Jump to content

Monitor processes

kevev

By kevev
in AutoIt General Help and Support

 Share

Recommended Posts

kevev Seeker

kevev

Posted
Posted

Hello Everyone. It has been a long time since I touched any of my AutoIt code.

I am having trouble checking to see if 2 processes are running.

$oPID needs to be checked to see if a PID is returned. If I start openvpn.exe manually then start the gui I will see it is running. Then select stop and the status will show stopped. But If I start the GUI with the service stopped and click start the status does not show the service is running.

$aPID output is checked for the string "unknown" somewhere is all the output of the adb.exe command. This is having the same issue as $oPID except it is worse. I cant get anychange in the status in the GUI even if the service is started first.

I am not seeing the status in my gui change when I kill the processes and start them with the buttons I programmed.

The code is an OpenSource Christmas gift for the android users @ the xda-developers.com community. So I would like to get it completed as soon as possible. :)

Thank You in advance.

#NoTrayIcon
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_Icon=icon.ico
#AutoIt3Wrapper_Compression=4
#AutoIt3Wrapper_Res_Comment=No Warranties or Guarantees are implied or offered by the Author or Distributor. All code covered by "GNU GENERAL PUBLIC LICENSE V2, June 1991".
#AutoIt3Wrapper_Res_Description=A frontend for the "Great" Android usb tethering package by aziwoqpd(jperry) "azilink".
#AutoIt3Wrapper_Res_Fileversion=1.0.2.15
#AutoIt3Wrapper_Res_FileVersion_AutoIncrement=y
#AutoIt3Wrapper_Res_LegalCopyright=http://kevev.net/
#AutoIt3Wrapper_Res_SaveSource=y
#AutoIt3Wrapper_Res_Language=1033
#AutoIt3Wrapper_Au3Check_Stop_OnWarning=y
#AutoIt3Wrapper_Run_Tidy=y
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
; This script controlls connect/disconnect of AziLink in Windows;
#include <Array.au3>
#include <Constants.au3>
#include <GuiConstantsEx.au3>
#include <Misc.au3>
#include <Process.au3>

Opt("GUIOnEventMode", 1)

; Only run one instance
If _Singleton("azilink-gui", 1) = 0 Then
    Exit
EndIf

; VARIABLES
$mainwindows = GUICreate("azilink-gui", 180, 90)
GUISetOnEvent($GUI_EVENT_CLOSE, "exititem")

$Filemenu = GUICtrlCreateMenu("File")
$installitem = GUICtrlCreateMenuItem("Install apk...", $Filemenu)
GUICtrlSetOnEvent($installitem, "Installitem")
$separator1 = GUICtrlCreateMenuItem("", $Filemenu)
$exititem = GUICtrlCreateMenuItem("Exit", $Filemenu)
GUICtrlSetOnEvent($exititem, "exititem")
$helpmenu = GUICtrlCreateMenu("Help")
$readmeitem = GUICtrlCreateMenuItem("Readme", $helpmenu)
GUICtrlSetOnEvent($readmeitem, "readmeitem")
$aboutitem = GUICtrlCreateMenuItem("About", $helpmenu)
GUICtrlSetOnEvent($aboutitem, "aboutitem")
$connectbutton = GUICtrlCreateButton("Connect", 10, 40, 70, 20)
GUICtrlSetOnEvent($connectbutton, "connectbutton")
$disconnectbutton = GUICtrlCreateButton("Disconnect", 100, 40, 70, 20)
GUICtrlSetOnEvent($disconnectbutton, "disconnectbutton")

$adb = "adb\adb.exe" & " forward" & " tcp:41927" & " tcp:41927"
$openvpn = "openvpn --config azilink.ovpn"
$oPID = ProcessExists("openvpn.exe")
$aPID = ProcessExists("adb.exe")
$adbinstall = "adb\adb.exe" & " install" & " azilink-2.0.2.apk" & " &" & " pause"
$DeviceDetect = "adb\adb.exe" & " get-state"
$Readme = "notepad.exe azilink-gui_howto.txt"
;$DetectOut = _RunWait($DeviceDetect, "", @SW_HIDE, 2)
;$DetectOut = StringInStr($DeviceDetect, "tcp:4192")
$DetectOut = StringInStr($DeviceDetect, "unknown")
GUISetState(@SW_SHOW)

