Jump to content

Minesweeper bot: Advanced level in 1 second


Recommended Posts

What do you think? Do you like it? :P :P

It solves minesweeper in only 1 second, and it's only 15 lines long! :)

WinWaitActive("Minesweeper")
WinGetHandle("Minesweeper")
WinMove("Minesweeper", "", 229, 187)

Send("xyzzy{LSHIFT}{ENTER}")
For $i = 0 To $m
            MouseMove(251, 299 + $i * 16, $speed)
            For $k = 0 To $n
                MouseMove(251 + $k * 16, 299 + $i * 16, $speed)
                $x = PixelGetColor(0, 0)
                If $x = 16777215 Then
                    MouseClick("left")
                Else
                    MouseClick("right")
                EndIf
            Next
        NextoÝ÷ Úȳz쥩ì·)^
Edited by Kiti
Link to post
Share on other sites
  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

What do you think? Do you like it? :P :P

It solves minesweeper in only 2 seconds, and it's only 15 lines long! :)

Run(@SystemDir & "\winmine.exe")
WinWaitActive("Minesweeper")
WinGetHandle("Minesweeper")
WinMove("Minesweeper", "", 229, 187)
Send("xyzzy{LSHIFT}{ENTER}")
For $i = 0 To 8
    MouseMove(251, 299 + $i * 16, 0)
    For $k = 0 To 8
        MouseMove(251 + $k * 16, 299 + $i * 16, 0)
        $x = PixelGetColor(0, 0)
        If $x = 16777215 Then
            MouseClick("left")
        EndIf
    Next
Next
doesnt work on Vista.
[u][font="Century Gothic"]~я α и d γ ĵ . ċ . ѕ қ ϊ и и ε я~- My Programs -auto shutdownSleep funcdisallow programs[/font][/u]
Link to post
Share on other sites

doesnt work on Vista.

I didn't ever had vista, but I'm sure that's because it's called in a diffrent way. Do this:

1. Open Minesweeper.

2.Run this:

WinWaitActive("Minesweeper")
WinGetHandle("Minesweeper")
WinMove("Minesweeper", "", 229, 187)
Send("xyzzy{LSHIFT}{ENTER}")
For $i = 0 To 7
    MouseMove(251, 299 + $i * 16, 0)
    For $k = 0 To 7
        MouseMove(251 + $k * 16, 299 + $i * 16, 0)
        $x = PixelGetColor(0, 0)
        If $x = 16777215 Then
            MouseClick("left")
        EndIf
    Next
Next

3.Maximize Minesweeper.

Easy guide in three steps :))

Link to post
Share on other sites

I didn't ever had vista, but I'm sure that's because it's called in a diffrent way. Do this:

1. Open Minesweeper.

2.Run this:

WinWaitActive("Minesweeper")
WinGetHandle("Minesweeper")
WinMove("Minesweeper", "", 229, 187)
Send("xyzzy{LSHIFT}{ENTER}")
For $i = 0 To 7
    MouseMove(251, 299 + $i * 16, 0)
    For $k = 0 To 7
        MouseMove(251 + $k * 16, 299 + $i * 16, 0)
        $x = PixelGetColor(0, 0)
        If $x = 16777215 Then
            MouseClick("left")
        EndIf
    Next
Next

3.Maximize Minesweeper.

Easy guide in three steps :))

nope, also, you cant maximize it on vista :P
[u][font="Century Gothic"]~я α и d γ ĵ . ċ . ѕ қ ϊ и и ε я~- My Programs -auto shutdownSleep funcdisallow programs[/font][/u]
Link to post
Share on other sites

not maximze, just unminimze... you have 400 posts... is it that hard to get it? or you just want to laugh at me? :)

no, I know what you mean, but the entire layout is different,

anyone try this on XP?

the oddly colored one is the one my mouse is over...

Posted Image

[u][font="Century Gothic"]~я α и d γ ĵ . ċ . ѕ қ ϊ и и ε я~- My Programs -auto shutdownSleep funcdisallow programs[/font][/u]
Link to post
Share on other sites

Actually "xyzzy" is a cheat code for Minesweeper. It will activate a pixel on the left (or right ... not sure) upper part of the screen. When the mouse cursor is over a square with a bomb the pixel will change color to a bright one, when the cursor is over a free square (no bomb) the pixel will stay dark.

