Jump to content
GroovyMan8750

Slider & Report "Help!"

Recommended Posts

GroovyMan8750

I am attempting to use sliders to create a Q&A report that outputs a log/txt  file on a PC/Server...at least I got that to work.

I have the sliders set, however I cannot get the number range to show on the GUI correctly. Could use some guidance here.

When I output the value of each slider into a log file, the values are really goofed. Could use some more guidance here too.

Any help would be greatly appreciated. I am a noob, take pity. I have self abused already!

test1.au3

Share this post


Link to post
Share on other sites
aa2zz6

 

Maybe something like this. 

#include <GUIConstantsEx.au3>

test()

Func test()
    Local $slider, $button, $label, $currentNum, $holdNum

    GUICreate("slider", 220, 300, 100, 200)
    $slider = GUICtrlCreateSlider(10, 10, 200, 20)
    GUICtrlSetLimit(-1, 10, 0);|Sets the min / Max
    $label = GUICtrlCreateLabel("" & $currentNum, 75, 100, 100, 20) ;|Label displays current slider num
    GUISetState()
    GUICtrlSetData($slider, 0) ;|Begin at 0

    While 1
        $currentNum = GUICtrlRead($slider);
        If $currentNum <> $holdNum Then
            GUICtrlSetData($label, $currentNum)
            $holdNum = $currentNum
        EndIf
    WEnd
EndFunc   ;==>test

 

Share this post


Link to post
Share on other sites
AutoBert

I just want test your script but PowerPoint.au3 is missing, So can you please add the downloadlink for PowerPoint.au3 in your first post?

Share this post


Link to post
Share on other sites
GroovyMan8750

Remove the power point.Au3 from the include. 

 

Share this post


Link to post
Share on other sites
AutoBert
Func _OKbutton()

    $aTics = GUICtrlRead($cSlider)
    $aTics2 = GUICtrlRead($cSlider2)
    $aTics3 = GUICtrlRead($cSlider3)
    $aTics4 = GUICtrlRead($cSlider4)
    $aTics5 = GUICtrlRead($cSlider5)
    $aTics6 = GUICtrlRead($cSlider6)
    $aTics7 = GUICtrlRead($cSlider7)
    $aTics8 = GUICtrlRead($cSlider8)
    $aTics9 = GUICtrlRead($cSlider9)
    $aTics10 = GUICtrlRead($cSlider10)

    If $aTics = 0 Or $aTics2 = 0 Or $aTics3 = 0 Or $aTics4 = 0 Or $aTics5 = 0 Or $aTics6 = 0 Or $aTics7 = 0 Or $aTics8 = 0 Or $aTics9 = 0 Or $aTics10 = 0 Then
        MsgBox($MB_SYSTEMMODAL, "Question Error", "There can not be a zero value.")
    ElseIf $aTics > 0 Then
        $hFile = FileOpen('Answer.txt',1) ;1 =append 2=overwrite <============= change if needed
        MsgBox($MB_SYSTEMMODAL, "Question Answer Value", " Your Answers Have Been Submited!")
        FileWrite($hFile, @CRLF & GUICtrlRead($cSlider) & @CRLF & _GUICtrlSlider_GetNumTics($cSlider2) & @CRLF & _GUICtrlSlider_GetNumTics($cSlider3) & @CRLF & _GUICtrlSlider_GetNumTics($cSlider4) & @CRLF & _GUICtrlSlider_GetNumTics($cSlider5) & @CRLF & _GUICtrlSlider_GetNumTics($cSlider6) & @CRLF & _GUICtrlSlider_GetNumTics($cSlider7) & @CRLF & _GUICtrlSlider_GetNumTics($cSlider8) & @CRLF & _GUICtrlSlider_GetNumTics($cSlider9) & @CRLF & _GUICtrlSlider_GetNumTics($cSlider10) & @CRLF & @CRLF & "****" & @HOUR & ":" & @MIN & " " & @MON & "/" & @MDAY & " " & "****" & @CRLF & "_______________________________________________________________________")
        FileWrite($hFile, @CRLF & GUICtrlRead($aTics) & @CRLF & _GUICtrlSlider_GetNumTics($aTics2) & @CRLF & _GUICtrlSlider_GetNumTics($aTics3) & @CRLF & _GUICtrlSlider_GetNumTics($aTics4) & @CRLF & _GUICtrlSlider_GetNumTics($aTics5) & @CRLF & _GUICtrlSlider_GetNumTics($aTics6) & @CRLF & _GUICtrlSlider_GetNumTics($aTics7) & @CRLF & _GUICtrlSlider_GetNumTics($aTics8) & @CRLF & _GUICtrlSlider_GetNumTics($aTics9) & @CRLF & _GUICtrlSlider_GetNumTics($aTics10) & @CRLF & @CRLF & "****" & @HOUR & ":" & @MIN & " " & @MON & "/" & @MDAY & " " & "****" & @CRLF & "_______________________________________________________________________")
        FileClose($hFile)
    EndIf

