Jump to content
  1. Wiliat87

    Wiliat87

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By mLipok
      Yeasterday I found this:
      https://stackoverflow.com/questions/496751/base64-encode-string-in-vbscript
      https://www.motobit.com/tips/detpg_quoted-printable-encode/
      https://www.motobit.com/tips/detpg_quoted-printable-decode/
      Here is AutoIt Version:
      #Region - QuotedPrintableEncode_Binary ;~ https://www.motobit.com/tips/detpg_quoted-printable-encode/ ; This article contains a short function for quoted printable encoding, using CDO.Message object. ; You can use this function in ASP or .VBS files (wsh - windows scripting host files), or directly in VBA (visual basic 5, 6, Word, Excel, Access and Outlook scripting). ; A source data of this function is a String variable and charset parameter of destination data. ; The source string (16bit VBScript BSTR variable) is first converted to a destination charset, using ADODB.Stream (GetDecodedContentStream). ; If the destination charset is not specified, the ADODB.Stream uses "iso-8859-1" by default. ; The EncodedContentStream then converts the binary data to a Quoted-Printable output string. ; VBScript QuotedPrintable encoding ; 2005 Antonin Foller http://www.motobit.com ; $s_SourceString - string variable with source data, BSTR type ; $s_CharSet - $s_CharSet of the destination data Func _QuotedPrintable_Encode($s_SourceString, $s_CharSet) ;Create CDO.$oCDOMessage object For the encoding. Local $oCDOMessage = ObjCreate("CDO.Message") ; Set the encoding $oCDOMessage.BodyPart.ContentTransferEncoding = "quoted-printable" ; Get the data $oStream To write source string data ; As ADODB.$oStream Local $oStream = $oCDOMessage.BodyPart.GetDecodedContent($oStream) ; Set the $s_CharSet For the destination data, If required If StringLen($s_CharSet) > 0 Then $oStream.CharSet = $s_CharSet ; Write the VBScript string To the $oStream. $oStream.WriteText($s_SourceString) ; Store the data To the $oCDOMessage BodyPart $oStream.Flush ; Get an encoded $oStream $oStream = $oCDOMessage.BodyPart.GetEncodedContent($oStream) ; read the encoded data As a string Return $oStream.ReadText ; You can use Read method To get a binary data. ; $oStream.Type = 1 ; Return $oStream.Read EndFunc ;==>QuotedPrintableEncode ; Next is a binary variant of the function, with bytearray (VT_UI1 VT_ARRAY) as input and output. ; You can simply modify these two functions for combination of binary and string input and output parameters. ; This Func is used on Quoted-printable encoder online sample page. ; VBScript QuotedPrintableEncode_Binary encoding ; 2005 Antonin Foller http://www.motobit.com Func _QuotedPrintable_Encode_Binary($dSourceBinary) ; Create CDO.$oCDOMessage object For the encoding. Local $oCDOMessage = ObjCreate("CDO.Message") ; Set the encoding $oCDOMessage.BodyPart.ContentTransferEncoding = "quoted-printable" ; Get the data $oStream To write source string data ; As ADODB.