Jump to content
Rskm

subscript used on non-accessible variable

Recommended Posts

Rskm

i have seen many pointing out issues related to this, i tried reading through them - still unable to solve mine.. i have a script which reads certain lines based on a search item, this is an iterative process - the ldflst_file gets updated for each iteration and the script finds the line number which has the search item. this works perfectly for few iterations, but stops in some cases abruptly with the error = 

Subscript used on non-accessible variable
$aRead^ ERROR

I have verified that the search item is present in the file. what could be the reason for this code to stop in certain cases. thanks for help

my code below (partial).. full code is in attachment

 

local $aRead=FileReadToArray($ldflst_file)

global $ldflst_var1=" JOINT  LOAD       FORCE(X)        FORCE(Y)        FORCE(Z)       MOMENT(X)       MOMENT(Y)       MOMENT(Z)"

 

for $i= 0 to $ldflst_totlines    ; ldflst_totlines is total number of  lines in the file 'ldflst_file'

    if $aRead[$i]=$ldflst_var1 Then

        $ldflst_LFound=$i

        ExitLoop
        else
        EndIf
Next

 

 

nomo_new1.au3

Share this post


Link to post
Share on other sites
Melba23

Rskm,

You do no error-checking in that script to confirm that you have a valid array before you  loop through it. You might think that there is no possibility of error, but obviously there is one - so add some checking to see just why the array is not present when you think it should be. Then you will have answered your own question.

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
BrewManNH

That error is telling you that no array was created when you did the FileReadToArray, which means that function failed to read the file for some reason. find out why that is and you'll probably fix the error.


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites
Earthshine
Posted (edited)

look at the help file for Arrays. I believe you want to loop on your UBound() (Upper Boundary) of your array. remember you read in a file to ldflst_totlines  and then you should loop 0 to ldflst_totlines -1, right?

you are looping one too many times?

Edited by Earthshine

My resources are limited. You must ask the right questions

 

Share this post


Link to post
Share on other sites
Rskm

thanks melba23,brewmanNH for the suggestion.. i am new with autoit.. how do i make sure the array is created ? sleep option will work  - so that i put sufficient time before/after reading the array.. this error does not happen always, so i cannot check it manually for each iterations - how to ensure that the array is created.. thanks again

Share this post


Link to post
Share on other sites
JLogan3o13
Posted (edited)

@Rskm the help file is your friend. Look at IsArray.

Check first to ensure the array exists, second that it contains the data you expect (_ArrayDisplay in the help file).

Edited by JLogan3o13

√-1 2^3 ∑ π, and it was delicious!

How to get your question answered on this forum!

Share this post


Link to post
Share on other sites
Earthshine
Posted (edited)

I made a few minor corrections, this might work now. You are creating the array by FileReadToArray. the loop should work and corrected the Global definition, you can't define globals every time in a loop

 

test.au3

Edited by Earthshine

My resources are limited. You must ask the right questions

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • vati1011
      By vati1011
      Hey, guys.
      Currently, I'm using Opencv UDF and i'm  encountering issues with DLLOPEN(). it is failing and returning -1
      But, I cannot figure out why it is failing.
      I need help from people.
      I'm running windows 10 32bit.
      This's my code.
      #RequireAdmin $fileopen = DllOpen("opencv_core2413.dll") MsgBox(0,"Result",$fileopen) Example.au3opencv_core2413.dll
    • Skeletor
      By Skeletor
      Hi Guys,
      Is it possible to get a variable on your For..Next loop? 
       
      Local $Lines1 = _FileCountLines(C:\temp\test.txt) Local $linesToCount2 = $Lines1 + 2 $var = Number($linesToCount2) For $count = 1 To _FileCountLines($FileRead2) Step 1 For $i = $var To $count Next ;Code does stuff here Next Somehow my code doesn't work even though I thought I could convert the variable to a Integer / Number.
      This code I posted above does not move to the next value.
      But the code below does... why is that?
      For $count = 1 To _FileCountLines($FileRead2) Step 1 For $i = 2 To $count Next ;Code does stuff here Next  
      Why is the For loop resetting itself?
      Is it because the program does not cache the variable and needs to keep on acquiring this variable each time?
      If so , how would you make this variable static?

       
    • Miliardsto
      By Miliardsto
      I got that func
      Func makeHelpImgGUI($title,$width,$height,$img) $img = GUICtrlCreatePic("",20,40,$width,$height) _ResourceSetImageToCtrl($img, "HERE") EndFunc and I call this func like that
      makeHelpImgGUI("Image",1190, 800,$SETTINGS_JPG)  
      so what is the problem in the parameter where is - "HERE" I need value of img but passed as string
      so $img = $SETTINGS_JPG and how make it "SETTINGS_JPG"
       
      I tried something like that but not work
      Func makeHelpImgGUI($title,$width,$height,$img) $name_str = String($img) $name_str = StringTrimLeft ($name_str, 1 ) $img = GUICtrlCreatePic("",20,40,$width,$height) _ResourceSetImageToCtrl($img, $name_str) EndFunc  
    • xiantez
      By xiantez
      This script used to work on an older version of AutoIT. Currently I am running AutoIT v3.3.14.5 and it's failing.
      Func PublicIP() ;Post public facing IP address Local $url = 'https://www.google.com/search?client=opera&q=what+is+my+ip&sourceid=opera&ie=UTF-8&oe=UTF-8' Local $getIPaddress = BinaryToString(InetRead($url)) Local $sStart = 'clamp:2">' Local $sEnd = '</div>' Local $ipaddress = _StringBetween($getIPaddress, $sStart, $sEnd For $i In $ipaddress MsgBox(0, 'External IP', "Your public IP address is " & $i) Next EndFunc ;==>PublicIP The console output shows:
      "C:\Users\user\Documents\AutoIT\Scripts\WSI Tools.au3" (197) : ==> Variable must be of type "Object".: For $i In $ipaddress For $i In $ipaddress^ ERROR ->14:12:16 AutoIt3.exe ended.rc:1 +>14:12:16 AutoIt3Wrapper Finished. >Exit code: 1 Time: 9.811
×