Sign in to follow this  
Followers 0
MadBoy

How to add progress bar to script?

5 posts in this topic

Hey, i've been reading a lot of posts about progress bars but since my coding knowledge is poor it takes me a lot of time to figure how to add progress bar made by elltoro in this post. Maybe someone could hel me out by adding it to my code so i could understand it ;p and so we could see the progress bar going while the applications are being installed by the end user (hopefully it would be more or less accurate).

Here's the progress bar:

opt("MustDeclareVars", 1)
opt("GUICoordMode", 2)

#include-once
#include <GUIConstants.au3>
#Include <GuiStatusBar.au3>

Local $gui, $StatusBar1, $Progress1, $msg,  $asize[1],$iProgress
Local $a[3] = [100,350,-1]
Local $s[3] = ["New Text","More Text","Even More Text"]

; Statusbar with progress bar
$gui = GUICreate("StatusBar GUI", 500, -1, -1, -1, $WS_SIZEBOX)
GUISetState(@SW_SHOW)

Dim $s[3] = ["Ready. ","","Even More Text"],$a_box
$StatusBar1 = _GuiCtrlStatusBarCreate($gui, $a, $s)

;=== add progress to statusbar
;Get panel size and shink a little for progressbar size.
$a_box = _SizePanel($StatusBar1,1)
;Create the progress bar with the proper size.
$Progress1 = GUICtrlCreateProgress($a_box[0],$a_box[1],$a_box[2],$a_box[3])
GUICtrlSetResizing($Progress1,802)
;change progressbars parent to statusbar
_SetParent($Progress1,$StatusBar1)
; move progressbar to statusbar.
_CtrlMove($Progress1,$a_box)
; and ta da working

GUISetState()
While 1
   $msg = GUIGetMsg()
   Select
   Case $msg = $GUI_EVENT_RESIZED
      ;_ResizeHandler();needed to handle child????
         _GuiCtrlStatusBarResize ($StatusBar1)
      Case $msg = $GUI_EVENT_CLOSE
         ExitLoop
     Case Else
         if $iProgress < 100 Then
             $iProgress = $iProgress +1
             GUICtrlSetData($Progress1,$iProgress)
         Else
             $iProgress = 0
         EndIf
        sleep(100)
      ;;;;;
   EndSelect

WEnd
Exit
;===============================================================================
;Resize things here not handled by GuiCtrlSetResize
;===============================================================================
Func _ResizeHandler()
   _GuiCtrlStatusBarResize ($StatusBar1)
;  _CtrlMove($Progress1,_SizePanel($StatusBar1,1))
EndFunc;==>_ResizeHandler

;===============================================================================
;GetPanel size and shrink them for progress size.
;===============================================================================
Func _SizePanel($id_control,$i_panel,$i_pad =2)
    Local $a_box = _GuiCtrlStatusBarGetRect($id_control,$i_panel)
;shrink the rect a little to fit inside panel
    $a_box[2] = $a_box[2]- $a_box[0]-$i_pad
    $a_box[3] = $a_box[3]- $a_box[1]-$i_pad
    $a_box[0] = $a_box[0] +$i_pad
    $a_box[1] = $a_box[1] +$i_pad
    Return $a_box
EndFunc

;===============================================================================
;Wrap SetParent Msg
;===============================================================================
Func _SetParent($id_child, $h_parent)
;   Local $h_parent,$h_child
    If Not IsHWnd($h_parent) Then $h_parent = HWnd($h_parent)
    If Not IsHWnd($id_child) Then $id_child = GUICtrlGetHandle($id_child)
    If DllCall("user32.dll", "hwnd", "SetParent", "hwnd", $id_child, "hwnd", $h_parent) <> 0 Then
        Return
    Else
        seterror(1)
        Return 0
    EndIf
EndFunc ;==>_SetParent

;===============================================================================
;Wrap MoveWindow Msg
;===============================================================================

Func _CtrlMove($id_control,$a_metric,$b_repaint =True)
    Local $h_control
    If Not IsHWnd($id_control) Then $h_control = GUICtrlGetHandle($id_control)
    if IsArray($a_metric) Then
        if DllCall("user32.dll", "long", "MoveWindow", "hwnd", $h_control, _
            "int", $a_metric[0], "int", $a_metric[1], _
            "int", $a_metric[2], "int", $a_metric[3], "int",$b_repaint) <> 0 Then
            Return
        Else
            seterror(1)
            Return 0
        EndIf
        
