Jump to content

Simple gui trouble


Recommended Posts

This might very well be an easy question, but i've watched myself blind on my script so i cant find the error.

When i try to run the script, the GUI menu ($FormMenu = GUICreate("Gnu's little helper", 457, 376, 263, 271)) doesnt open. (Line 28)

HotKeySet ("q", "PAUSE")

#include <GUIConstants.au3>
#Include <Constants.au3>

Opt("TrayMenuMode",1)
Opt("GUICloseOnESC", 1)

#Region TRAYitem
$aboutitem  = TrayCreateItem("Donate")
TrayCreateItem("")
$exititem   = TrayCreateItem("Exit")

While 1
    $msg = TrayGetMsg()
    Select
        Case $msg = 0
            ContinueLoop
        Case $msg = $aboutitem
            Msgbox(64, "Donate:", "GeekS on D2JSP")
        Case $msg = $exititem
            Exit
    EndSelect
WEnd
#EndRegion

#Region ### START Koda GUI section ### Form=
$FormMenu = GUICreate("Gnu's little helper", 457, 376, 263, 271)
$Amazon = GUICtrlCreateButton("Amazon", 16, 24, 113, 41, $BS_BITMAP)
GUICtrlSetImage (-1, @WorkingDir&"\Images\Ama.bmp")
GUICtrlSetTip(-1,"Amazon informations")
$Assassin = GUICtrlCreateButton("Assassin", 16, 72, 113, 41, $BS_BITMAP)
GUICtrlSetImage (-1, @WorkingDir&"\Images\Assa.bmp")
GUICtrlSetTip(-1,"Assassin informations")
$Necromancer = GUICtrlCreateButton("Necromancer", 16, 120, 113, 41, $BS_BITMAP)
GUICtrlSetImage (-1, @WorkingDir&"\Images\Nec.bmp")
GUICtrlSetTip(-1,"Necromancer informations")
$Barbarian = GUICtrlCreateButton("Barbarian", 16, 168, 113, 41, $BS_BITMAP)
GUICtrlSetImage (-1, @WorkingDir&"\Images\Barb.bmp")
GUICtrlSetTip(-1,"Barbarian informations")
$Paladin = GUICtrlCreateButton("Paladin", 16, 216, 113, 41, $BS_BITMAP)
GUICtrlSetImage (-1, @WorkingDir&"\Images\Pala.bmp")
GUICtrlSetTip(-1,"Paladin informations")
$Sorceress = GUICtrlCreateButton("Sorceress", 16, 264, 113, 41, $BS_BITMAP)
GUICtrlSetImage (-1, @WorkingDir&"\Images\Sorc.bmp")
GUICtrlSetTip(-1,"Sorceress informations")
$Druid = GUICtrlCreateButton("Druid", 16, 312, 113, 41, $BS_BITMAP)
GUICtrlSetImage (-1, @WorkingDir&"\Images\Druid.bmp")
GUICtrlSetTip(-1,"Druid informations")
$CharExit = GUICtrlCreateButton("Exit", 392, 312, 50, 50, 0)
$Slider1 = GUICtrlCreateSlider(128, 320, 265, 33)
GUICtrlSetLimit(-1,10,0)
$Label1 = GUICtrlCreateLabel("Gnu-donation bar", 216, 352, 86, 17)
$Group1 = GUICtrlCreateGroup("Gnu's little helper.", 280, 16, 153, 137)
$Radio1 = GUICtrlCreateRadio("Welcome", 304, 48, 113, 17)
$Radio2 = GUICtrlCreateRadio("Velkommen", 304, 72, 113, 17)
$Radio3 = GUICtrlCreateRadio("Wilkommen", 304, 96, 113, 17)
$Radio4 = GUICtrlCreateRadio("Konochiha", 304, 120, 113, 17)
$contextmenu    = GUICtrlCreateContextMenu ()
$cry        = GUICtrlCreateMenuitem ("Cry", $contextmenu)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

$Msg = 0
While 1
    $Msg = GUIGetMsg()
    
