Jump to content
Sign in to follow this  
NeverDUN

Help with GUI script needed.

Recommended Posts

Ok so thus far the script does what it's suppose to do.. to a point. 

There are two complications and they are as follows:

  • There is suppose to be ONE GUI that opens up.

When i run the script it opens, but when i close it another identical one opens behind it.

  • When i click save on the first GUI it saves like it's supposed too.

BUT when i close it and reopen it, it's suppose to open with the info that was saved.

I'm no pro coder, maybe it's something very small i'm not getting.

Some help would be highly appreciated.

Yea.. i have it saving alot :3

#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <MsgBoxConstants.au3>
#include <GUIConstantsEx.au3>
#include <GuiStatusBar.au3>
#include <ProgressConstants.au3>
#include <WindowsConstants.au3>


Do
    $pass = InputBox("Enter Password", "Please enter the password", "", "*", 150, 120)
    If $pass <> "Password" Then
    EndIf
    If (@error == 1) Then Exit ;
Until $pass == "123"
MsgBox(0, "Success", "Correct password" & @CRLF & "")

Global $sConfigPath = @ScriptDir & "\Settings.ini"

ProgressOn("Title", "Loading program", "Loading...")

For $i = 0 To 100
    ProgressSet($i)
    Sleep(5)
Next

ProgressSet(50, "Half Way.")
Sleep(250)

ProgressSet(100, "Done!")
Sleep(750)
ProgressOff()

#Region ### START Koda GUI section ### Form=
$Form1 = GUICreate("Title", 610, 477, 206, 143)
$Input1 = GUICtrlCreateInput("Date", 480, 16, 113, 21)
$Input2 = GUICtrlCreateInput("Title", 16, 56, 577, 21)
$Edit1 = GUICtrlCreateEdit("", 16, 80, 577, 329)
$Button1 = GUICtrlCreateButton("Save", 520, 424, 75, 25, $BS_DEFPUSHBUTTON)
$idProgressbar1 = GUICtrlCreateProgress(16, 424, 454, 17)
$StatusBar1 = _GUICtrlStatusBar_Create($Form1)
GUICtrlSetColor(-1, 32250)
GUISetState(@SW_SHOW)

Local $iWait = 20; wait 20ms for next progressstep
Local $iSavPos = 0; progressbar-saveposition

Local $idMsg, $idM
; Loop until the user exits.
Do
    $idMsg = GUIGetMsg()
    If $idMsg = $Button1 Then
        GUICtrlSetData($Button1, "Stop")
        For $i = $iSavPos To 100
            If GUICtrlRead($idProgressbar1) = 50 Then MsgBox($MB_SYSTEMMODAL, "Info", "half is done...", 1)
            $idM = GUIGetMsg()

            If $idM = -3 Then ExitLoop

            If $idM = $Button1 Then
                GUICtrlSetData($Button1, "Next")
                $iSavPos = $i;save the current bar-position to $iSavPos
                ExitLoop
            Else
                $iSavPos = 0
                GUICtrlSetData($idProgressbar1, $i)
                Sleep($iWait)
            EndIf
        Next
        If $i > 100 Then
            ;       $iSavPos=0
            GUICtrlSetData($Button1, "Click")
        EndIf

        If GUICtrlSetData($Button1, "Click") Then
            IniWrite($sConfigPath, "Date", "Input1", GUICtrlRead($Input1))
            IniWrite($sConfigPath, "Title", "Input2", GUICtrlRead($Input2))
            IniWrite($sConfigPath, "Edit", "Edit1", GUICtrlRead($Edit1))
        EndIf

        If IniWrite($sConfigPath, "Edit", "Edit1", GUICtrlRead($Edit1)) Then
            GUICtrlSetData($Button1, "Done")
        EndIf
    EndIf
Until $idMsg = $GUI_EVENT_CLOSE



GUICtrlSetData($Input1, IniRead($sConfigPath, "Date", "Input1", "Date"))
GUICtrlSetData($Input2, IniRead($sConfigPath, "Title", "Input2", "Title"))
GUICtrlSetData($Edit1, IniRead($sConfigPath, "Edit", "Edit1", "Start writing..."))



