Jump to content

IStorage interface

step887

By step887
in AutoItX Help and Support

 Share

Recommended Posts

step887 Adventurer

step887

Posted
Posted

So I am trying to use autoit to extract out a ole2 file

I am open the file using StgOpenStorage (http://msdn.microsoft.com/en-us/library/aa380341(v=vs.85).aspx) dllcall, but I am not sure how to make that into an autoit object

I was trying to get CLSID using ReadClassStg (http://msdn.microsoft.com/en-us/library/aa380302(v=vs.85).aspx)

 
then maybe use ObjCreateInterface, but autoit crashes with everything I tried.
 
I maybe going about this wrong way, can anyone assist
#include <array.au3>
Global $S_ok = 0
Global $s_false = 1
Global Const $tagGUID = "ulong Data1;ushort Data2;ushort Data3;byte Data4[8]"
Local $tStg = DllStructCreate('int')
Local $pStg = DllStructGetPtr($tStg)

Local $aGUID = DllStructCreate($tagGUID)
Local $pGUID = DllStructGetPtr($aGUID)


Local $filename = 'c:\users\stephen\desktop\doc1.doc'
If Not _isOleFile($filename) Then
    MsgBox(0, 'error', 'Not Ole')
    Exit
EndIf
$ret = DllCall("Ole32.dll", 'int', 'StgOpenStorage', 'wstr', $filename, 'ptr', 0, 'int', BitOR(0x00400000, 0, 0x00000040), 'ptr', 0, 'int', 0, 'ptr', $pStg) ;~   STGM_DIRECT_SWMR | STGM_READ | STGM_SHARE_DENY_NONE
ConsoleWrite($pStg & @CRLF)
$ret = DllCall("Ole32.dll", 'int', 'ReadClassStg', 'ptr', $pStg, 'struct*', $pGUID)

;StgOpenStorage function http://msdn.microsoft.com/en-us/library/aa380341(v=vs.85).aspx
;STGM Constants   http://msdn.microsoft.com/en-us/library/windows/desktop/aa380337(v=vs.85).aspx
;COM Error Codes (STG, RPC) http://msdn.microsoft.com/en-us/library/windows/desktop/dd542645(v=vs.85).aspx
;IStorage interface http://msdn.microsoft.com/en-us/library/aa380015(v=vs.85).aspx
Func _isOleFile($afilename)
    $ret = DllCall("Ole32.dll", 'int', 'StgIsStorageFile', 'wstr', $afilename)
    If $ret[0] = $S_ok Then
        Return True
    Else
        Return False
    EndIf
EndFunc   ;==>_isOleFile
doc1 is just a doc file with embedded image
 
 
 
 
 

 

 

 

Doc1.doc

jaberwacky Universalist

jaberwacky

Posted
Posted

Run this and tell us which one of the included error codes you get (if any).

#AutoIt3Wrapper_AU3Check_Parameters=-w 1 -w 2 -w 3 -w 4 -w 6 -w 7 -d

#include <Constants.au3>

#include <Array.au3>

Global Const $S_OK = 0
Global Const $S_FALSE = 1
Global Const $STG_E_INVALIDFUNCTION = 0x80030001
Global Const $STG_E_FILENOTFOUND = 0x80030002
Global Const $STG_E_PATHNOTFOUND = 0x80030003
Global Const $STG_E_TOOMANYOPENFILES = 0x80030004
Global Const $STG_E_ACCESSDENIED = 0x80030005
Global Const $STG_E_INVALIDHANDLE = 0x80030006
Global Const $STG_E_INSUFFICIENTMEMORY = 0x80030008
Global Const $STG_E_INVALIDPOINTER = 0x80030009
Global Const $STG_E_NOMOREFILES = 0x80030012
Global Const $STG_E_DISKISWRITEPROTECTED = 0x80030013
Global Const $STG_E_SEEKERROR = 0x80030019
Global Const $STG_E_WRITEFAULT = 0x8003001D
Global Const $STG_E_READFAULT = 0x8003001E
Global Const $STG_E_SHAREVIOLATION = 0x80030020
Global Const $STG_E_LOCKVIOLATION = 0x80030021
Global Const $STG_E_FILEALREADYEXISTS = 0x80030050
Global Const $STG_E_INVALIDPARAMETER = 0x80030057
Global Const $STG_E_MEDIUMFULL = 0x80030070
Global Const $STG_E_PROPSETMISMATCHED = 0x800300F0
Global Const $STG_E_ABNORMALAPIEXIT = 0x800300FA
Global Const $STG_E_INVALIDHEADER = 0x800300FB
Global Const $STG_E_INVALIDNAME = 0x800300FC
Global Const $STG_E_UNKNOWN = 0x800300FD
Global Const $STG_E_UNIMPLEMENTEDFUNCTION = 0x800300FE
Global Const $STG_E_INVALIDFLAG = 0x800300FF
Global Const $STG_E_INUSE = 0x80030100
Global Const $STG_E_NOTCURRENT = 0x80030101
Global Const $STG_E_REVERTED = 0x80030102
Global Const $STG_E_CANTSAVE = 0x80030103
Global Const $STG_E_OLDFORMAT = 0x80030104
Global Const $STG_E_OLDDLL = 0x80030105
Global Const $STG_E_SHAREREQUIRED = 0x80030106
Global Const $STG_E_NOTFILEBASEDSTORAGE = 0x80030107
Global Const $STG_E_EXTANTMARSHALLINGS = 0x80030108 
Global Const $STG_E_DOCFILECORRUPT = 0x80030109 
Global Const $STG_E_BADBASEADDRESS = 0x80030110 
Global Const $STG_E_DOCFILETOOLARGE = 0x80030111
Global Const $STG_E_NOTSIMPLEFORMAT = 0x80030112
Global Const $STG_E_INCOMPLETE = 0x80030201
Global Const $STG_E_TERMINATED = 0x80030202
Global Const $STG_S_CONVERTED = 0x00030200 