$oStream Local $oStream = $oCDOMessage.BodyPart.GetDecodedContent($oStream) ; Set the type of the $oStream To adTypeBinary. $oStream.Type = 1 ; Write the VBScript string To the $oStream. $oStream.Write($dSourceBinary) ; Store the data To the $oCDOMessage BodyPart $oStream.Flush ; Get an encoded $oStream $oStream = $oCDOMessage.BodyPart.GetEncodedContent($oStream) ; Set the type of the $oStream To adTypeBinary. $oStream.Type = 1 ; You can use Read method To get a binary data. Return = $oStream.Read EndFunc ;==>QuotedPrintableEncode_Binary #EndRegion - _QuotedPrintable_Encode_Binary #Region - _QuotedPrintable_Decode_Binary ;~ https://www.motobit.com/tips/detpg_quoted-printable-decode/ ; This article contains a short Func for quoted printable decoding, using CDO.Message object. ; You can use this Func in ASP or .VBS files (wsh - windows scripting host files), or directly in VBA (visual basic 5, 6, Word, Excel, Access and Outlook scripting). ; VBScript QuotedPrintableDecode decoding Function ; 2005 Antonin Foller http://www.motobit.com Func _QuotedPrintable_Decode($s_SourceData, $s_CharSet) ; Create CDO.Message object For the encoding. Local $oCDO_Message = ObjCreate("CDO.Message") ; Set the encoding $oCDO_Message.BodyPart.ContentTransferEncoding = "quoted-printable" ; Get the data $oStream To write source string data ; As ADODB.$oStream Local $oStream = $oCDO_Message.BodyPart.GetEncodedContent($oStream) If VarGetType($s_SourceData) = 'String' Then ; Set $s_CharSet To base windows $s_CharSet $oStream.CharSet = "windows-1250" ; Write the VBScript string To the $oStream. $oStream.WriteText($s_SourceData) Else ; Set the type of the $oStream To adTypeBinary. $oStream.Type = 1 ; Write the source binary data To the $oStream. $oStream.Write($s_SourceData) EndIf ; Store the data To the $oCDO_Message BodyPart $oStream.Flush ; Get an encoded $oStream $oStream = $oCDO_Message.BodyPart.GetDecodedContent($oStream) ; Set the type of the $oStream To adTypeBinary. $oStream.CharSet = $s_CharSet ; You can use Read method To get a binary data. Return $oStream.ReadText EndFunc ;==>_QuotedPrintable_Decode ; Next is a binary variant of the function, with bytearray (VT_UI1 VT_ARRAY) as output. ; The _QuotedPrintable_Decode_Binary then converts the binary data to a Quoted-Printable output string. ; Output of this Func are binary decoded data (you can use it, for example, as a data parameter of Response. ; BinaryWrite method) You can simply modify these two functions for combination of binary and string input and output parameters. ; This Func is used on Quoted-printable decoder online sample page. ; VBScript _QuotedPrintable_Decode_Binary decoding Function ; 2005 Antonin Foller http://www.motobit.com Func _QuotedPrintable_Decode_Binary($s_SourceData) ; Create CDO.Message object For the encoding. Local $oCDO_Message = ObjCreate("CDO.Message") ; Set the encoding $oCDO_Message.BodyPart.ContentTransferEncoding = "quoted-printable" ; Get the data $oStream To write source string data ; As ADODB.$oStream Local $oStream = $oCDO_Message.BodyPart.GetEncodedContent($oStream) If VarGetType($s_SourceData) = 'String' Then ; Write the VBScript string To the $oStream. $oStream.Write($s_SourceData) Else ; Set the type of the $oStream To adTypeBinary. $oStream.Type = 1 ; Write the source binary data To the $oStream. $oStream.Write($s_SourceData) EndIf ; Store the data To the $oCDO_Message BodyPart $oStream.Flush ; Get an encoded $oStream Set $oStream = $oCDO_Message.BodyPart.GetDecodedContent($oStream) ; Set the type of the $oStream To adTypeBinary. $oStream.Type = 1 ; You can use Read method To get a binary data. Return $oStream.Read EndFunc ;==>_QuotedPrintable_Decode_Binary #EndRegion - _QuotedPrintable_Decode_Binary  
      REMARK: License note from: https://www.motobit.com/tips/detpg_quoted-printable-decode/ and https://www.motobit.com/tips/detpg_quoted-printable-encode/:
       