    Else
        seterror(1)
        Return 0        
    EndIf
EndFunc

And here is my code:

; Installer
#NoTrayIcon
; Dane programu
$autor = "Me / Company"
; Wersja;)
$version = 0.8
; Lokalizacja - Nazwa serwera
$location = "\\server\Install"

#include <GUIConstants.au3>

;FileInstall("c:\logo.gif", "C:\Windows\Temp.gif")
Opt("GUICoordMode", 1)
GUICreate("Installer ver. " & $version, 600,460)
; Logo
;$n=GUICtrlCreatePic("c:\Windows\Temp.gif",0,0, $position2 + 75,35)
; TAG - program napisany przez
$position10 = 310
$position11 = 10
$label50 = GUICtrlCreateLabel ("",  $position10, $position11, 300, 15)
GUICtrlSetData( $Label50, "Program napisał: " & $autor,$GUI_SHOW )
GUICtrlSetState(-1,$GUI_DISABLE)

$tab=GUICtrlCreateTab (10,5, 585,450)
; OPROGRAMOWANIE - MENU
$tab0=GUICtrlCreateTabitem ( "Programy")


; Grupa pierwsza - profile
$nr0 = 14; pierwsza wspolrzedna kontrolek
$nr1 = 17; pierwsza wspolrzedna dla guzikow radio tabelki
$nr2 = 70; druga wspolrzedna dla guzikow radio tabelki
$nr3 = 16;
$position1 = 19
$position2 = 300
$nr_button1 = 450
$nr_button2 = 400
; Utworzenie kontrolek
$button_1 = GUICtrlCreateButton ("Zainstaluj", $nr_button1, $nr_button2, 120, 40)
$group_1 = GUICtrlCreateGroup ("Wybierz profil:", $nr0, 50, 175, 220)
GUIStartGroup()
$radio_1 = GUICtrlCreateRadio ("Standardowy", $nr1, $nr2, 150, 20)
$radio_2 = GUICtrlCreateRadio ("Standardowy mobilny", $nr1, $nr2 + 30, 150, 20)
$radio_3 = GUICtrlCreateRadio ("Zaawansowany", $nr1, $nr2 + 60, 150, 20)
$radio_4 = GUICtrlCreateRadio ("Zaawansowany mobilny", $nr1, $nr2 + 90, 150, 20)
$radio_5 = GUICtrlCreateRadio ("Super", $nr1, $nr2 +120, 150, 20)
$radio_6 = GUICtrlCreateRadio ("Super mobilny", $nr1, $nr2 + 150, 150, 20)
; Grupa druga - wybor reczny
$group_2 = GUICtrlCreateGroup ("", 200, 50, 175, 35)
$radio_7 = GUICtrlCreateRadio ("Wybór reczny", 202, 60, 150, 20)
;GUICtrlSetState(-1,$GUI_DISABLE)


;Napisy do GUI wyswietlanego po wybraniu profilu
$group_3 = GUICtrlCreateGroup ("", $nr0, 280, 175, 165)
GUICtrlSetState(-1,$GUI_HIDE)
$Label1= GUICtrlCreateLabel ("",  $position1, $position2, 150, 20)
$Label2= GUICtrlCreateLabel ("",  $position1, $position2 + 15, 150, 20)
$Label3= GUICtrlCreateLabel ("",  $position1, $position2 + 30, 150, 20)
$Label4= GUICtrlCreateLabel ("",  $position1, $position2 + 45, 150, 20)
$Label5= GUICtrlCreateLabel ("",  $position1, $position2 + 60, 150, 20)
$Label6= GUICtrlCreateLabel ("",  $position1, $position2 + 75, 150, 20)
$Label7= GUICtrlCreateLabel ("",  $position1, $position2 + 90, 150, 20)
$Label8= GUICtrlCreateLabel ("",  $position1, $position2 + 105, 150, 20)
$Label9= GUICtrlCreateLabel ("",  $position1, $position2 + 120, 150, 20)
;GUI z CheckBox-ami dla wyboru recznego
$wybor= GUICtrlCreateTreeView (200,90,175,180,BitOr($TVS_CHECKBOXES,$TVS_HASBUTTONS,$TVS_HASLINES,$TVS_LINESATROOT,$TVS_DISABLEDRAGDROP,$TVS_SHOWSELALWAYS),$WS_EX_CLIENTEDGE)
GUICtrlSetState(-1,$GUI_HIDE)
$label10 = GuiCtrlCreateTreeViewItem("7 zip", $wybor)
$label11 = GuiCtrlCreateTreeViewItem("Adobe Acrobat 7.0", $wybor)
$label12 = GuiCtrlCreateTreeViewItem("Cisco VPN 4.7", $wybor)
$label13 = GuiCtrlCreateTreeViewItem("Lotus Notes 5.02c", $wybor)
$label14 = GuiCtrlCreateTreeViewItem("Lotus Notes 5.10a", $wybor)
$label15 = GuiCtrlCreateTreeViewItem("Microsoft Office XP", $wybor)
$label16 = GuiCtrlCreateTreeViewItem("Microsoft Office 2003", $wybor)
$label17 = GuiCtrlCreateTreeViewItem("Microsoft Project 2003", $wybor)
$label18 = GuiCtrlCreateTreeViewItem("Microsoft Visio 2003", $wybor)        
$label19 = GuiCtrlCreateTreeViewItem("Symantec Antivirus", $wybor)