Global Const $filename = 'c:\users\stephen\desktop\doc1.doc'

If Not _isOleFile($filename) Then
    MsgBox($MB_OK + $MB_ICONEXCLAMATION, 'Error', 'Not Ole')
    Exit
EndIf

Global Const $tStg = DllStructCreate('int')

Global Const $pStg = DllStructGetPtr($tStg)

Global Const $StgOpenStorage = DllCall("Ole32.dll", 'int',   'StgOpenStorage',              _
                                                    'wstr',  $filename,                     _
                                                    'ptr',   0,                             _
                                                    'dword', BitOR(0x00400000, 0x00000040), _
                                                    'ptr',   0,                             _
                                                    'dword', 0,                             _
                                                    'ptr',   $pStg) ; STGM_DIRECT_SWMR | STGM_READ | STGM_SHARE_DENY_NONE

if @error then 
  MsgBox($MB_OK + $MB_ICONEXCLAMATION, "Error", @error & " $StgOpenStorage: " & $StgOpenStorage)
  exit
endif

ConsoleWrite("$StgOpenStorage: " & $StgOpenStorage[0] & @CRLF)

Global Const $tagGUID = "ulong Data1;ushort Data2;ushort Data3;byte Data4[8]"

Global Const $aGUID = DllStructCreate($tagGUID)

Global Const $pGUID = DllStructGetPtr($aGUID)

Global Const $ReadClassStg = DllCall("Ole32.dll", 'int', 'ReadClassStg', 'ptr', $pStg, 'struct*', $pGUID)

if @error then 
  MsgBox($MB_OK + $MB_ICONEXCLAMATION, "Error", @error & " $ReadClassStg: " & $ReadClassStg)
  exit
endif
ConsoleWrite("$ReadClassStg: " & $ReadClassStg[0] & @CRLF)

;StgOpenStorage function http://msdn.microsoft.com/en-us/library/aa380341(v=vs.85).aspx
;STGM Constants   http://msdn.microsoft.com/en-us/library/windows/desktop/aa380337(v=vs.85).aspx
;COM Error Codes (STG, RPC) http://msdn.microsoft.com/en-us/library/windows/desktop/dd542645(v=vs.85).aspx
;IStorage interface http://msdn.microsoft.com/en-us/library/aa380015(v=vs.85).aspx
Func _isOleFile(Const $afilename)
    Local Const $ret = DllCall("Ole32.dll", 'int', 'StgIsStorageFile', 'wstr', $afilename)
    
    If $ret[0] = $S_OK Then
        Return True
    Else
        Return False
    EndIf
EndFunc

Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum?

step887 Adventurer

step887

Posted
  • Author
Posted

I found this 

http://www.developerfusion.com/article/84406/com-structured-storage-from-net/

 

Open the file In most cases the first thing that you need to do when working with a structured storage file is to open it. Another helper function does this job – StgOpenStorage. Its definition can be found at PINVOKE.NET:[DllImport(“ole32.dll”)]
    static extern int StgOpenStorage(
        [MarshalAs(UnmanagedType.LPWStr)]
        string pwcsName, IStorage pstgPriority],
        STGM grfMode, IntPtr snbExclude, uint reserved,
        out IStorage ppstgOpen);

 

Which I do with 

$ret = DllCall("Ole32.dll", 'int', 'StgOpenStorage', 'wstr', $filename, 'ptr', 0, 'int', BitOR(0x00400000, 0, 0x00000040), 'ptr', 0, 'int', 0, 'ptr', $pStg) ;~   STGM_DIRECT_SWMR | STGM_READ | STGM_SHARE_DENY_NONE

