what is wrong?

luis713 · August 7, 2018

Hi, I have this code and runs fine, but when I run it and sends the mail, if I run it again gives an error, I took this code from the forum, I know I have to add an if not @error but I don't know where because is an object.

Note: I'm attaching files

#include <File.au3>

; ===============================================================================================================================
; Variables for the _INetSmtpMailCom
; ===============================================================================================================================
Global Enum _
        $g__INetSmtpMailCom_ERROR_FileNotFound = 1, _
        $g__INetSmtpMailCom_ERROR_Send, _
        $g__INetSmtpMailCom_ERROR_ObjectCreation, _
        $g__INetSmtpMailCom_ERROR_COUNTER

Global Const $g__cdoSendUsingPickup = 1 ; Send message using the local SMTP service pickup directory.
Global Const $g__cdoSendUsingPort = 2 ; Send the message using the network (SMTP over the network). Must use this to use Delivery Notification
Global Const $g__cdoAnonymous = 0 ; Do not authenticate
Global Const $g__cdoBasic = 1 ; basic (clear-text) authentication
Global Const $g__cdoNTLM = 2 ; NTLM
Global $gs_thoussep = "."
Global $gs_decsep = ","
Global $sFileOpenDialog = ""

; Delivery Status Notifications
Global Const $g__cdoDSNDefault = 0 ; None
Global Const $g__cdoDSNNever = 1 ; None
Global Const $g__cdoDSNFailure = 2 ; Failure
Global Const $g__cdoDSNSuccess = 4 ; Success
Global Const $g__cdoDSNDelay = 8 ; Delay


_Sendmail()



Func _Sendmail()
    Local $sSmtpServer = "smtp.gmail.com" ; address for the smtp-server to use - REQUIRED
    Local $sFromName = "name" ; name from who the email was sent
    Local $sFromAddress = "email@gmail.com" ; address from where the mail should come
    Local $sToAddress = "email@gmail.com" ; destination address of the email - REQUIRED
    Local $sSubject = "subject" ; subject from the email - can be anything you want it to be
    Local $sBody = "Text to be sent" ; the messagebody from the mail - can be left blank but then you get a blank mail
    Local $sAttachFiles = "" ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed
    Local $sCcAddress = "" ; address for cc - leave blank if not needed
    Local $sBccAddress = "" ; address for bcc - leave blank if not needed
    Local $sImportance = "Normal" ; Send message priority: "High", "Normal", "Low"
    Local $sUsername = "email@gmail.com" ; username for the account used from where the mail gets sent - REQUIRED
    Local $sPassword = "xxxxxx" ; password for the account used from where the mail gets sent - REQUIRED
    
    Local $iIPPort = 465 ; GMAIL port used for sending the mail
    Local $bSSL = True ; GMAIL enables/disables secure socket layer sending - set to True if using httpS


    Local $bIsHTMLBody = False
    Local $iDSNOptions = $g__cdoDSNDefault

    Local $rc = _INetSmtpMailCom($sSmtpServer, $sFromName, $sFromAddress, $sToAddress, $sSubject, $sBody, $sAttachFiles, $sCcAddress, $sBccAddress, $sImportance, $sUsername, $sPassword, $iIPPort, $bSSL, $bIsHTMLBody, $iDSNOptions)
    If @error Then
        MsgBox(0, "_INetSmtpMailCom(): Error sending message", _
                "Error code: " & @error & @CRLF & @CRLF & _
                "Error Hex Number: " & _INetSmtpMailCom_ErrHexNumber() & @CRLF & @CRLF & _
                "Description: " & _INetSmtpMailCom_ErrDescription() & @CRLF & @CRLF & _
                "Description (rc): " & $rc & @CRLF & @CRLF & _
                "ScriptLine: " & _INetSmtpMailCom_ErrScriptLine() _
                )
        ConsoleWrite("### COM Error !  Number: " & _INetSmtpMailCom_ErrHexNumber() & "   ScriptLine: " & _INetSmtpMailCom_ErrScriptLine() & "   Description:" & _INetSmtpMailCom_ErrDescription() & @LF)
    Else
        Dim $iMsgBoxAnswer
        $iMsgBoxAnswer = MsgBox(262208, "Email sent", "The email was sent :)", 5)
    EndIf