    • By kurtykurtyboy
      GuiFlatButton is a UDF to easily create regular buttons with different colors for background, foreground, border, hover, focus, etc..
      This started as an effort to change the background color of a button and eventually grew into a full UDF.
      If you've looked around forums for changing button background colors, you have probably noticed that each proposed workaround has its own set of issues/side-effects. The answers usually circle back to 'use ownerdrawn buttons' and 'not worth it'. Well, now it is possible for anyone to easily create ownerdrawn buttons - totally worth it!
      Some issues with other workarounds such as drawing with GDI+ or using a colored label as a 'button':
      Not 'real' buttons so you lose built-in functionality that windows gives to buttons Messy / inefficient code in the main while loop to check for mouse position Slow to respond to click, paint, etc... Having to deal with GUIRegisterMsg messages Not straight-forward to implement GuiFlatButton is not a workaround; it is a technique to respond to Windows' built-in owner-drawn button events.
      With minimal effort, we can now create true simple colored buttons.
      The idea is to create an owner-drawn button using GUICtrlCreateButton then subclass the GUI and controls to handle the button-specific events to paint it however we want.
      This UDF magically does all of this for us! No need to worry about event handling or main while loop logic.
       
      How to use
      It couldn't be any easier! Simply create a new button using the familiar syntax. This creates an ownerdrawn button with default colors.
      $mybutton1 = GuiFlatButton_Create("Button 1", 78, 20, 120, 40) If you want to change the background and text colors:
      GuiFlatButton_SetBkColor(-1, 0x5555FF) GuiFlatButton_SetColor(-1, 0xFFFFFF) Advanced Usage
      Set background/text/border all at once
      GuiFlatButton_SetColors(-1, 0x0000FF, 0xFFFFFF, 0x9999FF) Set ALL colors for ALL button states! (normal, focus, hover, selected)
      Local $aColorsEx = [0x0000FF, 0xFFFFFF, -2, 0x4444FF, 0xFFFFFF, 0xAAAAFF, 0x6666FF, 0xFFFFFF, 0xCCCCFF, 0x0000EE, 0xFFFFFF, 0x7777EE] GuiFlatButton_SetColorsEx(-1, $aColorsEx) Set default colors to apply to any future buttons
      ;set colors GuiFlatButton_SetDefaultColors(0x0000FF, 0xFFFFFF, 0x9999FF) ;create buttons $mybutton1 = GuiFlatButton_Create("Button 1", 12, 20, 120, 40) $mybutton2 = GuiFlatButton_Create("Button 2", 143, 20, 120, 40) Set ALL color defaults
      ;set colors Local $aColorsEx = [0x0000FF, 0xFFFFFF, -2, 0x4444FF, 0xFFFFFF, 0xAAAAFF, 0x6666FF, 0xFFFFFF, 0xCCCCFF, 0x0000EE, 0xFFFFFF, 0x7777EE] GuiFlatButton_SetDefaultColorsEx($aColorsEx) ;create buttons $mybutton1 = GuiFlatButton_Create("Button 1", 12, 20, 120, 40) $mybutton2 = GuiFlatButton_Create("Button 2", 143, 20, 120, 40)  
      Available Functions
       
      Simple Example

      #include <GUIConstantsEx.au3> #include <MsgBoxConstants.au3> #include "GuiFlatButton.au3" Example() ;GUI with one button Func Example() Local $hGUI, $mybutton1 $hGUI = GUICreate("GuiFlatButton Ex0", 275, 120) GUISetBkColor(0x333333) $idLabel = GUICtrlCreateLabel("Click the button", 10, 100, 150, 30) GUICtrlSetColor(-1, 0xFFFFFF) ;create new button then set the background and foreground colors $mybutton1 = GuiFlatButton_Create("Button 1", 78, 20, 120, 40) GuiFlatButton_SetBkColor(-1, 0x5555FF) GuiFlatButton_SetColor(-1, 0xFFFFFF) GUISetState(@SW_SHOW, $hGUI) Local $i = 0 Local $iMsg While 1 $iMsg = GUIGetMsg() Switch $iMsg Case $GUI_EVENT_CLOSE ExitLoop Case $mybutton1 $i += 1 GUICtrlSetData($idLabel, $i) ConsoleWrite($i & @CRLF) EndSwitch Sleep(10) WEnd GUIDelete() EndFunc ;==>Example
      Menu/Toolbar Example