EndFunc   ;==>_OKbutton

i think this works as you wan't.

And i want to have the link for PowerPoint.au3.

Share this post


Link to post
Share on other sites
InunoTaishou

What do you mean by goofed? Using GUICtrlRead on the slider should give the value selected.

Edited by InunoTaishou

Share this post


Link to post
Share on other sites
GroovyMan8750

Will post  pp.au 3 in am...... @ home reviewing this on my kindel.

Share this post


Link to post
Share on other sites
GroovyMan8750

The label should show the range "1 2 3 4 5 6 7 8 9 10" and align accordingly to the output file.

The extra input will not go unused. I just have to workout a realtime refresh...or close to it.

Share this post


Link to post
Share on other sites
GroovyMan8750

Here is the PowerPoint.au3

It is a bit dated, but works for what I needed of it.

Can still be found on the autoit site.

 

Powerpoint.au3

Share this post


Link to post
Share on other sites
GroovyMan8750

The location of the Next prevented the numbers from appearing under the sliders.

I have made several modifications that cleaned up a few issues, however I'm still having a problem with getting the slider numbers to translate into the log file.

Any additional ideas?

 

1test.au3

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • AndyS01
      By AndyS01
      I want to create a slider that has values representing colors, like the slider on the _ChooseColor() GUI in the Misc.au3 UDF, but the max value for a slider is 32767.  
      Here is my test code:
      #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <SliderConstants.au3> #include <Misc.au3> $hGUI = GUICreate("Test", 100, 560) $BtnID = GUICtrlCreateButton("Choose", 10, 10, 50, 25) ;~ GUICtrlSetOnEvent($BtnID, "handle_choose_btn") $flags = BitOR($TBS_AUTOTICKS, $TBS_VERT) $iSliderID = GUICtrlCreateSlider(10, 50, 40, 420, $flags) $hSlider_hWnd = GUICtrlGetHandle($iSliderID) $iMaxVal = 32767 GUICtrlSetLimit($iSliderID, $iMaxVal, 0) ; change min/max value GUISetState() GUIRegisterMsg($WM_VSCROLL, "WM_V_Slider") While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE Exit Case $GUI_EVENT_PRIMARYUP ToolTip("") case $BtnID handle_choose_btn() EndSwitch WEnd ; React to a slider movement Func WM_V_Slider($hWnd, $iMsg, $wParam, $lParam) #forceref $hWnd, $iMsg, $wParam If $lParam = $hSlider_hWnd Then $iValue = GUICtrlRead($iSliderID) ConsoleWrite("+++: $iValue = " & $iValue & @CRLF) ToolTip(getRGB($iValue)) EndIf Return $GUI_RUNDEFMSG EndFunc ;==>WM_V_Slider ; Extract the RGB components from the color value Func getRGB($iColorVal) Local $hexstr, $b, $g, $r, $rgb $hexstr = StringFormat("%06X", $iColorVal) $r = StringMid($hexstr, 1, 2) $g = StringMid($hexstr, 3, 2) $b = StringMid($hexstr, 5, 2) $rgb = StringFormat("" & $iColorVal & " - rgb: %02s %02s %02s", $r, $g, $b) Return ($rgb) EndFunc ;==>getRGB Func handle_choose_btn() $color = _ChooseColor(2, 255, 0, $hGUI) ConsoleWrite("+++: $color = " & Hex($color, 8) & @CRLF) EndFunc ;==>handle_choose_btn  
    • nacerbaaziz
      By nacerbaaziz
      Hi guys
      I have a question about the slider  controle
      There is a problem with screen readers, wen we Using a screen reader We usually move between GUI controls using the tab key.
      But when you create a slider , beside to it there are  buttons and check boxes or any other controls, When I move between the GUI controls using the tab key I can not find the slider.
      But if it were alone in the window, I would find it normally.
      Is there a solution to Solve this problem please?
      This is the code i tried
      #include <GUIConstantsEx.au3>
      #include <WindowsConstants.au3>
      #include <MsgBoxConstants.au3>
      #include <SliderConstants.au3>
      main()
      Func main()
          GUICreate("slider", 200, 200, -1, -1)
      GUICtrlCreateGroup("slider", 10, 10, 240, 50)
          Local $idSlider1 = GUICtrlCreateSlider(50, 30, 200, 20, BitOr($TBS_DOWNISLEFT, $TBS_BOTH))
          GUICtrlSetLimit(-1, 100, 0)
      ;GUIStartGroup("")
          Local $idButton = GUICtrlCreatebutton("Value?", 75, 70, 70, 20)
          GUISetState(@SW_SHOW)
          GUICtrlSetData($idSlider1, 10)
      while 1
      switch GUIGetMsg()
      case $GUI_EVENT_CLOSE
      exit
      case $idButton
                  MsgBox($MB_SYSTEMMODAL, "slider1", GUICtrlRead($idSlider1))
      endSwitch
      Wend
      EndFunc
      [Click and drag to move]
       