; FUNCTIONS
Func _RunWait($sFilename, $sWorkingdir = "", $sFlag = "", $iIOFlag = "", $iTimeOut = 0)
    Local $pid = Run($sFilename, $sWorkingdir, $sFlag, $iIOFlag)
    If $iTimeOut Then $timer = TimerInit()
    While ProcessExists($pid)
        Sleep(50)
        If $iTimeOut Then
            If TimerDiff($timer) >= $iTimeOut Then ExitLoop
        EndIf
    WEnd
    If ProcessExists($pid) Then
        ProcessClose($pid)
        If StderrRead($pid) <> "" Then Return SetError(2, 0, StderrRead($pid))
        Return SetError(3, 0, StdoutRead($pid))
    EndIf
    If StderrRead($pid) <> "" Then Return SetError(1, 0, StderrRead($pid))
    Return StdoutRead($pid)
EndFunc   ;==>_RunWait

Func installitem()
    $pid = ProcessExists("adb.exe")
    While $pid
        ProcessClose($pid)
        $pid = ProcessExists("adb.exe")
    WEnd
    $file = RunWait(@ComSpec & " /c " & $adbinstall)
EndFunc   ;==>installitem

Func readmeitem()
    Run($Readme, "", @SW_SHOWDEFAULT)
EndFunc   ;==>readmeitem

Func aboutitem()
    MsgBox(0, "About", "Created by kevin evans (http://kevev.net) for AziLink (Jim Perry http://code.google.com/p/azilink/) GPL v2")
EndFunc   ;==>aboutitem

Func connectbutton()
    _RunWait($adb, "", @SW_HIDE, 2)
    Run($openvpn, "", @SW_HIDE)
EndFunc   ;==>connectbutton

Func disconnectbutton()
    $oPID = ProcessExists("openvpn.exe")
    If $oPID Then
        While $oPID
            ProcessClose($oPID)
            $oPID = ProcessExists("openvpn.exe")
        WEnd
    EndIf
    $aPID = ProcessExists("adb.exe")
    If $aPID Then
        While $aPID
            ProcessClose($aPID)
            $aPID = ProcessExists("adb.exe")
        WEnd
    EndIf
EndFunc   ;==>disconnectbutton

Func exititem()
    disconnectbutton()
    Exit
EndFunc   ;==>exititem

While 1
    If Not $oPID Then
        Run($adb, "", @SW_HIDE, 2)
    EndIf
    If $oPID Then
        GUICtrlCreateLabel("(Link Enabled)", 30, 15, 110, 15)
    Else
        GUICtrlCreateLabel("(Link Disabled)", 30, 15, 110, 15)
    EndIf
    If $DetectOut <> 0 Then
        ;If $DetectOut Then
        GUICtrlCreateLabel("(Device Detected)", 30, 1, 110, 15)
    Else
        GUICtrlCreateLabel("(Device Not Detected!)", 30, 1, 110, 15)
    EndIf
    Sleep(1000) ; Idle around
WEnd
kevev Seeker

kevev

Posted
  • Author
Posted

You didn't save the new PID to $oPID: 

While 1
    If Not $oPID Then $oPID = Run($adb, "", @SW_HIDE, 2)
    
    ; ...
    
WEnd

:)

Thank You PsaltyDS. I don't think that I explained my self very well. Your tip did lead me in the correct direction. I am now able to monitor the adb.exe & openvpn.exe processes.

