@SW_SHOW, $ParentWin)
            Case $lnmsg = $Box_System And BitAND(GUICtrlRead($Box_System), $GUI_CHECKED) = $GUI_CHECKED
                Global $Lotus_Location = "\\" & GUICtrlRead($cnTarget) & "\c$\Lotus\Notes\Data"
                GUIDelete($ChildWin)
                ExitLoop
                GUISwitch($ParentWin)
                GUISetState(@SW_SHOW, $ParentWin)
        EndSelect
    WEnd
EndFunc   ;==>Lotus

maybe i call a function checkboxes() that is something like:

if checkbox1 checked then another function endif

if checkbox2 checked then another function endif

if checkbox3 checked then another function endif

another function()

if local checked then

copy to local location

else

if network checked then

copy to network location

else

if restore checked then

copy to restore location

endif

not even sure if the above is right, do to i have each checkbox doing something different within it, pretty much looking for correct syntax, thank you everyone for your help.

d@ve

Edited November 11, 2009 by surreal

Herb191 · November 11, 2009

Are you looking for something like this?

If BitAND(GUICtrlRead($checkbox1), $GUI_CHECKED) Then _Function1()
If BitAND(GUICtrlRead($checkbox2), $GUI_CHECKED) Then _Function2()
If BitAND(GUICtrlRead($checkbox3), $GUI_CHECKED) Then _Function3()

EndFunc · November 11, 2009

below is my code, i have at this time two process local backup $temp and network backup $temp2 are the locations, all in at this time c:temp.

i was going to try and add a restore from backup local backup $temp3, not created yet do to i found a problem with my code.

im going to try and explain this as best as posable, if you have any question please ask.

checkboxes if $GUI_CHECKED then do local or network or restore depending on whats checked. the code that i have provided will do local or network no matter if checkbox is checked or not.

#include <ButtonConstants.au3>
#include <ComboConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <File.au3>
#include <Array.au3>
#include <HKCUReg.au3>
#include <WinCopy.au3>

;===Checks Local OSVersion Create Var User Friendly================================================
$OS = @OSVersion
$OS = StringReplace($OS, "WIN_VISTA", "Windows Vista")
$OS = StringReplace($OS, "WIN_XP", "Windows XP")
$OS = StringReplace($OS, "WIN_2000", "Windows 2000")
;===Determines Documents Location According To OS++================================================
$OSDOC = @OSVersion
If $OSDOC = "WIN_VISTA" Then $DOC = "\Users\"
If $OSDOC = "WIN_XP" Then
    $DOC = "\Documents and Settings\"
EndIf
$OSDF = @OSVersion
If $OSDF = "WIN_VISTA" Then $DF = "Documents"
If $OSDF = "WIN_XP" Then
    $DF = "My Documents"
EndIf

Local $Temp = "\Migrate_Local\"
Local $Temp2 = "\Migrate_Network\"
Local $LogFile = "c:\Temp\LogFile.txt"
Local $Separator = "------------------------------"

;===GUI Start and File Menu========================================================================
$ParentWin = GUICreate("", 330, 165, -1, -1)

$FileMenu = GUICtrlCreateMenu("&File")
$BKItem = GUICtrlCreateMenuItem("Backup Only", $FileMenu)
$RSItem = GUICtrlCreateMenuItem("Restore Only", $FileMenu)
GUICtrlSetState($BKItem, $GUI_UNCHECKED)
GUICtrlSetState($RSItem, $GUI_UNCHECKED)
$ExitItem = GUICtrlCreateMenuItem("Exit", $FileMenu)
$ViewMenu = GUICtrlCreateMenu("&View")
$LogItem = GUICtrlCreateMenuItem("Log File", $ViewMenu)
$ProMenu = GUICtrlCreateMenu("&Programs")
$RDItem = GUICtrlCreateMenuItem("Remote Desktop", $ProMenu)
$CMItem = GUICtrlCreateMenuItem("Computer Management", $ProMenu)
$CPItem = GUICtrlCreateMenuItem("Command Prompt", $ProMenu)
$HelpMenu = GUICtrlCreateMenu("&Help")
$HelpItem = GUICtrlCreateMenuItem("Help", $HelpMenu)

