kolinrp24 0 Posted July 3, 2005 (edited) i made this over the past few weeks in order to keep up with my paycheck. it uses v3.1.1.53 (beta) so i included 3 files u could download. The 2 .txt's are the exact same, it was accidently uploaded twice. It doesn't matter which one u use. Paycheck.txt (14 KB) download and change to .au3, v3.1.1.53 (beta) needed Paycheck.au3 (14 KB) download and run, v3.1.1.53 (beta) needed or here is the code -----------------------------CODE-START---------------------------- #include <GuiConstants.au3> #include<GUIList.au3> #include<date.au3> #include <Array.au3> $iniexists = IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Wage", "0") If $iniexists = 0 Then IniWrite(@ScriptDir & "\Paycheck.ini", "Options", "Wage", "0") IniWrite(@ScriptDir & "\Paycheck.ini", "Options", "Dollar Value", "0") IniWrite(@ScriptDir & "\Paycheck.ini", "Options", "Percent", "0") IniWrite(@ScriptDir & "\Paycheck.ini", "Options", "Percentdollar", "0") IniWrite(@ScriptDir & "\Paycheck.ini", "Options", "Dollarpercent", "0") IniWrite(@ScriptDir & "\Paycheck.ini", "Options", "Timeandahalf", "0") IniWrite(@ScriptDir & "\Paycheck.ini", "Grand Total", "Grand Total Hours", "0") IniWrite(@ScriptDir & "\Paycheck.ini", "Grand Total", "Grand Total", "0") EndIf GUICreate("Paycheck Tracker v1.0", 339, 210, (@DesktopWidth - 339) / 2, (@DesktopHeight - 210) / 2, $WS_OVERLAPPEDWINDOW + $WS_VISIBLE + $WS_CLIPSIBLINGS) $clearok = 0 $paycheckhours = 0 $grandtotal = IniRead(@ScriptDir & "\Paycheck.ini", "Grand Total", "Grand Total", "0") $grandtotalhours = IniRead(@ScriptDir & "\Paycheck.ini", "Grand Total", "Grand Total Hours", "0") $Update = GUICtrlCreateButton("Update", 20, 50, 80, 20) $ViewPaycheck = GUICtrlCreateButton("View Paycheck", 130, 50, 80, 20) $NewPaycheck = GUICtrlCreateButton("New Paycheck", 130, 90, 80, 20) $Options = GUICtrlCreateButton("Options", 20, 90, 80, 20) $ReviewHours = GUICtrlCreateButton("Review Hours", 240, 50, 80, 20) $About = GUICtrlCreateButton("About", 240, 90, 80, 20) $Exit = GUICtrlCreateButton("Exit", 240, 180, 80, 20) $Label_8 = GUICtrlCreateLabel("Paycheck Tracker", 0, 0, 340, 40) GUICtrlSetFont(-1, 25, "", "", "Dragonwick") $Label_9 = GUICtrlCreateLabel("Press [update] to add more hours that you have worked. Press [Options] to set your wage and deductions.", 30, 130, 280, 30) GUISetState() While 1 $msg = GUIGetMsg() Select Case $msg = $Update $updategui = GUICreate("Update", 219, 331, (@DesktopWidth - 219) / 2, (@DesktopHeight - 228) / 2, $WS_OVERLAPPEDWINDOW + $WS_VISIBLE + $WS_CLIPSIBLINGS) $updatelabel = GUICtrlCreateLabel("Update", 0, 0, 220, 50, $SS_CENTER) GUICtrlSetFont(-1, 30, "", "", "Dragonwick") $cancel = GUICtrlCreateButton("Cancel", 130, 255, 60, 20) $update2 = GUICtrlCreateButton("Update", 30, 255, 60, 20) $updateDate = GUICtrlCreateMonthCal ("", 15, 70, 186, 163) $hoursworked = GUICtrlCreateInput("0.00", 115, 233, 80, 20) $Label_8 = GUICtrlCreateLabel("Select the date you worked", 50, 50, 140, 20) $Label_9 = GUICtrlCreateLabel("Hours Worked*", 35, 238, 80, 15) $Label_10 = GUICtrlCreateLabel("*Enter the hours in decimal form. Ex: 7 hours and 15 min. should be typed as 7.25 . To find the decimal you take the minutes you worked and divide them by 60. 