I haven't used this for a long time - I know it was possible in Win 3.1 and Win 95 but I had no idea it still worked (that's why I'm not sure about details).

Basically what Kiti does is move the cursor over the table and checks the pixel color - if the pixel says "no bomb" it will left-click and move to next one.

Nice one Kiti :) ... but not a real AI here :P

Edited by enaiman

SNMP_UDF ... for SNMPv1 and v2c so far, GetBulk and a new example script

wannabe "Unbeatable" Tic-Tac-Toe

Paper-Scissor-Rock ... try to beat it anyway :)

Link to post
Share on other sites
  • Moderators

What do you think? Do you like it? :P :P

It solves minesweeper in only 2 seconds, and it's only 15 lines long! :)

Run(@SystemDir & "\winmine.exe")
WinWaitActive("Minesweeper")
WinGetHandle("Minesweeper")
WinMove("Minesweeper", "", 229, 187)
Send("xyzzy{LSHIFT}{ENTER}")
For $i = 0 To 8
    MouseMove(251, 299 + $i * 16, 0)
    For $k = 0 To 8
        MouseMove(251 + $k * 16, 299 + $i * 16, 0)
        $x = PixelGetColor(0, 0)
        If $x = 16777215 Then
            MouseClick("left")
        EndIf
    Next
NextoÝ÷ ØGbµ.q©Ü©àyº-Ø^Ó~¢jwtß©-¢«¨µ:5櫨µú+¶¢×«çbj×¥z÷¥æÇ¢wlbjw!jxÓ~¢¶®¢Ôè×®¢Ö§wMúÚ*ºS£ojº_¢»ay§ojwvW¯z_,'vÏêº^b¢é]±ëmí7ë§wMúÉ·¥£"¶(ëaxºËhX¤zë"¢g­>-¢­¶¬7¨~Ø^Â)Ý£§vØ^Ø^Ó~²NyÂ¥vZ(X¤{MúÉ:4ß©Ø^®Ú+²¶§(ºWgßÛ`zܨº»-£
+)â¶&¥&î¶Þ¶§ý½çèºwh½êíg¢²'ò¢ë¬yÉbz{¢Ý²¶­êí©ìr·Ê(­Û0é鬢"¶¬¥ç"~'0whÂØb ¢kɨ¢Ø^­«­¢+Øí͹¥ÁÁ¸¸¸Í½Ñ¡ÈáµÁ±
Edited by SmOke_N
revision

Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer.

Link to post
Share on other sites

It's very cool, SmOke_N. But 1/2 times I run it, it marks all cells as bombs. I thought of a way of highly increasing the speed, and maybe I'll achieve better timings. I'm working on it and I'll post something in like 2 or 3 hours. :)

Link to post
Share on other sites

This is my second script. I thought it would be much faster, because it moves in a spiral shape, tangent to the interior edges of the cells, so the mouse is moved for an extremely less distance than the first script. Although, it makes 2 secods as well :P . You can run it in notepad while pressing the mouse, and empty the check function, to see what a beautiful and perfect spiral it does. :D Any ideea why it's not faster? :)

Opt("MouseClickDelay", 0)
Opt("MouseClickDownDelay", 0)
Run(@SystemDir & "\winmine.exe")
WinWaitActive("Minesweeper")
WinGetHandle("Minesweeper")
WinMove("Minesweeper", "", 229, 187)
Send("xyzzy{LSHIFT}{ENTER}")