;===GUI Network Computer To Tranfer From===========================================================
GUICtrlCreateGroup("System", 10, 10, 190, 75)
GUICtrlCreateLabel("Computer Name:", 20, 25)
$cnTarget = GUICtrlCreateInput(@ComputerName, 20, 40, 120, 20)
$cnMessage = GUICtrlCreateLabel("Enter computer name or ip address", 20, 64, 175, 15)
$cnButton = GUICtrlCreateButton("Connect", 145, 35, 50, 25, $WS_GROUP)

;===GUI Network User Profile=======================================================================
GUICtrlCreateGroup("Profile:", 10, 90, 190, 45)
$prCombo = GUICtrlCreateCombo("", 20, 105, 175, 20)

;===GUI Group What To Migrate======================================================================
GUICtrlCreateGroup("Tranfer", 210, 10, 110, 80)
$BoxDocs = GUICtrlCreateCheckbox("My Documents", 220, 25)
$BoxPrinter = GUICtrlCreateCheckbox("Network Printers", 220, 45)
$BoxLotus = GUICtrlCreateCheckbox("Lotus Notes", 220, 65)
GUICtrlSetState($BoxDocs, $GUI_CHECKED)
GUICtrlSetState($BoxPrinter, $GUI_CHECKED)

;===GUI Start Function=============================================================================
$StartButton = GUICtrlCreateButton("Start", 230, 100, 65, 30, $WS_GROUP)
GUISetState(@SW_SHOW)

;===Start Of GUIGetMsg=============================================================================
While 1
    $msg = GUIGetMsg()
    Select

        ;===Case For Exit GUI==============================================================================
        Case $msg = $ExitItem Or $msg = $GUI_EVENT_CLOSE
            $FormClose = MsgBox(36, "", "Are you sure you want to exit?")
            If $FormClose = 6 Then
                GUIDelete()
                Exit
            EndIf

            ;===Case For File Menu Items=======================================================================
        Case $msg = $BKItem
            If BitAND(GUICtrlRead($BKItem), $GUI_CHECKED) = $GUI_CHECKED Then
                GUICtrlSetState($BKItem, $GUI_UNCHECKED)
            Else
                GUICtrlSetState($BKItem, $GUI_CHECKED)
                Local $BKtarget = FileSelectFolder("Choose the location you want to back up to:", "")
                If $BKtarget = '' Then GUICtrlSetState($BKItem, $GUI_UNCHECKED)
            EndIf
        Case $msg = $RSItem
            If BitAND(GUICtrlRead($RSItem), $GUI_CHECKED) = $GUI_CHECKED Then
                GUICtrlSetState($RSItem, $GUI_UNCHECKED)
            Else
                GUICtrlSetState($RSItem, $GUI_CHECKED)
                Local $RStarget = FileSelectFolder("Choose the location you want to restore from:", "")
                If $RStarget = '' Then GUICtrlSetState($RSItem, $GUI_UNCHECKED)
            EndIf
        Case $msg = $HelpItem
            MsgBox(64, "", "Help File Coming Soon")
        Case $msg = $RDItem
            Run('mstsc.exe', @SystemDir)
        Case $msg = $CMItem
            ShellExecute('compmgmt.msc', @SystemDir, @SW_MAXIMIZE)
        Case $msg = $LogItem
            If FileExists($LogFile) Then
                ShellExecute($LogFile, "")
            Else
                MsgBox(48, "", "A Log File has not been created yet.")
            EndIf
        Case $msg = $CPItem
            Run('cmd.exe', @SystemDir)

            ;===Case For Lotus Notes CheckBox==================================================================
        Case $msg = $BoxLotus
            If GUICtrlRead($cnTarget) = '' Or GUICtrlRead($prCombo) = '' Then
                MsgBox(16, "", 'Target machine and a profile must be entered')
                GUICtrlSetState($BoxLotus, $GUI_UNCHECKED)
            EndIf

            If BitAND(GUICtrlRead($BoxLotus), $GUI_UNCHECKED) = $GUI_UNCHECKED Then
                GUICtrlSetState($BoxLotus, $GUI_UNCHECKED)
            Else
                Lotus()
                GUICtrlSetState($BoxLotus, $GUI_CHECKED)
            EndIf
            ;===Case For Connect===============================================================================
        Case $msg = $cnButton
            If GUICtrlRead($cnTarget) = '' Then
                GUICtrlSetData($cnMessage, 'Target machine must be entered')
                GUICtrlSetColor($cnMessage, 0xFF0000)
                ContinueLoop
            EndIf
            $Log = FileOpen($LogFile, 10)
            FileWriteLine($LogFile, "Started: " & @MON & "/" & @MDAY & "/" & @YEAR & " at " & @HOUR & ":" & @MIN & ":" & @SEC & @CRLF & @CRLF & "System Info" & @CRLF & $Separator & @CRLF)
            FileWriteLine($LogFile, "Operating System: " & $OS & @CRLF & "Computer Name: " & @ComputerName & @CRLF)
            FileClose($LogFile)
            Connect()