    Select
         Case $msg = $Amazon
#Region ### START Koda GUI section ### Form=
$FormAmazon = GUICreate("Amazon", 633, 447, 285, 315)
$Button1 = GUICtrlCreateButton("FCR Bps", 528, 16, 89, 33, 0)
$Button2 = GUICtrlCreateButton("FHR Bps", 528, 56, 89, 33, 0)
$Button3 = GUICtrlCreateButton("FBR Bps 1hand", 528, 96, 89, 33, 0)
$Button5 = GUICtrlCreateButton("Exit", 520, 376, 97, 57, 0)
$Label1 = GUICtrlCreateLabel("Amazon", 16, 16, 42, 17)
$Button4 = GUICtrlCreateButton("FBR Bps 2hand", 528, 136, 89, 33, 0)
$Group1 = GUICtrlCreateGroup("Helm", 128, 56, 49, 89)
$Input1 = GUICtrlCreateInput("Fcr", 136, 72, 33, 21)
$Input2 = GUICtrlCreateInput("Fhr", 136, 96, 33, 21)
$Input3 = GUICtrlCreateInput("Res", 136, 120, 33, 21)
GUICtrlCreateGroup("", -99, -99, 1, 1)
$Group3 = GUICtrlCreateGroup("Amulet", 184, 56, 49, 89)
$Input4 = GUICtrlCreateInput("Fcr", 192, 72, 33, 21)
$Input5 = GUICtrlCreateInput("Fhr", 192, 96, 33, 21)
$Input6 = GUICtrlCreateInput("Res", 192, 120, 33, 21)
GUICtrlCreateGroup("", -99, -99, 1, 1)
$Group4 = GUICtrlCreateGroup("Weapon", 72, 160, 49, 89)
$Input7 = GUICtrlCreateInput("Fcr", 80, 176, 33, 21)
$Input8 = GUICtrlCreateInput("Fhr", 80, 200, 33, 21)
$Input9 = GUICtrlCreateInput("Res", 80, 224, 33, 21)
GUICtrlCreateGroup("", -99, -99, 1, 1)
$Group5 = GUICtrlCreateGroup("Armor", 128, 160, 49, 89)
$Input10 = GUICtrlCreateInput("Fcr", 136, 176, 33, 21)
$Input11 = GUICtrlCreateInput("Fhr", 136, 200, 33, 21)
$Input12 = GUICtrlCreateInput("Res", 136, 224, 33, 21)
GUICtrlCreateGroup("", -99, -99, 1, 1)
$Group6 = GUICtrlCreateGroup("Off-hand", 184, 160, 49, 89)
$Input13 = GUICtrlCreateInput("Fcr", 192, 176, 33, 21)
$Input14 = GUICtrlCreateInput("Fhr", 192, 200, 33, 21)
$Input15 = GUICtrlCreateInput("Res", 192, 224, 33, 21)
GUICtrlCreateGroup("", -99, -99, 1, 1)
$Group7 = GUICtrlCreateGroup("Gloves", 16, 264, 49, 89)
$Input16 = GUICtrlCreateInput("Fcr", 24, 280, 33, 21)
$Input17 = GUICtrlCreateInput("Fhr", 24, 304, 33, 21)
$Input18 = GUICtrlCreateInput("Res", 24, 328, 33, 21)
GUICtrlCreateGroup("", -99, -99, 1, 1)
$Group8 = GUICtrlCreateGroup("Ring 1", 72, 264, 49, 89)
$Input19 = GUICtrlCreateInput("Fcr", 80, 280, 33, 21)
$Input20 = GUICtrlCreateInput("Fhr", 80, 304, 33, 21)
$Input21 = GUICtrlCreateInput("Res", 80, 328, 33, 21)
GUICtrlCreateGroup("", -99, -99, 1, 1)
$Group9 = GUICtrlCreateGroup("Belt", 128, 264, 49, 89)
$Input22 = GUICtrlCreateInput("Fcr", 136, 280, 33, 21)
$Input23 = GUICtrlCreateInput("Fhr", 136, 304, 33, 21)
$Input24 = GUICtrlCreateInput("Res", 136, 328, 33, 21)
GUICtrlCreateGroup("", -99, -99, 1, 1)
$Group10 = GUICtrlCreateGroup("Ring 2", 184, 264, 49, 89)
$Input25 = GUICtrlCreateInput("Fcr", 192, 280, 33, 21)
$Input26 = GUICtrlCreateInput("Fhr", 192, 304, 33, 21)
$Input27 = GUICtrlCreateInput("Res", 192, 328, 33, 21)
GUICtrlCreateGroup("", -99, -99, 1, 1)
$Group11 = GUICtrlCreateGroup("Boots", 240, 264, 49, 89)
$Input28 = GUICtrlCreateInput("Fcr", 248, 280, 33, 21)
$Input29 = GUICtrlCreateInput("Fhr", 248, 304, 33, 21)
$Input30 = GUICtrlCreateInput("Res", 248, 328, 33, 21)
GUICtrlCreateGroup("", -99, -99, 1, 1)
$Group12 = GUICtrlCreateGroup("Charms", 88, 368, 129, 41)
$Input31 = GUICtrlCreateInput("Fcr", 96, 384, 33, 21)
$Input32 = GUICtrlCreateInput("Fhr", 136, 384, 33, 21)
$Input33 = GUICtrlCreateInput("Res", 176, 384, 33, 21)
GUICtrlCreateGroup("", -99, -99, 1, 1)
$Button6 = GUICtrlCreateButton("Your stats", 256, 184, 81, 57, 0)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###