      #include <GUIConstantsEx.au3> #include <MsgBoxConstants.au3> #include "GuiFlatButton.au3" Example() ;Example GUI with toolbar Func Example() Local $hGUI, $idLabel, $aButtons, $iTbSize $hGUI = GUICreate("GuiFlatButton Ex2", 300, 200) GUISetBkColor(0x444444) $idLabel = GUICtrlCreateLabel("Click a button", 10, 180, 150, 30) GUICtrlSetColor(-1, 0xFFFFFF) $aButtons = createToolbar() $iTbSize = UBound($aButtons) GUISetState(@SW_SHOW, $hGUI) Local $i = 0 Local $iMsg While 1 $iMsg = GUIGetMsg() Switch $iMsg Case $GUI_EVENT_CLOSE ExitLoop Case $aButtons[0] To $aButtons[$iTbSize - 1] ConsoleWrite("1") GUICtrlSetData($idLabel, GuiFlatButton_Read($iMsg)) EndSwitch Sleep(10) WEnd GUIDelete() EndFunc ;==>Example Func createToolbar() Local $aButtons[6] Local $bkColor = 0x777777 Local $textColor = 0xFFFFFF Local $borderColor = 0x999999 Local $aBtnClrs[12] = [0x777777, 0xFFFFFF, $GUI_BKCOLOR_TRANSPARENT, 0x888888, 0xFFFFFF, $GUI_BKCOLOR_TRANSPARENT, 0x999999, 0xFFFFFF, $GUI_BKCOLOR_TRANSPARENT, 0x666666, 0xFFFFFF, $GUI_BKCOLOR_TRANSPARENT] For $i = 0 To UBound($aButtons) - 1 $aButtons[$i] = GuiFlatButton_Create("B" & $i, $i * 50, 0, 50, 17) GuiFlatButton_SetColorsEx($aButtons[$i], $aBtnClrs) Next Return $aButtons EndFunc ;==>createToolbar  
      Icon Example
      You can even easily add icons to your buttons -- just create a new button and send it an icon!