        Case $msg = $StartButton
            If GUICtrlRead($cnTarget) = '' Or GUICtrlRead($prCombo) = '' Then
                MsgBox(16, "", 'Target machine and a profile must be entered')
            Else
                StartButton()
            EndIf
    EndSelect
WEnd

;===Function For Remote System InfoBox=============================================================
Func Connect()
    SplashTextOn("", "Querying Network", 165, 40, -1, -1, 2, "", 9)
    Sleep(1000)
    If Ping(GUICtrlRead($cnTarget)) Then
        $strComputer = GUICtrlRead($cnTarget)
        $objWMIService = ObjGet("winmgmts:\\" & $strComputer & "\root\CIMV2")
        SplashOff()
        If Not IsObj($objWMIService) Then
            GUICtrlSetData($cnMessage, 'Failed to connect to system')
            GUICtrlSetColor($cnMessage, 0xFF0000)
            Return
        EndIf
        ;===WMI BIOS
        $colItems1 = $objWMIService.ExecQuery("SELECT * FROM Win32_Bios")
        $message = "System Info for " & $strComputer & @CRLF & $Separator & @CRLF & @CRLF
        For $objItem In $colItems1
            $message &= "Dell Asset Number: " & $objItem.SerialNumber & @CRLF & _
                    "Manufacturer: " & $objItem.Manufacturer & @CRLF & @CRLF
            Global $surreal = $objItem.SerialNumber
            Global $RemoteName = $strComputer
        Next
        ;===WMI NETWORK
        $colItems2 = $objWMIService.ExecQuery("SELECT * FROM Win32_NetworkAdapterConfiguration WHERE IPEnabled = True")
        For $objItem In $colItems2
            $message &= "IP Address: " & $objItem.IPAddress(0) & @CRLF & _
                    "IP Subnet: " & $objItem.IPSubnet(0) & @CRLF & @CRLF
        Next
        ;===WMI SYSTEM
        $colItems3 = $objWMIService.ExecQuery("SELECT * FROM Win32_ComputerSystem")
        For $objItem In $colItems3
            $message &= "Model: " & $objItem.Model & @CRLF & _
                    "Computer Name: " & $objItem.Name & @CRLF & _
                    "Last User: " & $objItem.UserName & @CRLF
            Global $RemoteUser = $objItem.UserName
        Next
        GUICtrlSetData($cnMessage, 'Connected, select user profile')
        GUICtrlSetColor($cnMessage, 0x008000)
        MsgBox(64, "System Information", $message)
    Else
        SplashOff()
        GUICtrlSetData($cnMessage, 'Target system could not be contacted')
        GUICtrlSetColor($cnMessage, 0xFF0000)
        Return
    EndIf
    Profile()
EndFunc   ;==>Connect

;===Function For Remote Profile Load===============================================================
Func Profile()
    Local $combo_string = ""
    $FolderList = _FileListToArray("\\" & GUICtrlRead($cnTarget) & "\c$" & $DOC, "*", 2)
    For $i = 1 To $FolderList[0]
        Switch $FolderList[$i]
            Case "All Users", "Default User", "LocalService", "NetworkService"
                ContinueLoop
            Case Else
                If $i = $FolderList[0] Then
                    $combo_string &= $FolderList[$i]
                Else
                    $combo_string &= $FolderList[$i] & "|"
                EndIf
        EndSwitch
    Next
    GUICtrlSetData($prCombo, $combo_string)
EndFunc   ;==>Profile