While 1
    $idMsg = GUIGetMsg()

    Switch $idMsg
        Case $GUI_EVENT_CLOSE
            ; Note: Exit needs to be changed to ExitLoop
            ; for any code after the loop to execute.
            ExitLoop
    EndSwitch

    If $idMsg = $GUI_EVENT_CLOSE Then ExitLoop
    If $idMsg = $Button1 Then SendMyData()
WEnd

Func Button1Click()
    IniWrite($sConfigPath, "Date", "Input1", GUICtrlRead($Input1))
    IniWrite($sConfigPath, "Title", "Input2", GUICtrlRead($Input2))
    IniWrite($sConfigPath, "Edit", "Edit1", GUICtrlRead($Edit1))
EndFunc   ;==>Button1Click

IniWrite($sConfigPath, "Date", "Input1", GUICtrlRead($Input1))
IniWrite($sConfigPath, "Title", "Input2", GUICtrlRead($Input2))
IniWrite($sConfigPath, "Edit", "Edit1", GUICtrlRead($Edit1))

Func SendMyData()
    FileDelete('Settings.ini')
    $data = "[General]" & @CRLF & GUICtrlRead($Input2) & @CRLF & @CRLF & GUICtrlRead($Edit1)
    FileWrite('\Settings.ini', $data)
    MsgBox(0, 'Info', 'Data saved')
EndFunc   ;==>SendMyData
#EndRegion ### END Koda GUI section ###
Edited by NeverDUN

Share this post


Link to post
Share on other sites

Your program is so simple, progress bars are not necessary. The Do/Until loop is overly complicated. Also, near the end of the program, I see you were deleting the INI file and using FileWrite to write to it. That is very inefficient. I'm posting some simple code that does what you need. Perhaps it can help you see a better way:

#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <MsgBoxConstants.au3>
#include <GUIConstantsEx.au3>
#include <GuiStatusBar.au3>
#include <ProgressConstants.au3>
#include <WindowsConstants.au3>

Do
    $pass = InputBox("Enter Password", "Please enter the password", "", "*", 150, 120)
    If $pass <> "Password" Then
    EndIf
    If (@error == 1) Then Exit ;
Until $pass == "123"
MsgBox(0, "Success", "Correct password" & @CRLF & "")

Global $sConfigPath = @ScriptDir & "\Settings.ini"

$Form1 = GUICreate("Title", 610, 477, 206, 143)
$Input1 = GUICtrlCreateInput("Date", 480, 16, 113, 21)
$Input2 = GUICtrlCreateInput("Title", 16, 56, 577, 21)
$Edit1 = GUICtrlCreateEdit("", 16, 80, 577, 329)
$Button1 = GUICtrlCreateButton("Save", 520, 424, 75, 25, $BS_DEFPUSHBUTTON)
$StatusBar1 = _GUICtrlStatusBar_Create($Form1)
GUICtrlSetColor(-1, 32250)
GUISetState(@SW_SHOW)

$dateRead = IniRead($sConfigPath, "Date", "Input1", "")
$titleRead = IniRead($sConfigPath, "Title", "Input2", "")
$editRead = IniRead($sConfigPath, "Edit", "Edit1", "")
GUICtrlSetData($Input1, $dateRead)
GUICtrlSetData($Input2, $titleRead)
GUICtrlSetData($Edit1, $editRead)

While 1
    $idMsg = GUIGetMsg()
    Switch $idMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $Button1
            If GUICtrlRead($Button1) = "Save" Then
                IniWrite($sConfigPath, "Date", "Input1", GUICtrlRead($Input1))
                IniWrite($sConfigPath, "Title", "Input2", GUICtrlRead($Input2))
                IniWrite($sConfigPath, "Edit", "Edit1", GUICtrlRead($Edit1))
                GUICtrlSetData($Button1, "Done")
            ElseIf GUICtrlRead($Button1) = "Done" Then
                Exit
            EndIf
    EndSwitch
WEnd
Edited by abberration