EndFunc   ;==>_Enviarmail



#Region UDF Functions
; The UDF
; #FUNCTION# ====================================================================================================================
; Name ..........: _INetSmtpMailCom
; Description ...:
; Syntax ........: _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress[, $s_Subject = ""[, $as_Body = ""[,
;                  $s_AttachFiles = ""[, $s_CcAddress = ""[, $s_BccAddress = ""[, $s_Importance = "Normal"[, $s_Username = ""[,
;                  $s_Password = ""[, $IPPort = 25[, $bSSL = False[, $bIsHTMLBody = False[, $iDSNOptions = $g__cdoDSNDefault]]]]]]]]]]]])
; Parameters ....: $s_SmtpServer        - A string value.
;                  $s_FromName          - A string value.
;                  $s_FromAddress       - A string value.
;                  $s_ToAddress         - A string value.
;                  $s_Subject           - [optional] A string value. Default is "".
;                  $s_Body              - [optional] A string value. Default is "".
;                  $s_AttachFiles       - [optional] A string value. Default is "".
;                  $s_CcAddress         - [optional] A string value. Default is "".
;                  $s_BccAddress        - [optional] A string value. Default is "".
;                  $s_Importance        - [optional] A string value. Default is "Normal".
;                  $s_Username          - [optional] A string value. Default is "".
;                  $s_Password          - [optional] A string value. Default is "".
;                  $IPPort              - [optional] An integer value. Default is 25.
;                  $bSSL                - [optional] A binary value. Default is False.
;                  $bIsHTMLBody         - [optional] A binary value. Default is False.
;                  $iDSNOptions         - [optional] An integer value. Default is $g__cdoDSNDefault.
; Return values .: None
; Author ........: Jos
; Modified ......: mLipok
; Remarks .......:
; Related .......: http://www.autoitscript.com/forum/topic/23860-smtp-mailer-that-supports-html-and-attachments/
; Link ..........: http://www.autoitscript.com/forum/topic/167292-smtp-mailer-udf/
; Example .......: Yes
; ===============================================================================================================================
Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $s_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance = "Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $bSSL = False, $bIsHTMLBody = False, $iDSNOptions = $g__cdoDSNDefault)
    ; init Error Handler
    _INetSmtpMailCom_ErrObjInit()

    Local $objEmail = ObjCreate("CDO.Message")
    If Not IsObj($objEmail) Then Return SetError($g__INetSmtpMailCom_ERROR_ObjectCreation, Dec(_INetSmtpMailCom_ErrHexNumber()), _INetSmtpMailCom_ErrDescription())

    ; Clear previous Err information
    _INetSmtpMailCom_ErrHexNumber(0)
    _INetSmtpMailCom_ErrDescription('')
    _INetSmtpMailCom_ErrScriptLine('')

    $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>'
    $objEmail.To = $s_ToAddress

    If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress
    If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress
    $objEmail.Subject = $s_Subject

    ; Select whether or not the content is sent as plain text or HTM
    If $bIsHTMLBody Then
        $objEmail.Textbody = $s_Body & @CRLF
    Else
        $objEmail.HTMLBody = $s_Body
    EndIf

    ; Add Attachments
    If $s_AttachFiles <> "" Then
        Local $S_Files2Attach = StringSplit($s_AttachFiles, ";")
        For $x = 1 To $S_Files2Attach[0]
            $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x])
            If FileExists($S_Files2Attach[$x]) Then
                ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF)
                $objEmail.AddAttachment($S_Files2Attach[$x])
            Else
                ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF)
                Return SetError($g__INetSmtpMailCom_ERROR_FileNotFound, 0, 0)
            EndIf
        Next
    EndIf

    ; Set Email Configuration
    $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = $g__cdoSendUsingPort
    $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer
    If Number($IPPort) = 0 Then $IPPort = 25
    $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort
    ;Authenticated SMTP
    If $s_Username <> "" Then
        $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = $g__cdoBasic
        $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username
        $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password
    EndIf
    $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = $bSSL