;===Function For Checkbox Actions==================================================================
Func StartButton()
    Local $Path = "\\" & GUICtrlRead($cnTarget)
    Local $rmdocs = $Path & "\c$" & $DOC & GUICtrlRead($prCombo) & "\" & $DF
    ;===My Documents
    If GUICtrlRead($BoxDocs) = $GUI_CHECKED Then GUICtrlSetData($cnMessage, 'Transferring: My Documents')
    GUICtrlSetColor($cnMessage, 0x008000)
    If BitAND(GUICtrlRead($BKItem), $GUI_CHECKED) = $GUI_CHECKED Then
        ;----------Local
        DirCreate($BKtarget & $Temp & $DF & "\" & GUICtrlRead($prCombo))
        _CopyWithProgress($rmdocs & "\*.*", $BKtarget & $Temp & $DF & "\" & GUICtrlRead($prCombo))
        FileWriteLine($LogFile, "My Documents" & @TAB & "(Backup Successful)" & @CRLF)
    Else
        ;----------Network
        DirCreate($Temp2 & $DF & "\" & GUICtrlRead($prCombo))
        _CopyWithProgress($rmdocs & "\*.*", $BKtarget & $Temp2 & $DF & "\" & GUICtrlRead($prCombo))
        FileWriteLine($LogFile, "My Documents" & @TAB & "(Successful)" & @CRLF)
    EndIf
    ;===Printers
    If GUICtrlRead($BoxPrinter) = $GUI_CHECKED Then GUICtrlSetData($cnMessage, 'Transferring: Printers')
    GUICtrlSetColor($cnMessage, 0x008000)
    If BitAND(GUICtrlRead($BKItem), $GUI_CHECKED) = $GUI_CHECKED Then
        DirCreate($BKtarget & $Temp & "Printers")
        Printers()
        FileWriteLine($LogFile, @CRLF & $Separator & "Lotus Notes:" & @TAB & "(:Local Successful)" & @CRLF)
    Else
        DirCreate($Temp2 & "Printers")
        Printers()
        FileWriteLine($LogFile, @CRLF & $Separator & "Lotus Notes:" & @TAB & "(Network Successful)" & @CRLF)
    EndIf
    ;===Lotus Notes
    If GUICtrlRead($BoxLotus) = $GUI_CHECKED Then GUICtrlSetData($cnMessage, 'Transferring: Lotus Notes')
    GUICtrlSetColor($cnMessage, 0x008000)
    If BitAND(GUICtrlRead($BKItem), $GUI_CHECKED) = $GUI_CHECKED Then
        DirCreate($BKtarget & $Temp & "Notes")
        _CopyWithProgress($Lotus_Location & "\*.id", $BKtarget & $Temp & "Notes")
        _CopyWithProgress($Lotus_Location & "\Desktop6.ndk", $BKtarget & $Temp & "Notes")
        _CopyWithProgress($Lotus_Location & "\Names.nsf", $BKtarget & $Temp & "Notes")
        _CopyWithProgress($Lotus_Location & "\User.dic", $BKtarget & $Temp & "Notes")
        DirCreate($BKtarget & $Temp & "Notes\Archive")
        _CopyWithProgress($Lotus_Location & "\Archive", $BKtarget & $Temp & "Notes\Archive")
        FileWriteLine($LogFile, @CRLF & $Separator & "Lotus Notes:" & @TAB & "(Local Successful)" & @CRLF)
    Else
        DirCreate($Temp2 & "Notes")
        _CopyWithProgress($Lotus_Location & "\*.id", $Temp2 & "Notes")
        _CopyWithProgress($Lotus_Location & "\Desktop6.ndk", $Temp2 & "Notes")
        _CopyWithProgress($Lotus_Location & "\Names.nsf", $Temp2 & "Notes")
        _CopyWithProgress($Lotus_Location & "\User.dic", $Temp2 & "Notes")
        DirCreate($Temp2 & "Notes\Archive")
        _CopyWithProgress($Lotus_Location & "\Archive", $Temp2 & "Notes\Archive")
        FileWriteLine($LogFile, @CRLF & $Separator & "Lotus Notes:" & @TAB & "(Network Successful)" & @CRLF)
    EndIf
    SoundPlay(@WindowsDir & "\media\tada.wav", 1)
    $Success = MsgBox(4, "", "Migration Was Successful. Do You Want To Exit?")
    If $Success = 6 Then Exit
EndFunc   ;==>StartButton

;===Function For Save Printer Info File============================================================
Func Printers()
    Local $passet = GUICtrlRead($cnTarget)
    If BitAND(GUICtrlRead($BKItem), $GUI_CHECKED) = $GUI_CHECKED Then
        Local $pLocation = $BKtarget & $Temp & "Printers\Printers.txt"
    Else
        Local $pLocation = $Temp2 & "Printers\Printers.txt"
    EndIf