      #include <GDIPlus.au3> #include "GuiFlatButton.au3" Example() ;buttons with Icon images Func Example() ;get images for demonstration _GDIPlus_Startup() ;initialize GDI+ Local $hIcon = _WinAPI_ShellExtractIcon(@SystemDir & '\shell32.dll', 258, 24, 24) ;extract the 'Save' icon Local $hBitmap = _GDIPlus_BitmapCreateFromHICON($hIcon) ;Create Bitmap from Icon (for demonstration) Local $hHBitmap = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hBitmap) ;Create HBitmap from Bitmap _GDIPlus_BitmapDispose($hBitmap) ;dispose the bitmap _GDIPlus_Shutdown() ;done with GDI+ Local $hGUI = GUICreate("GuiFlatButton Ex5", 255, 400) GUISetBkColor(0xEEEEEE) ;set default colors of future buttons Local $aColorsEx = _ [0xE2E5E8, 0X000000, 0x888888, _ ; normal : Background, Text, Border 0xE2E5E8, 0X000000, 0x333333, _ ; focus : Background, Text, Border 0xE8E8E8, 0X000000, 0x666666, _ ; hover : Background, Text, Border 0xDDDDDD, 0X000000, 0xAAAAAA] ; selected : Background, Text, Border GuiFlatButton_SetDefaultColorsEx($aColorsEx) ;normal button with icon $label1 = GUICtrlCreateLabel( "$BS_TOOLBUTTON -->", 5, 10) GUICtrlSetBkColor(-1, $GUI_BKCOLOR_TRANSPARENT) Local $mybutton1 = GuiFlatButton_Create("Save", 130, 5, 50, 48, $BS_TOOLBUTTON) _WinAPI_DeleteObject(_SendMessage(GUICtrlGetHandle($mybutton1), $BM_SETIMAGE, $IMAGE_ICON, $hIcon)) ;align top Local $mybuttonT = GuiFlatButton_Create("Top", 5, 65, 120, 55, $BS_TOP) _WinAPI_DeleteObject(_SendMessage(GUICtrlGetHandle($mybuttonT), $BM_SETIMAGE, $IMAGE_ICON, $hIcon)) ;align top-left Local $mybuttonTL = GuiFlatButton_Create("Top-Left", 5, 125, 120, 55, BITOR($BS_TOP, $BS_LEFT)) _WinAPI_DeleteObject(_SendMessage(GUICtrlGetHandle($mybuttonTL), $BM_SETIMAGE, $IMAGE_ICON, $hIcon)) ;align top-right Local $mybuttonTR = GuiFlatButton_Create("Top-Right", 5, 185, 120, 55, BITOR($BS_TOP, $BS_RIGHT)) _WinAPI_DeleteObject(_SendMessage(GUICtrlGetHandle($mybuttonTR), $BM_SETIMAGE, $IMAGE_ICON, $hIcon)) ;align left Local $mybuttonL = GuiFlatButton_Create("Left", 5, 245, 120, 55, $BS_LEFT) _WinAPI_DeleteObject(_SendMessage(GUICtrlGetHandle($mybuttonL), $BM_SETIMAGE, $IMAGE_ICON, $hIcon)) ;align bottom Local $mybuttonB = GuiFlatButton_Create("Bottom", 130, 65, 120, 55, $BS_BOTTOM) _WinAPI_DeleteObject(_SendMessage(GUICtrlGetHandle($mybuttonB), $BM_SETIMAGE, $IMAGE_ICON, $hIcon)) ;align bottom-left Local $mybuttonBL = GuiFlatButton_Create("Bottom-Left", 130, 125, 120, 55, BITOR($BS_BOTTOM, $BS_LEFT)) _WinAPI_DeleteObject(_SendMessage(GUICtrlGetHandle($mybuttonBL), $BM_SETIMAGE, $IMAGE_ICON, $hIcon)) ;align bottom-right Local $mybuttonBR = GuiFlatButton_Create("Bottom-Right", 130, 185, 120, 55, BITOR($BS_BOTTOM, $BS_RIGHT)) _WinAPI_DeleteObject(_SendMessage(GUICtrlGetHandle($mybuttonBR), $BM_SETIMAGE, $IMAGE_ICON, $hIcon)) ;align right Local $mybuttonR = GuiFlatButton_Create("Right", 130, 245, 120, 55, $BS_RIGHT) _WinAPI_DeleteObject(_SendMessage(GUICtrlGetHandle($mybuttonR), $BM_SETIMAGE, $IMAGE_ICON, $hIcon)) GuiFlatButton_SetState($mybuttonR, $GUI_DISABLE ) ;disabled Local $mybuttonDisable = GuiFlatButton_Create("Disabled", 130, 310, 120, 55, $BS_TOOLBUTTON) _WinAPI_DeleteObject(_SendMessage(GUICtrlGetHandle($mybuttonDisable), $BM_SETIMAGE, $IMAGE_BITMAP, $hHBitmap)) GuiFlatButton_SetState($mybuttonDisable, $GUI_DISABLE ) ;clean up! _WinAPI_DestroyIcon( $hIcon ) _WinAPI_DeleteObject( $hHBitmap ) GUISetState(@SW_SHOW, $hGUI) Local $iMsg While 1 $iMsg = GUIGetMsg() Switch $iMsg Case $GUI_EVENT_CLOSE ExitLoop EndSwitch Sleep(10) WEnd GUIDelete() EndFunc ;==>Example  
      I'm sure there are some use-cases I've forgotten, so feedback is welcome!
       