    ;Update Configuration Settings
    $objEmail.Configuration.Fields.Update

    ; Set Email Importance
    Switch $s_Importance
        Case "High"
            $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "High"
        Case "Normal"
            $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Normal"
        Case "Low"
            $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Low"
    EndSwitch

    ; Set DSN options
    If $iDSNOptions <> $g__cdoDSNDefault And $iDSNOptions <> $g__cdoDSNNever Then
        $objEmail.DSNOptions = $iDSNOptions
        $objEmail.Fields.Item("urn:schemas:mailheader:disposition-notification-to") = $s_FromAddress
;~      $objEmail.Fields.Item("urn:schemas:mailheader:return-receipt-to") = $s_FromAddress
    EndIf

    ; Update Importance and Options fields
    $objEmail.Fields.Update

    ; Sent the Message
    $objEmail.Send

    If @error Then
        _INetSmtpMailCom_ErrObjCleanUp()
        Return SetError($g__INetSmtpMailCom_ERROR_Send, Dec(_INetSmtpMailCom_ErrHexNumber()), _INetSmtpMailCom_ErrDescription())
    EndIf

    ; CleanUp
    $objEmail = ""
    _INetSmtpMailCom_ErrObjCleanUp()

EndFunc   ;==>_INetSmtpMailCom

;
; Com Error Handler
Func _INetSmtpMailCom_ErrObjInit($bParam = Default)
    Local Static $oINetSmtpMailCom_Error = Default
    If $bParam == 'CleanUp' And $oINetSmtpMailCom_Error <> Default Then
        $oINetSmtpMailCom_Error = ''
        Return $oINetSmtpMailCom_Error
    EndIf
    If $oINetSmtpMailCom_Error = Default Then
        $oINetSmtpMailCom_Error = ObjEvent("AutoIt.Error", "_INetSmtpMailCom_ErrFunc")
    EndIf
    Return $oINetSmtpMailCom_Error
EndFunc   ;==>_INetSmtpMailCom_ErrObjInit

Func _INetSmtpMailCom_ErrObjCleanUp()
    _INetSmtpMailCom_ErrObjInit('CleanUp')
EndFunc   ;==>_INetSmtpMailCom_ErrObjCleanUp

Func _INetSmtpMailCom_ErrHexNumber($vData = Default)
    Local Static $vReturn = 0
    If $vData <> Default Then $vReturn = $vData
    Return $vReturn
EndFunc   ;==>_INetSmtpMailCom_ErrHexNumber

Func _INetSmtpMailCom_ErrDescription($sData = Default)
    Local Static $sReturn = ''
    If $sData <> Default Then $sReturn = $sData
    Return $sReturn
EndFunc   ;==>_INetSmtpMailCom_ErrDescription

Func _INetSmtpMailCom_ErrScriptLine($iData = Default)
    Local Static $iReturn = ''
    If $iData <> Default Then $iReturn = $iData
    Return $iReturn
EndFunc   ;==>_INetSmtpMailCom_ErrScriptLine

Func _INetSmtpMailCom_ErrFunc()
    _INetSmtpMailCom_ErrObjInit()
    _INetSmtpMailCom_ErrHexNumber(Hex(_INetSmtpMailCom_ErrObjInit().number, 8))
    _INetSmtpMailCom_ErrDescription(StringStripWS(_INetSmtpMailCom_ErrObjInit().description, 3))
    _INetSmtpMailCom_ErrScriptLine(_INetSmtpMailCom_ErrObjInit().ScriptLine)
    SetError(1) ; something to check for when this function returns
    Return
EndFunc   ;==>_INetSmtpMailCom_ErrFunc

#EndRegion UDF Functions

Jos · August 7, 2018

which error exactly?

Jos

Sign In

what is wrong?

Recommended Posts

luis713

Jos

Create an account or sign in to comment

Create an account

Sign in

Recently Browsing 0 members

Browse

AutoIt Resources

Release

Beta