While 1
    $oPID = ProcessExists("openvpn.exe")
    $aPID = ProcessExists("adb.exe")
    If Not $oPID Then
        Run($adb, "", @SW_HIDE, 2)
    EndIf
    If $oPID Then
        GUICtrlCreateLabel("(Link Enabled)", 30, 15, 110, 15)
    Else
        GUICtrlCreateLabel("(Link Disabled)", 30, 15, 110, 15)
    EndIf
    If $DetectOut <> 0 Then
        ;If $DetectOut Then
        GUICtrlCreateLabel("(Device Detected)", 30, 1, 110, 15)
    Else
        GUICtrlCreateLabel("(Device Not Detected!)", 30, 1, 110, 15)
    EndIf
    Sleep(1000) ; Idle around
WEnd

Now I need to figure out how to detect the device an easy way. I tried reading the output from the 'adb.exe get-state' command. But the output is different depending on whether adb.exe was already running, the port forwarding is already enabled, the divice is properly connected. So, I am looking into detecting the device in the "Device Manager" or the registry or another way. Does anyone have a good way to detect a device driver being used even if it is by different devices?

kevev Seeker

kevev

Posted
  • Author
Posted

I decided to just read the output of adb.exe . It was not that difficult. My app is complete. The code is GPL2 if anyone wants to use it. I will be posting it to a few Android sites.

#NoTrayIcon
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_Icon=icon.ico
#AutoIt3Wrapper_Compression=4
#AutoIt3Wrapper_Res_Comment=No Warranties or Guarantees are implied or offered by the Author or Distributor. All code covered by "GNU GENERAL PUBLIC LICENSE V2, June 1991".
#AutoIt3Wrapper_Res_Description=A frontend for the "Great" Android usb tethering package by aziwoqpd(jperry) "azilink".
#AutoIt3Wrapper_Res_Fileversion=1.0.2.16
#AutoIt3Wrapper_Res_FileVersion_AutoIncrement=y
#AutoIt3Wrapper_Res_LegalCopyright=http://kevev.net/
#AutoIt3Wrapper_Res_SaveSource=y
#AutoIt3Wrapper_Res_Language=1033
#AutoIt3Wrapper_Au3Check_Stop_OnWarning=y
#AutoIt3Wrapper_Run_Tidy=y
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
; This script controlls connect/disconnect of AziLink in Windows;
#include <Array.au3>
#include <Constants.au3>
#include <GuiConstantsEx.au3>
#include <Misc.au3>
#include <Process.au3>

Opt("GUIOnEventMode", 1)

; Only run one instance
If _Singleton("azilink-gui", 1) = 0 Then
    Exit
EndIf

; VARIABLES
$mainwindows = GUICreate("azilink-gui", 180, 90)
GUISetOnEvent($GUI_EVENT_CLOSE, "exititem")
$Filemenu = GUICtrlCreateMenu("File")
$installitem = GUICtrlCreateMenuItem("Install apk...", $Filemenu)
GUICtrlSetOnEvent($installitem, "Installitem")
$separator1 = GUICtrlCreateMenuItem("", $Filemenu)
$exititem = GUICtrlCreateMenuItem("Exit", $Filemenu)
GUICtrlSetOnEvent($exititem, "exititem")
$helpmenu = GUICtrlCreateMenu("Help")
$readmeitem = GUICtrlCreateMenuItem("Readme", $helpmenu)
GUICtrlSetOnEvent($readmeitem, "readmeitem")
$aboutitem = GUICtrlCreateMenuItem("About", $helpmenu)
GUICtrlSetOnEvent($aboutitem, "aboutitem")
$connectbutton = GUICtrlCreateButton("Connect", 10, 40, 70, 20)
GUICtrlSetOnEvent($connectbutton, "connectbutton")
$disconnectbutton = GUICtrlCreateButton("Disconnect", 100, 40, 70, 20)
GUICtrlSetOnEvent($disconnectbutton, "disconnectbutton")

$LinkStatusLast = ""
$LinkLabel = "1"
$DeviceStatusLast = ""
$DeviceLabel = "1"
$adb = "adb\adb.exe" & " forward" & " tcp:41927" & " tcp:41927"
$openvpn = "openvpn --config azilink.ovpn"
$adbinstall = "adb\adb.exe" & " install" & " azilink-2.0.2.apk" & " &" & " pause"
$DeviceDetect = "adb\adb.exe" & " get-state"
$DetectOut = _RunWait($DeviceDetect, "", @SW_HIDE, 2)
GUISetState(@SW_SHOW)