; STEROWNIKI MENU
$tab1=GUICtrlCreateTabitem ("Sterowniki")
$button_2 = GUICtrlCreateButton ("Wyszukaj sterowniki", $nr_button1, $nr_button2, 120, 40)
$treeview = GUICtrlCreateTreeView ($nr0,50,300,350,BitOr($TVS_HASBUTTONS,$TVS_HASLINES,$TVS_LINESATROOT,$TVS_DISABLEDRAGDROP,$TVS_SHOWSELALWAYS),$WS_EX_CLIENTEDGE)
;----
$maxdataitem = GUICtrlCreateTreeViewitem ("Maxdata",$treeview)
$3100Xitem = GUICtrlCreateTreeViewitem ("Maxdata 3100X",$maxdataitem)
$3150Xitem = GUICtrlCreateTreeViewitem ("Maxdata 3100X",$maxdataitem)
$3200Xitem = GUICtrlCreateTreeViewitem ("Maxdata 3200X",$maxdataitem)
$6100Xitem = GUICtrlCreateTreeViewitem ("Maxdata 6100X",$maxdataitem)
$7000Xitem = GUICtrlCreateTreeViewitem ("Maxdata 7000X",$maxdataitem)
$7000DXitem = GUICtrlCreateTreeViewitem ("Maxdata 7000X",$maxdataitem)
$7100Xitem = GUICtrlCreateTreeViewitem ("Maxdata 7100X",$maxdataitem)
$8000Xitem = GUICtrlCreateTreeViewitem ("Maxdata 8000X",$maxdataitem)
$8100ISitem = GUICtrlCreateTreeViewitem ("Maxdata 8100IS",$maxdataitem)
$8100Xitem = GUICtrlCreateTreeViewitem ("Maxdata 8100X",$maxdataitem)
;----
$compaqitem = GUICtrlCreateTreeViewitem ("HP Compaq",$treeview)
$evon150item = GUICtrlCreateTreeViewitem ("Compaq EVO N150",$compaqitem)
$evon160item = GUICtrlCreateTreeViewitem ("Compaq EVO N160",$compaqitem)
;----
$fujitsuitem = GUICtrlCreateTreeViewitem ("Fujitsu-Siemens",$treeview)
$fujitsuP300SiSitem = GUICtrlCreateTreeViewitem ("Fujitsu-Siemens P300 - SiS661",$fujitsuitem)
$fujitsuP320SiSitem = GUICtrlCreateTreeViewitem ("Fujitsu-Siemens P320 - SiS661",$fujitsuitem)
;----
$toshibaitem = GUICtrlCreateTreeViewitem ("Toshiba",$treeview)
;---
$ibmitem = GUICtrlCreateTreeViewitem ("Ibm",$treeview)
;GUICtrlCreateTabitem ("")