Global $sp = 0 ; speed

For $a = 0 To 7
    MouseMove(259 + $a * 16, 306, $sp)
    _check()
Next
For $b = 0 To 7
    MouseMove(372, 306 + $b * 16, $sp)
    _check()
Next
For $c = 0 To 7
    MouseMove(372 - $c * 16, 419, $sp)
    _check()
Next
For $d = 0 To 6
    MouseMove(259, 419 - $d * 16, $sp)
    _check()
Next
For $e = 0 To 6
    MouseMove(259 + $e * 16, 322, $sp)
    _check()
Next
For $f = 0 To 5
    MouseMove(356, 322 + $f * 16, $sp)
    _check()
Next
For $g = 0 To 5
    MouseMove(356 - $g * 16, 403, $sp)
    _check()
Next
For $h = 0 To 4
    MouseMove(275, 403 - $h * 16, $sp)
    _check()
Next
For $i = 0 To 4
    MouseMove(275 + $i * 16, 338, $sp)
    _check()
Next
For $j = 0 To 3
    MouseMove(340, 338 + $j * 16, $sp)
    _check()
Next
For $k = 0 To 3
    MouseMove(340 - $k * 16, 387, $sp)
    _check()
Next
For $l = 0 To 2
    MouseMove(291, 387 - $l * 16, $sp)
    _check()
Next
For $m = 0 To 2
    MouseMove(291 + $m * 16, 354, $sp)
    _check()
Next
For $n = 0 To 1
    MouseMove(324, 354 + $n * 16, $sp)
    _check()
Next
For $o = 0 To 1
    MouseMove(324 - $o * 16, 371, $sp)
    _check()
Next
MouseMove(307, 371, $sp)
_check()
MouseMove(307, 370, $sp)
_check()
MouseMove(308, 370, $sp)
_check()

Func _check()
    $x = PixelGetColor(0, 0)
    If $x = 16777215 Then
        MouseClick("left")
    EndIf
EndFunc   ;==>_check

Edit: When you press a cell, much more empty blocks are turning gray. Now I'm working at a version that avoids them. This has to be fast...

Edit2: Lol Why no one told me that if I add mousedelay 0 the script will finish in 1 second ?

I thought this is possible only by a spiral shape, or by getting the client choords. So I lost a full day by measuring that spiral. :P I've edited both scripts and they finish in a second :mad:

Edited by Kiti
Link to post
Share on other sites
  • Moderators

It's very cool, SmOke_N. But 1/2 times I run it, it marks all cells as bombs. I thought of a way of highly increasing the speed, and maybe I'll achieve better timings. I'm working on it and I'll post something in like 2 or 3 hours. :)

Put this after the "Next"

ControlSend("[CLASS:Minesweeper]", "", "", "xyzzy+{ENTER}")oÝ÷ ØGbµ8b³¬z÷§}«-z´Z­}µßV®¶­sd÷BgV÷C´Ö÷W6T6ö÷&DÖöFRgV÷C²Â"¤÷BgV÷C´Ö÷W6T6Æ6´FVÆgV÷C²Â¤÷BgV÷C´Ö÷W6T6Æ6´F÷väFVÆgV÷C²Â¤÷BgV÷CµVÄ6ö÷&DÖöFRgV÷C²Â"¤Æö6Âb33c¶FW6·F÷ÒvävWDæFÆRgV÷Cµ´4Ä53¥v÷&¶W%uÒgV÷C²¤Æö6Âb33c¶ÖæU7vVWÒvävWDæFÆRgV÷Cµ´4Ä53¤ÖæW7vVWW%ÒgV÷C²¥våvD7FfRb33c¶ÖæU7vVW¤Æö6Âb33c¶u÷2ÒvävWE÷2b33c¶ÖæU7vVW ¤b4'&b33c¶u÷2ÒFVâW@¤Æö6Âb33c·GRÒRÂb33c·GRÂb33c·Âb33c·Âb33c·2Âb33c·2Âb33c¶÷@ ¤bb33c¶u÷5³%ÒfwC²SFVà¢b33c·GRÒ#¤VÇ6Tbb33c¶u÷5³%ÒfwC²#FVà¢b33c·GRÒP¤VÇ6P¢b33c·GRÒ¢b33c·GRÒ¤VæD` ¤6öçG&öÅ6VæBgV÷Cµ´4Ä53¤ÖæW7vVWW%ÒgV÷C²ÂgV÷C²gV÷C²ÂgV÷C²gV÷C²ÂgV÷C·§§·´TåDU'ÒgV÷C²¤f÷"b33c·ÒFòb33c·GP f÷"b33c·ÒFòb33c·GP b33c·2ÒB²b33c·¢b b33c·2ÒSr²b33c·¢b Ö÷W6TÖ÷fRb33c·2Âb33c·2 bVÄvWD6öÆ÷"b33c·2ÓÂb33c·2Âb33c¶ÖæU7vVWÓÒdddddbFVà bVÄvWD6öÆ÷"ÂÂb33c¶FW6·F÷ÓÒdddddbFVà Ö÷W6T6Æ6²gV÷C·&Ö'gV÷C²Âb33c·2Âb33c·2 VÇ6P Ö÷W6T6Æ6²gV÷C·6V6öæF'gV÷C²Âb33c·2Âb33c·2 VæD` VæD` æW@¤æW@¤6öçG&öÅ6VæBgV÷Cµ´4Ä53¤ÖæW7vVWW%ÒgV÷C²ÂgV÷C²gV÷C²ÂgV÷C²gV÷C²ÂgV÷C·§§·´TåDU'ÒgV÷C²oÝ÷ ØGb·c«jëh×6Opt("MouseCoordMode", 2)
Opt("MouseClickDelay", 0)
Opt("MouseClickDownDelay", 0)
Opt("PixelCoordMode", 2)
Local $hDesktop = WinGetHandle("[CLASS:WorkerW]")
Local $hMineSweep = WinGetHandle("[CLASS:Minesweeper]")
WinWaitActive($hMineSweep)
Local $aWPos = WinGetPos($hMineSweep)