      Download the latest UDF and several more examples: GuiFlatButton20210102.zip
      Update 2021-01-02
      Fixed bug, not drawing correctly after deleting GUI with GUIDelete()
      Fixed bug, changing default colors changed all buttons, even previously created buttons
      Made some internal functions more efficient
      Update 2019-04-14 GuiFlatButton_20190414.zip
      Fixed bug, not showing pressed down state when clicking rapidly
      Added Icon/Bitmap support!
      Added function GuiFlatButton_SetPos to change the position and/or size of a button
      Update 2019-02-09
      Added 2 new functions to set the button colors globally for all future buttons.
      GuiFlatButton_SetDefaultColors 
      GuiFlatButton_SetDefaultColorsEx

      Credits to:
      Melba23 (UDF template)
      LarsJ (general subclassing code)
      4ggr35510n (TrackMouseEvent example)
      binhnx (disable dragging with $WS_EX_CONTROLPARENT)
      GUIRegisterMsg in AutoIt Help (owner-draw button example)
      funkey (_WinAPI_DrawState example)
    • By mLipok
      This UDF was created for give any/some kind of support for GDPR solutions in AutoIt.
      This is a modest attempt at implementation.
       
      More details in support topic:
       
    • By mLipok
      This UDF was created for give any kind of support for GDPR solutions in AutoIt.
       
      #include "GDPR.au3" #AutoIt3Wrapper_Run_AU3Check=Y #AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 -w 7 #Tidy_Parameters=/sort_funcs /reel ; #AutoIt3Wrapper_Run_Debug_Mode=Y _Example() Func _Example() _GDPR_Crypter_Wrapper(_Example_Crypter) Local $sText = 'AutoIt v3 is a freeware BASIC-like scripting language designed for automating the Windows GUI and general scripting.' MsgBox(0, @ScriptLineNumber, _GDPR_Anonymize_String($sText)) Local $dCrypted = _GDPR_Crypt_String($sText) MsgBox(0, @ScriptLineNumber, $dCrypted & @CRLF & @error & @CRLF & @extended) Local $sDecrypted = _GDPR_DeCrypt_AsString($dCrypted) MsgBox(0, @ScriptLineNumber, $sDecrypted & @CRLF & @error & @CRLF & @extended) _GDPR_Crypt_File(@ScriptFullPath, @ScriptFullPath & '.CRYPTED') If @error Then ConsoleWrite('! ---> @error=' & @error & ' @extended=' & @extended & ' : _GDPR_Crypt_File' & @CRLF) _GDPR_DeCrypt_File(@ScriptFullPath & '.CRYPTED', @ScriptFullPath & '.DECRYPTED.au3') If @error Then ConsoleWrite('! ---> @error=' & @error & ' @extended=' & @extended & ' : _GDPR_DeCrypt_File' & @CRLF) EndFunc ;==>_Example Func _Example_Crypter($dBinaryData, $bDataAlreadyEncrypted) _Crypt_Startup() ; Start the Crypt library. Local $dResult If $bDataAlreadyEncrypted Then $dResult = _Crypt_DecryptData($dBinaryData, 'securepassword', $CALG_3DES) ; Decrypt the data using the generic password string. The return value is a binary string. Else $dResult = _Crypt_EncryptData($dBinaryData, 'securepassword', $CALG_3DES) ; Encrypt the text with the new cryptographic key. EndIf _Crypt_Shutdown() ; Shutdown the Crypt library. Return $dResult EndFunc ;==>_Example_Crypter  
      Download link:
       
      WIKI:
      This UDF was added here:  https://www.autoitscript.com/wiki/User_Defined_Functions
       
       
    • By mLipok
      This UDF was created to facilitate the saving and reading of email configuration.
      Thanks to @water, @jchd, @Jos for helping in translation of _EmailConfig_GUI_Preset_**()
      Hope to have _EmailConfig_GUI_Preset_ES() version soon.