RAID Calculator | Software Installer

The truth has been suppressed since the dawn of time.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Rskm
      Hi, recently i created a GUI for some calculations in AutoIT.  The GUI has 2 tabs and on the first tab, it has few inputboxes where i use to click with mouse and start entering the inputs. i recently made some changes in the position of these textboxes. I made this by changing the autoit code file instead of making changes in KODA. Now i cannot click inside these textboxes with mouse. However, i can use TAB key to cycle through/enter input in these input boxes. what could have made the inputboxes not responding to mouseclicks. thanks
    • By TheDcoder
      Hi everyone,
      I am bit stumped as to why I am not able to set the time in the Date control
      #include <DateTimeConstants.au3> #include <GUIConstantsEx.au3> #include <MsgBoxConstants.au3> Example() Func Example() GUICreate("My GUI get date", 200, 200, 800, 200) Local $idDate = GUICtrlCreateDate("1953/04/25", 10, 10, 185, 20, $DTS_TIMEFORMAT) ; to select a specific default format Local $sStyle = "HH:mm:ss" GUICtrlSendMsg($idDate, $DTM_SETFORMATW, 0, $sStyle) ; Set time Local $iRet = GUICtrlSetData($idDate, '13:33:37') ConsoleWrite('GUICtrlSetData returned ' & ($iRet = 1 ? 'success' : 'failure') & @CRLF) GUISetState(@SW_SHOW) ; Loop until the user exits. While GUIGetMsg() <> $GUI_EVENT_CLOSE WEnd MsgBox($MB_SYSTEMMODAL, "Time", GUICtrlRead($idDate)) EndFunc ;==>Example The documentation for GUICtrlSetData clearly mentions that it uses the same format as GUICtrlRead:
      But I get failure
      What gives?
      Thanks for the help in advance!
    • By thedemons
      Introduction
      ImGui is a popular library written by ocornut, it can make awesome user interface based on directx. It is being used by many big apps/games.  The UI is nice and flexible, easy to use because of frame-by-frame drawing. So I decided to convert the entire ImGui library to AutoIt
      At first it's just an experiment, i converted some basic draw functions of imgui, compile to a dll, then using DllCall in autoit to call the functions. I was testing to see how much FPS i can get in autoit, and i was expected a low FPS, since autoit is slow. Suprisingly, the FPS turned out to be so high, it works really fast, even when drawing 1000 buttons at the same time. Features
      More than +270 functions converted from ImGui (compiled dll). Has 90% of the capability of what you can do in C++; Usable ImGuiIO and ImGuiStyle, so you can set whatever configurations you like. Preview
          
      Usage
      #include <WinAPI.au3> #include "ImGui.au3" ; Create a window Local $hwnd = _ImGui_GUICreate("AutoIt ImGui", 1024, 768) _WinAPI_ShowWindow($hwnd) ; Set style color _ImGui_StyleColorsLight() ;~ _ImGui_StyleColorsDark() Local $f_value = 5 While 1 ; when the user click close button on the window, this will return false if Not _ImGui_PeekMsg() Then Exit ; must call _ImGui_BeginFrame() _ImGui_Begin("Another window") _ImGui_Text("Hello there..") If _ImGui_Button("click me") Then $f_value = 5 _ImGui_SliderFloat("slider", $f_value, 2, 20) If _ImGui_IsItemHovered() Then _ImGui_ToolTip("what r u doing?") _ImGui_End() ; must call _ImGui_EndFrame() Wend  
      Remark
      Most of the functions were converted automatically. I haven't tested all of them yet, if some function doesn't work for you, please tell me. Still missing some features of ImGui, please tell me if you needed any. Run \tools\imgui-au3-setup.au3 to add _ImGui functions to SciTE auto-complete. Source Code
      Require: DirectX GitHub: imgui-autoit
    • By MesterPerfect
      good morning
      this is the first post here in the autoit forums
      i hope that you can help me in my problem
      i have a JSON encoded
      it a map of my forums
      where i want to make a treeview that have the same type of map
      e.g
      a system (as category)
      windows (as sub category)
      software (as an child item in the windows category)
      .....
      i don't know how to do that
      so, i know that i can do that using the json functions
      but i need your help about how we can do it as the type that i told you
      by the way i need to put the sub info for each item in an array that give me the ability to manage my items
      e.g
      can post thread
      can reply
      message cound ...
      you just give me a small example and i can continue.
      am sorry if this against the rules of the forum.
      but i realy searched a lot but i couldn't
      i hope some one give me the way.
      thank you very much in advance
       
      here is the link of json forum
      https://www.autoitscript.com/forum/topic/148114-a-non-strict-json-udf-jsmn/
      and here is my encoded json file
       