If IsArray($aWPos) = 0 Then Exit
Local $ytype = 15, $xtype, $y, $x, $xc, $yc, $opt

If $aWPos[2] > 500 Then
    $xtype = 29
ElseIf $aWPos[2] > 200 Then
    $xtype = 15
Else
    $ytype = 8
    $xtype = 8
EndIf

ControlSend("[CLASS:Minesweeper]", "", "", "xyzzy+{ENTER}")
For $y = 0 To $ytype
    For $x = 0 To $xtype
        $xc = 14 + ($x * 16)
        $yc = 57 + ($y * 16)
        PixelSearch($xc - 1, $yc, $xc - 1, $yc, 0xFFFFFF, 0, 14, $hMineSweep)
        If Not @error Then
            MouseMove($xc, $yc, 0)
            If (PixelGetColor(0, 0, $hDesktop) == 0xFFFFFF) Then
                MouseClick("primary", $xc, $yc, 1, 0)
            Else
                MouseClick("secondary", $xc, $yc, 1, 0)
            EndIf
        EndIf
    Next
Next
ControlSend("[CLASS:Minesweeper]", "", "", "xyzzy+{ENTER}")

I suppose there are a ton of things you could do... I'm done though lol.

Edited by SmOke_N

Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer.

Link to post
Share on other sites

try under windows xp, but doesn't work...

anyone can help me ?

Run this:

Run(@SystemDir & "\winmine.exe")
WinWaitActive("Minesweeper")
Opt("MouseClickDelay", 0)
Opt("MouseClickDownDelay", 0)
WinGetHandle("Minesweeper")
WinMove("Minesweeper", "", 229, 187)
Send("xyzzy{LSHIFT}{ENTER}")
For $i = 0 To 8
    MouseMove(251, 299 + $i * 16, 0)
    For $k = 0 To 8
        MouseMove(251 + $k * 16, 299 + $i * 16, 0)
        $x = PixelGetColor(0, 0)
        If $x = 16777215 Then
            MouseClick("left")
        EndIf
    Next
Next

Are you sure you have minesweeper installed? I also had a SP2 windows which hadn't had any game, calculator or paint.

If you have it, why it's not working? Minesweeper does not start? It starts but nothing happens? It clicks on mines? It doesn't click in the area of the screen where the minesweeper is?

Link to post
Share on other sites

Edit2: Lol Why no one told me that if I add mousedelay 0 the script will finish in 1 second ?

I thought this is possible only by a spiral shape, or by getting the client choords. So I lost a full day by measuring that spiral. :) I've edited both scripts and they finish in a second :D

:P "Intellectuals solve problems, geniuses prevent them." - Doesn't count for you then :P
Link to post
Share on other sites
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...