       
    • b9k
      By b9k
      Hi, I am stuck on a GUI problem and would like your help to solve it.
      I am trying to automate the SoundWire Server app to match my current system volume level while it is minimized to the notification area (so no clicking or stealing focus),
      I can already get the handle and alter the tracker position by sending a WM_SETPOS message, but somehow the actual volume is not changed: I think I need to do something else to trigger the event handler for the value change and propagate it correctly.
      This is the control summary from Au3 info:
      >>>> Window <<<< Title: SoundWire Server Class: #32770 Position: 441, 218 Size: 566, 429 Style: 0x94CA00C4 ExStyle: 0x00050101 Handle: 0x0000000000510E12 >>>> Control <<<< Class: msctls_trackbar32 Instance: 4 ClassnameNN: msctls_trackbar324 Name: Advanced (Class): [CLASS:msctls_trackbar32; INSTANCE:4] ID: 6002 Text: Position: 51, 222 Size: 47, 126 ControlClick Coords: 1, 101 Style: 0x5001000A ExStyle: 0x00000000 Handle: 0x00000000001234C8 >>>> Mouse <<<< Position: 496, 567 Cursor ID: 2 Color: 0xF0F0F0 >>>> StatusBar <<<< >>>> ToolsBar <<<< >>>> Visible Text <<<< Default multimedia device Tray on Start Static Server Address: 192.168.1.8 Status: Connected to B9K~OP3 Audio Output Audio Input Level Record to File Input Select: 44.1 kHz Minimize to Master Volume Mute >>>> Hidden Text <<<< Slider2 Mute OK Cancel Label Balance Slider1 Volume Front L/R Fr C/LFE Side L/R Back L/R
      I am attaching the program in question so you don't have to install it (i don't know if it is portable enough, tough): 