      { "tree_map": { "0": [ 1, 5, 6, 7 ], "1": [ 2 ], "2": [ 4 ], "5": [ 3 ], "6": [ 8 ], "8": [ 9, 10 ] }, "nodes": [ { "breadcrumbs": [], "description": "", "display_in_list": true, "display_order": 1, "node_id": 1, "node_name": null, "node_type_id": "Category", "parent_node_id": 0, "title": "Main category", "type_data": {} }, { "breadcrumbs": [ { "node_id": 1, "title": "Main category", "node_type_id": "Category" } ], "description": "", "display_in_list": true, "display_order": 1, "node_id": 2, "node_name": null, "node_type_id": "Forum", "parent_node_id": 1, "title": "Main forum", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [ { "node_id": 1, "title": "Main category", "node_type_id": "Category" }, { "node_id": 2, "title": "Main forum", "node_type_id": "Forum" } ], "description": "", "display_in_list": true, "display_order": 1, "node_id": 4, "node_name": null, "node_type_id": "Forum", "parent_node_id": 2, "title": "my forums1", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [], "description": "", "display_in_list": true, "display_order": 2, "node_id": 5, "node_name": null, "node_type_id": "Category", "parent_node_id": 0, "title": "Perfect", "type_data": {} }, { "breadcrumbs": [ { "node_id": 5, "title": "Perfect", "node_type_id": "Category" } ], "description": "", "display_in_list": true, "display_order": 2, "node_id": 3, "node_name": null, "node_type_id": "Forum", "parent_node_id": 5, "title": "ahmed", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [], "description": "", "display_in_list": true, "display_order": 3, "node_id": 6, "node_name": null, "node_type_id": "Forum", "parent_node_id": 0, "title": "autoit", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [ { "node_id": 6, "title": "autoit", "node_type_id": "Forum" } ], "description": "", "display_in_list": true, "display_order": 3, "node_id": 8, "node_name": null, "node_type_id": "Forum", "parent_node_id": 6, "title": "examples", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [ { "node_id": 6, "title": "autoit", "node_type_id": "Forum" }, { "node_id": 8, "title": "examples", "node_type_id": "Forum" } ], "description": "", "display_in_list": true, "display_order": 3, "node_id": 9, "node_name": null, "node_type_id": "Forum", "parent_node_id": 8, "title": "GUI", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [ { "node_id": 6, "title": "autoit", "node_type_id": "Forum" }, { "node_id": 8, "title": "examples", "node_type_id": "Forum" } ], "description": "", "display_in_list": true, "display_order": 31, "node_id": 10, "node_name": null, "node_type_id": "Forum", "parent_node_id": 8, "title": "windowEX", "type_data": { "allow_poll": true, "allow_posting": true, "can_create_thread": true, "can_upload_attachment": true, "discussion_count": 0, "last_post_date": 0, "last_post_id": 0, "last_post_username": "", "last_thread_id": 0, "last_thread_prefix_id": 0, "last_thread_title": "", "message_count": 0, "min_tags": 0, "require_prefix": false } }, { "breadcrumbs": [], "description": "", "display_in_list": true, "display_order": 4, "node_id": 7, "node_name": null, "node_type_id": "Category", "parent_node_id": 0, "title": "vbs", "type_data": {} } ] }  