$Msg = 0
While 1
    $Msg = GUIGetMsg()
    
    Select
        Case $msg = $GUI_EVENT_CLOSE
            GuiDelete ($FormAmazon) 
         Case $msg = $Button1
            MsgBox(0,"", "FCR Bps for Amazon is: 0, 7, 14, 22, 32, 48, 68, 99, 152", 5)
         Case $msg = $Button2
            MsgBox(0,"", "FHR Bps for Amazon is: 0, 6, 13, 20, 32, 52, 86, 174, 600", 5)
         Case $msg = $Button3
            MsgBox(0,"", "FBR Bps for Amazon 1hand is: 0, 4, 6, 11, 15, 23, 29, 40, 56, 80, 120, 200, 480", 5)
         Case $msg = $Button5
            GuiDelete ($FormAmazon)
         Case $msg = $Button4
            MsgBox(0,"", "FBR Bps for Amazon 2hand is: 0, 13, 32, 86, 600", 5)          
        Case $msg = $Button6

;; FCR CALCULATIONS
;;;0 7 14 22 32 48 68 99 152 
$FCRHelm = GUICtrlRead($Input1)
$FCRAmulet = GUICtrlRead($Input4)
$FCRWeapon = GUICtrlRead($Input7)
$FCRArmor = GUICtrlRead($Input10)
$FCRShield = GUICtrlRead($Input13)
$FCRGloves = GUICtrlRead($Input16)
$FCRRing1 = GUICtrlRead($Input19)
$FCRBelt = GUICtrlRead($Input22)
$FCRRing2 = GUICtrlRead($Input25)
$FCRBoots = GUICtrlRead($Input28)
$FCRCharms = GUICtrlRead($Input31)

$FCRTotal = $FCRHelm + $FCRAmulet + $FCRWeapon + $FCRArmor + $FCRShield + $FCRGloves + $FCRRing1 + $FCRBelt + $FCRRing2 + $FCRBoots + $FCRCharms

Dim $l[10] = ["",0,7,14,22,32,48,68,99,152]
$FCRBreakPoint = 152
For $i = 1 to 8
    If $FCRTotal >= $l[$i] And $FCRTotal < $l[$i + 1] Then $FCRBreakPoint = $l[$i]
Next

;; GUI READ TIL ANDEN COMMAND -- FHR

$FHRHelm = GUICtrlRead($Input2)
$FHRAmulet = GUICtrlRead($Input5)
$FHRWeapon = GUICtrlRead($Input8)
$FHRArmor = GUICtrlRead($Input11)
$FHRShield = GUICtrlRead($Input14)
$FHRGloves = GUICtrlRead($Input17)
$FHRRing1 = GUICtrlRead($Input20)
$FHRBelt = GUICtrlRead($Input23)
$FHRRing2 = GUICtrlRead($Input26)
$FHRBoots = GUICtrlRead($Input29)
$FHRCharms = GUICtrlRead($Input32)

$FHRTotal = $FHRHelm + $FHRAmulet + $FHRWeapon + $FHRArmor + $FHRShield + $FHRGloves + $FHRRing1 + $FHRBelt + $FHRRing2 + $FHRBoots + $FHRCharms

Dim $l[10] = ["", 0, 6, 13, 20, 32, 52, 86, 174, 600]
$FHRBreakPoint = 600
For $i = 1 to 8
    If $FHRTotal >= $l[$i] And $FHRTotal < $l[$i + 1] Then $FHRBreakPoint = $l[$i]
    Next
    