    $pFile = FileOpen($pLocation, 10)
    For $i = 1 To 25
        $p = _HKCU_EnumVal("\\\" & $passet & "\Software\Microsoft\Windows NT\CurrentVersion\Devices", $i)
        $iProdp = 1
        For $n = 1 To $p[0][0]
            $iProdp *= $p[$n][2]
            If $p[$n][2] = 0 Then
                $ppath = _HKCU_Read("\\\" & $passet & "\\" & $p[$n][1], "Devices")
            EndIf
            If StringRegExp($p[$n][1], "^\\\\(?!\\)") Then
                FileWriteLine($pFile, $p[$n][1] & "," & $ppath[1][1])
            EndIf
        Next
        If $iProdp <> 0 Then ExitLoop
    Next
EndFunc   ;==>Printers

;===Function For Lotus Notes Child Window==========================================================
Func Lotus()
    $ChildWin = GUICreate("", 135, 110, -1, -1, $WS_EX_TOPMOST)
    GUISwitch($ChildWin)
    $Box_Single = GUICtrlCreateRadio("Single User Install", 10, 10)
    $Box_Multi = GUICtrlCreateRadio("Multi User Install", 10, 30)
    $Box_System = GUICtrlCreateRadio("Root System Install", 10, 50)
    GUISetState()
    While 1
        $lnmsg = GUIGetMsg()
        Select
            Case $lnmsg = $Box_Single And BitAND(GUICtrlRead($Box_Single), $GUI_CHECKED) = $GUI_CHECKED
                Global $Lotus_Location = "\\" & GUICtrlRead($cnTarget) & "\c$\Program Files\Lotus\Notes\Data"
                GUIDelete($ChildWin)
                ExitLoop
                GUISwitch($ParentWin)
                GUISetState(@SW_SHOW, $ParentWin)
            Case $lnmsg = $Box_Multi And BitAND(GUICtrlRead($Box_Multi), $GUI_CHECKED) = $GUI_CHECKED
                Global $Lotus_Location = "\\" & GUICtrlRead($cnTarget) & "\c$" & $DOC & GUICtrlRead($prCombo) & "\Local Settings\Application Data\Lotus\Notes\Data"
                GUIDelete($ChildWin)
                ExitLoop
                GUISwitch($ParentWin)
                GUISetState(@SW_SHOW, $ParentWin)
            Case $lnmsg = $Box_System And BitAND(GUICtrlRead($Box_System), $GUI_CHECKED) = $GUI_CHECKED
                Global $Lotus_Location = "\\" & GUICtrlRead($cnTarget) & "\c$\Lotus\Notes\Data"
                GUIDelete($ChildWin)
                ExitLoop
                GUISwitch($ParentWin)
                GUISetState(@SW_SHOW, $ParentWin)
        EndSelect
    WEnd
EndFunc   ;==>Lotus

maybe i call a function checkboxes() that is something like:

if checkbox1 checked then another function endif

if checkbox2 checked then another function endif

if checkbox3 checked then another function endif

another function()

if local checked then

copy to local location

else

if network checked then

copy to network location

else

if restore checked then

copy to restore location

endif

not even sure if the above is right, do to i have each checkbox doing something different within it, pretty much looking for correct syntax, thank you everyone for your help.

d@ve

You mentioned that was your code but you don't have the correct syntax to an if/endif statement? Just asking. Are you trying to modify someone else's code? Not a problem if you are, but just seemed a bit in depth for you to be asking about a basic function.

Anyway, check the help file for correct syntax. It's pretty good and even gives good examples.

You can't have more than one else in an if statement or you will get an error unless it is within another nested If statement. You need to use ElseIf to check checking more conditions, Else is the final action if none match.

surreal · November 11, 2009

thank you everyone.

sorry EndFunc for the simple question, yes this is my code been working on it for about 3 months now. this is actually a small version of the main project. i use this to not overwhelm helpers with so much code and hope to get to a final stage to be worthy of posting in examples.

i was reading about the elseif but for some reason thought it would create the same result. and i was getting an error when using it ""elseif" is closing previous "func"" was playing with it as you guys replied. i have learned so much from writing this code, my third and largest project yet. but as i learn it has been nice to be able to help others within this forum as well.

thanks again, and i will post the working code for others if i can get this working.