    • By Tosyk
      Hi,
      Please help me to beat the flashing of input field:
      #include <File.au3> #Include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <ColorConstants.au3> AutoItSetOption("MustDeclareVars", 1) HotKeySet("{ESC}", "Terminate") Local $i Local $sSourceFile, $sDestFileA, $sDestFile3, $sRunWaitA, $sParamsA, $sNewFileNameA, $sFileLogPath, $iFileSize, $ScriptNameWoExt Local $hGUI, $ProgressBar1, $Label, $Progress, $Progress1, $inpVal, $CheckKeepAlpha, $v1, $sNewFileName, $sDestFile, $sParams, $sRunWait, $LabelStatus, $bMover, $cMover, $qMover, $ExtractAlpha, $FlipY, $ExtractBlue Local $sDrive, $sFolder, $sFileName, $sExt ;path to image magick tools Local $sIMConv = 'magick.exe', $sIMPathFull = 'C:\Program Files\ImageMagick\', $sIMPath = FileGetShortName($sIMPathFull & $sIMConv) ;supported input file extensions Local $Exts = "tga|jpg|bmp|dds|png|tif|jpeg", $sPattern = "\.(?i:" & $Exts & ")", $ExtsPreview = " tga | jpg | bmp | dds | png | tif | jpeg " Local $ExtOutput = "jpg", $ExtOutput2 = "png" Local $LogDefaultSize = '70' If Not $CmdLine[0] Then MsgBox($MB_SYSTEMMODAL, "Usage", "Drop " & $ExtsPreview & " file(s)" & @LF & "on " & @ScriptName) ConsoleWrite("Usage: " & @ScriptName & " <file>" & @CRLF) Exit EndIf If $CmdLine[0] <> 0 Then If FileExists($sIMPath) Then ProcessFiles() Else MsgBox(0, $sIMConv & " not found", "File [" & $sIMPathFull & $sIMConv & "] not found" & @CRLF) ConsoleWrite("Download Image Magick: " & $sIMConv & " to use this tool." & @CRLF) EndIf Else MsgBox(0, "Usage", "Drop file(s) on " & @ScriptName) ConsoleWrite("Usage: " & @ScriptName & " <file>" & @CRLF) EndIf Func ProcessFiles() #Region ### START Koda GUI section ### Form= $hGUI = GUICreate("Converting to PNG", 300, 285, -1, -1, BitXOR($GUI_SS_DEFAULT_GUI, $WS_MINIMIZEBOX)) GUISetOnEvent($GUI_EVENT_CLOSE, "Terminate") ;PNG Option group $cMover = 0 Local $Group2 = GUICtrlCreateGroup("Options (PNG):", 8, 5+$cMover, 284, 56) $CheckKeepAlpha = GUICtrlCreateCheckbox("Keep alpha channel", 24, 30+$cMover, 130, 17) $FlipY = GUICtrlCreateCheckbox("Flip Vertical", 160, 30+$cMover, 130, 17) GUICtrlSetState($CheckKeepAlpha, $GUI_CHECKED) ;JPG Quality Input $qMover = 68 Local $Group1 = GUICtrlCreateGroup("Extraction options (JPG):", 8, 5+$qMover, 284, 86) $ExtractAlpha = GUICtrlCreateCheckbox("Extract alpha channel", 24, 28+$qMover, 130, 17) $ExtractBlue = GUICtrlCreateCheckbox("Extract blue channel", 160, 28+$qMover, 130, 17) $inpVal = GUICtrlCreateInput("90", 20, 56+$qMover, 260, 22) GUICtrlSetState($inpVal, $GUI_DISABLE) ;Buttons and bar $bMover = 92 $Label = GUICtrlCreateLabel("Press Convert to proceed", 20, 94+$bMover, 220, 20, $SS_LEFT) $LabelStatus = GUICtrlCreateLabel("Ready", 20, 153+$bMover, 220, 20, $SS_LEFT) $Progress1 = CreateProgress(20, 115+$bMover, 260, 20) Local $Button1 = GUICtrlCreateButton("Convert", 206, 150+$bMover, 75, 25) GUICtrlSetState ($Button1, $GUI_DEFBUTTON) ;Initializer GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Exit Case $ExtractAlpha or $ExtractBlue If _IsChecked($ExtractAlpha) or _IsChecked($ExtractBlue) Then GUICtrlSetState($inpVal, $GUI_ENABLE) Else