Problem With Closing Gui But Not The Program Itself

[MadBoy 3]

Heylo, need help once again The code below is supposed to start UDP service and wait for UDP signal.. when it receives it GUI BOX shows up with a button to press. WHen you either press it, or it timeouts or just exit with ESC it closes the GUI but the program is still running waiting for another udp signal. And now:

ExitLoop doesnt work at all in my case

GUISetState (@SW_HIDE, $GUISend) - just hides the GUI and if signal comes first then i have to wait for the Until time to pass so the next gui shows up. If more then one signal comes in i would like to receive another gui .. so even if application will get 3 udp signals i will have 3 GUI Windows open up.

Also Exit isn't good in that case because it kills the program.

Any help will be appreciated.

expandcollapse popup

#include <GUIConstants.au3>

Dim $autor = "Me", $version = "0.1"
Dim $settings = @ScriptDir & "\UdpSend.ini"
Dim $udp_ip = IniRead($settings, "INFO", "udp_ip", "")
Dim $udp_port = IniRead($settings, "INFO", "udp_port", "")
Dim $udp_password = IniRead($settings, "INFO", "udp_password", "")
Dim $udp_command = IniRead($settings, "INFO", "udp_command", "")
Dim $position1 = 5, $position2 = 10, $nr_button1 = 30, $nr_button2 = 50
Dim $button[10], $label[10]
;==============Build GUI=============================================
$GUISend = GUICreate("UDP Reciver/Sender " & $autor & " - version " & $version, 600,200)
WinSetOnTop ( $GUISend, "", 1 )
$button[1] = GUICtrlCreateButton ("Send Me", $nr_button1, $nr_button2, 540, 120, $BS_DEFPUSHBUTTON)
$label[1]= GuiCtrlCreateInput("", $position1, $position2, 590, 20)


; Start The UDP Services
;==============================================
UDPStartup()
$socket_incoming = UDPBind("127.0.0.1", 4455)
If @error <> 0 Then Exit
$socket_outgoing = UDPOpen($udp_ip, $udp_port)
If @error <> 0 Then Exit

While 1
    $udp_receive_data = UDPRecv($socket_incoming, 2046)
    If $udp_receive_data <> "" Then
        GUISetState (@SW_SHOW, $GUISend)
       ;MsgBox(0, "UDP DATA", $udp_receive_data, 20)
        $udp_receive_data = StringStripWS ( $udp_receive_data, 8 )
        GUICtrlSetData( $Label[1], $udp_receive_data)
        $time = TimerInit(); start timer
        Do
        $msg = GUIGetMsg()
        Select
            Case $msg = $GUI_EVENT_CLOSE 
                ExitLoop
               ;GUISetState (@SW_HIDE, $GUISend)
            Case $msg = $button[1]
                If $udp_password = 0 Then
                   ;$status = UDPSend($socket_outgoing, $udp_command & " " & $udp_receive_data)
                    MsgBox(1,1,1)
                    GUISetState (@SW_HIDE, $GUISend)
                Else
                   ;$status = UDPSend($socket_outgoing, $udp_command & " " & $udp_password & " " & $udp_receive_data)
                EndIf
            
               ;Exit
            EndSelect
        Until TimerDiff($time) > 8000; check timeout
    EndIf
    sleep(100)
WEnd

Func OnAutoItExit()
    UDPCloseSocket($socket_incoming)
    UDPCloseSocket($socket_outgoing)
    UDPShutdown()
EndFunc

[BigDod 521]

I have not studied your code but from the description perhaps GUIDelete is the command you should use.

[JSThePatriot 18]

GUIDelete, and put your GUI in a function so it can be called when necissary (sp).

My recommendations,

JS

[MadBoy 3]

I have not studied your code but from the description perhaps GUIDelete is the command you should use.

Tnx, That solves some but not all problems. I moved the Gui create into the loop so it will be recreated after it's deleted when i close it and when another UDP signal comes in. GUI Delete was working fine. I also added Exit Loop after GUI delete command. But now if i send multiple UDP lines into the script like 5 in 1 after another or so. Only one shows up at the time (that's okey i guess and can live with it) but after i close like 4 .. the last one doesn't want to be closed in any way.

expandcollapse popup

#include <GUIConstants.au3>

Dim $autor = "Me", $version = "0.1"
Dim $settings = @ScriptDir & "\UdpSend.ini"
Dim $udp_ip = IniRead($settings, "INFO", "udp_ip", "")
Dim $udp_port = IniRead($settings, "INFO", "udp_port", "")
Dim $udp_password = IniRead($settings, "INFO", "udp_password", "")
Dim $udp_command = IniRead($settings, "INFO", "udp_command", "")
Dim $position1 = 5, $position2 = 10, $nr_button1 = 30, $nr_button2 = 50
Dim $button[10], $label[10]
;==============Build GUI=============================================



; Start The UDP Services
;==============================================
UDPStartup()
$socket_incoming = UDPBind("127.0.0.1", 65532)
If @error <> 0 Then Exit
$socket_outgoing = UDPOpen($udp_ip, $udp_port)
If @error <> 0 Then Exit

While 1
    $udp_receive_data = UDPRecv($socket_incoming, 2046)
    If $udp_receive_data <> "" Then
        $GUISend = GUICreate("UDP Reciver/Sender  " & $autor & " - version " & $version, 600,200)
        WinSetOnTop ( $GUISend, "", 1 )
        $button[1] = GUICtrlCreateButton ("SendMe", $nr_button1, $nr_button2, 540, 120, $BS_DEFPUSHBUTTON)
        $label[1]= GuiCtrlCreateInput("", $position1, $position2, 590, 20)
        GUISetState (@SW_SHOW, $GUISend)
        $udp_receive_data = StringStripWS ( $udp_receive_data, 8 )
        GUICtrlSetData( $Label[1], $udp_receive_data)
        $time = TimerInit(); start timer
        Do
        $msg = GUIGetMsg()
        Select
            Case $msg = $GUI_EVENT_CLOSE 
                GUIDelete($GUISend)
                ExitLoop
            Case $msg = $button[1]
                If $udp_password = 0 Then
                    $status = UDPSend($socket_outgoing, $udp_command & " " & $udp_receive_data)
                Else
                    $status = UDPSend($socket_outgoing, $udp_command & " " & $udp_password & " " & $udp_receive_data)
                EndIf
                GUIDelete($GUISend)
                ExitLoop
            EndSelect
        Until TimerDiff($time) > 8000; check timeout
    EndIf
    sleep(100)
WEnd

Func OnAutoItExit()
    UDPCloseSocket($socket_incoming)
    UDPCloseSocket($socket_outgoing)
    UDPShutdown()
EndFunc