;; GUI READ TIL ANDEN COMMAND -- PRISMA

$RESHelm = GUICtrlRead($Input3)
$RESAmulet = GUICtrlRead($Input6)
$RESWeapon = GUICtrlRead($Input9)
$RESArmor = GUICtrlRead($Input12)
$RESShield = GUICtrlRead($Input15)
$RESGloves = GUICtrlRead($Input18)
$RESRing1 = GUICtrlRead($Input21)
$RESBelt = GUICtrlRead($Input24)
$RESRing2 = GUICtrlRead($Input27)
$RESBoots = GUICtrlRead($Input30)
$RESCharms = GUICtrlRead($Input33)

$RESTotal = $RESHelm + $RESAmulet + $RESWeapon + $RESArmor + $RESShield + $RESGloves + $RESRing1 + $RESBelt + $RESRing2 + $RESBoots + $RESCharms 

$RESHell = $RESTotal -100

#Region ### START Koda GUI section ### Form=C:\Documents and Settings\Lasse\Skrivebord\koda_1.7.0.1\Forms\Infoscreen.kxf
$FormStats = GUICreate("Stats", 273, 185, 191, 121)
$Group1 = GUICtrlCreateGroup("Your stats", 8, 8, 257, 169)
$Label1 = GUICtrlCreateLabel("Your faster cast rate:", 16, 24, 102, 17)
$Label2 = GUICtrlCreateLabel("Your faster cast rate breakpoint:", 16, 40, 155, 17)
$Label3 = GUICtrlCreateLabel("Your faster hit recovery:", 16, 80, 116, 17)
$Label4 = GUICtrlCreateLabel("Your faster hit recovery breakpoint:", 16, 96, 169, 17)
$Label5 = GUICtrlCreateLabel("Your all resistance:", 16, 136, 93, 17)
$Label6 = GUICtrlCreateLabel("Your all resistance on hell:", 16, 152, 127, 17)
$Label7 = GUICtrlCreateLabel($FCRTotal, 200, 24, 25, 17)
$Label8 = GUICtrlCreateLabel($FCRBreakpoint, 200, 40, 42, 17)
$Label9 = GUICtrlCreateLabel($FHRTotal, 200, 80, 26, 17)
$Label10 = GUICtrlCreateLabel($FHRBreakPoint, 200, 96, 43, 17)
$Label11 = GUICtrlCreateLabel($RESTotal, 200, 136, 26, 17)
$Label12 = GUICtrlCreateLabel($RESHell, 200, 152, 47, 17)
GUICtrlCreateGroup("", -99, -99, 1, 1)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

While 1
    $Msg = GUIGetMsg()
    Switch $Msg
        Case $GUI_EVENT_CLOSE
            GuiDelete ($FormStats)
    EndSwitch
WEnd
    EndSelect
WEnd
         Case $msg = $Assassin
#Region ### START Koda GUI section ### Form=
$FormAssassin = GUICreate("Form3", 633, 447, 285, 315)
$Button1 = GUICtrlCreateButton("FCR Bps", 528, 16, 89, 33, 0)
$Button2 = GUICtrlCreateButton("FHR Bps", 528, 56, 89, 33, 0)
$Button3 = GUICtrlCreateButton("FBR Bps", 528, 96, 89, 33, 0)
$Button5 = GUICtrlCreateButton("Exit", 520, 376, 97, 57, 0)
$Label1 = GUICtrlCreateLabel("Assassin", 16, 16, 45, 17)
$Button6 = GUICtrlCreateButton("Button6", 32, 144, 193, 249, 0)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###
$Msg = 0
While 1
    $Msg = GUIGetMsg()
    
    Select
                 Case $msg = $GUI_EVENT_CLOSE
            ExitLoop    
         Case $msg = $Button1
            MsgBox(0,"", "FCR Bps for Assassin is: 0, 8, 16, 27, 42, 65, 102, 174", 5)
         Case $msg = $Button2
            MsgBox(0,"", "FHR Bps for Assassin is: 0, 7, 15, 27, 48, 86, 200", 5)
         Case $msg = $Button3
            MsgBox(0,"", "FBR Bps for Assassin is: 0, 13, 32, 86, 600", 5)
         Case $msg = $Button5
            GUIDelete ($FormAssassin)
        Case $msg = $Button6
    EndSelect
WEnd
         Case $msg = $Necromancer
#Region ### START Koda GUI section ### Form=
$FormNecromancer = GUICreate("Form3", 633, 447, 285, 315)
$Button1 = GUICtrlCreateButton("FCR Bps", 528, 16, 89, 33, 0)
$Button2 = GUICtrlCreateButton("FCR Bps TO", 528, 56, 89, 33, 0)
$Button3 = GUICtrlCreateButton("FHR Bps", 528, 96, 89, 33, 0)
$Button5 = GUICtrlCreateButton("Exit", 520, 376, 97, 57, 0)
$Label1 = GUICtrlCreateLabel("Necromancer", 16, 16, 70, 17)
$Button6 = GUICtrlCreateButton("Button6", 32, 144, 193, 249, 0)
$Button4 = GUICtrlCreateButton("FBR Bps", 528, 136, 89, 33, 0)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###
$Msg = 0
While 1
    $Msg = GUIGetMsg()
    