      If you want to create your national version of _EmailConfig_GUI_Preset_**() please do not hesitate ... contribute.
      _EmailConfig_GUI_Preset_EN() is translated by me and Google Translator (from my national Polish language), so if you have any fix for this please do not hesitate ... contribute.
       
      The EmailConfig_Example_STMP_Mailer.au3   is using modified version of Jos SMTP Mailer UDF
       
      #AutoIt3Wrapper_UseX64=N #AutoIt3Wrapper_Run_AU3Check=Y #AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 -w 7 #Tidy_Parameters=/sort_funcs /reel #include <Array.au3> #include <AutoItConstants.au3> #include <ButtonConstants.au3> #include <ComboConstants.au3> #include <Crypt.au3> #include <EditConstants.au3> #include <File.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include "EmailConfig.au3" #include "GDPR.au3" ; https://www.autoitscript.com/forum/files/file/509-gdpr/ Global $oMyRet[2] #Region - EXAMPLE _MY_EXAMPLE__EmailConfig() Func _MY_EXAMPLE__EmailConfig() _GDPR_Crypter_Wrapper(_EmailConfig_ExampleCrypter) _EmailConfig_GUI_Preset_EN() ;~ _EmailConfig_GUI_Preset_DE() ;~ _EmailConfig_GUI_Preset_FR() ;~ _EmailConfig_GUI_Preset_NL() ;~ _EmailConfig_GUI_Preset_PL() _EmailConfig_SaveWrapper(_EmailConfig_SaveToINI) _EmailConfig_LoadWrapper(_EmailConfig_LoadFromINI) _EmailConfig_LoadWrapper() If $IDYES = MsgBox($MB_YESNO + $MB_TOPMOST + $MB_ICONQUESTION + $MB_DEFBUTTON1, 'Question #' & @ScriptLineNumber, _ 'Do you want to set email configuration ?') Then _EmailConfig_ShowGUI() EndIf Local $s_ToAddress = 'whereisyourdestination@your.email.com' Local $s_Subject = 'Testing email sending : ' & @YEAR & @MON & @MDAY & ' ' & @HOUR & @MIN & @SEC Local $s_Body = 'This is only a test' Local $s_Attachments = '' _SMTP_SendEmail_Example($s_ToAddress, $s_Subject, $s_Body, $s_Attachments) EndFunc ;==>_MY_EXAMPLE__EmailConfig Func _EmailConfig_ExampleCrypter($dBinaryData, $bDataAlreadyEncrypted) _Crypt_Startup() ; Start the Crypt library. Local $dResult If $bDataAlreadyEncrypted Then $dResult = _Crypt_DecryptData($dBinaryData, 'securepassword', $CALG_AES_256) ; Decrypt the data using the generic password string. The return value is a binary string. Else $dResult = _Crypt_EncryptData($dBinaryData, 'securepassword', $CALG_AES_256) ; Encrypt the text with the new cryptographic key. EndIf _Crypt_Shutdown() ; Shutdown the Crypt library. Return $dResult EndFunc ;==>_EmailConfig_ExampleCrypter #EndRegion - EXAMPLE ; ; The UDF Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance = "Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0, $tls = 0) Local $oCOM_Error_Handler = ObjEvent("AutoIt.Error", "MyErrFunc") #forceref $oCOM_Error_Handler Local $objEmail = ObjCreate("CDO.Message") $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>' $objEmail.To = $s_ToAddress Local $i_Error = 0 #forceref $i_Error Local $i_Error_desciption = "" #forceref $i_Error_desciption If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress $objEmail.Subject = $s_Subject If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then $objEmail.HTMLBody = $as_Body Else $objEmail.Textbody = $as_Body & @CRLF EndIf If $s_AttachFiles <> "" Then Local $S_Files2Attach = StringSplit($s_AttachFiles, ";") For $x = 1 To $S_Files2Attach[0] $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x]) ;~ ConsoleWrite('@@ Debug : $S_Files2Attach[$x] = ' & $S_Files2Attach[$x] & @LF & '>Error code: ' & @error & @LF) ;### Debug Console If FileExists($S_Files2Attach[$x]) Then ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF) $objEmail.AddAttachment($S_Files2Attach[$x]) Else ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF) SetError(1) Return 0 EndIf Next EndIf $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2 $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer If Number($IPPort) = 0 Then $IPPort = 25 $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort ; Authenticated SMTP If $s_Username <> "" Then $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password EndIf ; Set security params If $ssl Then $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True If $tls Then $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendtls") = True ; Update settings $objEmail.Configuration.Fields.Update ; Set Email Importance Switch $s_Importance Case "High" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "High" Case "Normal" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Normal" Case "Low" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Low" EndSwitch $objEmail.Fields.Update ; Sent the Message $objEmail.Send If @error Then SetError(2) Return $oMyRet[1] EndIf $objEmail = "" EndFunc ;==>_INetSmtpMailCom Func _SMTP_SendEmail_Example($s_ToAddress, $s_Subject, $s_Body, $s_Attachments) #Tidy_ILC_Pos=120 Local $aEMAIL_CONFIG = __EmailConfig__API() Local $SmtpServer = $aEMAIL_CONFIG[$EMAIL_CONFIG__22__SMTP_SERVER_NAME][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; address for the smtp-server to use - REQUIRED Local $FromName = $aEMAIL_CONFIG[$EMAIL_CONFIG__02__COMMON_NAME][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; name from who the email was sent Local $FromAddress = $aEMAIL_CONFIG[$EMAIL_CONFIG__03__EMAIL_ADDRESS][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; address from where the mail should come Local $ToAddress = $s_ToAddress ; destination address of the email - REQUIRED Local $Subject = $s_Subject ; subject from the email - can be anything you want it to be Local $Body = $s_Body ; the messagebody from the mail - can be left blank but then you get a blank mail Local $AttachFiles = $s_Attachments ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed Local $CcAddress = "" ; address for cc - leave blank if not needed Local $BccAddress = "" ; address for bcc - leave blank if not needed Local $Importance = "Normal" ; Send message priority: "High", "Normal", "Low" Local $Username = $aEMAIL_CONFIG[$EMAIL_CONFIG__20__SMTP_USER_NAME][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; username for the account used from where the mail gets sent - REQUIRED Local $Password = $aEMAIL_CONFIG[$EMAIL_CONFIG__21__SMTP_PASSWORD][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; password for the account used from where the mail gets sent - REQUIRED Local $IPPort = $aEMAIL_CONFIG[$EMAIL_CONFIG__23__SMTP_PORT_NUMBER][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; port used for sending the mail ; in many country port 25 is not recomended, in such case use 587 instead Local $ssl = 0 ; enables/disables secure socket layer sending - put to 1 if using httpS Local $tls = 0 ; enables/disables TLS when required ;~ Local $IPPort = 465 ; GMAIL port used for sending the mail ;~ Local $ssl = 1 ; GMAIL enables/disables secure socket layer sending - put to 1 if using httpS Local $rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl, $tls) If @error Then MsgBox(0, "Error sending email", "Error code: " & @error & @CRLF & "Description: " & $rc) EndIf EndFunc ;==>_SMTP_SendEmail_Example ; ; ; Com Error Handler Func MyErrFunc(ByRef $oMyError) Local $HexNumber = Hex($oMyError.number, 8) $oMyRet[0] = $HexNumber $oMyRet[1] = StringStripWS($oMyError.description, 3) ConsoleWrite("### COM Error ! Number: " & $HexNumber & " ScriptLine: " & $oMyError.scriptline & " Description:" & $oMyRet[1] & @LF) SetError(1) ; something to check for when this function returns Return EndFunc ;==>MyErrFunc  

       
      EmailConfig.au3 EmailConfig_Example_STMP_Mailer.au3
×
×
  • Create New...