      SoundWire Server_files.zip

      Thanks in advance and I hope I didn't post in the wrong section
    • Elzie
      By Elzie
      Hi I am trying to make a gui that uses a slide to change pictures and uses internet-read from  guinness function.
      Thanks for your help.
      Ok found the issue
      #include <GUIConstantsEx.au3> #include <SliderConstants.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <WinAPI.au3> #include <WinAPIRes.au3> #Region ### START Koda GUI section ### Form= $Form1 = GUICreate("Form1", 229, 165, 2392, 436) $Slider = GUICtrlCreateSlider(32, 128, 150, 29) GUICtrlSetLimit($Slider, 2, 1) GUICtrlSetData($Slider, 1) GUICtrlSetBkColor($Slider, 0x0099FF) GUICtrlSetColor(-1, 0xA6CAF0) $hSlider_Handle = GUICtrlGetHandle(-1) $sFile1 = _GetURLImage("http://www.pendriveapps.com/wp-content/uploads/autoit.jpg ", @TempDir) $sFile2 = _GetURLImage("http://domoticx.com/wp-content/uploads/autoit-logo-200x154.jpg ", @TempDir) $Hpic1 = GUICtrlCreatePic($sFile1, 56, 8, 108, 108, BitOR($SS_NOTIFY, $WS_GROUP, $WS_CLIPSIBLINGS)) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Slider $a = GUICtrlRead($Slider) If $a = 2 Then GUICtrlDeleteImage($Hpic1) $Hpic2 = GUICtrlCreatePic($sFile2, 56, 8, 108, 108, BitOR($SS_NOTIFY, $WS_GROUP, $WS_CLIPSIBLINGS)) ElseIf $a = 1 Then GUICtrlDeleteImage($hpic2) $Hpic1 = GUICtrlCreatePic($sFile1, 56, 8, 108, 108, BitOR($SS_NOTIFY, $WS_GROUP, $WS_CLIPSIBLINGS)) EndIf EndSwitch WEnd Func _GetURLImage($sURL, $sDirectory = @ScriptDir) ; Author ........: guinness Local $hDownload, $sFile $sFile = StringRegExpReplace($sURL, "^.*/", "") If @error Then Return SetError(1, 0, $sFile) EndIf If StringRight($sDirectory, 1) <> "\" Then $sDirectory = $sDirectory & "\" EndIf $sDirectory = $sDirectory & $sFile If FileExists($sDirectory) Then Return $sDirectory EndIf $hDownload = InetGet($sURL, $sDirectory, 17, 1) While InetGetInfo($hDownload, 2) = 0 If InetGetInfo($hDownload, 4) <> 0 Then InetClose($hDownload) Return SetError(1, 0, $sDirectory) EndIf Sleep(105) WEnd InetClose($hDownload) Return $sDirectory EndFunc ;==>_GetURLImage Func GUICtrlDeleteImage($iCtrlID) ; Author ........: guinness Local Const $STM_SETIMAGE = 0x0172 Local $aSetImage = 0, _ $bReturn = True, _ $iMsg = 0 Switch _WinAPI_GetClassName($iCtrlID) Case 'Button' ; button, checkbox, groupbox, radiobutton. Local $aButton = [$IMAGE_BITMAP, $IMAGE_ICON] $aSetImage = $aButton $aButton = 0 Case 'Static' ; icon, label, picture. Local $aStatic = [$IMAGE_BITMAP, $IMAGE_CURSOR, $IMAGE_ICON] $aSetImage = $aStatic $aStatic = 0 $iMsg = $STM_SETIMAGE Case Else $bReturn = False EndSwitch If $bReturn Then $bReturn = False Local $hImage = 0 For $i = 0 To UBound($aSetImage) - 1 $hImage = GUICtrlSendMsg($iCtrlID, $iMsg, $aSetImage[$i], 0) If $hImage <> 0 Then Switch $aSetImage[$i] Case $IMAGE_BITMAP $bReturn = _WinAPI_DeleteObject($hImage) Case $IMAGE_CURSOR $bReturn = _WinAPI_DeleteObject($hImage) If Not $bReturn Then $bReturn = _WinAPI_DestroyCursor($hImage) > 0 EndIf Case $IMAGE_ICON $bReturn = _WinAPI_DeleteObject($hImage) If Not $bReturn Then $bReturn = _WinAPI_DestroyIcon($hImage) > 0 EndIf EndSwitch ExitLoop EndIf Next If Not $bReturn Then $bReturn = GUICtrlSetImage($iCtrlID, 'shell32.dll', -50) > 0 EndIf EndIf Return $bReturn EndFunc ;==>GUICtrlDeleteImage  
    • Grosminet
      By Grosminet
      I would like to use a WM_NOTIFY function to manage a slider thumb position change, according this MSN trackbar link TRBN_THUMBPOSCHANGING .
      Does somebody know why the notification code "TRBN_THUMBPOSCHANGING" for the slider control seems ignored in "WindowsConstants.au3" include file ?
      Searching in AutoIt or MSN forum , or googling this code, I don't succeed to catch any code info !!! Is it obsolete ?
      Thanks
      Alain.
×