    Select
                 Case $msg = $GUI_EVENT_CLOSE
            GUIDelete ($FormNecromancer)    
         Case $msg = $Button1
            MsgBox(0,"", "FCR Bps for Necromancer is: 0, 9, 18, 30, 48, 75, 125", 5)
         Case $msg = $Button2
            MsgBox(0,"", "FCR Bps for Necromancer TO is: 0 6 11 18 24 35 48 65 86 120 180", 5)
         Case $msg = $Button3
            MsgBox(0,"", "FHR Bps for Necromancer is: 0, 5, 10, 16, 26, 39, 56, 86, 152, 377", 5)
         Case $msg = $Button5
            GUIDelete ($FormNecromancer)
        Case $msg = $Button4
            MsgBox(0,"", "FBR Bps for Necromancer is: 0, 6, 13, 20, 32, 52, 86, 174, 600", 5)
        Case $msg = $Button6
    EndSelect
WEnd
         Case $msg = $Barbarian
#Region ### START Koda GUI section ### Form=
$FormBarbarian = GUICreate("Form3", 633, 447, 285, 315)
$Button1 = GUICtrlCreateButton("FCR Bps", 528, 16, 89, 33, 0)
$Button2 = GUICtrlCreateButton("FHR Bps", 528, 56, 89, 33, 0)
$Button3 = GUICtrlCreateButton("FBR Bps", 528, 96, 89, 33, 0)
$Button5 = GUICtrlCreateButton("Exit", 520, 376, 97, 57, 0)
$Label1 = GUICtrlCreateLabel("Barbarian", 16, 16, 49, 17)
$Button6 = GUICtrlCreateButton("Button6", 32, 144, 193, 249, 0)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###
$Msg = 0
While 1
    $Msg = GUIGetMsg()
    
    Select
                 Case $msg = $GUI_EVENT_CLOSE
            GUIDelete ($FormBarbarian)  
         Case $msg = $Button1
            MsgBox(0,"", "FCR Bps for Barbarian is: 0, 9, 20, 37, 63, 105, 200", 5)
         Case $msg = $Button2
            MsgBox(0,"", "FHR Bps for Barbarian is: 0, 7, 15, 27, 48, 86, 200", 5)
         Case $msg = $Button3
            MsgBox(0,"", "FBR Bps for Barbarian is: 0, 9, 20, 42, 86, 280", 5)
         Case $msg = $Button5
            GUIDelete ($FormBarbarian)
        Case $msg = $Button6
    EndSelect
WEnd
         Case $msg = $Paladin
#Region ### START Koda GUI section ### Form=
$FormPaladin = GUICreate("Form3", 633, 447, 285, 315)
$Button1 = GUICtrlCreateButton("FCR Bps", 528, 16, 89, 33, 0)
$Button2 = GUICtrlCreateButton("FHR Bps Spear", 528, 56, 89, 33, 0)
$Button3 = GUICtrlCreateButton("FHR Bps", 528, 96, 89, 33, 0)
$Button5 = GUICtrlCreateButton("Exit", 520, 376, 97, 57, 0)
$Label1 = GUICtrlCreateLabel("Paladin", 16, 16, 39, 17)
$Button6 = GUICtrlCreateButton("Button6", 32, 144, 193, 249, 0)
$Button4 = GUICtrlCreateButton("FBR Bps", 528, 136, 89, 33, 0)
$Button7 = GUICtrlCreateButton("FBR Bps HS", 528, 176, 89, 33, 0)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###
$Msg = 0
While 1
    $Msg = GUIGetMsg()
    