; Show the GUI
GUISetState ()
;-----------------------------------------------------------------------------
;-----------------------------------------------------------------------------
;-----------------------------------------------------------------------------
;-----------------------------------------------------------------------------
;-----------------------------------------------------------------------------
; Sciezki do programow
$7zip = $location &"\Main\Zip\zip.exe /S"
$7zip_comment = "7zip"
$Adobe7 = $location &"\Main\Adobe_Acrobat\Adobe_Reader_7.0.msi -qn"
$Adobe7_comment = "Adobe Acrobat Reader 7.0"
$Notes502 = $location &"\Main\Lotus_Notes_5.02c\Setup.exe -s -f1 SETUP.ISS"
$Notes502_comment = "Lotus Notes 5.02c"
$Notes510 = $location &"\Main\Lotus_Notes_5.10a\Setup.exe -s -f1 SETUP.ISS"
$Notes510_comment = "Lotus Notes 5.10a"
$Main = $location &"\Files\Main.bat"
$Main_comment = "Windows - Personalizacja"
$OfficeXP = $location &"\Main\Microsoft_OfficeXP\setup.exe TRANSFORMS=Unattended.MST /qb-"
$OfficeXP_comment = "Microsoft Office XP"
$Office2003 = $location &"\Advanced\Microsoft_Office2003\setup.exe TRANSFORMS=Unattended.MST /qb-"
$Office2003_comment = "Microsoft Office 2003"
$Project2003 = $location &"\Advanced\Microsoft_Project2003\setup.exe TRANSFORMS=Unattended.MST /qb-"
$Project2003_comment = "Microsoft Project 2003"
$Symantec = $location &"\Main\Symantec_Antivirus\Symantec_AntiVirus.msi /qn RUNLIVEUPDATE=0 REBOOT=REALLYSUPPRESS"
$Symantec_comment = "Symantec Antivirus 10"
$Visio2003 = $location &"\Advanced\Microsoft_Visio2003\setup.exe TRANSFORMS=Unattended.MST /qb-"
$Visio2003_comment = "Microsoft Visio 2003"
$Vpn = $location &"\Main\Cisco_VPN\setup.exe"
$Vpn_comment = "Vpn Client 4.7"