15/60=25.", 3, 275, 220, 60) GUISetState() While 1 $msg = GUIGetMsg() Select Case $msg = $GUI_EVENT_CLOSE ExitLoop Case $msg = $cancel ExitLoop Case $msg = $update2 IniWrite(@ScriptDir & "\Paycheck.ini", "Current Paycheck", GUICtrlRead($updateDate), GUICtrlRead($hoursworked)) ExitLoop ;;; EndSelect WEnd GUIDelete("Update") Case $msg = $ViewPaycheck $paychecktotal = 0 $readhours = IniReadSection(@ScriptDir & "\Paycheck.ini", "Current Paycheck") If @error Then MsgBox(4096, "", "No hours means no cash.") Else For $i = 1 To $readhours[0][0] If IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Timeandahalf", "0") = 1 And $readhours[$i][1] > 8 Then $readhours[$i][1] = $readhours[$i][1]+ (1.5* ($readhours[$i][1] - 8)) EndIf $paychecktotal = $paychecktotal + $readhours[$i][1] Next $paychecktotal = $paychecktotal * IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Wage", "0.00") If IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Percentdollar", "0") = 1 Then $paychecktotal = $paychecktotal- (IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Percent", "0") * .01 * $paychecktotal) - IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Dollar Value", "0.00") ElseIf IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Dollarpercent", "0") = 1 Then $paychecktotal = $paychecktotal - IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Dollar Value", "0.00") $paychecktotal = $paychecktotal- (IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Percent", "0") * .01 * $paychecktotal) EndIf MsgBox(0, "", "$" & Round($paychecktotal, 2) & " made during this paycheck.") EndIf Case $msg = $NewPaycheck $iMsgBoxAnswer = MsgBox(52, "New Paycheck?", "Are you sure you want to clear the current paycheck and start a new one?") Select Case $iMsgBoxAnswer = 6 ;Yes $paychecktotal = 0 $readhours = IniReadSection(@ScriptDir & "\Paycheck.ini", "Current Paycheck") If @error Then MsgBox(4096, "", "Error occured, probably no INI file.") Else For $i = 1 To $readhours[0][0] $paycheckhours = $paycheckhours + $readhours[$i][1] If IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Timeandahalf", "0") = 1 And $readhours[$i][1] > 8 Then $readhours[$i][1] = $readhours[$i][1]+ (1.5* ($readhours[$i][1] - 8)) EndIf IniWrite(@ScriptDir & "\Paycheck.ini", "All Paychecks", $readhours[$i][0], $readhours[$i][1]) $paychecktotal = $paychecktotal + $readhours[$i][1] IniDelete(@ScriptDir & "\Paycheck.ini", "Current Paycheck", $readhours[$i][0]) Next $paychecktotal = $paychecktotal * IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Wage", "0.00") If IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Percentdollar", "0") = 1 Then $paychecktotal = $paychecktotal- (IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Percent", "0") * .01 * $paychecktotal) - IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Dollar Value", "0.00") ElseIf IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Dollarpercent", "0") = 1 Then $paychecktotal = $paychecktotal - IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Dollar Value", "0.00") $paychecktotal = $paychecktotal- (IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Percent", "0") * .01 * $paychecktotal) EndIf Round($paychecktotal, 2) $grandtotal = $grandtotal + $paychecktotal $grandtotalhours = $grandtotalhours + $paycheckhours IniWrite(@ScriptDir & "\Paycheck.ini", "Grand Total", "Grand Total Hours", $grandtotalhours) IniWrite(@ScriptDir & "\Paycheck.ini", "Grand Total", "Grand Total", $grandtotal) EndIf Case $iMsgBoxAnswer = 7 ;No ExitLoop EndSelect Case $msg = $Options;done GUICreate("Options", 240, 268, (@DesktopWidth - 240) / 2, (@DesktopHeight - 268) / 2, $WS_OVERLAPPEDWINDOW + $WS_VISIBLE + $WS_CLIPSIBLINGS) $OptionsLabel = GUICtrlCreateLabel("Options", 0, 0, 240, 90) GUICtrlSetFont(-1, 38, "", "", "Dragonwick") $WageLabel = GUICtrlCreateLabel("Wage", 0, 90, 40, 20) $WageInput = GUICtrlCreateInput(IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Wage", "0.00"), 40, 90, 60, 20) $DollarvalLabel = GUICtrlCreateLabel("Dollar Value", 10, 140, 60, 20) $Deductgroup = GUICtrlCreateGroup("Deductions", 0, 120, 140, 110) $DollarvalInput = GUICtrlCreateInput(IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Dollar Value", "0.00"), 70, 140, 60, 20) $PercentLabel = GUICtrlCreateLabel("Percent", 10, 160, 60, 20) $PercentInput = GUICtrlCreateInput(IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Percent", "0"), 70, 160, 60, 20) $PercentRadio = GUICtrlCreateRadio("Percent then dollar.", 10, 180, 120, 20) If IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Percentdollar", "0") = 1 Then GUICtrlSetState (-1, $GUI_CHECKED) $DollarRadio = GUICtrlCreateRadio("Dollar then percent.", 10, 200, 120, 20) If IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Dollarpercent", "0") = 1 Then GUICtrlSetState (-1, $GUI_CHECKED) $Checkbox = GUICtrlCreateCheckbox("Time and a half after 8 hours.", 40, 230, 160, 20) If IniRead(@ScriptDir & "\Paycheck.ini", "Options", "Timeandahalf", "0") = 1 Then GUICtrlSetState (-1, $GUI_CHECKED) $Accept = GUICtrlCreateButton("Accept", 150, 130, 80, 30) $OptionsCancel = GUICtrlCreateButton("Cancel", 150, 190, 80, 30) GUISetState() While 1 $msg = GUIGetMsg() Select Case $msg = $GUI_EVENT_CLOSE ExitLoop Case $msg = $Accept If GUICtrlRead($Checkbox) = 1 Then $taah = 1 Else $taah = 0 EndIf If GUICtrlRead($PercentRadio) = 1 Then $pd = 1 $dp = 0 Else $dp = 1 $pd = 0 EndIf IniWrite(@ScriptDir & "\Paycheck.ini", "Options", "Wage", GUICtrlRead($WageInput)) IniWrite(@ScriptDir & "\Paycheck.ini", "Options", "Dollar Value", GUICtrlRead($DollarvalInput)) IniWrite(@ScriptDir & "\Paycheck.ini", "Options", "Percent", GUICtrlRead($PercentInput)) IniWrite(@ScriptDir & "\Paycheck.ini", "Options", "Percentdollar", $pd) IniWrite(@ScriptDir & "\Paycheck.ini", "Options", "Dollarpercent", $dp) IniWrite(@ScriptDir & "\Paycheck.ini", "Options", "Timeandahalf", $taah) ExitLoop Case $msg = $OptionsCancel ExitLoop EndSelect WEnd GUIDelete("Options") Case $msg = $ReviewHours GUICreate("Review Hours", 390, 341, (@DesktopWidth - 390) / 2, (@DesktopHeight - 341) / 2, $WS_OVERLAPPEDWINDOW + $WS_VISIBLE + $WS_CLIPSIBLINGS) $alldays = GUICtrlCreateList("", 190, 55, 200, 274, $LBS_DISABLENOSCROLL + $WS_VSCROLL + $LBS_NOTIFY) $RHDate = GUICtrlCreateMonthCal ("", 0, 55, 186, 158) GUICtrlSetData(-1, _NowDate()) $RHLabel2 = GUICtrlCreateLabel("Review Hours", 0, 0, 190, 50, $SS_CENTER) GUICtrlSetFont(-1, 20, "", "", "Dragonwick") $RHOK = GUICtrlCreateButton("OK", 10, 220, 90, 30) $RHTotalearned = GUICtrlCreateButton("Total Earned", 50, 260, 90, 30) $RHClearall = GUICtrlCreateButton("Clear all", 90, 300, 90, 30) $madethisday = IniRead(@ScriptDir & "\Paycheck.ini", "Current Paycheck", _NowDate(), "0") + IniRead(@ScriptDir & "\Paycheck.ini", "All Paychecks", _NowDate(), "0") $RHLabel = GUICtrlCreateLabel("$" & $madethisday & " made on this day. Press [Ok] to return to the main menu.", 190, 0, 200, 50) GUISetState() $allhours = IniReadSection(@ScriptDir & "\Paycheck.ini", "All Paychecks") If @error Then MsgBox(4096, "", "No hours means no cash.") $nohours = 1 Else $nohours = 0 For $i = 1 To $allhours[0][0] GUICtrlSetData($alldays, _DateTimeFormat($allhours[$i][0], 