d@ve

Edited November 11, 2009 by surreal

surreal · November 11, 2009

If GUICtrlRead($BoxDocs) = $GUI_CHECKED Then
        GUICtrlSetData($cnMessage, 'Transferring: My Documents')
        GUICtrlSetColor($cnMessage, 0x008000)
        ;----------Network
        DirCreate($Network & $DF & "\" & GUICtrlRead($prCombo))
        _CopyWithProgress($rmdocs & "\*.*", $network & $DF & "\" & GUICtrlRead($prCombo))
        FileWriteLine($LogFile, "My Documents" & @TAB & "(Network Successful)" & @CRLF)
    ElseIf BitAND(GUICtrlRead($BKItem), $GUI_CHECKED) = $GUI_CHECKED Then
        ;----------Backup
        DirCreate($BKtarget & $backup & $DF & "\" & GUICtrlRead($prCombo))
        _CopyWithProgress($rmdocs & "\*.*", $BKtarget & $backup & $DF & "\" & GUICtrlRead($prCombo))
        FileWriteLine($LogFile, "My Documents" & @TAB & "(Backup Successful)" & @CRLF)
    ElseIf BitAND(GUICtrlRead($RSItem), $GUI_CHECKED) = $GUI_CHECKED Then
        ;----------Restore
        DirCreate($RStarget & $restore & $DF & "\" & GUICtrlRead($prCombo))
        _CopyWithProgress($rmdocs & "\*.*", $RStarget & $restore & $DF & "\" & GUICtrlRead($prCombo))
        FileWriteLine($LogFile, "My Documents" & @TAB & "(Restore Successful)" & @CRLF)
EndIf

update: that didnt work, but the below code did!

;===My Documents
    If GUICtrlRead($BoxDocs) = $GUI_CHECKED And BitAND(GUICtrlRead($BKItem), $GUI_CHECKED) = $GUI_CHECKED Then
        GUICtrlSetData($cnMessage, 'Backup: My Documents')
        GUICtrlSetColor($cnMessage, 0x008000)
        ;----------Backup
        DirCreate($BKtarget & $backup & $DF & "\" & GUICtrlRead($prCombo))
        _CopyWithProgress($rmdocs & "\*.*", $BKtarget & $backup & $DF & "\" & GUICtrlRead($prCombo))
        FileWriteLine($LogFile, "My Documents" & @TAB & "(Backup Successful)" & @CRLF)
    ElseIf GUICtrlRead($BoxDocs) = $GUI_CHECKED And BitAND(GUICtrlRead($RSItem), $GUI_CHECKED) = $GUI_CHECKED Then
        GUICtrlSetData($cnMessage, 'Restore: My Documents')
        GUICtrlSetColor($cnMessage, 0x008000)
        ;----------Restore
        DirCreate($RStarget & $restore & $DF & "\" & GUICtrlRead($prCombo))
        _CopyWithProgress($rmdocs & "\*.*", $RStarget & $restore & $DF & "\" & GUICtrlRead($prCombo))
        FileWriteLine($LogFile, "My Documents" & @TAB & "(Restore Successful)" & @CRLF)
    ElseIf GUICtrlRead($BoxDocs) = $GUI_CHECKED Then
        GUICtrlSetData($cnMessage, 'Transferring: My Documents')
        GUICtrlSetColor($cnMessage, 0x008000)
        ;----------Network
        DirCreate($network & $DF & "\" & GUICtrlRead($prCombo))
        _CopyWithProgress($rmdocs & "\*.*", $network & $DF & "\" & GUICtrlRead($prCombo))
        FileWriteLine($LogFile, "My Documents" & @TAB & "(Network Successful)" & @CRLF)
    EndIf

Edited November 11, 2009 by surreal

whim · November 11, 2009

I usually define myself a little function to make my code easier to read:

Func IsChecked($control)
    If BitAND(GUICtrlRead($control), 1) = 1 Then ; $GUI_CHECKED = 1
        Return 1
    Else
        Return 0
    EndIf
EndFunc   ;==>IsChecked

cheers,

whim

Sign In

If...ElseIf...Else...EndIf Help

Recommended Posts

surreal

Link to comment

Share on other sites

Herb191

Link to comment

Share on other sites

EndFunc

Link to comment

Share on other sites

surreal

Link to comment

Share on other sites

surreal

Link to comment

Share on other sites

whim

Link to comment

Share on other sites

Create an account or sign in to comment

Create an account

Sign in

Recently Browsing 0 members

Browse

AutoIt Resources

Release

Beta