While 1
   $msg = GUIGetMsg()
   Select
     Case $msg = $GUI_EVENT_CLOSE
         FileRecycle ("C:\Windows\Temp.gif")
         Exit
     Case $msg = $radio_1
         GUICtrlSetState($group_3, $GUI_SHOW)
         GUICtrlSetData($group_3, "Do zainstalowania:")
         GUICtrlSetData( $Label1, $7zip_comment)
         GUICtrlSetData( $Label2, $Adobe7_comment)
         GUICtrlSetData( $Label3, $Notes502_comment)
         GUICtrlSetData( $Label4, $OfficeXP_comment)
         GUICtrlSetData( $Label5, $Symantec_comment)
         GUICtrlSetData( $Label6, $Main_comment)
         GUICtrlSetData( $Label7, "")
         GUICtrlSetData( $Label8, "")
         GUICtrlSetData( $Label9, "")
     Case $msg = $radio_2
         GUICtrlSetState($group_3, $GUI_SHOW)
         GUICtrlSetData($group_3, "Do zainstalowania:")
         GUICtrlSetData( $Label1, $7zip_comment)
         GUICtrlSetData( $Label2, $Adobe7_comment)
         GUICtrlSetData( $Label3, $Notes502_comment)
         GUICtrlSetData( $Label4, $OfficeXP_comment)
         GUICtrlSetData( $Label5, $Symantec_comment)
         GUICtrlSetData( $Label6, $Main_comment)
         GUICtrlSetData( $Label7, $Vpn_comment)
         GUICtrlSetData( $Label8, "")
         GUICtrlSetData( $Label9, "")
     Case $msg = $radio_3
         GUICtrlSetState($group_3, $GUI_SHOW)
         GUICtrlSetData($group_3, "Do zainstalowania:")
         GUICtrlSetData( $Label1, $7zip_comment)
         GUICtrlSetData( $Label2, $Adobe7_comment)
         GUICtrlSetData( $Label3, $Notes510_comment)
         GUICtrlSetData( $Label4, $Office2003_comment)
         GUICtrlSetData( $Label5, $Symantec_comment)
         GUICtrlSetData( $Label6, $Main_comment)
         GUICtrlSetData( $Label7, "")
         GUICtrlSetData( $Label8, "")
         GUICtrlSetData( $Label9, "")
     Case $msg = $radio_4
         GUICtrlSetState($group_3, $GUI_SHOW)
         GUICtrlSetData($group_3, "Do zainstalowania:")
         GUICtrlSetData( $Label1, $7zip_comment)
         GUICtrlSetData( $Label2, $Adobe7_comment)
         GUICtrlSetData( $Label3, $Notes510_comment)
         GUICtrlSetData( $Label4, $Office2003_comment)
         GUICtrlSetData( $Label5, $Symantec_comment)
         GUICtrlSetData( $Label6, $Main_comment)
         GUICtrlSetData( $Label7, $Vpn_comment)
         GUICtrlSetData( $Label8, "")
         GUICtrlSetData( $Label9, "")
     Case $msg = $radio_5
         GUICtrlSetState($group_3, $GUI_SHOW)
         GUICtrlSetData($group_3, "Do zainstalowania:")
         GUICtrlSetData( $Label1, $7zip_comment)
         GUICtrlSetData( $Label2, $Adobe7_comment)
         GUICtrlSetData( $Label3, $Notes510_comment)
         GUICtrlSetData( $Label4, $Office2003_comment)
         GUICtrlSetData( $Label5, $Project2003_comment)
         GUICtrlSetData( $Label6, $Visio2003_comment)
         GUICtrlSetData( $Label7, $Symantec_comment)
         GUICtrlSetData( $Label8, $Main_comment)
         GUICtrlSetData( $Label9, "")
     Case $msg = $radio_6
         GUICtrlSetState($group_3, $GUI_SHOW)
         GUICtrlSetData($group_3, "Do zainstalowania:")
         GUICtrlSetData( $Label1, $7zip_comment)
         GUICtrlSetData( $Label2, $Adobe7_comment)
         GUICtrlSetData( $Label3, $Notes510_comment)
         GUICtrlSetData( $Label4, $Office2003_comment)
         GUICtrlSetData( $Label5, $Project2003_comment)
         GUICtrlSetData( $Label6, $Visio2003_comment)
         GUICtrlSetData( $Label7, $Symantec_comment)
         GUICtrlSetData( $Label8, $Main_comment)
         GUICtrlSetData( $Label9, $Vpn_comment)
        Case $msg = $button_1 AND BitAnd(GUICtrlRead($radio_1),$GUI_CHECKED) = $GUI_CHECKED
         RunWait($7zip, "")
         RunWait(@ComSpec & " /c " & $Adobe7, "", @SW_HIDE)
         RunWait($Notes502, "")
         RunWait($OfficeXP, "")
         RunWait(@ComSpec & " /c " & $Symantec, "", @SW_HIDE)
         RunWait($Main, "")
         Exit
      Case $msg = $button_1 AND BitAnd(GUICtrlRead($radio_2),$GUI_CHECKED) = $GUI_CHECKED
         RunWait($7zip, "")
         RunWait(@ComSpec & " /c " & $Adobe7, "", @SW_HIDE)
         RunWait($Notes502, "")
         RunWait($OfficeXP, "")
         RunWait(@ComSpec & " /c " & $Symantec, "", @SW_HIDE)
         RunWait($Vpn, "")
         RunWait($Main, "")
         Exit
        Case $msg = $button_1 AND BitAnd(GUICtrlRead($radio_3),$GUI_CHECKED) = $GUI_CHECKED
         RunWait($7zip, "")
         RunWait(@ComSpec & " /c " & $Adobe7, "", @SW_HIDE)
         RunWait($Notes510, "")
         RunWait($Office2003, "")
         RunWait(@ComSpec & " /c " & $Symantec, "", @SW_HIDE)
         RunWait($Main, "")
         Exit
      Case $msg = $button_1 AND BitAnd(GUICtrlRead($radio_4),$GUI_CHECKED) = $GUI_CHECKED
         RunWait($7zip, "")
         RunWait(@ComSpec & " /c " & $Adobe7, "", @SW_HIDE)
         RunWait($Notes510, "")
         RunWait($Office2003, "")
         RunWait(@ComSpec & " /c " & $Symantec, "", @SW_HIDE)
         RunWait($Vpn, "")
         RunWait($Main, "")
         Exit
        Case $msg = $button_1 AND BitAnd(GUICtrlRead($radio_5),$GUI_CHECKED) = $GUI_CHECKED
         RunWait($7zip, "")
         RunWait(@ComSpec & " /c " & $Adobe7, "", @SW_HIDE)
         RunWait($Notes510, "")
         RunWait($Office2003, "")
         RunWait($Project2003, "")
         RunWait($Visio2003, "")
         RunWait(@ComSpec & " /c " & $Symantec, "", @SW_HIDE)
         RunWait($Main, "")
         Exit
      Case $msg = $button_1 AND BitAnd(GUICtrlRead($radio_6),$GUI_CHECKED) = $GUI_CHECKED
         RunWait($7zip, "")
         RunWait(@ComSpec & " /c " & $Adobe7, "", @SW_HIDE)
         RunWait($Notes510, "")
         RunWait($Office2003, "")
         RunWait($Project2003, "")
         RunWait($Visio2003, "")
         RunWait(@ComSpec & " /c " & $Symantec, "", @SW_HIDE)
         RunWait($Vpn, "")
         RunWait($Main, "")
         Exit
     Case $msg = $radio_7
         GUICtrlSetState($wybor, $GUI_SHOW)  
   EndSelect
WEnd