; FUNCTIONS
Func _RunWait($sFilename, $sWorkingdir = "", $sFlag = "", $iIOFlag = "", $iTimeOut = 0)
    Local $pid = Run($sFilename, $sWorkingdir, $sFlag, $iIOFlag)
    If $iTimeOut Then $timer = TimerInit()
    While ProcessExists($pid)
        Sleep(50)
        If $iTimeOut Then
            If TimerDiff($timer) >= $iTimeOut Then ExitLoop
        EndIf
    WEnd
    If ProcessExists($pid) Then
        ProcessClose($pid)
        If StderrRead($pid) <> "" Then Return SetError(2, 0, StderrRead($pid))
        Return SetError(3, 0, StdoutRead($pid))
    EndIf
    If StderrRead($pid) <> "" Then Return SetError(1, 0, StderrRead($pid))
    Return StdoutRead($pid)
EndFunc   ;==>_RunWait

Func installitem()
    $pid = ProcessExists("adb.exe")
    While $pid
        ProcessClose($pid)
        $pid = ProcessExists("adb.exe")
    WEnd
    $file = RunWait(@ComSpec & " /c " & $adbinstall)
EndFunc   ;==>installitem

Func readmeitem()
    $Readme = FileOpen("azilink-gui_howto.txt", 0)
    If $Readme = -1 Then
        MsgBox(0, "Error", "Unable to open azilink-gui_howto.txt")
        Exit
    EndIf

    While 1
        $chars = FileRead($Readme)
        If @error = -1 Then ExitLoop
        MsgBox(0, "Char read:", $chars)
    WEnd

    FileClose($Readme)
EndFunc   ;==>readmeitem

Func aboutitem()
    MsgBox(0, "About", "Created by kevin evans (http://kevev.net) for AziLink (Jim Perry http://code.google.com/p/azilink/) GPL v2")
EndFunc   ;==>aboutitem

Func connectbutton()
    _RunWait($adb, "", @SW_HIDE, 2)
    Run($openvpn, "", @SW_HIDE)
EndFunc   ;==>connectbutton

Func disconnectbutton()
    $oPID = ProcessExists("openvpn.exe")
    If $oPID Then
        While $oPID
            ProcessClose($oPID)
            $oPID = ProcessExists("openvpn.exe")
        WEnd
    EndIf
    $aPID = ProcessExists("adb.exe")
    If $aPID Then
        While $aPID
            ProcessClose($aPID)
            $aPID = ProcessExists("adb.exe")
        WEnd
    EndIf
EndFunc   ;==>disconnectbutton

Func exititem()
    disconnectbutton()
    Exit
EndFunc   ;==>exititem

While 1
    $oPID = ProcessExists("openvpn.exe")
    $aPID = ProcessExists("adb.exe")
    $DetectOut = _RunWait($DeviceDetect, "", @SW_HIDE, 2)

    If Not $oPID Then
        Run($adb, "", @SW_HIDE, 2)
    EndIf
    If $oPID Then
        $LinkStatus = "(Link Enabled)"
    Else
        $LinkStatus = "(Link Disabled)"
    EndIf
    If $LinkStatusLast <> $LinkStatus Then
        $LinkLabel = GUICtrlCreateLabel($LinkStatus, 30, 15, 110, 15)
        $LinkStatusLast = $LinkStatus
    EndIf

    If $DetectOut = "device" & @CRLF Then
        $DeviceStatus = "(Device Detected)"
    Else
        $DeviceStatus = "(Device Not Detected!)"
    EndIf
    If $DeviceStatusLast <> $DeviceStatus Then
        $DeviceLabel = GUICtrlCreateLabel($DeviceStatus, 30, 1, 110, 15)
        $DeviceStatusLast = $DeviceStatus
    EndIf
    Sleep(1500) ; Idle around
WEnd

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...