They do a comimport:

 

[ComImport]
[Guid(“0000000b-0000-0000-C000-000000000046”)]
[interfaceType(ComInterfaceType.InterfaceIsIUnknown)]
interface IStorage
{
    void CreateStream(
    /* [string][in] */ string pwcsName,
    /* [in] */ uint grfMode,
    /* [in] */ uint reserved1,
    /* [in] */ uint reserved2,
    /* [out] */ out IStream ppstm);

 

Is there is any way to do this in autoit?  I tried 

Global $obj = ObjCreateInterface( "000000b-0000-0000-C000-000000000046" , "0000000B-0000-0000-C000-000000000046",$pStg )

I am not that good with COM objects, so any help is appreciated

jaberwacky Universalist

jaberwacky

Posted
Posted (edited)

 

in the console. I get

BUt you didn't see a MsgBox pop up?  That means you didn't run my example.

I apologize, my example doesn't do what I remeber I thought I had it do.  *SplaceFalm*

Sorry.

Edited by jaberwocky6669

Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum?

  • 3 years later...
n000b Seeker

n000b

Posted
Posted (edited)

Sorry, i have a problem with istorage too. (note: my nickname not joke!)

Have 1-lv compound-file (only streams). Can not read streams. Trying: 

#include <Array.au3>

Global $cUsrFile1c = "D:\my.md"

If StringLeft(_ArrayToString(DllCall("Ole32.dll", 'int', 'StgIsStorageFile', 'wstr', $cUsrFile1c), "#"),2) <> "0#" Then
    MsgBox(16, '<Error!>', $cUsrFile1c & " == if NOT iStorage-file !");
    Exit -1
EndIf
MsgBox(64, '<Ok>', $cUsrFile1c & " is iStorage-file ...");

Local $cMsg=""
Local $tStgOpened = DllStructCreate("int")
Local $pStgOpened = DllStructGetPtr($tStgOpened)
Global $aStgOpened = DllCall("Ole32.dll", "int", "StgOpenStorage", _
'wstr', $cUsrFile1c, _
'ptr', 0, _
'dword', BitOR(0x00400000, 0, 0x00000040), _    ; = STGM_DIRECT_SWMR | STGM_READ | STGM_SHARE_DENY_NONE
'ptr', 0, _
'dword', 0, _
'ptr', $pStgOpened )
$cMsg = "IStorage interface pointer (" & VarGetType ($pStgOpened) & ") = " & $pStgOpened
If IsArray($aStgOpened) Then
    $cMsg &= @CRLF & "Return Array = " & UBound($aStgOpened)
    If UBound($aStgOpened) = 0 Then
        MsgBox (16, "debug: <StgOpenStorage ERROR>", $cMsg)
        Exit -1
    EndIf
Else
    $cMsg &= @CRLF & "(ERROR) Return(" & VarGetType($aStgOpened) & ") = " & $aStgOpened
    MsgBox (16, "debug: <StgOpenStorage>", $cMsg )  ;******* HERE!
    Exit -1
EndIf
MsgBox (64, "debug: <StgOpenStorage>", $cMsg & "  " & $aStgOpened[0])
_ArrayDisplay( $aStgOpened, 'debug: <StgOpenStorage>')

$cMsg = ""
Local $cStreamName = "Container.Contents" & ChrW(0x0000)
Local $tStreamOpened = DllStructCreate("int")
Local $pStreamOpened = DllStructGetPtr($tStreamOpened)
Global $aStreamOpened = DllCall("Ole32.dll", 'int', 'OpenStream', _
'wchar', $cStreamName, _
'void',  0, _
'dword', BitOR(0x00400000, 0, 0x00000040), _    ; = STGM_DIRECT_SWMR | STGM_READ | STGM_SHARE_DENY_NONE
'dword', 0, _
"ptr", $pStreamOpened )
$cMsg = "ISream interface pointer (" & VarGetType($pStreamOpened) & ") = " & $pStreamOpened
If IsArray($aStreamOpened) Then
    $cMsg &= @CRLF & "Return Array = " & UBound($aStreamOpened) & " / " & $aStreamOpened[0]
    MsgBox (64, "debug: <OpenStream>", $cMsg)
    _ArrayDisplay( $aStreamOpened, '<OpenStream>')
Else
    $cMsg &= @CRLF & "(ERROR) Return(" & VarGetType($aStreamOpened) & ") = " & $aStreamOpened
    MsgBox (16, "debug: <OpenStream>", $cMsg )
    Exit -2
EndIf

;******* HERE! == "... (ERROR) Return(Int32) = 0

Edited by n000b

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...