I'm sure i have to add it somewhere in

Case $msg = $button_1 AND BitAnd(GUICtrlRead($radio_1),$GUI_CHECKED) = $GUI_CHECKED

but i don't realy have a clue how to do it.

Muchos tnx to any help :lmao:


My little company: Evotec (PL version: Evotec)

Share this post


Link to post
Share on other sites



Hehe, my questions seems always either too hard or just unclear. Would be nice if someone tell me what i'm doing wrong that posts like this aren't taken into consideration for help ;p If someone would just 'show me' the way i'll try going it but having no responses at all makes me wonder it's realy hard to add progress bar to my app ;p Maybe just polish comments should be in english. Just lemme know how i could fix my post so it would be easier for you guys to try to help me :lmao:

With Regards,


My little company: Evotec (PL version: Evotec)

Share this post


Link to post
Share on other sites

Here is an example

;progress bar example

#include <GUIConstants.au3>
$GUI1=GUICreate(" Progress Bar",600,200,-1, -1, -1)
GUISetState () 

$progressbar1 = GUICtrlCreateProgress (120,125,455,20,$PBS_SMOOTH)
GUICtrlSetColor(-1,8421504)
$i_stop= 1000
For $i_Loop = 1 to $i_stop
    $p=100*$i_Loop/$i_stop
        GUICtrlSetData ($progressbar1,$p)
    sleep(2)    
Next

While 1
    $msg = GUIGetMsg()
    If $msg = $GUI_EVENT_CLOSE Then ExitLoop
Wend

Share this post


Link to post
Share on other sites

Hehe, my questions seems always either too hard or just unclear. Would be nice if someone tell me what i'm doing wrong that posts like this aren't taken into consideration for help ;p If someone would just 'show me' the way i'll try going it but having no responses at all makes me wonder it's realy hard to add progress bar to my app ;p Maybe just polish comments should be in english. Just lemme know how i could fix my post so it would be easier for you guys to try to help me :lmao:

With Regards,

You are installing a set of programs based on a user choice, Yes?

I don't really see how you can run a progress during the installation of individual programs because I can't think of anyway you would know how long each installer would take or where exactly it is in the installation.

You could have a progress bar which moves up after each part is installed.

You would need to create a progress bar, ProgressOn() then after each application install is completed you devide the number of completed applications by the amount of total applications to install x 100, this would give you the completed percentage. Then use ProgressSet() to set the new percentage.

Share this post


Link to post
Share on other sites

You are installing a set of programs based on a user choice, Yes?

I don't really see how you can run a progress during the installation of individual programs because I can't think of anyway you would know how long each installer would take or where exactly it is in the installation.

You could have a progress bar which moves up after each part is installed.

You would need to create a progress bar, ProgressOn() then after each application install is completed you devide the number of completed applications by the amount of total applications to install x 100, this would give you the completed percentage. Then use ProgressSet() to set the new percentage.

There are few options there to install new software. First is too choose one of the profiles (depends on the user if he has laptop or not, if he is director or just normal user) and there is also choice menu where you can choose what you want to be installed (it's not yet started so this isn't the issue ;p).

And Yes i would like the progress bar to move every part is installed.

peter1234 - i know there are lots and lots of progress bar examples, problem is i don't realy know how to add them into my script :lmao:

Well anyways i'll try to play with my script today and add it ;)


My little company: Evotec (PL version: Evotec)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0