    Select
                 Case $msg = $GUI_EVENT_CLOSE
            GUIDelete ($FormPaladin)    
         Case $msg = $Button1
            MsgBox(0,"", "FCR Bps for Paladin is: 0, 9, 18, 30, 48, 75, 125", 5)
         Case $msg = $Button2
            MsgBox(0,"", "FHR Bps for Paladin Spear is: 0, 3, 7, 13, 20, 32, 48, 75, 120, 280", 5)
         Case $msg = $Button3
            MsgBox(0,"", "FBR Bps for Paladin is: 0, 7, 15, 27, 48, 86, 200", 5)
         Case $msg = $Button5
            GUIDelete ($FormPaladin)
         Case $msg = $Button4
            MsgBox(0,"", "FBR Bps for Paladin is: 0, 13, 32, 86, 600", 5)
        Case $msg = $Button7
            MsgBox(0,"", "FBR Bps for Paladin HS is: 0, 86", 5)
        Case $msg = $Button6
    EndSelect
WEnd
         Case $msg = $Sorceress
#Region ### START Koda GUI section ### Form=
$FormSorceress = GUICreate("Form3", 633, 447, 285, 315)
$Button1 = GUICtrlCreateButton("FCR Bps", 528, 16, 89, 33, 0)
$Button2 = GUICtrlCreateButton("FCR Bps Light", 528, 56, 89, 33, 0)
$Button3 = GUICtrlCreateButton("FHR Bps", 528, 96, 89, 33, 0)
$Button5 = GUICtrlCreateButton("Exit", 520, 376, 97, 57, 0)
$Label1 = GUICtrlCreateLabel("Sorceress", 16, 16, 51, 17)
$Button6 = GUICtrlCreateButton("Button6", 32, 144, 193, 249, 0)
$Button4 = GUICtrlCreateButton("FBR Bps", 528, 136, 89, 33, 0)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###
$Msg = 0
While 1
    $Msg = GUIGetMsg()
    
    Select
                 Case $msg = $GUI_EVENT_CLOSE
            GUIDelete ($FormSorceress)  
         Case $msg = $Button1
            MsgBox(0,"", "FCR Bps for Sorceress is: 0, 9, 20, 37, 63, 105, 200", 5)
         Case $msg = $Button2
            MsgBox(0,"", "FCR Bps for Sorceress is: 0, 7, 15, 23, 37, 52, 78, 117", 5)
         Case $msg = $Button3
            MsgBox(0,"", "FBR Bps for Sorceress is: 0, 7, 15, 27, 48, 86, 200", 5)
         Case $msg = $Button5
            GUIDelete ($FormSorceress)
        Case $msg = $Button4
            MsgBox(0,"", "FBR Bps for Sorceress is: 0, 7, 15, 27, 48, 86, 200", 5)
        Case $msg = $Button6
    EndSelect
WEnd
         Case $msg = $Druid
#Region ### START Koda GUI section ### Form=
$FormDruid = GUICreate("Form3", 633, 447, 285, 315)
$Button1 = GUICtrlCreateButton("FCR Bps Human", 528, 16, 89, 33, 0)
$Button2 = GUICtrlCreateButton("FCR Bps Wolf", 528, 56, 89, 33, 0)
$Button3 = GUICtrlCreateButton("FCR Bps Bear", 528, 96, 89, 33, 0)
$Button5 = GUICtrlCreateButton("Exit", 520, 376, 97, 57, 0)
$Label1 = GUICtrlCreateLabel("Druid", 16, 16, 29, 17)
$Button6 = GUICtrlCreateButton("Button6", 32, 144, 193, 249, 0)
$Button4 = GUICtrlCreateButton("FHR Bps 1hand", 528, 136, 89, 33, 0)
$Button7 = GUICtrlCreateButton("FHR Bps 2hand", 528, 176, 89, 33, 0)
$Button8 = GUICtrlCreateButton("FHR Bps Wolf", 528, 216, 89, 33, 0)
$Button9 = GUICtrlCreateButton("FHR Bps Bear", 528, 256, 89, 33, 0)
$Button10 = GUICtrlCreateButton("FBR Bps Human", 528, 296, 89, 33, 0)
$Button11 = GUICtrlCreateButton("FBR Bps Wolf", 432, 16, 89, 33, 0)
$Button12 = GUICtrlCreateButton("FBR Bps Bear", 432, 56, 89, 33, 0)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###
$Msg = 0
While 1
    $Msg = GUIGetMsg()
    