GUICtrlSetState($inpVal, $GUI_DISABLE) EndIf Case $Button1 GUICtrlSetState($inpVal, $GUI_DISABLE) GUICtrlSetState($CheckKeepAlpha, $GUI_DISABLE) GUICtrlSetState($Button1, $GUI_DISABLE) MainLoop() ExitLoop Case Else ContinueLoop EndSwitch WEnd EndFunc ;==>ProcessFiles Func Settings() If _IsChecked($CheckKeepAlpha) Then $v1 = ' ' Else $v1 = ' ' & '-alpha off' & ' ' EndIf If _IsChecked($ExtractAlpha) Then ;Extracting JPG $sSourceFile = '"' & $sSourceFile & '"' $sNewFileNameA = ($sFileName & '_a.' & $ExtOutput) $sDestFileA = '"' & $sDrive & StringTrimRight($sFolder, 1) & '\' & $sNewFileNameA & '"' $sParamsA = '-channel A -separate -quality' & ' ' & GUICtrlRead($inpVal) & ' ' & '-colorspace sRGB' $sRunWaitA = $sIMPath & " " & $sSourceFile & " " & $sParamsA & " " & $sDestFileA EndIf ;Converting PNG $sNewFileName = ($sFileName & '.' & $ExtOutput2) $sDestFile = '"' & $sDrive & StringTrimRight($sFolder, 1) & '\' & $sNewFileName & '"' $sDestFile3 = $sDrive & StringTrimRight($sFolder, 1) & '\' & $sNewFileName $sParams = $v1 & '-colorspace sRGB' $sRunWait = $sIMPath & " " & $sSourceFile & " " & $sParams & " " & $sDestFile EndFunc ;==>Settings Func MainLoop() WriteLogFile() ConsoleWrite("File Log Path: " & $sFileLogPath & @LF) For $i = 1 To $CmdLine[0] $sSourceFile = $CmdLine[$i] _PathSplit($sSourceFile, $sDrive, $sFolder, $sFileName, $sExt) GUICtrlSetData($ProgressBar1, ($i / $CmdLine[0]) * 100) UpdateProgress($Progress1, ($i / $CmdLine[0]) * 100) GUICtrlSetData($Label, $sFileName & $sExt) GUICtrlSetState($LabelStatus, $GUI_ENABLE) GUICtrlSetColor($LabelStatus, $COLOR_BLACK) GUICtrlSetData($LabelStatus, 'Converting') Sleep(20) If StringRegExp($sExt, "\A" & $sPattern & "\z", 0) = 1 Then If FileExists($sSourceFile) Then Settings() ; function of settings ConsoleWrite("Full converting path: " & $sRunWaitA & @LF) If _IsChecked($ExtractAlpha) Then RunWait(@ComSpec & ' /c ' & $sRunWaitA, '', @SW_HIDE) EndIf RunWait(@ComSpec & ' /c ' & $sRunWait, '', @SW_HIDE) Else ConsoleWriteError("File [" & $sSourceFile & "] not found" & @CRLF) EndIf If FileExists($sDestFile3) Then LabelAnim(' .') LabelAnim(' . .') LabelAnim(' . . .') LabelAnim(' . . . OK') Sleep(20) Else LabelAnim(' .') LabelAnim(' . .') LabelAnim(' . . .') GUICtrlSetColor($LabelStatus, $COLOR_RED) LabelAnim(' . . . ERROR') UpdateLogFile() EndIf Else ; MsgBox(0, "Wrong extension", "Extension of file [" & $sFileName & "] is [" & $sExt & "] and not in" & @LF & "[" & $ExtsPreview & "]" & @CRLF) ConsoleWriteError("Extension of file [" & $sSourceFile & "] is [" & $sExt & "] and not in [" & $sPattern & "]" & @CRLF) ; Terminate() LabelAnim(' .') LabelAnim(' . .') LabelAnim(' . . .') GUICtrlSetColor($LabelStatus, $COLOR_RED) LabelAnim(' . . . Wrong Extension') UpdateLogFile() EndIf Next ; Retrieve the file size (in bytes) $iFileSize = FileGetSize($sFileLogPath) ConsoleWrite("FileLog size: " & $iFileSize & @LF) If $iFileSize < $LogDefaultSize Then FileDelete($sFileLogPath) ElseIf $iFileSize > $LogDefaultSize Then FileMove($sFileLogPath, @WorkingDir, $FC_OVERWRITE) EndIf GUICtrlSetData($Label, "Converting complete") Sleep(10) EndFunc ;==>MainLoop Func LabelAnim($Result) GUICtrlSetData($LabelStatus, 