Jump to content
Alexxander

AutoIt3Help.exe is a virus !

Recommended Posts

Alexxander

Today i installed the latest v3.3.14.0

after a clean windows install ,during the installation of autoit  my eset nod found a virus in

C:\Program Files (x86)\AutoIt3\AutoIt3Help.exe

here is the online scan

https://www.virustotal.com/en/file/b25d575ebd36301b0e12940f01d53a922148d1471f832aeb327d1e78741d7f31/analysis/

i believe this is a false positive, but we need a prove , then we could fix this

this is the first time my AV find a virus in autoit, i had been using autoit and eset fro more than 3 years , any one had the same issue ?


Share this post


Link to post
Share on other sites
reb

I did also. McAffe quarantined it.  I just turned off the live scan and  turned off the internet then re installed. then reactivated McAffe and  excluded the file in real time scan.  I just trust Autoit to not do anything like that.

Edited by reb

MEASURE TWICE - CUT ONCE

Share this post


Link to post
Share on other sites
lorenkinzel

Please look into topic #1 in general help & support.

Re: " i believe this is a false positive, but we need a prove , then we could fix this"

You can prove dirty. You cannot prove clean.

Share this post


Link to post
Share on other sites
RaiNote

If it annoys you that much delete it ^-^ and use mine Virustotal 0/55 and if it means it get's to a virus or trojan scan your complete computer. Maybe something is infecting it.

-Malwarebytes

But mine is not like yours 1.0.0.7 it is 1.0.0.6 ^^

It looks really like there is something defect with 1.0.0.7.

 

I hope i could help anyway

AutoIt3Help.exe

Edited by RaiNote

  • C++/AutoIt/OpenGL Easy Coder
  • I will be Kind to you and try to help you
  • till what you want isn't against the Forum
  • Rules~

 

Share this post


Link to post
Share on other sites
Jos

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • SharpDressedMan
      By SharpDressedMan
      Hello,
      Is there any way to check for validity of a pointer to a DllStruct ?
      In the above code, a DllStruct is created from an invalid pointer. How to prevent from doing this ?
      local $tStruct = DllStructCreate("int i") DllStructSetData($tStruct, "i", 123) local $pStruct = DllStructGetPtr($tStruct) $tStruct = 0 ; destroy DllStruct ==> $pStruct becomes invalid ; how to check here for validity of $pStruct and prevent from doing the following ? $tStruct = DllStructCreate("int i", $pStruct) ; create DllStruct from invalid pointer... MsgBox(0, @ScriptName, @error) ; displays '0' : invalid pointer is not detected by DllStructCreate() MsgBox(0, @ScriptName, IsDllStruct($tStruct)) ; displays '1' : tStruct is assumed as a valid DllStruct object, which is not Thanks for help
    • nooneclose
      By nooneclose
      I need to send a string of text to this popup and click on the ok button to save it.
      Here is the code I have so far:
      ;Start IE Sleep(7000) $oIE = _IECreate("http://www.google.com") Sleep(500) _IELoadWait($oIE) $hIE = _IEPropertyGet($oIE, "hwnd") ; Get Handle of the IE window Sleep(500) WinSetState($hIE, "", @SW_MAXIMIZE) ;Wait for a browser page load to complete Sleep(3000) _IENavigate($oIE, "https://properURL.com") Sleep(8000) _IELoadWait($oIE) ;Attach to a browser control embedded in another window $oIE = _IEAttach("https://"properURL.com", url") ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : $oIE = ' & $oIE & @CRLF & '>Error code: ' & @error & ' Extended code: 0x' & Hex(@extended) & @CRLF) ;### Debug Console Sleep(2000) ;Get the title of the webpage ;Local $wTitle = _IEPropertyGet($oIE, "title") ;MsgBox($MB_SYSTEMMODAL, "Webpage title:", $wTitle) ;Clicks the new button Sleep(3000) _IEAction($nWorkOrderB, "focus") _IEAction($nWorkOrderB, "click") Sleep(5000) ;Store the Element names where the important data will be sent ;Store the long description button Local $wLongDButton = _IEGetObjById($oIE, "m65d795a4-img") ;Store the long Description field id Local $wComments = _IEGetObjById($oIE, "ma6499a9c-rte_iframe") ;Store the ok button id that is in the long description Local $wCommOk = _IEGetObjById($oIE, "m74031266-pb") ;******************************************************************************* ; Send the stored data to the proper field ;******************************************************************************* ;Click the long description button Sleep(300) _IEAction($wLongDButton, "focus") _IEAction($wLongDButton, "click") Sleep(300) ;Sends the Comments Sleep(500) _IEAction($wComments, "focus") _IEAction($wComments, "click") Sleep(500) _IEFormElementSetValue($wComments, "hello darkness my old friend") ;Click the ok button Sleep(500) _IEAction($wCommOk, "focus") _IEAction($wCommOk, "click") Sleep(500)  
      Here is the popup:

    • yasha
      By yasha
      i want am trying to select a nimber to run a program and then select where to save the excel result at before hand
      the problem is that it does not save in the folder i want but the folder before any solutions
      #.................
      $sFolder = ""
          ; Create a constant variable in Local scope of the message to display in FileSelectFolder.
          Local Const $sMessage = "Select a folder"
          ; Display an open dialog to select a file.
          $sFileSelectFolder = FileSelectFolder($sMessage, $sFolder)
          If @error Then
              ; Display the error message.
              MsgBox($MB_SYSTEMMODAL, "", "No folder was selected.")
          Else
              ; Display the selected folder.
              MsgBox($MB_SYSTEMMODAL, "", "You chose the following folder:" & @CRLF & $sFileSelectFolder)
          EndIf
      .......
      ........
      $oExcel = ObjCreate("Excel.Application")                   ; Create an Excel Object
      $oExcel.Visible = 1                                        ; Let Excel show itself
      $oExcel.Workbooks.Open("J:\OPS\OPS_Share\Planners\2 - Weekly Reports\Auto download\"& $YY & $MM & $DD & " ORDER.xls",0)
      $oExcel.ActiveWorkbook.Saveas ( $sFileSelectFolder,""& $YY & $MM & $DD & " ORDER.xlsx", 1)
      $oExcel.ActiveWorkBook.Close
      $oExcel.Quit
      i only want to save it as ddmmyy order inside documents but it saves in libraries as documents ddmmyy order.
    • vynce1982
      By vynce1982
      I am trying to make a simple installer script for my understanding.  I would just like to understand how to deal with multiple possible windows. In the case of installing VLC, I might get a window saying VLC is already installed. I have also tried a switch with no luck.  I would just like to understand some methods for dealing with the possible existence of unexpected windows. 
       
      ;INSTALL VLC VIEWER
      Run(@ScriptDir & '\bin\VLCViewer_2.2.4_3.EXE')
      AutoItSetOption('MouseCoordMode', 0)
      sleep(4000)
      WinWait("VLC Viewer 2.2.4")

           ; this window will pop up if vlc is already installed
          If WinExists( "VLC Viewer 2.2.4", "VLC 2.2.4 Already Installed") Then
                ConsoleWrite ("already installed")
                WinActivate ('VLC Viewer 2.2.4','Already Installed')
                MouseClick ('primary', 93, 83, 1, 0)
                
          EndIf
       
            ; this window will pop up if installer finishes sucessfully
           If WinExists( "VLC Viewer 2.2.4", "VLC Viewer 2.2.4 Installed") Then 
                ConsoleWrite ("already installed")
                WinActivate ('VLC Viewer 2.2.4','VlC Installed')
                MouseClick ('primary', 93, 83, 1, 0)
         EndIf

       
       
       
    • TrashBoat
      By TrashBoat
      After i create my GUI i cant set the color anymore.  help?
      $hBarGUI1 = GUICreate("", 50, 1, 91, 188, 0x80000000, 0x08000080) $g = GUICtrlCreateLabel("", 1, 1, 1, 1) GUICtrlSetBkColor(-1, $color) GUISetBkColor($color, $hBarGUI1) WinSetTrans($hBarGUI1, '', 0) WinSetState($hBarGUI1, '', @SW_SHOWNOACTIVATE) WinMove($hBarGUI1, '', -1, -1) WinSetTrans($hBarGUI1, '', 254) WinSetOnTop($hBarGUI1, "", 1) I see that my problem has to do something with WinSetState but have no clue how to fix it already tried to set it to @SW_UNLOCK and @SW_SHOWNORMAL.
      @swa
×