    Select
                 Case $msg = $GUI_EVENT_CLOSE
            GUIDelete ($FormDruid)  
         Case $msg = $Button1
            MsgBox(0,"", "FCR Bps for Druid Human is: 0, 4, 10, 19, 30, 46, 68, 99, 163", 5)
         Case $msg = $Button2
            MsgBox(0,"", "FCR Bps for Druid Wolf is: 0, 6, 14, 26, 40, 60, 95, 157", 5)
         Case $msg = $Button3
            MsgBox(0,"", "FCR Bps for Druid Bear is: 0, 7, 15, 26, 40, 63, 99, 163", 5)
         Case $msg = $Button5
            GUIDelete ($FormDruid)
        Case $msg = $Button4
            MsgBox(0,"", "FHR Bps for Druid 1hand  is: 0, 3, 7, 13, 19, 29, 42, 63, 99, 174, 456", 5)
        Case $msg = $Button7
            MsgBox(0,"", "FHR Bps for Druid 2hand is: 0, 5, 10, 16, 26, 39, 56, 86, 152, 377", 5)
        Case $msg = $Button8
            MsgBox(0,"", "FHR Bps for Druid Wolf is: 0, 9, 20, 42, 86, 280", 5)
        Case $msg = $Button9
            MsgBox(0,"", "FHR Bps for Druid Bear is: 0, 5, 10, 16, 24, 37, 54, 86, 152, 360", 5)
        Case $msg = $Button10
            MsgBox(0,"", "FBR Bps for Druid Human is: 0, 6, 13, 20, 32, 52, 86, 174, 600", 5)
        Case $msg = $Button11
            MsgBox(0,"", "FBR Bps for Druid Wolf is: 0, 7, 15, 27, 48, 86, 200", 5)
        Case $msg = $Button12
            MsgBox(0,"", "FBR Bps for Druid Bear is: 0, 5, 10, 16, 27, 40, 65, 109, 223", 5)
        Case $msg = $Button6
    EndSelect
WEnd
         Case $msg = $CharExit
             If GUICtrlRead($slider1) = 10 Then 
                 Exit
                 EndIf
             MsgBox (0, "Cant exit", "You cant leave before you donated some more.")
;            MsgBox (1, "Cant exit", "You cant leave before you donated some more.")
         Case $msg = $GUI_EVENT_CLOSE
            Exit            
    EndSelect
WEnd

Func PAUSE()
Exit
EndFunc

;#Region ### START Koda GUI section ### Form=
;$Form3 = GUICreate("Form3", 633, 447, 320, 248)
;$Button1 = GUICtrlCreateButton("FCR Bps", 528, 16, 89, 33, 0)
;$Button2 = GUICtrlCreateButton("FHR Bps", 528, 56, 89, 33, 0)
;$Button3 = GUICtrlCreateButton("FBR Bps", 528, 96, 89, 41, 0)
;$Button5 = GUICtrlCreateButton("Exit", 520, 376, 97, 57, 0)
;$Label1 = GUICtrlCreateLabel("Amazon", 16, 16, 42, 17)
;$Button6 = GUICtrlCreateButton("Button6", 32, 144, 193, 249, 0)
;GUISetState(@SW_SHOW)
;#EndRegion ### END Koda GUI section ###
;$Msg = 0
;While 1
;   $Msg = GUIGetMsg()
;   
;   Select
;        Case $msg = $Button1
;           MsgBox(0,"", "FCR Bps for Amazon is: 7, 1,2, ,345,13, 513,45 1,345 ,135 ,1354", 5)
;        Case $msg = $Button2
;           MsgBox(0,"", "FHR Bps for Amazon is: 7, 1,2, ,345,13, 513,45 1,345 ,135 ,1354", 5)
;        Case $msg = $Button3
;           MsgBox(0,"", "FBR Bps for Amazon is: 7, 1,2, ,345,13, 513,45 1,345 ,135 ,1354", 5)
;        Case $msg = $Button5
;           Exit
;       Case $msg = $Button6
;   EndSelect
;WEnd

Thanks in advance, GeekS / Gnu.

GNUcalculator_1.3.au3

Link to comment
Share on other sites

You've got multiple Event loops! You need to consolidate your GUI and Tray event loops into one. The problem you're having is that your tray event loop is starting before your GUI is created.

Oh and you might want to use functions instead of writing all of your code in one giant select statement (i.e. _CreateAmazonGUI for the first case statement). Makes it easier to follow and is a better structure for event loops.

Edited by zorphnog
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...