'Converting' & $Result) Sleep(12) EndFunc Func RemoveExt($Input) Local $ExtArray = StringSplit($Input, ".") Return StringReplace($Input, "." & $ExtArray[$ExtArray[0]], "", -1) EndFunc Func GetFileName($Input) Local $PathArray = StringSplit($Input, "\/") Return $PathArray[$PathArray[0]] EndFunc ;--------------------------------------------------------------- ;- Creating file in @tempdir ;--------------------------------------------------------------- Func WriteLogFile() ; Create a constant variable in Local scope of the filepath that will be read/written to. $ScriptNameWoExt = RemoveExt(GetFileName(@ScriptName)) $sFileLogPath = (@TempDir & '\' & '_' & $ScriptNameWoExt & '_errorlog_' & @YEAR & '_' & @MON & '_' & @MDAY & '_' & @HOUR & '_' & @MIN & '_' & @SEC & '_.txt') If FileExists($sFileLogPath) Then FileDelete($sFileLogPath) EndIf ; Create a temporary file to write data to. If Not FileWrite($sFileLogPath, "ImageMagick converter (" & $sIMConv & ") can't convert these files:" & @CRLF) Then MsgBox($MB_SYSTEMMODAL, "", "An error occurred whilst writing the temporary file.") Return False EndIf EndFunc ;--------------------------------------------------------------- ;- Update log file in @tempdir ;--------------------------------------------------------------- Func UpdateLogFile() ; Open the file for writing (append to the end of a file) and store the handle to a variable. Local $hFileOpen = FileOpen($sFileLogPath, $FO_APPEND) If $hFileOpen = -1 Then MsgBox($MB_SYSTEMMODAL, "", "An error occurred whilst writing the temporary file.") Return False EndIf ; Write data to the file using the handle returned by FileOpen. FileWriteLine($hFileOpen, ($sFileName & $sExt)) Sleep(20) ; Close the handle returned by FileOpen. FileClose($hFileOpen) EndFunc ;--------------------------------------------------------------- ;- Enhanced Progress widget ;--------------------------------------------------------------- Func CreateProgress($x, $y, $w, $h, $Label="") Dim $Progress[2] $Progress[0] = GuiCtrlCreateProgress($x, $y, $w, $h) ; this is progress bar $Progress[1] = GuiCtrlCreateLabel("---", $x+0, $y-21, '', '', $SS_RIGHT) ; this is percentage label GUICtrlSetFont($Progress[1], 11, 500, 0, "") GUICtrlSetBkColor($Progress[1], $GUI_BKCOLOR_TRANSPARENT) Return $Progress EndFunc Func UpdateProgress($ProgressID, $Percent, $Label="") GUICtrlSetData($ProgressID[0], $Percent) GUICtrlSetData($ProgressID[1], $Label & Round($Percent, 1) & "%") EndFunc Func _IsChecked($idControlID) Return BitAND(GUICtrlRead($idControlID), $GUI_CHECKED) = $GUI_CHECKED EndFunc ;==>_IsChecked Func Terminate() If WinGetHandle('') <> $hGUI Then HotKeySet('{ESC}') Send('{ESC}') HotKeySet('{ESC}', '_Close') Return EndIf GUIDelete() Exit EndFunc ;==>Terminate Exit(0) the problem caused by this area:
      Case $ExtractAlpha or $ExtractBlue If _IsChecked($ExtractAlpha) or _IsChecked($ExtractBlue) Then GUICtrlSetState($inpVal, $GUI_ENABLE) Else GUICtrlSetState($inpVal, $GUI_DISABLE) EndIf if I remove "or $ExtractBlue" and "or _IsChecked($ExtractBlue)" the input field is not flashing.
      p.s.: also my button don't work if I use OR for the "Case" condition.
×
×
  • Create New...