1), _DateTimeFormat($allhours[1][0], 1)) Next GUICtrlSetData($RHDate, $allhours[1][0]) $firstselect = _DateTimeFormat($allhours[1][0], 1) GUICtrlSetData($RHLabel, "You worked " & IniRead(@ScriptDir & "\Paycheck.ini", "All Paychecks", GUICtrlRead($RHDate), "0") & " hours this day. Press [Ok] to return to the main menu.") EndIf While 1 $msg = GUIGetMsg() Select Case $nohours = 1 ExitLoop Case $msg = $GUI_EVENT_CLOSE ExitLoop Case $msg = $RHOK If $clearok = 1 Then IniDelete(@ScriptDir & "\Paycheck.ini", "Options") IniDelete(@ScriptDir & "\Paycheck.ini", "Current Paycheck") IniDelete(@ScriptDir & "\Paycheck.ini", "Grand Total") IniDelete(@ScriptDir & "\Paycheck.ini", "All Paychecks") IniWrite(@ScriptDir & "\Paycheck.ini", "Options", "Wage", "0.00") IniWrite(@ScriptDir & "\Paycheck.ini", "Grand Total", "Grand Total Hours", "0") IniWrite(@ScriptDir & "\Paycheck.ini", "Grand Total", "Grand Total", "0") _GUICtrlListClear ($alldays) $clearok = 0 Else ExitLoop EndIf Case $msg = $RHTotalearned $clearok = 0 GUICtrlSetData($RHLabel, "You have earned a grand total of $" & IniRead(@ScriptDir & "\Paycheck.ini", "Grand Total", "Grand Total", "0") & " since your first entry, excluding this paycheck. Press [Ok] to return to the main menu.") Case $msg = $RHClearall GUICtrlSetData($RHLabel, "If you are sure that you want to clear ALL data, press [Ok]. If you don't want to, click a button or date other than [Ok].") $clearok = 1 Case Else $too = _DateTimeFormat(GUICtrlRead($RHDate), 1) If GUICtrlRead($alldays) = $too Then Else If GUICtrlRead($alldays) = $firstselect Then $clearok = 0 $ret = _GUICtrlListSelectString ($alldays, $too) If ($ret == $LB_ERR) Then Else $firstselect = $too GUICtrlSetData($RHLabel, "You worked " & IniRead(@ScriptDir & "\Paycheck.ini", "All Paychecks", GUICtrlRead($RHDate), "0") & " hours this day. Press [Ok] to return to the main menu.") EndIf Else $clearok = 0 $firstselect = GUICtrlRead($alldays) $YYYY = StringRight($firstselect, 4) $DD = StringTrimRight($firstselect, 6) $DD = StringRight($DD, 2) If StringInStr($firstselect, "January") Then $MM = "01" If StringInStr($firstselect, "February") Then $MM = "02" If StringInStr($firstselect, "March") Then $MM = "03" If StringInStr($firstselect, "April") Then $MM = "04" If StringInStr($firstselect, "May") Then $MM = "05" If StringInStr($firstselect, "June") Then $MM = "06" If StringInStr($firstselect, "July") Then $MM = "07" If StringInStr($firstselect, "August") Then $MM = "08" If StringInStr($firstselect, "September") Then $MM = "09" If StringInStr($firstselect, "October") Then $MM = "10" If StringInStr($firstselect, "November") Then $MM = "11" If StringInStr($firstselect, "December") Then $MM = "12" $YYYYMMDD = $YYYY & "/" & $MM & "/" & $DD GUICtrlSetData($RHDate, $YYYYMMDD) GUICtrlSetData($RHLabel, "You worked " & IniRead(@ScriptDir & "\Paycheck.ini", "All Paychecks", $YYYYMMDD, "0") & " hours this day. Press [Ok] to return to the main menu.") EndIf EndIf EndSelect WEnd GUIDelete("Review Hours") Case $msg = $About;finished MsgBox(64, "About Paycheck Tracker", "Paycheck Tracker v1.0" & @CRLF & "By Kolin Paulk June 26, 2005") Case $msg = $Exit;finished ExitLoop Case $msg = $GUI_EVENT_CLOSE ExitLoop Case Else ;;; EndSelect WEnd Exit -----------------------------CODE-END---------------------------- its my first post, so please comment or suggest hope you like, -kolinrp24paycheck.txtpaycheck.txtpaycheck.au3 Edited July 4, 2005 by kolinrp24 Share this post Link to post Share on other sites
